Service Notification forwarded via Services for Object

Dear Experts,
Appreciate your contribution to the below requirement:
When forwarding a service notification via "Send Object with Note" function, the recipient when retrieving the message in SAP Inbox could only access the attachment in Display mode.
Likewise, if the message is routed to the recipient's outlook inbox, the attachment is in Text file format.
Functionality needed here is:
1) When accessing via SAP Inbox, the attachment should be able to be opened in Change mode.
2) When retrieving the message via Outlook inbox, link should be provided for user to launch SAP and open the service notification in Change mode.
Is the above requirements achievable without customization?
Regards.
Khor, Lee Hong

Similar Messages

Steps to create Service Notification in Customer Service Module

Hi,
Can anyone let me know the steps involved and the process to create Service Notification in Customer Service Module.
Regards,
Ram

Hello SAP Guru's,
I am Shankar from chennai.
At present i have assigned to do the Customer Service process for our project.
I had tried the BPP method for doing it.
When i tried the Depot repair process from BPP i got error during billing process.
Can any one guide me with the step by steps procedure to do the senerio.
i searched the web for the process. but i couldnt able to find it.
If any one has the complete step by step procedure to do the process pls help me.
my id is ponshankar gmail com.
Thanks in advance
Warm regards,
Shankar

Cannot start the Web Service i created via Services

Hi there,
I appreciate if someone could assist me please?
I have created a service, i can see the service i have created in the "Services". I am using Windows 8.1.
However when i try to start the service i get the error:
"Windows couldn't start the service on the Local Computer. Error 5: Access is denied".
I followed the guide below to ensure the user is part of the admin group but i still get the above error:
Fix: Access Is Denied error with Local Services in Windows 8.1
Kind Regards,

Hi IndusKing,
>>"Windows couldn't start the service on the Local Computer. Error 5: Access is denied".
Based on your description, it seems that you have hosted the WCF Service using the Windows Service. In my mind it is the permission issue, please try to check this article for more information:
http://www.dotnetspider.com/resources/45390-Windows-could-not-start-service-local-computer-Error-5-Access-denied.aspx .
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Thanks for replying to me. I got my service to start!
I did this by copying the contents of the App.config that i have in my web service project to the app.config in the Windows Service application that hosts my service.
I then ran the following command in VS2012 command prompt:
installutil.exe "Full Path To Window Service Host Exe"
Went into "Services" then I did right click > start. The service started up.

Creation of Service Notification and filling certain fields

Hi,
I am trying to create a service notification document from inside dunning activity (TR FBVB).
The steps that I followed are
A custom FM is configured which is called after dunning event ISU_DUNNING_BLOCK_DEVICE_0350. This std FM creates a disconnection order number which can be seen via TR EC87. This EC87 transaction has a tab for service orders created via it.
The custom FM configured is called after standard FM is used to get disconnection order and then we are using FM ISU_S_DISCDOC_CHANGE. This FM creates the relevant service notification document for the disconnection order.
The problem we face in here is the equipment number, connection number, installation, material, serial number created via the FM ISU_S_DISCDOC_CHANGE is blank.
Our requirement is to have the service notification created via the above fields populated in it.
Kindly suggest is there any alternative to get those fields populated in the service notification (TR IW53)
Regards,
Imran

hi eshwar
you can create service order by using the service notification,
create service notification using IW54 after entering the details select the Service notification in the menu and select the service order create OR press the Order buttom ,and enter the order type you want to create
hope this will clear you
regards
thyagarajan

Automatic creation of Service PO via Service PR

Dear Friends,
We want to create Service PO automatically via service PR generated in PS module using account assignment category Network and service conditions per plant/ POrg/ vendor combination.
What are prerequisities and settings required to create PO automatically?
Please give your inputs.
Regards
Ram

Dear,
For Automatic PO with PR(Individuals) Settings
1) Both in Vender master & Material Master in purchase view check the ckeckbox as automatically PO.
2) Maintain Purchase Info Via ME11 with price and conditions and also Validty.
3) Maintain Source List ME01.
4) ME59N make Auto PO but remember that Other Conditions like Packaging & Forwrding or Fright charges you have to maintain Manually.
other way
Go to Document Overview in ME21N, select the PR and Adopt and maintain all the Rates & other condition.
May this help u
Regards,
Pardeep Malik

Service order - Service notification urgent

Dear friends,
I need to configure Service order through service notification (T-codeIW51).
Here I am explaining my client requirement, they will do service for their finished good (material) after warrant period. In this scenario they will need to take material in to stock with out value because it is after warrantee. They will do necessary repairs, during the repairs they need to capture labour cost and if they replace any material that cost also. After repair they will bill and send to customer.
If any body knows this process, please tell me how to configure.
I tried through service notification IW51, created and saved, I dont how process further,
If any body known kindly explain to me step by step its very urgent.
Reg
Eswar
9916430448

Dear Eswar,
Once you save the Service Notification,,,,,,,You receive the Defective goods With movment type343-
Stock will shows automatically in "Inspection lot".
If any Defective founds.
Obtain customer acknowledge from Customer.
If material Out of Waranty.
make a delivery Challan with ref to Service notification.
Make Service Invoice.
Reply me you need any doubts.
Regards
ram

Get the Sales Order number from Service Notification

Hi Experts,
Please let me know if there are any BAPI's or standard Function modules to get the Sales order for a given Service Notification number.
Thanks a lot

Hi Ashish,
Hope the listed BAPI's let you solve the issue:
BAPI_SERVNOT_CLOSE Complete service notification
BAPI_SERVNOT_CREATE Create service notification
BAPI_SERVNOT_DEL_DATA Delete Items, Causes, Activities, Tasks, Partners of the service notif.
BAPI_SERVNOT_GET_DETAIL Get details about a service notification
BAPI_SERVNOT_MODIFY_DATA Modify a service notification or associated subdata
BAPI_SERVNOT_POSTPONE Postpone service notification
BAPI_SERVNOT_PUTINPROGRESS Put in process a service notification
BAPI_SERVNOT_SAVE Save service notification
BAPI_SERVICENOTIFICAT_CREATE Create service notification
BAPI_SERVICENOTIFICAT_GETLIST Select service notifications according to customer or contact person
BAPI_SERVNOT_CHANGEUSRSTAT Change the user status of a service notification
Regards,
Soundarya.

Urgent: Replication of CRM Service Ticket to PM Service Notification in ECC

Hi Friends,
I have a Client requirement where
1) a Service Ticket is created on CRM IC Webclient.
2) This Service Ticket is then Replicated in Plant Maintemance (PM) Service Notification on ECC.
3) Then the Service Notification is executed in the PM Module through PM Service Order.
4) Then the service order status is updated on the Service Ticket.
5) The PM Service Notification and PM Service Order details should be visible from the Service Ticket window in IC Webclient.
I would appreciate if you can provide any information/details on how to replicate a CRM Service Ticket to Plant Maintemance (PM) Service Notification on ECC.
Any information on the above scanario setup and execution will be greatly helpful to me.
If you have any docs relevant to this pls send it accross to me.
My mail ID [email protected]
Pls help me out.
Thanks in advance and warm regards
Purnendu

Hello,
this is a topic where i´m also very interested and i already did some analysis on this.
There is now standard way from SAP to replicate CRM Service Request to CS Service Notification.
I´m thinking about a customer solution using a RFC function call to create the CS Service Notification in background.
Best regards
Manfred

Service order and service notification

Hello folks ,
could someone let me know please if ther's an BAPI or other way to create service order with a reference to service notification so that when calling the BAPI or function mudole to create the service order its get the entire data from the reference of the service notification .
example of this situation is when executing IW52 transaction nd from the main screen of change service notification a button of service order takes the data from the service notification to the service order .
Regards,
Hertzel.

Hi,
Please make use of this 2 FM. (You have to use both the FM ).
"QM06_FM_TASK_RMA_ORDER_CREATE" and
"QM06_RMA_ORDER_CREATE".
Hope this will help you.
Regards,
Smart Varghese

Service Notifications / Service Order Links

Hi All -
I need to create a service notification and a service order related to that service notification - and I can successfully create both using BAPIs (BAPI_ALM_NOTIF_CREATE, etc).
However, I can't seem to figure out how to create the reference between the two so that the documents refer to each other in their document flow - I can get the service order to refer to the service notification (by entering the notification number in the input parameters) - but the service notification does not refer to the service order in the doc flow after the order is created.
I'm obviously not doing this right - I can't seem to get the relationship between the two to work! Any help is appreciated.
Thanks -
Abby

Hi,
i think after creating a service notification you would have to create a repair order(VA01) with servicable material and every thing ,and then create the service order in IW31 with a link to Repair order , hope this works

Service notification blind receipt(urgent)

hi all
sn is not updating ,in blind receipt i am able to see only one part 2nd part i am unable to see.only one part is triggered and 2nd part is not triggered.
can any one tell me logic
rewards
rajendra

Dear Eswar,
Once you save the Service Notification,,,,,,,You receive the Defective goods With movment type343-
Stock will shows automatically in "Inspection lot".
If any Defective founds.
Obtain customer acknowledge from Customer.
If material Out of Waranty.
make a delivery Challan with ref to Service notification.
Make Service Invoice.
Reply me you need any doubts.
Regards
ram

Object type for service notification?

Hi guys,
In workflow what is the object type to create service notification (IW51). How can I find it?
thanks in advance.
Regards

The object type for service notifications is BUS2080. You can find it via transaction SWO1 - use the search help on the Object/Interface field. You can also use the Business object repository (Browser) button on SWO1.

Attachments to Notifications - using "Services for Object"

Hi All,
I have sucessfully created a VC application (7.0 sp13) to create a General Notification in R/3
using the BAPI - IQS4_CREATE_NOTIFICATION
Our users in R/3 4.7 use the button in the Top Left Hand corner of the Screen "Services for Object"
to attach MS Word documents to Notifcations. Using the Create Attachment option from the Services for Object toolbar that pops up when the button is clicked.
Has anyone else tried this or have any advice on how this can be done in VC - if you can recommend a BAPI that I can try or will this be a custom ABAP BAPI.
Thanks in advance for any advice you can offer.
- Robert

FUNCTION z_pm_attachment_and_url.
*"*"Interface local:
*" IMPORTING
*"     VALUE(I_QMNUM) TYPE QMNUM OPTIONAL
*"     VALUE(I_AUFNR) TYPE AUFNR OPTIONAL
*"     VALUE(I_URL) TYPE SO_URL OPTIONAL
*"     VALUE(I_FILE) TYPE ZPMCT002 OPTIONAL
*"     VALUE(I_FILENAME) TYPE STRING OPTIONAL
*" TABLES
*"      T_RETURN STRUCTURE BAPIRET2
* Objetos locais
DATA:
    vl_url         TYPE so_url,
    vl_path        TYPE string,                             "#EC NEEDED
    vl_loopc       TYPE sy-loopc,
    vl_lines       TYPE sy-loopc,
    vl_filename    TYPE string,
    vl_filelength TYPE i,
    it_url         TYPE STANDARD TABLE OF sood-objdes,
    it_obj_cont    TYPE STANDARD TABLE OF solix,
    wa_obj         TYPE borident,
    wa_obj_cont    TYPE soli,
    wa_obj_data    TYPE sood1,
    wa_folder_id   TYPE soodk,
    wa_document_id TYPE sofmk.
DEFINE valida_retorno.
    loop at t_return into t_return.
      if t_return-type eq zgtpm_e.
        exit.
      endif.
    endloop.
    if t_return-type eq zgtpm_e.
      exit.
    endif.
END-OF-DEFINITION.
* === Valida parâmetros de entrada
IF i_qmnum IS INITIAL AND i_aufnr IS INITIAL.
*   Nenhum objeto informado: Informe Nota ou Ordem de Manutenção
    PERFORM mensagem_retorno_tab
    USING
      'ZPM_PORTAL' zgtpm_e '055' '' '' '' ''
    CHANGING
      t_return[].
    EXIT.
ELSEIF NOT i_qmnum IS INITIAL AND NOT i_aufnr IS INITIAL.
*   Informe apenas um objeto: Nota ou Ordem de Manutenção
    PERFORM mensagem_retorno_tab
    USING
      'ZPM_PORTAL' zgtpm_e '054' '' '' '' ''
    CHANGING
      t_return[].
    EXIT.
ENDIF.
IF i_url IS INITIAL
AND i_filename IS INITIAL.
*   Informe Anexo e/ou URL
    PERFORM mensagem_retorno_tab
    USING
      'ZPM_PORTAL' zgtpm_e '060' '' '' '' ''
    CHANGING
      t_return[].
    EXIT.
ENDIF.
* === Define Categoria de objeto
IF NOT i_qmnum IS INITIAL.
    wa_obj-objkey = i_qmnum.
    wa_obj-objtype = 'BUS2038'. " Nota PM
ENDIF.
IF NOT i_aufnr IS INITIAL.
    wa_obj-objkey = i_aufnr.
    wa_obj-objtype = 'BUS2007'. " Ordem de manutenção
ENDIF.
* === Anexo
IF NOT i_filename IS INITIAL.
*   Conteúdo do arquivo
    IF NOT i_file[] IS INITIAL.
      it_obj_cont[] = i_file[].
      DESCRIBE TABLE it_obj_cont LINES vl_lines.
      READ TABLE it_obj_cont INTO wa_obj_cont INDEX vl_lines.
      vl_filelength =
        ( 255 * ( vl_lines - 1 ) ) + STRLEN( wa_obj_cont ).
    ELSE.
      CALL FUNCTION 'GUI_UPLOAD'
           EXPORTING
                filename                = i_filename
                filetype                = 'BIN'
           IMPORTING
                filelength              = vl_filelength
           TABLES
                data_tab                = it_obj_cont
           EXCEPTIONS
                file_open_error         = 1
                file_read_error         = 2
                no_batch                = 3
                gui_refuse_filetransfer = 4
                invalid_type            = 5
                no_authority            = 6
                unknown_error           = 7
                bad_data_format         = 8
                header_not_allowed      = 9
                separator_not_allowed   = 10
                header_too_long         = 11
                unknown_dp_error        = 12
                access_denied           = 13
                dp_out_of_memory        = 14
                disk_full               = 15
                dp_timeout              = 16
                OTHERS                  = 17.
      IF sy-subrc <> 0.
        PERFORM mensagem_retorno_tab
        USING
         sy-msgid sy-msgty sy-msgno sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
        CHANGING
          t_return[].
        EXIT.
      ENDIF.
    ENDIF.
*   Pasta de Destino
    PERFORM get_folder CHANGING wa_folder_id t_return[].
    valida_retorno.
*   SAPoffice: definição do objeto, modificar atributos
    wa_obj_data-objla = sy-langu.      " Idioma
    wa_obj_data-objsns = 'O'.           " Objeto confidencial
    wa_obj_data-objlen = vl_filelength. " Tamanho conteúdo documento
    wa_obj_data-ownnam = sy-uname.      " Nome proprietário
    CALL METHOD cl_report_viewer=>split_path_filename
    EXPORTING
      i_filename = i_filename
    IMPORTING
      e_path     = vl_path
      e_filename = vl_filename.
    SPLIT vl_filename AT '.' INTO
      wa_obj_data-objdes    " Descrição breve do conteúdo
      wa_obj_data-file_ext. " Extensão de file de uma aplicação PC
    CONDENSE wa_obj_data-file_ext NO-GAPS.
*   Insere Objeto (Anexo)
    PERFORM object_insert
    USING
      'EXT' " Anexo
      wa_obj_data
      wa_folder_id
      it_obj_cont
    CHANGING
      wa_document_id
      t_return[].
    valida_retorno.
*   Relacionamento Objeto PM x Anexo
    PERFORM relation_create
    USING
      'ATTA'
      wa_obj
      wa_document_id
    CHANGING
      t_return[].
    valida_retorno.
ENDIF.
* === URL
IF NOT i_url IS INITIAL.
*   Inicializa estruturas comuns a Anexo e URL
    CLEAR:
      it_obj_cont,
      wa_obj_cont,
      wa_obj_data,
      wa_folder_id,
      wa_document_id.
*   Conteúdo da URL
    MOVE i_url TO vl_url.
    WHILE NOT vl_url IS INITIAL.
      CONCATENATE '&KEY&' vl_url(250) INTO wa_obj_cont.
      APPEND wa_obj_cont TO it_obj_cont.
      SHIFT vl_url LEFT BY 250 PLACES.
    ENDWHILE.
*   Pasta de Destino
    PERFORM get_folder CHANGING wa_folder_id t_return[].
    valida_retorno.
*   SAPoffice: definição do objeto, modificar atributos
    wa_obj_data-objla = sy-langu. " Idioma
    wa_obj_data-objsns = 'O'.      " Objeto confidencial
    wa_obj_data-ownnam = sy-uname. " Nome proprietário
    SPLIT i_url AT '/' INTO TABLE it_url.
    DESCRIBE TABLE it_url LINES vl_loopc.
    READ TABLE it_url INDEX vl_loopc
    INTO wa_obj_data-objdes. " Descrição breve do conteúdo
*   Insere Objeto (URL)
    PERFORM object_insert
    USING
      'URL' " Link Inter/Intranet
      wa_obj_data
      wa_folder_id
      it_obj_cont
    CHANGING
      wa_document_id
      t_return[].
    valida_retorno.
*   Relacionamento Objeto PM x URL
    PERFORM relation_create
    USING
      'URL'
      wa_obj
      wa_document_id
    CHANGING
      t_return[].
    valida_retorno.
ENDIF.
* === Libera objetos locais
FREE:
    vl_url,
    vl_path,
    vl_loopc,
    vl_lines,
    vl_filename,
    vl_filelength,
    it_url,
    it_obj_cont,
    wa_obj,
    wa_obj_cont,
    wa_obj_data,
    wa_folder_id,
    wa_document_id.
ENDFUNCTION.
***INCLUDE LZGPM0010F01 .
*&      Form mensagem_retorno_tab
FORM mensagem_retorno_tab
USING
    p_msgid TYPE symsgid
    p_msgty TYPE symsgty
    p_msgno TYPE symsgno
    p_msgv1 TYPE any
    p_msgv2 TYPE any
    p_msgv3 TYPE any
    p_msgv4 TYPE any
CHANGING
    t_return TYPE ty_return.
    DATA:
      vl_msgty TYPE symsgty,
      wa_return LIKE LINE OF t_return.
    IF p_msgty IS INITIAL.
      MOVE zgtpm_e TO vl_msgty.
    ELSE.
      MOVE p_msgty TO vl_msgty.
    ENDIF.
    IF p_msgno IS INITIAL.
      EXIT.
    ENDIF.
    MOVE p_msgid TO wa_return-id.
    MOVE vl_msgty TO wa_return-type.
    MOVE p_msgno TO wa_return-number.
    MOVE p_msgv1 TO wa_return-message_v1.
    MOVE p_msgv2 TO wa_return-message_v2.
    MOVE p_msgv3 TO wa_return-message_v3.
    MOVE p_msgv4 TO wa_return-message_v4.
    MESSAGE ID p_msgid TYPE vl_msgty NUMBER p_msgno
    WITH p_msgv1 p_msgv2 p_msgv3 p_msgv4
    INTO wa_return-message.
    APPEND wa_return TO t_return.
    FREE: vl_msgty, wa_return.
ENDFORM.                    " mensagem_retorno_tab
*&      Form get_folder
FORM get_folder
CHANGING
    w_folder_id TYPE soodk
    t_return TYPE ty_return.
    CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
         EXPORTING
              region    = 'B' " ?
         IMPORTING
              folder_id = w_folder_id
         EXCEPTIONS
              OTHERS    = 1.
    IF sy-subrc <> 0.
      PERFORM mensagem_retorno_tab
      USING
       sy-msgid sy-msgty sy-msgno sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
      CHANGING
        t_return[].
    ENDIF.
ENDFORM.                    " get_folder
*&      Form object_insert
FORM object_insert USING
    p_objtp     TYPE so_obj_tp
    w_obj_data TYPE sood1
    w_folder_id TYPE soodk
    t_obj_cont TYPE zpmct002
CHANGING
    w_document_id TYPE sofmk
    t_return      TYPE ty_return.
*   Objetos locais
    DATA:
      it_objcont TYPE STANDARD TABLE OF soli,
      it_obj_head TYPE STANDARD TABLE OF soli,
      wa_obj_id   TYPE soodk,
      wa_obj_cont LIKE LINE OF t_obj_cont.
*   RAW to CHAR
    LOOP AT t_obj_cont INTO wa_obj_cont.
      APPEND wa_obj_cont TO it_objcont.
      CLEAR wa_obj_cont.
    ENDLOOP.
*   Insere objeto
    CALL FUNCTION 'SO_OBJECT_INSERT'
         EXPORTING
              folder_id                  = w_folder_id
              object_type                = p_objtp
              object_hd_change           = w_obj_data
              owner                      = sy-uname
         IMPORTING
              object_id                  = wa_obj_id
         TABLES
              objhead                    = it_obj_head
              objcont                    = it_objcont
         EXCEPTIONS
              active_user_not_exist      = 1
              communication_failure      = 2
              component_not_available    = 3
              dl_name_exist              = 4
              folder_not_exist           = 5
              folder_no_authorization    = 6
              object_type_not_exist      = 7
              operation_no_authorization = 8
              owner_not_exist            = 9
              parameter_error            = 10
              substitute_not_active      = 11
              substitute_not_defined     = 12
              system_failure             = 13
              x_error                    = 14
              OTHERS                     = 15.
    IF sy-subrc = 0.
      w_document_id-foltp = w_folder_id-objtp.
      w_document_id-folyr = w_folder_id-objyr.
      w_document_id-folno = w_folder_id-objno.
      w_document_id-doctp = wa_obj_id-objtp.
      w_document_id-docyr = wa_obj_id-objyr.
      w_document_id-docno = wa_obj_id-objno.
    ELSE.
      PERFORM mensagem_retorno_tab
      USING
       sy-msgid sy-msgty sy-msgno sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
      CHANGING
        t_return[].
    ENDIF.
*   Libera objetos locais
    FREE:it_objcont, it_obj_head, wa_obj_id, wa_obj_cont.
ENDFORM.                    " object_insert
*&      Form relation_create
FORM relation_create
USING
    p_relationtype TYPE binreltyp
    w_obj          TYPE borident
    w_document_id TYPE sofmk
CHANGING
    t_return TYPE ty_return.
    DATA wa_doc TYPE borident.
    wa_doc-objtype = 'MESSAGE'.
    CASE p_relationtype.
      WHEN 'ATTA'.
        wa_doc-objkey = w_document_id(34).
      WHEN 'URL'.
        wa_doc-objkey = w_document_id.
      WHEN OTHERS.
    ENDCASE.
    CALL FUNCTION 'BINARY_RELATION_CREATE'
         EXPORTING
              obj_rolea      = w_obj
              obj_roleb      = wa_doc
              relationtype   = p_relationtype
         EXCEPTIONS
              no_model       = 1
              internal_error = 2
              unknown        = 3
              OTHERS         = 4.
    IF sy-subrc = 0.
      COMMIT WORK AND WAIT.
      CASE p_relationtype.
        WHEN 'ATTA'.
*         O anexo foi criado com êxito
          PERFORM mensagem_retorno_tab
          USING
            'SGOS_MSG' zgtpm_s '043' '' '' '' ''
          CHANGING
            t_return[].
        WHEN 'URL'.
*         A URL foi criada com êxito
          PERFORM mensagem_retorno_tab
          USING
            'ZPM_PORTAL' zgtpm_s '059' '' '' '' ''
          CHANGING
            t_return[].
        WHEN OTHERS.
      ENDCASE.
    ELSE.
      PERFORM mensagem_retorno_tab
      USING
       sy-msgid sy-msgty sy-msgno sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
      CHANGING
        t_return[].
    ENDIF.
    FREE wa_doc.
ENDFORM.                    " relation_create
Edited by: Fabrício Alves Vieira on Apr 8, 2008 3:08 PM

Forward PO as pdf attachment from Services for Object to external emails.

Hi, I am trying to forward PO to external email address from PO services for objects. I could not send as pdf document to external email address. SAP users are receving as SAP object in inbox. I can achieve this trough Message Determination for vendors. However my requirement is to forward to muliple external parties and internal users who do not have SAP access. Please advise any configuration or development need to be carried out to forward PO as pdf attachment. Advance thanks for your valuable inputs.

check answer given by Soumyaprakash in below thread:
http://forums.sdn.sap.com/thread.jspa?threadID=2111142 and
also have a look at below thread
http://forums.sdn.sap.com/thread.jspa?threadID=1324971
but i would like to know why you need to send PO to anybody but supplier?
yogesh
Edited by: Yogesh Lohiya on Feb 8, 2012 7:25 PM

Attaching a document to notification using service for object

hellow members,
i look for a table to let me know if a document
is attached to specific object (in my case it"s
a notification).
best regards,
avi
Edited by: avi koren on Jul 16, 2008 9:40 AM

Hellow Johannes,
thank you for your repling.
i don"t think that this is the direction.
In lots of objects in the SAP like a notification or a material,a button call "service for object" is available provide
some functions like
document attaching.
How i can see this attachments?
I think that the answer should be close to the table SOOD.
regards,
avi

Service Notification forwarded via Services for Object

Similar Messages

Maybe you are looking for