Service PO version management

For service PO, new version is getting created when i change the item text or quantity and not header text.
The config is exactly the same as per other doc types....
What could be missing? Is it controlled by item category also?
Regards,
Shail

HI
PO Version Mgnt is at Doc Type level.
In SPRO U need to tell system for wat are the changes the version shold create.
Vijay

Similar Messages

SAP Fiori: Version Management for SAP Gateway Enhanced Services & SAP UI5 Application

Hello Experts,
Greetings!!
I would like to check how version control is achieved for SAP Fiori app extensions. Or while enhancing the SAP UI5 applciation or enhancing a SAP netweaver gateway backend service for Fiori App.
I would appreciate your inputs. Thanks in Advance.
Sudhanshu ~
Tags edited by: Michael Appleby

For front end SAPUI5 CODE in Elipse or RIVER RDE you can use GIT which is pretty standard way of doing code management. Once you push the code to GW it is in BSP and then you dont have much control on the version management side. If there are multiple developers working on front end code then you can push to GW using ABAP Team Provider plugin in Eclipse that pushes the sapui5 code to BSP via workbench request and once 1 developer is done then he/she will submit the code. the next person then does the GET from GW into their Eclipse to get the latest version of source code. But if there are 10 changes to the sapui5 code then on front end side you should use GIT or BitBucket or MS Team Share kind of source code control tools that integrate with ECLIPSE.
For oData Service you can do version management in ABAP stacks. you can have multiple versions for your service and then deploy to prod the one that you are sure of. Std change management can be used for backend GW service development.
thanks
Ashish

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Version management for SAP Screens?

Hi,
I need to do version comparison for sap screens .
My source system is R/3 4.7 & Target system is ECC 6.0.

For front end SAPUI5 CODE in Elipse or RIVER RDE you can use GIT which is pretty standard way of doing code management. Once you push the code to GW it is in BSP and then you dont have much control on the version management side. If there are multiple developers working on front end code then you can push to GW using ABAP Team Provider plugin in Eclipse that pushes the sapui5 code to BSP via workbench request and once 1 developer is done then he/she will submit the code. the next person then does the GET from GW into their Eclipse to get the latest version of source code. But if there are 10 changes to the sapui5 code then on front end side you should use GIT or BitBucket or MS Team Share kind of source code control tools that integrate with ECLIPSE.
For oData Service you can do version management in ABAP stacks. you can have multiple versions for your service and then deploy to prod the one that you are sure of. Std change management can be used for backend GW service development.
thanks
Ashish

Unable to connect to the Data Access service for this management server

Hate to raise a sleeping horse but was hoping someone might have some insight into why SCOM Report Server install is failing. I am using a domain account for SCOM 2012 R2 services in a distributive environment
with 2 management servers and 2 SQL servers…one for Ops db and one for DW db.
Install was failing on selecting the management server. Research led me to
Kevin Holman's site. I followed his doc and SPN are set per your config and can telnet to MGMT1 on 5723…firewall is off on all servers. I am a domain admin and scom.mgmt account (MSOMSdkSvc) is a local admin on the MGMT servers.
>setspn -l domain\scom.mgmt
Registered ServicePrincipalNames for CN=scom.mgmt,OU=Service Accounts,DC= domain,DC=net:
MSOMSdkSvc/SCOM-MGMT1
MSOMSdkSvc/SCOM-MGMT1.domain.net
MSOMSdkSvc/SCOM-MGMT2
MSOMSdkSvc/SCOM-MGMT2.domain.net
>setspn -l domain\scom-mgmt1
Registered ServicePrincipalNames for CN=SCOM-MGMT1,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/SCOM-MGMT1.domain.net
TERMSRV/SCOM-MGMT1.domain.net
WSMAN/SCOM-MGMT1.domain.net
RestrictedKrbHost/SCOM-MGMT1.domain.net
HOST/SCOM-MGMT1.domain.net
MSOMHSvc/SCOM-MGMT1
TERMSRV/SCOM-MGMT1
WSMAN/SCOM-MGMT1
RestrictedKrbHost/SCOM-MGMT1
HOST/SCOM-MGMT1
>setspn -l domain\scom-mgmt2
Registered ServicePrincipalNames for CN=SCOM-MGMT2,OU=SCOM,OU=INTERNAL,DC=domain,DC=net:
MSOMHSvc/ SCOM-MGMT2.domain.net
MSOMHSvc/ SCOM-MGMT2
WSMAN/SCOM-MGMT2.domain.net
WSMAN/SCOM-MGMT2
 TERMSRV/SCOM-MGMT2.domain.net
TERMSRV/SCOM-MGMT2
RestrictedKrbHost/SCOM-MGMT2
HOST/CHH-SCOM-MGMT2
RestrictedKrbHost/CHH-SCOM-MGMT2.osi-asp.net
HOST/CHH-SCOM-MGMT2.osi-asp.net
>setspn -l domain\scom-ssrs
Registered ServicePrincipalNames for CN=SCOM-SSRS,OU=SCOM SQL,OU=SCOM,OU=CHH-INTERNAL,DC=domain,DC=net:
 WSMAN/SCOM-SSRS
WSMAN/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net
MSSQLSvc/SCOM-SSRS.domain.net:1433
 TERMSRV/SCOM-SSRS.domain.net
TERMSRV/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS
 HOST/SCOM-SSRS
RestrictedKrbHost/SCOM-SSRS.domain.net
HOST/SCOM-SSRS.domain.net
When I point to the MGMT server, I keep getting “Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are
all the same version”.
OpsMgrSetupWizard.log states…
Info:
:Could not connect to Management Server: scom-mgmt1.domain.net with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long.
Info:
:StackTrace: at System.Version.TryParseVersion(String version, VersionResult& result) at System.Version..ctor(String version) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.IsManagementServerCurrentVersion(String
managementServer) at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.CanConnectToManagementGroup(String managementServer)
When I searched on "Exception.Message: Version string portion was too short or too long" it led me to .Net strings in the reg. i deleted all refs to older versions (3.x) but still no good.
Bob

Well, I’m back to trying to get SCOM Report Server up and running. This time I decided to try the command line silent install and rely on logs to debug. But it still fails.
This is the script: SETUP /install /InstallPath:D:\Program Files\Microsoft System Center 2012 R2\Operations Manager /components:OMReporting /ManagementServer:<server>.<domain> /SRSInstance:<instance> /DataReaderUser:<domain>\<account>
/DataReaderPassword:******** /SendODRReports:0 /UseMicrosoftUpdate:0 /AcceptEndUserLicenseAgreement:1
When I run the script, I get a pop-up: “System CenterOperations Manager Setup has stopped working with the following:
Problem signature:
Problem Event Name:
CLR20r3
Problem Signature 01:
setupchainerui.exe
Problem Signature 02:
7.0.5000.0
Problem Signature 03:
522a5b85
Problem Signature 04:
mscorlib
Problem Signature 05:
4.0.0.0
Problem Signature 06:
53b4fc1e
Problem Signature 07:
e4d
Problem Signature 08:
5a
Problem Signature 09:
System.FormatException
OS Version:
6.1.7601.2.1.0.274.10
Locale ID:
1033
Additional Information 1:
4911
Additional Information 2:
49111a576c61a461b7f2900e4224563c
Additional Information 3:
a1e6
Additional Information 4:
a1e62e9c159c1d7601a31ccff83dbf94
App Event Log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name=".NET Runtime" />
<EventID Qualifiers="0">1026</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:39.000000000Z" />
<EventRecordID>4999</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>Application: SetupChainerUI.exe Framework Version: v4.0.30319 Description: The process was terminated due to an unhandled exception.
Exception Info: System.FormatException Stack: at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:02:41.000000000Z" />
<EventRecordID>5000</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data>SetupChainerUI.exe</Data>
<Data>7.1.10226.0</Data>
<Data>522a5b85</Data>
<Data>KERNELBASE.dll</Data>
<Data>6.1.7601.18409</Data>
<Data>5315a05a</Data>
<Data>e0434352</Data>
<Data>000000000000940d</Data>
<Data>a64</Data>
<Data>01d03bf626a03a7a</Data>
<Data>C:\Users\USER NAME\AppData\Local\SCOM\Setup\SetupChainerUI.exe</Data>
<Data>C:\Windows\system32\KERNELBASE.dll</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
</EventData>
</Event>
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Windows Error Reporting" />
<EventID Qualifiers="0">1001</EventID>
<Level>4</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-29T19:03:27.000000000Z" />
<EventRecordID>5001</EventRecordID>
<Channel>Application</Channel>
<Computer>SERVER NAME</Computer>
<Security />
</System>
- <EventData>
<Data />
<Data>0</Data>
<Data>CLR20r3</Data>
<Data>Not available</Data>
<Data>0</Data>
<Data>setupchainerui.exe</Data>
<Data>7.0.5000.0</Data>
<Data>522a5b85</Data>
<Data>mscorlib</Data>
<Data>4.0.0.0</Data>
<Data>53b4fc1e</Data>
<Data>e4d</Data>
<Data>5a</Data>
<Data>System.FormatException</Data>
<Data />
<Data />
<Data>C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_setupchainerui.e_9724aaa8eec4ffba07c27fea369e612e949d75_5b269652</Data>
<Data />
<Data>0</Data>
<Data>65be21be-a7e9-11e4-a4d7-005056966e1b</Data>
<Data>0</Data>
</EventData>
</Event>
OpsMgrSetupWizard.log
[13:48:16]:
Error: :Uncaught Exception: Threw Exception.Type: System.FormatException, Exception Error Code: 0x80131537, Exception.Message: Input string was not in a correct format.
[13:48:16]:
Error: :StackTrace:
at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
 at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
 at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
 at Microsoft.SystemCenter.Essentials.SetupFramework.PropertyBagDictionary.GetProperty[T](String property)
 at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ValidateBureaucraticSwitches()
 at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.ValidateSilentInstallCommandLineOptions()
 at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.RationalizeCommandLineArguments.Rationalize()
 at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.RationalizeGeneralInstall()
 at Microsoft.SystemCenter.Essentials.SetupFramework.Program.RationalizeInstall()
 at Microsoft.SystemCenter.Essentials.SetupFramework.Program.Main()
Any ideas? I feel like I’m just going in circles…Bob

Linux Integration Services (LIS) version 4.0 available!

We are pleased to announce the release of Linux Integration Services (LIS) version 4.0. As part of this release we have expanded the access to Hyper-V features and performance to the latest Red Hat Enterprise
Linux, CentOS, and Oracle Linux version.
Full Announcement on the Virtualization Blog here:
http://blogs.technet.com/b/virtualization/archive/2015/05/01/linux-integration-services-4-0-announcement.aspx
Download from Microsoft Downloads Center here:
http://www.microsoft.com/en-us/download/details.aspx?id=46842
We look forward to hearing about your experiences with LIS.
Michael Kelley, Lead Program Manager, Open Source Technology Center

Ubuntu may have moved those three button as well to that control bar.

Version management in Essbase

Hi all - We're looking to do version management with our Essbase objects (outlines, calc scripts, etc) as part of an ITIL implementation. Has anyone had any luck or experience in such an attempt with Essbase in a UNIX environment? The corporate standard will most likely be PVCS (now owned by Serena). Many thanks, charlie 

FYI, we were able to get EAL up and running after adding the following entries into the registry on our servers...
Solution
This timeout issue can be fixed by adding two tcpip registry parameters, but first you must identify which client was communicating with essbase when the timeout occurred so that you know which machine to add the parameters to. If all the EAL and EPM components are installed on a single machine, then that machine would also host the client. If products are installed in a distributed environment you determine the client machine based on how the EAL Essbase Server component is defined.
The APS URL is part of the Analytics Link, Essbase Server definition in EAL.
If the value (APS URL) is "Embedded" this means that the EAL Application Server is communicating via the JAPI directly with the Essbase Server. In this case the EAL AppServer is the client to the Essbase Server. For this case the following tcpip registry parameters need to go on the machine where the EAL Application Server is running.
If the (APS URL) value is http://serverName:13080/aps/JAPI then the EAL Application Server is communicating by way of Hyperion Provider Services (APS). In this case EAL proxies requests to and from the Essbase Server through APS. This means that APS is the client to the Essbase Server and the tcpip registry parameters need to go on the machine where Hyperion Provider Services are running.
Once you have identified which machine is acting as the client to essbase, set the TcpTimedWaitDelay=30 and MaxUserPort=65534 parameters via the windows registry.
1. Open the Windows Registry.
2. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.
3. Add new DWORD Value named "TcpTimedWaitDelay"
- right click and select Modify
- Select "decimal" radio button, type in 30.
4. Add new DWORD Value named MaxUserPort
- right click and select Modify
- Select "decimal" radio button, type in 65534
5. A reboot of the server is necessary.

CRM Quotation version management

Hi Experts,
We have got a requirement for 'Quotation version management' in our current project.
But for my surprise i couldn't find any information about this in SCN, Service market place.
Can someone pls share some knowledge about this, am using CRM 7.0.
Do we have this feature in 7.0 ?
if yes how to configure and use it ?
Regards

Hi Bhargavi,
This functionality is not available in CRM 7.0 EHP 1. You need to do the enhancement to achieve this -
Revision of quote where you need to maintain the versioning of a Quote requires an enhancement. Following logic can be applied -
1. If multiple revisions are required then you should set one quote as a primary quote. Else, the user will not be knowing which one is the quote on which he/she suppose to work or send it to the customer.
2. Also, I hope you want to link these revised quotes to your opportunity, you need to link it in the Transaction History tab which requires WEB UI enhancement. (I assume that all these revision quotes may be linked with one single opportunity)
3. Create new button say ‘Revision Quote’ based on "Copy" Button functionality.
4. BADI - CRM_COPY_BADI can be used to enhance the functionality
5. When you create a revised quote whichever is the latest revised quote can be set as a primary quote.
You may need to write around this logic to achieve the requirement and based on the logic a technical enhancement is needed.
Hope this will be useful
Thanks and Regards
DJ

ASR (Auto Service Request) version 3.1 now available

ASR (Auto Service Request) version 3.1 has been released to production.
You can access the ASR 3.1 download and documentation via the link at the bottom of http://oracle.com/asr.
Changes in ASR 3.1:
ASR Manager installable on any Solaris 10 or OEL (Oracle Enterprise Linux) operating environment
Supports the ability to install the ASR Manager on a non-qualified, non-entitled server. This means the ASR Manager can be installed in a Solaris local zone or LDOM, in virtual environments such as VirtualBox and VMWare, and on M-Series domains and Blade servers.
Changes in the customer email notifications.
The updated user documentation includes examples of the new email messages.
Our customers and Partners are advised to use My Oracle Support to manage their ASR assets, as well as the ASR Manager "list_asset" command.
The "asr report" command is now disabled.
See the "What's new" section of Installation and Operations guide for more info on ASR 3.1 changes.
Note that the ASR download is now hosted by My Oracle Support and is no longer on the Sun Download Center.
Best Regards,
Wayne Seltzer
ASR Product Manager
Oracle Global Customer Services

Hi
I have wls 10.3.1 installed on my local machine. I installed it as part of configuring FMW 11g. I am trying to add
OSB component to it by running : osb1031_wls103_win32.exe.
But I am receiving the following error message:
The product maintenance level of the current installer ( wls 10.3.0.0) is not compatible with the maintenace
level of the product installed on your system (wls 10.3.1.0). Please obtain a compatibile installer or perform
maintenance on your current system to achieve the desired level.
So my guess from the above message is that "osb1031_wls103_win32.exe" is for wls 10.3 and not for wls 10.3.1.
Where can I get the OSB installer for wls 10.3.1? or how can I fix the above error?

NWDI advantages over other Version Management tools

Hi all,
We have our own customized applications in our landscape.We are not using NWDI.We use an external Version Management tool. I would like to stress out what are the advantages of using NWDI rather than the existing version management tool.I have been questioned many times as to what is the need of NWDI if we are not using Standard SAP packages.
I request all of the members to highlight some major advantages of using NWDI interms of customized applications and thinking about the future
Thanks,
Sridar

Hi,
In Version management tools we can only maintain the versions i.e, backup of our developments. but in NWDI there are four different components for different reasons
1)DTR(Design Time Repository): This is used for version controlling.
2)CMS(Change Management System):Used to transport your source code from different landscape systems.
4)CBS(Central Build Service):Used to Build all the source code which we deployed.
5)SLD(System Landscape Directory):Used to store all the standard business packages required.
hope you understand the difference....for more details plzz check in sdn.
Regards,
Anil.

Unable to create tickt in service desk - Solution manage.

Hello,
I have implemented service desk ( Solution manager) and It is working fine for most of the system but i am getting error while creating a ticket in service desk for one system.
Due to some RFC connection problem i have regenerated the RFC ( trusted , Read and TMW) from Solman to Satellite system.
and now I am not bale to create ticket for that system.
Error message :
The URL http://cismp.cargotec.com:8014/sap/bc/bsp/sap/dswpnotifcreate/msg_new.do was not called due to an error.
Note
The following error text was processed in the system SMP : Error SYSTEM_CORE_DUMPED occured. P1=11
The error occurred on the application server cismp_SMP_14 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: DO_HANDLE_EVENT of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DISPATCH_INPUT of program CL_BSP_CONTROLLER2============CP
Method: DO_REQUEST of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
Can any body guide me what should be done to resolve the issue.

Hi Prakhar,
As i mentioned workcenter is working fine for all other systems. and user have all roles same as in other systems.
BP is created and we are trying to create ticket from Solman itself so there is no point to maintain bCOS_CUST table.
but still we are not able to create ticket only for one system.
Error Message :
Error when processing your request
What has happened?
The URL http://cismp.cargotec.com:8014/sap/bc/bsp/sap/dswpnotifcreate/msg_new.do was not called due to an error.
Note
The following error text was processed in the system SMP : Error SYSTEM_CORE_DUMPED occured. P1=11
The error occurred on the application server cismp_SMP_14 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: MSG_SUBMIT of program CL_DSMOP_BSP_NOTI_MODEL=======CP
Method: DO_HANDLE_EVENT of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DISPATCH_INPUT of program CL_BSP_CONTROLLER2============CP
Method: DO_REQUEST of program CL_DSMOP_BSP_NOTI_CTRL========CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SMP in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server cismp_SMP_14 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server cismp_SMP_14 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 011 -u: XABHYABH -l: E -s: SMP -i: cismp_SMP_14 -w: 1 -d: 20091006 -t: 141511 -v: RABAX_STATE -e: SYSTEM_CORE_DUMPED
Regards,
Bhavesh

Version management issue

I am two issues with Version Management in PR and POs:
- New version can only be added onces the PR or PO is release by final authority. Below is the scenario:
I have created a PR and have it release by the two approving authorities. Now I want make changes in the PR. I have it cancelled from the both approving authorities and make the required changes. Now logically the system should allow the initiator to add the new version so that requisition so that the approving authrities must know that the second version of requisition is being released. But the system doez not let the initiator add the version prior to release. Do we have any solution to this?
- second issue is that once the second version is added in the PR and we need to make some more changes and create a thrid version, system doznot let user to revoke the release.

Dear ABC,
For your issue 1, please check if version already set to completed and an message output already sent to vendor.
This is the prerequisites for the new version to be created. A new version will only be created when the information
had sent to vendor.
Regards,
ian, Wong Loke Foong

Issue in PO Version Management

We have recently configured release strategy for PO in SAP.
Now there is issue with Version management.
Consider X and Y are users responsible for Purchasing activities.
Scenario prior to Release Strategy Configuration:
If X has created PO and if it is transferred to Y for some changes, Y used to manually genrate version(Using + button on Version Tab in PO) and used to make changes in PO. i.e. X and Y both were able to genrate version.
Scenario after Release Strategy Configuration:
If X has created PO and if it is transferred to Y for some changes, Y is not able to genrate version as + button on version tab is deactivated but able to make changes in PO. i.e. X is able to genrate version.
Client wants it as per earlier scenario. i.e. Both X and Y shud be able o generate version manually.
Is thare any authorization issue? or it got affetcted because of Release strategy cinfiguaration.....? How to resolve this?

Hi
New Versions of Purchasing Documents
The system always creates a new version when the purchasing document has reached a final state. This means one of the following processing states:
Active
If you do not use the document release functionality
Release completed
If you use the document release functionality
For a new version of a purchasing document to be created, all messages must have also been transmitted.
No new versions are generated for purchase orders that are on hold or not fully released.
Hope it helps
Regards
Prasanna R

Can JWS be used as a multiple Java version management tool?

WinNT4 WKS with JRE 1.3.1 - 1.4.2 loaded on it using IExplorer or Netscape.
We don't have a need for the JWS download features because our clients (and their applications) remain static for the most part. However, we do require multiple JRE version support because our customers have written class/objet "fixes" (mostly for text rendering) and these fixes break if you try and run the application on a different version of Java from which it was written. Basically, we can't have a default JRE on each machine and hope that it will work with all customer applications. So we will load all necessary Java components on our workstations (in this case JRE versions 1.3.1 - 1.4.2). I know that browsers can be forced to load with a specific Plug-in version (providing it exists on the machine) through Object & Embed tags in the HTML and that standalone apps can be directed to the correct Java directory path. My question is, can JWS automatically identify the Java requirements of our customers applications and act simply as a multi-version management tool to provide the right JRE/Plug-In for either standalone or browser applications? Keeping in mind that all the JREs will be loaded on the workstions and it won't need to download any components from some site.
I've noticed that JWS identifies all JREs loaded on a machine in the Java tab so I'm wondering if it can "switch" the environment as needed for each application.
Does anyone know if I can use JWS in the scenario I described above? Thanks!

JWS can manage the multiple JREs installed if you run the application through a .jnlp. This can not "switch" the default JRE. It runs the application specified in the .jnlp using the requested version specified in the .jnlp.
JWS does not apply to applets. You should use the object tags as you mentioned below.
...can JWS automatically identify the Java requirements of our customers applications
No. You must determine this and setup the .jnlp appropriately.

Version Management with Analysis workbooks? Doesn't save workbooks in BW Netweaver platform or BO Platform

SAP BusinessObjects Analysis, Edition for Microsoft Office - 1.4 SP6
SAP BusinessObjects BI Platform - 4.1 SP2
BW 7.3
SAP Logon pad - 7300.1.0.1074
We are trying to implement What-if analysis in Analysis Office tool like Revenue increase by N percentages. Excel formula applied for this in the adjacent column to keyfigures that is coming from BEx Query.
Here, I need to save the Workbooks in versions as V1, V2, V3, etc., for various percentages.
When I try to save this in BO platform, only the version V1 (first copy) is getting saved. But, the modified workbook is not getting saved with different name as V2 or V3, etc.,
When I try to save this Netweaver platform, even the first copy V1 is not getting saved. But it displays different versions in the save window before closing the Analysis Office application.
Please provide information on VERSION MANAGEMENT with Analysis Office.
Note: I see a difference in 'Open' and 'Save' window that is Roles are not visible in the 'Open Workbook' window but Roles are visible in 'Save Workbook' window.
Thanks,
Jeni.

SAP BusinessObjects Analysis, Edition for Microsoft Office - 1.4 SP6
SAP BusinessObjects BI Platform - 4.1 SP2
BW 7.3
SAP Logon pad - 7300.1.0.1074
We are trying to implement What-if analysis in Analysis Office tool like Revenue increase by N percentages. Excel formula applied for this in the adjacent column to keyfigures that is coming from BEx Query.
Here, I need to save the Workbooks in versions as V1, V2, V3, etc., for various percentages.
When I try to save this in BO platform, only the version V1 (first copy) is getting saved. But, the modified workbook is not getting saved with different name as V2 or V3, etc.,
When I try to save this Netweaver platform, even the first copy V1 is not getting saved. But it displays different versions in the save window before closing the Analysis Office application.
Please provide information on VERSION MANAGEMENT with Analysis Office.
Note: I see a difference in 'Open' and 'Save' window that is Roles are not visible in the 'Open Workbook' window but Roles are visible in 'Save Workbook' window.
Thanks,
Jeni.

Service PO version management

Similar Messages

Maybe you are looking for