Service Entry Sheet in ECC 6.0 shipment costing security object?

Does anyone know what security object is being checked during service entry sheet creation? When I run the shipment cost create process in foreground (RV56TRSL) VI04, the program creates and settles the shipment cost, but in background only the shipment cost doc creates the settlement remains open (status A) and I get a message:
You have no authorization for this transaction with movement type 101
My assumption is a different object is being called in background versus foreground but my traces are not showing me anything useful.
thank you

Shipment settlement in ECC 6.0 requires the users to have some version of the MIGO object to prefrom the goods movement. this is a change from 4.7 and prior.

Similar Messages

In which table we can find service entry sheet no to find the actual cost

In which table we can find service entry sheet no to find the actual cost of External service
Service code, Service description Quantity UOM, Vendor, Cost

Hi,
Total Actual Material Cost - Sum up the total cost ENWRT against the AUFNR in the table RESB and display in the report
Total Actual External Service Cost - Provide the field AUFNR in the table EKKN and get the Purchasing document field EBELN & apply this field data in table EKPO get field NETPR and display in the out put
For link between operation & order - Selection criterion is the order number (Field AUFNR table AUFK). The content of field AUFPL has to be used afterwards as selection criterion in the table AFVC. The selection field in this table is again AUFPL and display the field LTXA1..
Kuber

Shipment cost: number of items in service entry sheet

Dear Experts,
Is there a customizing setting that restricts the maximum allowed number of lines in service entry sheets?
Context:
Once I transfer shipment costs, several goods receipt sheets and service entry sheets are created.
I first thought that there was a one-on-one releationship between a shipment cost item and a service entry sheet. I.e. if there are e.g. 7 shipment cost items, than 7 service entry sheets are created.
The shipment cost distribution level is set on "delivery item": if for one shipment cost item, there are 250 delivery items, the cost is distributed all over these 250 delivery items. For each delivery item, a line is created in the service entry sheet. However, in my case 3 service entry sheets are created with on:
- 1st service entry sheet: 99 items
- 2nd service entry sheet: 99 items
- 3nd service entry sheet 52 items
Is there a way to avoid that several entry sheets are created for one . In my case that only 1 entry sheet with 250 items is created after transfer.
Thanks for the help!
Kind Regards
Thiago Santos

If you are not posting the delivery cost on the material value, then use A - Shipment costs item in the item category.
Delivery sub-item - A shipment cost sub-item will be created for every relevant delivery sub-item.
Shipment costs item - One shipment cost sub-item will be created.

Deleted service entry sheet from SRM not posted in ECC

Experts,
SRM 5.0 (Ext classic)
We have a limit PO for 1000GBP. User created a service entry sheet for 880GBP and this was posted in ECC. Then user deleted this entry sheet after which I see 'Error in process' status. RZ20 status shows "Error whilst creating an entry sheet in the backend system. Entry sheet XXX already deleted". Also Service entry sheet in ECC has status 'deleted'.
How come SES in ECC has status deleted but in SRM it shows error in process?
Thanks in advance

Hi Christian,
Thanks for your reply.
But this is what has happened. No the SES was not deleted in ECC before the confirmation was deleted in SRM. Our users don't have access to ECC T-codes.
Also I have checked the time at which the cancellation was created and everything is in sync.
How can i change the status of SES from 'Error in process' to 'posted in backend'?
Please advise
Thanks

Purchase Order: Queries related to Service Entry Sheet (ML81N)

Requirement:
A user exit to be trigger during the changing (update) of service entry sheet, This user exit should have a code which will go and check the credit memo in RSEG- SHKZG where the value is “H” and will check RSEG- LFBNR number with ESSR-LBLNI and compares RSEG- SHKZG with ESSR- NETWR value of the service entry sheet. if the value is less then or more then ESSR- NETWR (service entry sheet) value it should throw an error “"Amount must equal Service Entry”.
If the RSEG- SHKZG value and ESSR- NETWR value are equal it should allow to revoke the service entry sheet.
Scenario: When user clicks on Change button in ML81N for changing the Service Entry Sheet(existing one), an exit should trigger the error message and should not allow to change.
Please suggest how to achieve it, which Exit to use where I should code?

Hi Amol
Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
But depending upon settings, you can change account assignment values such order 1 to order 2
If there are requirement that SES can created for Account assignment F or K. I recommend you to use following approach
1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
3. Perform SES w.r.t to Release Order.
Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
Thanks,
Jagdeep

Query related to Service Entry Sheet for maintenance order

Dear Gurus,
I am little bit confusing while entering SES for maintenance order,
Do we need to enter both Maintenance Order# & Cost Center# in Account assignment tab of SES?
What is impact of entering both in SES?
What is standard procedure of accepting services for maint order?
Thanks in advance.
Regards,
Amol.

Hi Amol
Why you created Framework Order ?.. You can not change account assignment category in service entry sheet..e.g. K-Cost Center.. F- Order
But depending upon settings, you can change account assignment values such order 1 to order 2
If there are requirement that SES can created for Account assignment F or K. I recommend you to use following approach
1. Create a Contract - ME31K with AAC as U- Unknown (If business already have rates negoiated with vendor for services)
2. Create release order with reference to contract and system will prompt you to enter AAC- it can be K or F
3. Perform SES w.r.t to Release Order.
Other Approach can but not strong one.. create two line items in the PO. one with K and Other with F.. then choose the line item at time of SES creation that business want to book the cost on CC or Order.
Thanks,
Jagdeep

Authorization issue in Service Entry Sheet release

Dear All,
In ECC6.0, to release service entry sheet system asks for the authorizations on following objects:
                    M_MSEG_BWE for movement type 101
                    M_MSEG_WWE for plant in purchase order with activity create (01)
But when these authorizations are provided, system also allows receiving of material in the plant as t-code MIGO is provided to all users for displaying material documents.
One solution to this is that we restrict MIGO but it also restricts displaying material document from PO history.
Your expert advised is required.
Thanks & Regards,
Shahzad Shakoor

Hi,
Pls. check in transaction SU24 the Settings for object M_MSEG_WWE -> if you set it for
the TRANSACTION ML81N only, this setting will be not relevant for others transactions.
In SU24 the setting for the authorization M_MSEG_BWE should be changed to "not check"!
Regards,
Edit

Service Entry sheet Archive in MM

Hello everybody,
I want to archive the service Entry sheet in MM, But i cant found the Object for the same.
Please suggest me How to Archive the Service Entry sheet for MM.
thanks

Archive by Archiving PO

How to update sales order number (KAUFN) characteristic in the profitability segment of the PA document created at the time of service entry sheet confirmation, as a result of shipment cost document

Hi,
We have a scenario wherein we create shipment cost documents against delivery. As a result of shipments fully transferred, a PO for freight vendor is automatically created and a service entry sheet confirmation happens. As a result of service entry sheet confirmation, we have Financial accounting, Controlling and profitability analysis documents created. We have a requirement wherein we need to have the characteristic “sales order number (KAUFN)” populated in the profitability analysis document created as a result of service entry sheet confirmation.
Could someone please advice how could this be attained in COPA. Thanks for your help in advance.
Regards,
Sandeep

Hi Ajay,
Thank you for the quick update.
The document is updated to COPA through OKB9 settings. The profitability segment is updated with fields like customer, product, company code, plant, sales area data, profit center, etc; however the sales order number is missing.
Could you please elaborate further how could FI substitution be implemented to call for the FM COPA_PROFITABILITY_SEGMENT through user exit? Are you recommending the substitution through GGB1? What could be the possible validation to call for the user exit to be implemented?
Regards,
Sandeep Kulkarni

Shipment Document, No Purchase Order & Service Entry Sheet generated

Hi Everyone
We have transportation & shipment module configured in our company.
We are running this process from the last 3 years without any problems whatsoever.
But suddenly from the past 1 month we are facing a very serious issue while saving shipment cost document, i.e *no purchase* *order and service entry sheet* is generated on saving the service entry sheet.
A purchase order and a service entry sheet is generated automatically whenever a shipment cost document is saved. All the congifurations & customisations are correctly done as per sap standards and no request have been moved to production which will disturb the above process.
I have scanned the almost all sdn.sap queries for solutions and have incorporated all the suggestions which will help to solve this issue.
But still the problem persists, i.e still no purchase order & service entry sheet is generated automatically after saving the shipment cost document.
All the settings mentioned below are checked thoroughly.
-- assign puachaging data
--maintain acc. assignment cat.
--automatic G/L acc. determination
--automatic determination of CO assignments
Check the following prerequisites for shipment cost processing has maintained or not
-Shipment must marked as relevant for shipment cost
-Shipment must have the required total status set in shipment cost type
-Shipment must have transportation status planned
-Shipment must have service agent
-Maintainiing and assign shipment pricing procedure to shipement cost
-Maintaining condition records,
Please suggest some solutions to the above issue.
Thanks & regards
satish

Hi Sumit
Thanks for responding
In tcode t_56 generate PO is "C", I.e generate po for a validity of 1 month, the item category settings are the same since as before.
But for some reason the system is not generating any purchase order from the past month.
The error message is shown below.
No purchase order item was generated for shipment cost item 0000014950 000001
Message no. VY633
Diagnosis
You have marked the shipment cost item for transmission to the finanacial accounting department. For this transaction, you need an order item. The system has attempted to create an order item, but has not succeeded in doing so.
System Response
Transmission of data to financial accounting without a valid order item is not possible. For this reason, all items that you have marked for transmission are reset.
Procedure
The log displays further information as to why the system could not create an order, although all the settings in Customizing were configured. You can also create an order manually that corresonds to the shipment cost item and then transmit this again.
Thanks
satish

Service Entry sheet Creation for Shipment cost Document

Dear All,
While creating a shipment cost document .A service PO is getting generated in the back ground based on which a service entry sheet is created and LIV is made.But in the configuration we are mapping the Transportation planning point to Purchase organisation alone.
Can some one let me know whether the generation of PO in the back ground for a shipment cost document in the back ground is a standard SAP feature if so can you tell me the configuration steps.
Regards,
K.Vivek

Hi,
Creation of Service PO in shipment cost document is based on the following SPRO setting or T-code.
T code : T_56.
SPRO > LE > Transportation > shipment cost Document > Shipment cost types and item categoires.
Get into the details of item categoires, you can see the indicator Generate PO.
hope this helps.
Harish

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

Text mapping from SAP SRM confirmation to ECC Servic Entry Sheet

How can we map Item and Header texts from SRM confirmations to ECC Service Entry Sheet appropriate fields.

Hello Sanjeev,
FIrst, run report /SAPSRM/GET_TEXT_CUST_ERP in SRM. This report copy texts from backend to SRM.
Then use SPRO to map texts between SRM document and R/3 corresponding document:
SAP Implementation Guide > SAP Supplier Relationship Management > SRM Server > Cross-Application Basic Settings > Text Mapping > Text Mapping for Inbound and Outbound Texts
Standard Text ID for ERP lines of service begin with "L". They are linked to customzing object ESLL.
For more details, have a look at R/3 function module MMPUR_GET_TEXT_CUST_DATA.
Regards.
Laurent.

99 items in service entry sheet

Hello,
Concerning the transfer of shipment cost items to MM / FI.
This is what's described in notes notes 333656 and 198678:
If you transfer more than 99 account assignment lines to MM, than more than one service entry sheet will be created.
Why this is build up that way? Why not just create 1 service entry sheet for all lines?
Is there a way to avoid that more than 1 service entry sheet is created if more than 99 account assignment lines are transferred? Can you change the maximum number of items in a service entry sheet from 99 to 999 items?
e.g. if you transfer a shipment cost item with 320 account assignment lines, it should not be split up into
    -    3 service entry sheets with 99 items
    -    1 service entry sheet with 23 items
BUT only one service entry sheet should be created with 320 lines...
The reason why this is needed in our case is that we recenty changed the cost distribution from the item categories from "delivery"-level to "delivery item"-level. Because of this change, there are many more account assignment lines per shipment cost item and we get more than 99 account assignment lines per shipment cost item. In some reporting programs (Z*-programs) which do not take into account that one shipment cost item can be transferred into more than one service entry sheet? It's a huge work to correct these reporting programs...
kr,
Alexander

Hi Alexander,
According to the standard system design there is a limit for up to 99 DIFFERENT account assignment lines per whole service
entry sheet document (not per service line in SES).
This is due to technical limitation of the field ESKN-ZEKKN of type NUMC(lenght 2). I am sorry that I can not provide you a solution within the standard for your problem.
As a workaround, you need to split the services in such a way that you have less then 100 different account assignment combinations.
If you believe that this feature is in general interest of other SAP users, you may apply to get in touch with a SAP User Group ( i.e. DSAG
or ASUG) in order to check the feasibility for opening a development request, aiming to enhance SAPs product portfolio offering for future
releases. Further details about this could be found in the link
http://service.sap.com/rollin
Please see the note:
11      Requested function not contained in standard system
Regards,
Edit

Service Entry sheet to be set as Not accepted status

Hi
After flagging the Transfer check box in the Settlement Tab in item details of shipment cost document(VI03), the Purchase order(ME23N) and Service entry sheet(ML81N) are automatically getting generated. PO and Service entry sheet numbers can be seen in Service Procurement tab.
Question 1: When I separetely look into PO, I am unable trace back the flow. I mean, there is no reference of Shipment cost number in PO.
Question 2: I want the service entry sheet to get on hold/not accepted status so that i can add the list of services performed by the Forwarding agent / service agent mentioned in Shipment cost document.
Question 3: I have made Release strategy for Service entry sheet which is properly working when i am accepting the entry sheet manually. But it is not working when the shipment cost document is triggering PO and Service entry sheet automatically. Actually, It should hold the service entry sheet from not being accepted.
Note: This subject is a mix of Transportation (Logistics Execution) and External Service Management (Materials management). The moderator of this forum can take a call on placement of this thread under suitable section.
Thanks
Maruthi Ram
Edited by: MARUTHI RAM on May 26, 2009 9:31 PM
Edited by: MARUTHI RAM on Jun 4, 2009 2:50 AM
Edited by: MARUTHI RAM on Jun 5, 2009 8:29 PM

not solved.

Service Entry Sheet in ECC 6.0 shipment costing security object?

Similar Messages

Maybe you are looking for