Service preparation check
Hi All,
when i execute RTTCTOOL in solman dev,prd system i got following missing recommandation in prd ssyetm
8. [Note 1320940 ] SolMan does not fulfill s/w levels
Description BPA/BPO Scope 2: Your Solution Manager does not fulfill the minimum
software conditions in SAP note 1320940 . BPA/BPO Service Scope 2 is
supported as of SPS25.
Implementation Update your SAP Solution Manager stack to at least the levels mentioned in
the SAP note if you wish to get BPA/BPO.
But No recommandation shows in solman dev system
Also both system have same plug in and patch leval
Pls any suggest .how to prceed further
> Also both system have same plug in and patch leval
and both systems are connected to the same solution manager system?
Markus
Similar Messages
-
I have been listening to iturnes radion on my computer for months. now i get an error.
"an error occurred while contacting the radio tuning service. Check your internet connection, or try again later".
I have reset the cache but nothing seems to help. Any help???
55AnnieSomebody suggested clearing the Store cache. I don't know why that would affect the radio. Seems to have not worked for some, worked for a few or maybe they imagined it. Many other posts about this if you browse the forum.
This is happening to some people some of the time in some places, but then not affecting people in other places, or in the same place at different times. You try to guess what is going on. Hasn't happened to me. Maybe it's my iTunes 7.5, or maybe it's luck of the draw since I never use iTunes radio.
Complain to Apple:
http://www.apple.com/feedback/itunesapp.html
Oh, don't expect Apple to say anything about this -- that's not their style. -
For over a week,I get the following message everytime I have tried to connect to ITunes Radio..."An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later." My internet connection is excellent & strong & "LATER " has been over a week. Any help or suggestions?? It would be much appreciated, thanks
Somebody suggested clearing the Store cache. I don't know why that would affect the radio. Seems to have not worked for some, worked for a few or maybe they imagined it. Many other posts about this if you browse the forum.
This is happening to some people some of the time in some places, but then not affecting people in other places, or in the same place at different times. You try to guess what is going on. Hasn't happened to me. Maybe it's my iTunes 7.5, or maybe it's luck of the draw since I never use iTunes radio.
Complain to Apple:
http://www.apple.com/feedback/itunesapp.html
Oh, don't expect Apple to say anything about this -- that's not their style. -
An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later. Is anyone getting this msg when trying to obtain a radio station?
Check the More Liike This box oon the right, or do a search of this forum.
Radio seems to have issues now. -
I installed viber on my iPhone 5s. After entering my number, it says:"
No Service
It seems to be a problem connecting to viber's service.please check your connection and try again"
Nevertheless I have connected to the internet.
Could you please help me?Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
"Present Online
Error starting online presentation
Cannot connect to this service. Check your network connection and try again."
On March 31, we starting experiencing this issue across our entire domain. We have not made any changes to our network configuration. We are using the same ISP, routing hardware, computer hardware, software versions and group policy settings as we were on March
30.
The issue appears to be related to network connectivity.
Here is what I have found so far:
We have three networks in our building and two ISPs.
Network-A uses ISP-A and is affected by the issue. Network-A is our corporate domain.
Network-B uses ISP-B and is affected by the issue.
Network-C uses ISP-B and is not affected by the issue.
If I take a Network-A domain member and launch PowerPoint while connected to Network-A and ISP-A I am unable to upload PowerPoint presentations.
If I connect the same computer to Network-C, the issue persists.
If I close PowerPoint, connect to Network-C, and reopen PowerPoint while connected to Network-C, I am able to upload presentations.
A non-domain computer is affected by the issue if PowerPoint is opened while connected to Network-A or Network-B, but unaffected if PowerPoint is launched while connected to Network-C. Again, in this scenario, switching connections while PowerPoint is open
has no effect.
The issue appears to be caused during PowerPoint start-up and not while attempting to share a document.
Microsoft is either unwilling or unable to find a resolution and has finally resorted to simply ignoring my calls, voicemails, emails, and ticket requests regarding this issue. Any suggestions would be greatly appreciated.
Here is a brief description of our configuration and what I have tried so far.
Windows Installer Version 5.0.7601.18493
OS Details Microsoft Windows 7 Enterprise , SP 1, Version: 6.1.7601, Codepage: 1252, Country Code: 1, Language: 1033, System Type: x64-based PC
Microsoft Office 365 ProPlus - en-us
ProductVersion 15.0.4701.1002
License Family: OfficeO365ProPlusR_Subscription1
License Status: 1 - LICENSED
Intel Core i3
4GB DDR
ISP-A => 100mb fiber
ISP-B => 30/50mbps down / 3/5mbps up cable
Clearing the internet cache
Clearing the OneDrive cache
Adding all related office.live URLs to trusted sites
Selecting lowest security settings for trusted sites
Changing permissions on the .ppt file to allow full permissions to everyone
Creating a blank PowerPoint presentation
Changing the location of the .ppt file to the local drive's user folder
Upgrading Office
Repairing Office
Downgrading Office
Installing Skype (Microsoft recommendation)
Leaving the domain
Rebooting the routers and switches on Network-A
Rebooting the router on Network-B
Upgrading the firmware for the router on Network-B
Disabling the firewall on Network-B
Enabling the firewall on Network-C(in an attempt to induce the problem)The problem seems to have fixed itself, the computer may just have needed to be restarted.
-
While Apple tries to figure out what's wrong I came upon a great workaround for those of us that like the radio feature of iTunes. This actually doesn't take long either.
When trying to expand the categories you get the error "An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later." This happens enough to think that the service is completely broken. Actually, it seems intermittent. Try clicking it a few times. you WILL GET THROUGH. When you do get there, highlight all of the stations(or just the ones you want), create a playlist (I use the name of the category as I take the entire list), and paste into the playlist. You can then play the stations EVERY TIME from the playlist. Works perfectly.
It doesn't seem to have anything to do with what version of iTunes you have or what plugin you have. I have seen this on over 600 computers - Windows & MAC - and the workaround is 100%.
Let me know how you make out. And, PLEASE SHARE THIS FIX!!!Yes indeed, this workaround was posted a few days ago at https://discussions.apple.com/message/17739684
-
I have been using iTunes for years to connect to the radio and just recently tried to tune in and an error sign pops up stating " A error occurred while contracting the radio tunning service. Check your internet connection or try again later." There's no problrm with my internet service so what's up?
You are probably using an old version of iTunes with which the stream link service seems to have stopped working for many users of older iTunes. No, Apple makes no comment about this kind of thing. It may reappear, it may not (it has been dead for over a week now). Your solution is to upgrade the operating system version on your computer from 10.5.8 to 10.6.8 so you can run a newer iTunes, or live without. You can still open streams if you can get the URL, and you can then save them as playlist items.
-
Question: I am getting this message from iTunes on my iMac:
An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later.
Can't find a way to fix this. Does anyone have any suggestions?Yeaaaah... I just powered up my G3 iMac... iTunes 7 on there... My iTunes on there can't do much. But it's still subscribed to one podcast that's still valid and working. If I try to use the radio, I get this message. I wager they changed urls and the like in the background years ago and this is just so old there's no longer any support for it.
-
Hi I currently use lightroom 4 and have never had an issue uploading photo books to blurb.but now when i try a message appears saying "could not contact blurb web service.please check internet connection" my internet connection is fine.please can somebody help me as i need to get the album done as it is a wedding album and the clients are waiting on it.many thanks,Sean.
Hi,
I got this problem sorted and it actually very easy. For some reason the settings on the windows page i use on my laptop conflicted with the blurb/lightroom upload. All you need to do is set up a new windows user page and set it up as admin. You will need to transfer all the photos from the lightroom on your current user page to the new one which can be annoying but at least you will hopefully get up and running again. I hope this helps,
Sean. -
ITunes radio was working last night and now today I get the message "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later"
What's up?Two things to try, first, reset your PRAM.
Next, try rebooting your computer.
Please post back with results, -
What can I do after receiving the following message: "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later".
I have received this message the last 3 days, is itune radio down or am I the only one experiencing this type of problem?
Need help.
Thanks
Sam3Ok.. Apparently it's not just me
Apple needs to make a statement or something on this issue. I'm running Lion OS X 10.7.3 -
An error occurred while contacting the radio tuning service. Check your Internet connection, or try again later.
The Wireless connection is FINE and the INTERNET and E-Mail work fine.
The RADIO has worked for over a year with NO PROBLEM and this JUST STARTED 2 Days ago,
HELP!Have you read the other several hundred posts about this over the past few days? Do any of their suggestions help?
Report the issue to Apple (this is just a user assistance forum with other users like you) since it is posssibly something at their end:
http://www.apple.com/feedback/itunesapp.html -
Security Optimization Self-Service. Checking profiles
Dear All,
I am using Security Optimization Self-Service and would like to know if there is a way to implement a "customer specific authorization check" to evaluated if somebody is granted with profiles SAP_NEW or SAP_ALL_DISPLAY.
I will appreciate ideas and suggestions.
Regards,
FedeX.No idea, but if there is nothing in the trace or SU53, then typically the check is either performed against a different user (possibly in a different system) or it is dependent on a config setting first, and not authorizations.
Normally I look around in the menus of the transaction to see whether there is a config option there, failing which use System -> Status -> Navigate and expand the object hierarchy. Keep your eye out for a view.
Otherwise, take a look in the PBO (Process Before Output) module to see what is setting this in the dynpro.
A shot in the dark, but might help in the right direction.
Cheers,
Julius -
Forms Services availability checking for BIGIP Load Balancer
We are load balancing across a number of 10.1.2.2 Forms servers using a BIGIP load balancer. Currently our load balancing is done based on which server has the "least connections" to the BIGIP. So far we have been using the following test URL to allow BIGIP to check the availability of the Forms Services on each server.
http://server:port/forms/frmservlet?ifcmd=status
This works well however it only checks through to the HTTP level within Forms Services. We encountered a problem when the Forms Services failed to work on a particular server however the above URL showed that everything was OK. The effect of this was that all new users attempting to login were directed to the failed server as this server had the "least number of connections".
After raising an SR with Oracle they advised that the forking of runtime processes had probably failed and this was not detectable by the load balancer with the above URL. So they have recommended a number of options for checking the status of the Forms Services. These are:
a) http://server:port/forms/frmservlet
This loads the default Form and therefore by definition tests the forking of runtime processes. However BIGIP is unable to automatically process the information to distinguish whether the service is up or down. Oracle recommended that if using this method we would need to customise BIGIP to handle the various FRM-xxxx error codes.
b) http://server:port/forms/frmservlet?userid=scott/tiger@YOURDB&form=yourtestform.
fmx
Even more thorough would be to actual log on to the database using a test form as above.
My question is does anyone out there have experience in checking Forms Services availability using these last two methods as I'm not sure how to customize the load balancer so that it can handle the output of these URLs. Also when using the original URL is it normal to load balance using a "least connections" method or do people out there use a different algorithm.
Thanks for any help/advise that you can give.
Regards,
PhilippeWell SR followed up and it looks like the only course of action is to use the standard HTTP check: http://server:port/forms/frmservlet?ifcmd=status ...
... unless that is you want to do some serious customisation. Oracle don't support any other form of checking.
I'm guessing from the lack of responses to this thread that this hasn't been an issue for anybody else ... ???
Any thoughts/suggestions really welcome as we go into production in 4 weeks.
a) What do people recommend for load balancing Forms ... least connection, round robin ... ?
b) Do people use http://server:port/forms/frmservlet?ifcmd=status or have some of you used something else?
Thanks,
Philippe
Maybe you are looking for
-
Itune forces to setup as new ipad or restore from backup?!
I have 3 ipads and 2 iphones in my house sharing the same apple ID, but when I tried to connect one of the ipads to itune on my PC, it only gives option to set up as new phone or restore from backup, either option would wipe out the data I already ha
-
How do I sync ipad with Apple TV since updating software
I have finally updated the ipad software and now it won't sync up with the Apple TV... Help.
-
How can you create a drop down list of specific numbers that are in scientific notation?
Is the best way to do this by constructing an enum and setting the individual values to a case structure which has constants that are the desired values... or is there a more straightforward way of doing this?
-
Server returned HTTP response code: 500.. i need help
i have this applet that communicates with a servlet.. when the applet connects to the servlet, i get the Server returned HTTP response code: 500 error.. when i am testing in my own pc, everything is fine.. when i tried deploying it in a server, the e
-
EJB3 : suspend JTA transaction does not release the connection in the XA DS
Hi all, I did a test and after suspending a JTA transaction I note that in the xa datasource the activeconnection = 1. So is it normal because I was thinking that when I suspend the transaction the teh connection is released and then after a transact