Service of machine along with few material purchase for machine

Dear All,
I am giving one machine for servicing, the service provider will do the service & will replace certain materails. For this whether i need to raise 2 seperate po's ?
If one po is enough, then where i need to mention 2 different taxes. ie, service tax & mat tax
pls advice
regds,
CB

Hi,
Yes.You have to maintain it as two different items in PO.
If you know the materials which he is going to replace,you can plan it in a PO.
Regards,
Deepak.

Similar Messages

  • Service entry sheet error.with new material group for services

    Dear Experts
    We need to create material group for  roll shop spare parts service,we created a new material group.
    when we are creating PR/PO with item category as D and a/c assignment K( entered cost center here).its giving error message
    as RC= 3M8 47 Account determination for entry JSL KBS J001 not possible(while making service entry sheet)
    after that i changed PR/PO and gave cost center and G/l account.now the service entry sheet is accepted.
    is it necessary give G/L account manually,if user chose wrong G/L account how to avoid this problem.
    please clarify me,
    do we need to assign valuation class for material group for services?(where to assign)
    or
    should assign G/L account manually to cost center while creating PR/PO
    Please clarify me
    Regards,
    Varun
    Edited by: madhu varun tirupati on Sep 8, 2010 2:48 PM

    Hi,
    Option-1:-- >
    Without creating material group and you can use your other service material group(existing service material group) and  create a service master  in AC03 as spareservice. Create a Service PO with text as roll shop spare parts service with other details as required like quantity of service, cost center & G/L account etc. After service being completed you can do SES in t.code: ML81N
    Option-2:-- >
    If you want report at the end based on different material/service group level, you can create a material/service group in OMSF for roll shop spare parts service and then you can assign to valuation class to material group in OMQW t.code. Then carry out regular process service order, SES etc.
    Based on requirement, you can enter G/L account manually or can set default G/L account in purchasing document with help of t.codes: OMSK, OMQW, OME9, OMGO & OBYC
    For error u201CAccount determination for entry JSL KBS J001 not possibleu201D, you cannot assign KBS transaction/event key to an account in OBYC t.code. Only you can assign G/L account to cost center with your CompanyCode in OKB9 t.code. Check the SAP note: 364570 & 106981
    Regards,
    Biju K

  • I had purchased Adobe Premiere Elements along with Adobe Photoshop Elements for my MacBook Air

    I had purchased Adobe Premiere Elements along with Adobe Photoshop Elements for my MacBook Air OSX Mavericks. Due lack of space I had to reiinstall OSX and could not retirieve from Seagate Back-up drive software in workable condition. Options please?

    yehudaleib
    All you should have to do is to go to the Adobe web site http://www.adobe.com.
    Sign in with your Adobe ID and Password.
    Then go the web page's Search field and type in "My Orders".
    Follow the "My Orders" link to your orders, find the order corresponding to the version in question.
    There should be an opportunity there to download a new set of installation files.
    Do you have your purchased serial number? If not, I am not sure if it will be included in the "My Orders"
    area. But, it should be in the "My Products" which you can access from the Search field. Click on the
    name of your product in "My Products", and the serial number should be revealed.
    Please let us know the outcome.
    Thank you.
    ATR

  • CFSTKE* Queues with few entries executing for long durations  (10 hrs)

    In APO 7.0 the CFSTKE* Queues with few entries executing for long durations  (10 hrs)
    Below are the FM from the queue 
    /SAPAPO/CIF_IRQ_REDUCT_INBOUND
    /SAPAPO/CIF_STOCK_INBOUND
    /SAPAPO/CIF_SL_DOC_INBOUND
    /SAPAPO/CIF_SL_DOC_INBOUND
    Do any one have the same problem and any fixes ?
    Thank You

    Hi Aravind,
    What is the status of your queue:
    Is it in status running, ready or sysfail?
    If it is in "Running" status since last 10 hours then check the following things:
    Check SM51 and see if you find a long running process, see if it is trying to do a sequential read on some table.
    If yes then ask your Basis team to run ST04 and see what index it is using,
    If that is also fine then ask them to check stat on that table.
    Builiding stat may help if a read on table is taking long time and index which is being picked up is correct.
    Your basis team should be able to help you.
    I hope it helps.
    Thanks,
    Anupam
    Edited by: Anupam Sengar on Aug 11, 2011 12:06 AM

  • Codes not visible along with description in Reason for Rejection-VA02

    Hi Friends
    I am facing an issue. I cannot see the Codes along with Description in Reasons for Rejection drop down in VA02 which are defined in SPRO.
    Please help me maintaining front end settings.
    Thanks...

    Hi,
    Click on Customize Local layout(Press Alt+F12)-->Options
    Goto Expert tab.
    Tick the checkbox under "Show keys in all Dropdown lists".If you want them in a sorted manner,click on the check box "Sort Items by key".
    click on Apply and OK.
    Regards,
    Krishna.

  • Notes in Mail: Every time I type a new note it is emailed to my Mail along with a new note for every change I make to it

    Notes in Mail: Every time I type a new note it is emailed to my Mail along with a new note for every change I make to it.
    I don't mind the Note being updated in my mail but I don't need a new copy every time I edit/add to the note.
    It's driving me mad!
    Thanks.

    A new tab opens by default as a blank tab (about:blank).
    If that isn't the case then an extension has changed that behavior.
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Report to see Item wise Material Purchases for a WBS

    Dear Sir,
    We need a Report to see the Material Purchase Value ( Material Code wise)  for a WBS .
    We tried using ME2J but it is not meeting our requirement as this Report shows the Material Purchase value for per unit qty only and that too only the Basic Value .
    Kindly help us pl .
    Rgds
    B Mittal

    DEAR Mr AP
    Thanks for reply .
    I tried with ME80FN. , but there is no option available to mention the WBS . Infact We need to generate the list for a specific WBS related Purchases .
    Rgds
    B Mittal

  • BAPI for Service PR creation along with sub services (with parameters)

    Hi Experts,
              I am trying to post PR for services throgh BAPI : BAPI_REQUISITION_CREATE but after passing the parameters in following structures :
    Values of these structures are reflecting in generated PR :
    REQUISITION_ITEMS
    REQUISITION_ACCOUNT_ASSIGNMENT
    REQUISITION_ITEM_TEXT
    But values are not reflecting for these below structures : ( sub services )
    REQUISITION_SERVICES
    REQUISITION_SRV_ACCASS_VALUES
    Please help in this regard.
    Thanks .

    Dear Keshu,
                  Thanks for the help first of all . This gave me some idea but still unable to post the service lines , I want to know whether it can work with internal number range of PRs because the document is for external number range , required some suggestion from your end ! Thanks

  • HT4009 Having Trouble with in-app purchases for Deepworld

    For some reason, my computer won't let me do an In-App Purchase in the game Deepworld. I have no idea what I'm doing wrong. Can anyone help me fix this?

    I'm having the exact same problem.  Unfortunately, I can't tell you what is causing it, but I can tell you what it isn't(at least in my case).  I made an in app purchase yesterday using a MasterCard I had linked to my account with no problems.  This morning, my card from my new bank came in so I switched it over(American Express), and all of a sudden can't make IAP.  I thought maybe there was an issue with the card, so I tried it out on a .99 app, and it worked no problem.  So I got with tech support and they had me reset all of my phone settings -_-, then my network settings.  No change.  I tried restarting the phone obviously, closing the App and trying again, no luck.  They suggested I call my bank and make sure the address I had on file for the card matched what I supplied for my Apple account, and that didn't fix it either.  I tried IAP on two different apps and it was the same, could not connect to App Store error.  I'm still trying to figure it out, and I'm sorry I can't be of more help, but I hope I at least save you some trouble of trying these things.  If I find anything out I'll let you know.

  • Charger given along with Box not compatible for No...

    I have recently bought X2-02 couple of days back and when I have decided to charge my phone, the charger just couldn't connect in.I am not sure why charger from the box could not fit into the charging point on the Nokia X2-02 phone.Can anyone ever faced this issue? can you guys suggest here..

    Very very rare issue,in fact ive never heard of it.
    Bring it back to point of purchase and get the proper one.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Material Stock along with open order qty

    Dear All,
    Is there any standard report where in i can get the stock of any material at a location along with the Open purchase order qty
    for multiple item
    in mmbe i can get only single item wise ...
    kindly guide.
    Shailesh Panchal

    Dear,
    There is no std report as per ur requirement, u need to develop a Z-report for ur requirement.
    Make use of table MARD for UR Stock, and
    open PO qty check table EKET (Scheduling Agreement Schedule Lines)
    Open Po Qty = field: MENGE(Scheduled Quantity)-field: WAMNG(Issued Quantity) and also check
    In EKPO table field ELIKZ is for Delivery completed
    PO's for which this flag is not ticked are considered as open PO to get Open order Qty u need to check fields
    MENGE Order quantity
    WEPOS Goods receipt
    Diff bet these two fields is Open Order Qty
    Regards,
    Gopala.S

  • Function module to get Service Order details created with a Sales Order

    Hi,
    Could anyone tell me if there is any function module to get the details of the Service order that is created automatically for a line item in a sales order. Let me explain my requirement clearly.
    When a sales order is created with specific line item, a service order is automatically created for that line item. I need to get the information about the associated service order. I can't find this information in VBAK, VBAP or VBEP tables obviously. But, i can see the link between the service order created and related Sales document # and item #  in the DB view  CAUFV. But, the key field here is Service order #. But my requirement is to get the service order details from the key field of Sales document.
    I tested the FM SD_SALES_DOCUMENT_READ_POS that reads the sales document header and item material tables, but this doesn't help me in getting the service order details associated with the material line item.
    Your early response is greatly appreciated.
    Thanks in advance,
    venu

    Hi Akshay,
    I actually saw this , but surprisingly, there is nothing stored in this field in either of the tables VBAK or VBAP. I mean, even for the sales orders which have associated service orders, nothing is stored in either of the above tables.
    Can you please tell me if there is anyother way.
    Thank you,
    venu

  • To Import XSD file along with WSDL file in ED

    Dear All,
    I am doing a scenario web service1 —XI—RFC—web service2. Web service1 sends request to XI and XI sends to RFC and RFC response to web service2 and web service2 response (acknowledge) back to XI and XI sends back to web service1.
    My client (web service2) has given me the web service (WSDL) file along with XSD file.
    In the wsdl file there are number of elements and complex types.
    <xs:element name="GetCustomer">
         <xs:complexType>
              <xs:sequence>
                   <xs:element name="authentication" type="xx:AuthInfo"/>
                   <xs:element name="CompanyName" type=" xx:AuthInfo "/>
              </xs:sequence>
         </xs:complexType>
    </xs:element>
    The type (xx:AuthInfo and xx:AuthInfo) are defined in XSD file.
    My questions are
    1)     Do I have to import the XSD file in ED or not.
    2)     How do I map this XSD
    3)     As WS1, RFC and WS2 all are synchronous MT do I have to use BPM for it.
    4)     Can some one help with any docs please..
    Thanks in advance

    Hi,
    >>Do I have to import the XSD file in ED or not
    If you are having the wSDL files then you can take the structure from there itself. Just import the wsdl files in IR. You can also use XSD.
    >>How do I map this XSD
    XSD are same as Message Types. So create a MM and choose your XSD.
    >>As WS1, RFC and WS2 all are synchronous MT do I have to use BPM for it.
    Yes you have to because you are taking the responce from RFC and going to give it to WS2.
    BPM steps:
    1) receive (open sync bridge)
    2) transformation 1
    3) send (snyc)
    4)transformation 2
    3) send (close sync bridge)
    https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
    Regards
    Suraj

  • How to get terminal address along with Change document header

    Dear All
    My client want a report of the frequencies of a sales document changes along with terminal address. In table CDHDR i can get user name, date, t-code but not the terminal address. So requesting to guide me of how to get the terminal address from which terminal the document has been updated.
    Appropriate answer will be rewarded.
    Regards
    Kingshuk
    Edited by: Kings_Roy on May 31, 2010 11:02 AM

    I don't think this information is kept in change documents.  So for the change documents that are already created, you cannot get this information.
    For future however you can do some code changes to get this information.
    Function module TH_USER_INFO can return terminal name as well as IP address for a given client and user.
    All you have to do is either store this additional information along with change documents. For this i think you can check the FMs that are writing SD change documents. 
    OR
    You can use user exit exit SUSR0001 (User exit after logon to SAP System) to call this Function (TH_USER_INFO) at user logon and store this info in a Z table. Later when you are reading change documents, you can get user name, date time from change document and search this Z table for respective user Terminal name and IP Address.
    This is not a complete solution but i hope it will direct you to a solution.
    cheers.

  • Getting a column in numbers '09 to not sort along with other columns

    How do I have a header column not sort along with the other columns. for example, if I have a spread sheet with all my contacts and there is a numbers header column on the left, how do I get the last name column to sort but not have the header column sort along with it?
    Patrick
    Ohio

    pmalone wrote:
    How do I have a header column not sort along with the other columns. for example, if I have a spread sheet with all my contacts and there is a numbers header column on the left, how do I get the last name column to sort but not have the header column sort along with it?
    Feature unavailable.
    We sort every columns or none of them.
    Yvan KOENIG (VALLAURIS, France) vendredi 18 septembre 2009 19:23:57

Maybe you are looking for