Service Order Front Office Process do not allow to go back

Dear All,
We are facing an scenario in which we need to cancel or go back in the creation of isu order process.
The problem is if you are in the creation of service order step and want to cancel or go back to CIC0, the system cancel the process but the service order HAS BEEN CREATED instead of this cancellation.
We have configured our FRONT OFFICE Process with the ISUSMORDER. CREATEBYORDERCODE BOR/METHOD.
We really thank any help in advance or best practices to map this scenario.
Regards.
Nicolas.

Dear Nicholas,
The method CreateByOrderCode is a "dark method", meaning no user interaction.
It creates a service order based on the order code functionality and customizing of IS-U.
What you are doing is to create an order with the method mentioned above and after that you edit the order with the Edit method. Therefore it is not possible for sure to cancel the order.
If you want to for example create the order in a way that the order creation dialog is executed so that in case of an exit without saving the order is not saved. This is a different approach. This is not related to the CreateByOrderCode method because it simple does what is should do: Create service order based on order code in the background.
I suggest to check other methods like BUS2007.Create which are simply doing a call transaction but you have to keep in mind that you are loosing the benefits of all the IS-U order code customizing in this case.
I hope this information is helpful for you.
Kind Regards
Olivia

Similar Messages

Stopping the service order from further processing

Hi Experts,
According to my requirement, the service orders will be generated by the call centre agents , then they will release and the technicians will be determined . The pager messages will go to the technicians.
But the service order whic are generated after 5 PM , we should not send the messages to the technicians althought the service orders are released.
For this where should I do the coding , which is the exact place to stop the service order from further processing.
Please help me out in this.
Thanks in Advance,
Praveen

Hi,
The best way would be to implement a ORDER_SAVE Badi..wherein u can stop a service order for further processing based on the status..
Regards,
PePe

Purchased ipad already got apple id through itunes and iphone but it is not an email address ipad setup process will not allow me to use current id or change id to primary email address - do i have to have different id for ipad

Purchased an ipad but already got apple id through itunes and iphone but is not an email address, ipad setup process will not allow me to use current id or change id to primary email address - do I have to have different id for ipad

It does have to be a verifiable email address though, you can change it here:
Apple ID support
http://www.apple.com/support/appleid/

Front Office Processes

Does anyone use transaction EWBC - Define Front Office Processes and know where I can find useful documentation on this transaction?

resolved

Photoshop Elements 10 will not allow me to back up the entire catalog.

Photoshop 10 will not allow me to back up the entire catalog. During its initial set up, when it runs the space needed, it stops at 18% and will not go beyond that
Here is what I am doing. In Elments Orgainizer, I am going to FILE, then selecting Back Up Catalgo to CD,DVD or Hard Drive, then I select- Full Back Up, then it goes to Calculate Total Media Space and that is where is stops at 18%

Thanks for the response
My OS is Win 7 Home Prem
The catalog is over 60GB and over 31,000 images
There are only a few videos in the catalog
I am backing up to a hard drive that is a 2TB drive
I can not even get to select the drive, as the system stops as it calculates the amount of space needed.

Mail seems to create Mail folders that are not allowed to be backed up.

The folder in my Home>Library>Mail that had my Inbox in it was titled POP/[email protected]@myserver.net, or the specific equivalent.
When I was backing up everything to an exterior hard drive, I got a message saying the name was too long, or had incorrect characters in it.
I boldly shortened the name by taking the second @myserver.net off, keeping my fingers crossed, and all seemed to go well, until the next time I opened Mail, and most of my Inbox was gone. And all of the emails I had deleted in the last month or so were back in my Inbox.
It turns out that on launching Mail, my computer had created a new POP/[email protected]@myserver.net folder, but had only transferred a small chunk of my old emails to fill it.
So I went back and looked at the POP folder whose name I'd changed, and all the old emails were there. So I copied each item in the non-allowed folder to the Mail folder in the exterior hard drive, created a new folder there with the shortened title POP/[email protected], stuck all the items in it, just for tidiness. I was able to access these mailboxes from my Mail program.
So now I had backed them up, which was a weight off my mind. But I believe I lost emails like this previously when backing up, and didn't figure out how to find and save them, and now they are probably gone forever.
What I want to know is why Mail creates folders with titles that it will not allow itself to back up.
iBook Mac OS X (10.3.9)

Hello, and welcome to the Discussions.
I think something else must have happened, for I have
never had this happen. I have just tested copying my
POP folder with the longest name, and no problem.
The name had the same number of characters, and
format as the following:
[email protected]@mail.xxxxxx.net
However, I note that the form you report (that of
beginning with POP/) is not the current form Mail has
used for some time, but rather would be expected to
begin as "POP-". Nevertheless, I would not have
expected that, alone, to cause the behavior you
report.
More info, please.
Ernie
Hi Ernie,
Maybe it was something to do with the permissions. Last time I tried to verify my permissions, I was unable to. I got a message saying my disc could not connect with Disc Utility, or was disfunctional in some precarious way. A somewhat scary experience that I am not in a big hurry to repeat.
Based partly on your info, I have decided instead to upgrade to Tiger immediately, and am hoping this will alleviate some or all aspects of these problems.
Thanks for your input,
Stephen

TM will not allow me to back up

Hello
TM will not allow me to back up. I keep getting this error message coming up "The backup volume could not be found"
I have followed the advice given on the support pages. i.e.
1. From the Apple menu, choose System Preferences.
2. From the Viewmenu, choose Time Machine, or click Time Machine in the Dock.
3. Click "Choose Backup Disk...".
4. Select your backup location again.
This has made no difference!
I have tried two portable HDD (Western Digital 120GB & 150GB). TM will not work on either.
I have followed the advice on changing the partition type and erasing the disk, to start a fresh, again following the advice on the support pages: i.e.
1. Open Disk Utility.
2. Click the Partitions tab.
3. From the Volume Scheme pop-up menu, choose the desired number of partitions.
4. Click the Options button.
5. Select a new partition scheme:
Use "GUID" partition scheme if the disk will be used with Time Machine and a Intel-based Mac.
6. Click OK.
7. Click Apply.
However I still get the error message, "The backup volume could not be found", when I try to back up.
Help, any ideas.
Thanks

Dhamma,
Try this,
Go to System Preferences --> Time Machine.
Click "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your drive again.
Close System Preferences and try backing-up again.
If this does not work, then the following KB article may apply in your case: (http://support.apple.com/kb/HT1170)
“When using your Time Capsule for Time Machine backups in Mac OS X 10.5 Leopard or later, the Time Capsule backup volume may not mount and Time Machine may not be able to back up to it. This alert may appear:
"Backup volume cannot be found"
This can happen if the Time Capsule disk has a long name.
Rename the backup volume via AirPort Utility:
Open AirPort Utility (in /Applications/Utilities).
Click your Time Capsule's icon.
Click "Manual Setup".
Enter the password for the Time Capsule if prompted.
Click the Disks icon.
Highlight the volume name that appears under "Time Capsule Disk".
In the Name field, enter a name for the volume that is less than 27 characters long.
Click Update.
After Time Capsule restarts, on the Mac(s)using Time Machine, open Time Machine preferences and reselect the Time Capsule volume.”
Let us know if either of these suggestions help.

Preventing the service order from further processing ????

Hi Experts,
According to my reks, I need to stop the service order processing based on the timings after releasing the service order, for this do I need to use the status badi and what is the procedure to follow.
Please help me out in this.
Thanks in Advance,
Praveen

Hi Praveen,
Using status BADI set the status to 'Distribution Lock', so it will not trigger any changes to ECC.
//Bhanu

Service order on CRM application is not working fine

1. We have recently moved from 8.48.16 to 8.51.15 on CRM 8.8 .
2. One of the deleivered feature on CRMUPG is not working. Navigation is as given below.
a) http://mstn-v-iscdev2/psp/CRMUPG/?cmd=login
b) click on " service order " on left hand side.
c) Enter service order id (2000136) in Service Order id.
d) click on " Insert IOP Facilities " in requested facilities section.
e) After clicking CSOS link in facilities column on IOP Facility pane.
The CSOS data is not reflecting in requested Facilities section.
Plz check the issue and help the earliest.
Details :- IE 8
In Another environment,when i click on CSOS.
I can see javascript:submitAction_win0(document.win0,'MSI_FACILITYNAM$0'); in below panel.
while in the environment where i am facing issue show
javascript:hAction_win0(document.win0,'MSI_FACILITYNAM$0', 0, 0, 'CSOS', false, true);

Hi,
How have you defined the property "WAS host" for the portal system that you have created for the back-end?
You might get this error if the way you have defined this WAS host property and the way you are calling the portal are different. For example, if your WAS host property is "<hostname>:<portnumber>" and you are calling your portal as "localhost:<portnumber>", then you will get this error.
Also are you connecting to your portal using the fully qualified domain name? Don't call the portal simply as
<i>http://<host>:<port>/irj</i> but call it as http://<host>.<domain>:<port>/irj.
Regards,
Satyajit.

CRM service order - Follow on processing in ECC

Dear Experts,
We create a service order in CRM. It contains service items as well as spares in it. If I configure the same order type and item category in ECC, would this replicate as it does not at the moment.
What needs to be done to make it reflect in ECC transaction VA03?
Thanks
Ritwik

Thanks

Hai all sales order discription and quantity should not allow modification

Hi all
any one plz respond me, my requirement is once the sales order approved then its not allow any modification like order quantity, discreption and first delivery date in the change mode va02 and va22 plz help me .
regards,
venkat.

You can use user exit   MV45AFZZ and here
FORM USEREXIT_FIELD_MODIFICATION.
CASE SCREEN-GROUP3.
WHEN '900'.
    IF VBAK-VBTYP NE 'A'.
      SCREEN-ACTIVE = 0.
    ENDIF.
ENDCASE.
CASE SCREEN-NAME.
WHEN 'VBAK-VBELN'.
    SCREEN-ACTIVE = 0.
ENDCASE.
ENDFORM.
Write your code between Form and endform.
try to mention sy-tcode is VA02.
then it won't distrb others.
Reward Points if it is helpful
Thanks
Seshu

Save service order - billing due list is not generated

Hey,
when i save service order ,the billing due list is not generating.what have to do.
Thanks

Hi Swati,
Every document will have two types of statuses
1. Header level
2. Item level
Whenever the item is set to Released (Not the Header status) then the billing items get triggered and you will see them in the billing dues list.
and one more prerequisite is you will have to set your item category as Relevant to billing and also have to do the config around that item category
Please let me know if you need more info and award me points if this helps

Office documents not allowed to save back to SharePoint when using the "Save As.." Sharepoint hangs trying to contact the site.

I have a user who is a Sharepoint site owner (of the site in question) who just received a new machine, but every time she opens a document from our SharePoint site and then tries the "Save As.." option it hangs trying to contact the sharepoint
site. The specific message is "Contacting: (insert sharepoint site). Press ESC to cancel."
Sometimes when you choose ESC it allows you to save do what Save As should have done, but other times it will hang at Not Responding and freeze the application. I have tried repairing Office reloading IE and even gave the user a new profile, but nothing
has fixed it.
She can do this without any issue on other machines and I have found that even when I log on with my administrative privelidges I have the same issue. I have one co-worker who was able to get things to function normally however which makes this even
more frustrating.
Any suggestions would be welcome.

Hi,
Please take a look at this thread, and see if the steps in it also work for you:
http://answers.microsoft.com/en-us/office/forum/office_2010-word/contacting-server-press-esc-to-cancel/8384c481-bc9f-44b9-bd38-9dd1c7cb9876
In the Templates and Add-Ins dialog box, see which template is attached to the affected document(s)
Disable the component of Microsoft Sharepoint Foundation Support via Add/Remove features in Control Panel.
Hope this helps.
Thanks,
Ethan Hua CHN
TechNet Community Support

Ios Office mobile does not allow SharePoint "Add a Place"

I don't have an Office365 account/subscription. Using my Microsoft account...
On Android I can go to "Add a Place" and reference our on-premise SharePoint service - works great.
On iOS when I try to do the same thing it tells me this account can't be used and to use an "Organization Account".
Any ideas?
Thanks!!
Casey

Hi,
For a summary, I find that there are some difference between Office Mobile for iPhone and Android.
Microsoft Office Mobile for Android:Use a Microsoft account,some features of Office Mobile ,such as enable the Office Roaming Service, sharepoint,and so on.
Office Mobile for iPhone:you can use either a Microsoft Account associated with your Office 365 subscription or your Organization Account if you are using Office 365 at work.So I think this the reason why ios tell you to use an "Organization Account".
Here are articles about Office Mobile for Android and iphone.
http://blogs.office.com/2013/06/14/office-mobile-for-iphone/
http://office.microsoft.com/en-us/mobile/microsoft-office-mobile-for-android-privacy-statement-HA104062674.aspx?CTT=1
Paul Shui
Microsoft Online Community Support
Please remember to click “Mark as Answer?on the post that helps you, and to click “Unmark as Answer?if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Internal Order with status as Released not allowing postings

Hi Experts,
We are trying to interface expense reports against Internal orders wherein the IO is in REL GMPS status but is rejecting the ERs.
Can we have the possible reasons for the same?

Hi..
You define user status management as below.(IMG Menu path : Internal order>Order master Data>Status Management)
-. If you select Status number “10”, SAP don’t allow FI posting.
-. If you select Status number “20”, SAP allow FI posting.
After you assing above user status to order type, you create internal order and you can control FI posting as below.

Service Order Front Office Process do not allow to go back

Similar Messages

Maybe you are looking for