Server-side workflows against Service Link updated parameter/data

Is there a way to attach any server-side workflows to service link inbound updates/data other than what is available via parameter mapping and prebuilt functions? I need to manipulate a piece of data that is being updated in to a field by service link inbound message beyond what is available via prebuilt functions...
Thanks.

I could probably do it in the XSL, but my goal is to keep the agent configuration, parameter mappings and transformation generic as possible so that it can be reused without modification. For example, I have agent configuration for interacting with an external system, that is passing a certain number of parameters back and forth, but the actual use of these paramters may be different from one service or task to another that is interfacing with this same external system. So the parameter I need to add some logic to for this instance of the task may be representing something different from another task call, even if same parameter is used to carry that data across.
Adding the logic and manipulation in the transformation will work for us if we can override and use different transformation in the task plan settings, similar to how we can override the parameter mappings, but that is not available today...

Similar Messages

Establish a connection through RF modem's on client & server side & to set up PPP communication for data transfer

hi
can any1 over here help me out in how to establish connection between 2 RF modem's for data transfer , between client & server USing LABVIEW?
I want to establish a connection between 2 PC's through RF modem on client & server side & to set up PPP communication for data transfer.
(I have tried data transfer through RS-232 using TCP/IP whn the 2 PC's are connected over ethernet... which is working.
I also tried connecting loopback cable between 2 PC's COM port & geting data transfer using VIsa configure serial port & other visa functions ... which is working)
can u guide me how to establish connection between 2 RF modem's using LABview?
& how does the data transfer take place between 2 RF modems through RS-232?
is it using TCP/IP?
If you got any links to go abt this issue do send me related links .. or any examples .....
I am currently using Labview version 8.
Waiting in anticipation.. reply ASAP..
thanking you
Regards
Yogan..

Howdy yogan,
Maybe you could clarify a few things for me, and we'll see how we can help ya. TCP/IP protocol occurs through an ethernet connection; RS-232 communication occurs through an RS-232 serial connection, typically through a cable that has a DB9 connector on both ends. Do you mean that the RF modems in question have the option to communicate via RS-232 and/or via TCP/IP ethernet? Specific information like the manufacturer of your RF modems, the model number of your RF modems, and how you connect the modems to the PC would enable us to give you more efficient support.
You can check our Instrument Driver Network (IDNet) to see if a plug-and-play/IVI driver already exists for your RF modem. (You'll need to know its manufacturer and model number.) In the case that you do find an IDNet driver for your modem, you can use this KnowledgeBase article for instructions on how to use the driver.
Another excellent resource to consider is the NI Example Finder. You can access this within LabVIEW by navigating to Help»Find Examples and then searching for serial or TCP/IP examples.
Message Edited by pBerg on 03-10-2008 04:35 PM
Warm regards,
pBerg

Server Side Flash Encoding Service

Does anyone have any recommendations for a server side Flash
Video Encoder? I have a large library (1.3TB) of .mov files that I
want to encode into Flash 9 H.264 so I don't think I have a CPU to
handle and I wanted an API. I found
http://fastencoding.com with an
XML API but I wanted some other recommendations/comments before I
signed up.

I have done that temporarily, but we were hoping to do this
without placing a Flash SWF on the page. We are building a
troubleshooting page, and want to keep as many variables out of the
calculations as we can. IE, if Javascript is the issue, then a
Javascript to tell us the Flash version would be a bad idea. If
Flash is the issue, then a flash element would be a bad idea. If we
keep all of the calculations on the server-side, and not on the
client-side, then we know that nothing of the clients is messing
with the information displayed.

WSUS Event 10032 The server is failing to download some updates

Hi,
we receive this error message every 6 hours on our WSUS-server:
Log Name:      Application
Source:        Windows Server Update Services
Date:          2014-02-26 09:56:26
Event ID:      10032
Task Category: 7
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      %Computer%
Description:
The server is failing to download some updates.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">10032</EventID>
    <Level>2</Level>
    <Task>7</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-26T08:56:26.000000000Z" />
    <EventRecordID>567460</EventRecordID>
    <Channel>Application</Channel>
    <Computer>%Computer%</Computer>
    <Security />
</System>
<EventData>
    <Data>The server is failing to download some updates.</Data>
</EventData>
</Event>
The SoftwareDistribution.log shows a couple of these messages for different items:
2014-02-24 04:43:22.509 UTC Info WsusService.15 ContentSyncAgent.WakeUpWorkerThreadProc Processing Item: be885bda-e4e2-4b3b-92f0-d4b4e31428e7, State: 6
2014-02-24 04:43:22.525 UTC Error WsusService.15 ContentSyncAgent.VerifyCRC Could not find file 'D:\WSUSrepository\WsusContent\FB\904517558197FEC77082AEFD6885106590744CFB.cab'.
   at Microsoft.UpdateServices.ServerSync.ContentSyncAgent.VerifyCRC(String fileLocalPath)
   at Microsoft.UpdateServices.ServerSync.ContentSyncAgent.VerifyFile(String fileLocalPath)
   at Microsoft.UpdateServices.ServerSync.ContentSyncAgent.WakeUpWorkerThreadProc()
   at System.Threading.ExecutionContext.runTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
2014-02-24 04:43:22.525 UTC Error WsusService.15 ContentSyncAgent.WakeUpWorkerThreadProc Importing file 904517558197FEC77082AEFD6885106590744CFB caught exception at VerifyFile: System.IO.FileNotFoundException: Could not find file 'D:\WSUSrepository\WsusContent\FB\904517558197FEC77082AEFD6885106590744CFB.cab'.
File name: 'D:\WSUSrepository\WsusContent\FB\904517558197FEC77082AEFD6885106590744CFB.cab'
   at Microsoft.UpdateServices.ServerSync.ContentSyncAgent.VerifyCRC(String fileLocalPath)
   at Microsoft.UpdateServices.ServerSync.ContentSyncAgent.VerifyFile(String fileLocalPath)
   at Microsoft.UpdateServices.ServerSync.ContentSyncAgent.WakeUpWorkerThreadProc()
   at Microsoft.UpdateServices.ServerSync.ContentSyncAgent.WakeUpWorkerThreadProc()
   at System.Threading.ExecutionContext.runTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
2014-02-24 04:43:22.525 UTC Warning WsusService.15 ContentSyncAgent.WakeUpWorkerThreadProc Invalid file deleted: D:\WSUSrepository\WsusContent\FB\904517558197FEC77082AEFD6885106590744CFB.cab
2014-02-24 04:43:22.525 UTC Info WsusService.15 ContentSyncAgent.ContentSyncSPFireStateMachineEvent ContentSyncAgent firing Event: FileVerificationFailed for Item: be885bda-e4e2-4b3b-92f0-d4b4e31428e7
I already checked updates on the WSUS console and all approved updates have File status "Ready for install". The .cab-files mentioned in the SoftwareDistribution.log does not exist but i cannot see which updates failed to download.
We also use Secunia CSI to update applications like Adobe Flash through WSUS.
Windows Server 2008 R2
WSUS 3.0 Version 3.2.7600.226
Thanks
Maik

Hi
Manjunath,
i
know this thread and has verified all settings and they are ok.
Regards,
Maik

Insert data 32K into a column of type LONG using the oracle server side jdbc driver

Hi,
I need to insert data of more than 32k into a
column of type LONG.
I use the following code:
String s = "larger then 32K";
PreparedStatement pstmt = dbcon.prepareStatement(
"INSERT INTO TEST (LO) VALUES (?)");
pstmt.setCharacterStream(1, new StringReader(s), s.length());
pstmt.executeUpdate();
dbcon.commit();
If I use the "standard" oracle thin client driver from classes_12.zip ("jdbc:oracle:thin:@kn7:1521:kn7a") every thing is working fine. But if I use the oracle server side jdbc driver ("jdbc:default:connection:") I get the exception java.sql.SQLException:
Datasize larger then max. datasize for this type: oracle.jdbc.kprb.KprbDBStatement@50f4f46c
even if the string s exceeds a length of 32767 bytes.
I'm afraid it has something to do with the 32K limitation in PL/SQL but in fact we do not use any PL/SQL code in this case.
What can we do? Using LOB's is not an option because we have client software written in 3rd party 4gl language that is unable to handle LOB's.
Any idea would be appreciated.
Thomas Stiegler
null

In rdbms 8.1.7 "relnotes" folder, there is a "Readme_JDBC.txt" file (on win nt) stating
Known Problems/Limitations In This Release
<entries 1 through 3 omiited for brevity >
4. The Server-side Internal Driver has the following limitation:
- Data access for LONG and LONG RAW types is limited to 32K of
data.

How to make html file on server side from the data entered in text area

Hi!
I want to know how to make .html file on server side. Like if i enter the data in text area ( or like we normaly see when we write mail that editor) and we can use html tages in it and when user submit form all the data in that field will be saved on server side as an html formate. Is it possible to do so??? or any ruff idea how to design it???

Erm ...
Whats the problem with that?!
Ok, here the code ...
String myparameter = request.getParameter("paramname");
String htmltemplate = "<html>\n"
                     +"<head><title>demo</title></head>\n";
                     +"<body>@parametertag@</body>\n";
                     +"<html>";
String htmlpage = htmltemplate.replaceAll("@parametertag@",myparameter);
File yourHTMLfile = new File("wheredoyouwannagotoday.html");
FileOutputStream fos = new FileOutputStream(yourHTMLfile);
fos.write(htmlpage.getBytes());
fos.close();You're done.
Happy Coding! :-) ©

Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

While saving a workflow using SharePoint designer on a SharePoint site, I get the following error:
Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
Steps to recreate error:
Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
Access the list using SharePoint Designer 2013, in the workflow section, click new workflow.
In the new workflow dialog, enter workflow details, click save (see screenshot below).
Error message is displayed as below:
After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
Workaround
When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
Notes
Workflow Manager 1.0 is installed.
The site has been registered with Workflow manager using Register-SPWorkflowService
cmdlet.
Any clue on why is this happening?

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

Hello,
I have the following scenario for the installation of EPM 2013 environment:
1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
"Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
I've tried:
a. Restart SPD2013;
b. Restart Server 2013 and Sharepoint Workflow 1.0;
c. Reinstall and reconfigure Workflow 1.0
And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
Can anyone help me, I'm in the middle of a deployment to a customer.
Print of alert

How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
http://technet.microsoft.com/en-us/library/cc262108.aspx
"If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

Error getting the server-side naming service functionality

Hi all,
we are currently setting up the CTS+ activity based transport scenario. Everything seems to be working fine, however, we have to import each transport twice...
Before I go into detail in the error we get I will first describe our landscape. All the configuration we did was done in debate with SAP.
We use the SAP Solution manager (ehp1 SP 4) as the CTS+ server as recommended by SAP and have an NWDI system of which we only use the components DTR and CBS (since CMS is not used anymore in the activity based transport). We have defined three logical ports/RFCs. CTSCONFIG points to the NWDI system. CTSDEPLOY is running on the java stack of the solution manager and is only used for portal content (=epa) transports. CTSDEPLOY_DI is pointing to the NWDI system and is used for all NWDI (=dip) changes. The NWDI is running ehp1 SP3.
In STMS I defined all the non-abap systems (and configured them to use CTSDEPLOY_DI) and created the following transport route:
upload system (IMP) -> DEV -> ACC -> QAS -> PRD
I first attached the used dependencies in a transport request (SAP_BUILDT, EP_BUILDT, etc) these imported just fine. Then I did the SCA files which contain our custom code. I extracted these from the assemble step on our current NWDI system which will be removed as soon as we switch to the new CTS+ environment.
When we import the transport into the runtime systems then we see the DTR and CBS be filled sucesfully for this specific system. However, the transport request itself always fails with errorcode 12 and the error is:
Error during export service registration: Error getting the server-side naming service functionality during getInitialContext opera
tion. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Error getting the server-side naming service functionality during getInitialContext operation.
Error in execution of Web services CTSDEPLOY_DI , exception is cx_cts_file_import_failed
File import canceled
When we then reimport the same transport it will go the second time fine. This is no problem during the setup but will not be workable when we go live ofcourse. Is there anyone who had this issue before as well and have a solution for it?
Kind Regards,
Nico van der Linden...

Hello Nico,
I would need the java trace files to get more info on this issue, but you can start troubleshooting this error with these notes:
#1172252: CTS+, 'attach file': Troubleshooting Guide;
#1003674: Enhancement for non-ABAP systems in CTS;
#1155884: CTS+, configuration 'close coupling': Troubleshooting guide;
Pay special attention to parameter NON_ABAP_WBO_CLIENT, whether it's correctly set on your CTS+ system(s).
Note #1003674 is a must for any CTS+ systems to work properly, as well as having an updated version of the transport programs (tp and R3trans).
Lastly, note #1155884 goes through some JCoException exceptions that commonly take place during CTS+ transports. But again, you need to check the underlying trace files to find the root cause of your issue.
I hope this information helps.
Best regards,
Tomas Black

SharePoint Designer 2013: Server-side activities have been updated

When developing custom activities for SharePoint 2013 Workflows, I ran into the problem that SharePoint Designer prompts “Server-side activities have been updated. Please restart SharePoint designer” every time when you try to create a new workflow.

Hi,
I recommend to clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
< user profile>\appdata\local\microsoft\websitecache\<sitename>
http://social.technet.microsoft.com/Forums/en-US/5796972e-3a92-4306-8cf1-e1e7b9ab9635/error-while-saving-a-workflow-via-sharepoint-designer-serverside-activities-have-been-updated-you?forum=sharepointcustomization
If the issue still occurs, please re-install SharePoint Designer.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Still!!! server side activities have been updated. restart SPD to use the updated version of activities

server side activities updated... restart SPD to use latest activities"
pretty huh? I have been working with SP13 online and a custom list which I would simply like to add a workflow too,
When creating a workflow I receive this error, I have uninstalled SPD I have cleared/deleted cache files in the following locations:
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
< user profile>\appdata\local\microsoft\websitecache\<sitename>
restarted computer
reinstalled SPD
and...same message "server side activities updated... restart SPD to use latest activities"
Same Image as above
Now what else can I do, there aren't any language packages other than the default English, and a lot of people find this issue with no luck as to a resolution, need an answer that will work

In my case the solution to this problem was the following. I discovered that the contents of <user profile>\AppData\Local\Microsoft\WebsiteCache\<sitename>\<version> was empty aside from Activity.xml for the website in question. This directory
should actually download the following list of files from the server in order for the workflows to operate in SPD. This is not the case when things go wonky.
Microsoft.ReportingServices.SharePoint.UI.WebParts.Proxy.dll
Microsoft.SharePoint.WorkflowServices.Activities.Proxy.dll
Microsoft.Web.Design.Client.dll
Newtonsoft.Json.dll
ProxyAssembly.xml
System.Net.Http.dll
System.Net.Http.Formatting.dll
System.Net.Http.Formatting.xml
System.Net.Http.xml
System.Web.Entity.Proxy.dll
System.Web.Extensions.Proxy.dll
So I found that if I copied these from another websitecache directory that is working or perhaps copying them from another machine where SPD is working properly that my workflows will start working once again. I haven't checked but I'm certain that you could
hunt down all these dll's manually on the server as well.

Server-side authentication for web services

I was hoping to use Azure's server-side authentication for a HTML/JS web app. Some things are a bit unclear. For example, if a new user authenticates via Facebook, I want to create an associated record on the server-side and associate extra data with the
user, irrespective of the service used to log in. If they log in again, I want the client to be able to get this extra data (eg preferences) from the server. On the back-end, I also want to be able to update particular fields of this record that the user cannot
change themselves. I know how to go about this in a plain Node.js backend, but not sure how some of these basic things map to using Azure's services.

Once the user logs in, you will have their information available to your server scripts. So one option is to use a custom API (or a Mobile Services Table) to insert/read/update the user data. You would protect this endpoint so that only logged-in users can
access it, and then access the
user object to obtain an ID an associate it in a table row. Lookups could be performed by similarly querying for the ID.
In terms of some fields being restricted, you could remove these from the update request itself.
Some pointers that might be helpful:
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-html-get-started-data/
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-html-call-custom-api/
http://azure.microsoft.com/en-us/documentation/articles/mobile-services-html-authorize-users-in-scripts/

Updating form with server-side scripts

Hi
For security reasons, we want to do a web service call with only server side scripts. That way we have full control over the access to the wsdl and no problems with the security.
However, if I try to run the scripts on server-side I get no update of the data in the form... so what to do to solve that problem? Anybody with experience from that?

To make a small update I've been messing around with various different things to be able to achieve the goal. One of the initial problems was that the Designer actually manages to create two different SOAP addresses, one of them is the correct and secure way and the other one is direct to the data source, which would be an unsecure and blocked route. That changed things a bit when I realized that.
But still, the problem remains. If I run the script Client-Side, it works but is not an acceptable solution. If I run it Server-Side, it can't read the data and doesn't recognize the call to SOAP.connect()...
Does anybody have any experience in webb service connection with server side scripts?

Server Side Links (Node Link): caught exception

HI ,
Following error is showing up in System Audit Trace Logs:
Server Side Links (Node Link): caught exception
I am not able to figure is out why this error is coming.
Can any please explain the reason of this error..
thanks

Hi
Thanks for the link, it is indeed a good example. However, whilst it has some interesting points, it seems to narrowly skirt around the issue i am having (as do most examples in fact).
Perhaps i should have been more clear that the problem i am having relates specifically to entities that have already been persisted, and all i am trying to do is edit them. In the example you sent, if bean-validation fails then the entity is not persisted, so no problems. However, when editing an already persisted entity, form submissions trigger an automatic database update via the EntityManager (provided JSF validations are passed), so my real problem is avoiding this.
Any input appreciated.
-Rich

"RABAX" occurs on server side error while testing asynchoronous web service

I got error while testing asynchronous web service in WS navigator. I have created asynchronouse web service using RFC. Then I configured it in SOAMANAGER. When I tested it, got error "RABAX occurs on server side". Also I got dump in ST22. It is 'UNCHAUGHT_EXCEPTION - CX_SOAP_SEQ_SCD_ERROR'.
I have tested for synchronous web service it works fine. I found a difference in both web service WSDL file for below parameters value -
commit
blocking
transaction
wsrm
I tried different way .. but no solution .. Plz suggest if someone have any idea.....Its very helpfull....

your problem:
Missing class: oracle.tip.adapter.jms.JmsManagedConnectionFactory
Dependent class: oracle.tip.adapter.fw.wsdl.WSDLUtils
Loader: oracle.bpel.common:10.1.3
Code-Source: /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/bpel/lib/orabpel.jar
Configuration: <code-source> in /oraclesoa/oraclesoa/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml
It happens when server is custom installed, try to reinstall it as full version and problem should disappear otherwise your need another full installation to retrieve and replace orabpel.jar file from (or maybe more)

Server-side workflows against Service Link updated parameter/data

Similar Messages

Maybe you are looking for