EJB3 : suspend JTA transaction does not release the connection in the XA DS

Hi all,
I did a test and after suspending a JTA transaction I note that in the xa datasource the activeconnection = 1.
So is it normal because I was thinking that when I suspend the transaction the teh connection is released and then after a transaction resume I could continue the transaction with another connection of the xa datasource ?
Thank you for all..
Christophe.

It's a long time ago, but did you ever solve this problem?
I'm having the same issue with OSB writing to a WLS8.1 JMS queue.
I have a development OSB server which works fine.
Pete

Similar Messages

JInternalFrame is closed, but does not release the memory

Hi,
I have problem with using of JInternalFrame.
I create a new internal frame, and close it."setClosed(true);dispose();"
The frame does not release the memory (after gc the allocated memory is the same)
Before close I removed all listeners, and closed all reference to other object. (I think so :-) )
Do You have any idees?
regards
G�bor

Hi,
I think u will have to release all the associated used objects. or you can also call the finalize() method in order to release the memory.
Regards,
Balaji.SN

JMF Does not release the RTP ports

Hi,
I am working on a program that simply listens RTP messages from the network and play them on a PC. My datasource is created as follows:
String url2= "rtp://127.0.0.1:10000/audio/1";
medialocator=new MediaLocator(url2);
ds=Manager.createDataSource(medialocator);
This ds will later be given to a player for the local playback. It has a flow like this: DS->Processor->DS->Player.
Everything works fine for the first execution. The stream is played. However when I stop the player, processor and even the ds, JMF does not realease the RTP ports. I still can see them in the netstat output. Heres how I try to release the resources:
public void releaseResources(){
try{
if(player!=null){
player.stop();
player.deallocate();
player=null;
if(ds2!=null){
ds2.stop();
ds2.disconnect();
ds2=null;
if(processor!=null){
processor.stop();
processor.removeControllerListener(this);
processor.deallocate();
medialocator=null;
ds=null;
Because of this problem, when I try to do the same thing on the same url after sometime, it gives the error "Cannot create the RTP Session: Can't open local data port: 10000". The ports are released after I shutdown the JVM.
Does anyone have an idea on how to release this ports in the same JVM session?
Thanks a lot,
Murat

DataSource objects open a connection to their source, in your case, a connection to an RTP port. You need to call
ds.disconnect()
on both datasources, but SPECIFICLLY on ds (as opposed to ds2) if you want it to release the port.

JTA Transaction does not work

Hi,
I am currently porting an application from Websphere 3.5 to Weblogic 6.1.
I have an Oracle 8.1.7 database.
I have a problem when rollbacking JTA transaction.
I have a session bean manipulating Entity beans (CMP & BMP) within a single
method.
This method creates beans and then update them.
The issue is that during the update, the application generates an exception
(system or applicative). The method rollbacks the transaction, but if I look
in the database, the insert requests are not rollbacked !
I have tried two different approach:
1) container manage transaction: I catch the exception and then call
setRollbackOnly()
2) bean manage transaction: I retrieve the user transaction, and apply the
rollback on exception.
What's wrong with that ? This actually works fine on Websphere.
Regards
Jacques Desmazieres

Make sure that you are using a TxDataSource and not a plain DataSource.
(This is configured in the console.)
-- Rob
Jacques Desmazieres wrote:
Hi,
I am currently porting an application from Websphere 3.5 to Weblogic 6.1.
I have an Oracle 8.1.7 database.
I have a problem when rollbacking JTA transaction.
I have a session bean manipulating Entity beans (CMP & BMP) within a single
method.
This method creates beans and then update them.
The issue is that during the update, the application generates an exception
(system or applicative). The method rollbacks the transaction, but if I look
in the database, the insert requests are not rollbacked !
I have tried two different approach:
1) container manage transaction: I catch the exception and then call
setRollbackOnly()
2) bean manage transaction: I retrieve the user transaction, and apply the
rollback on exception.
What's wrong with that ? This actually works fine on Websphere.
Regards
Jacques Desmazieres

Plugin to import Aperture librairies does not release the memory used by the librairy after the import is completed

Let suppose I import a 30GB Aperture Library into LR which is on my HD. After the importation, if I send the imported library to the Trash and clear the Trash the disk space is not released by LR. So after a few importations I get the message that I do not have enough space on my HD to copy another library on the HD from an external drive which contains many Aperture libraries.

Casita17, I recommend you evaluate ssprengel's questions and advice. Please read the following below, as we don't want you to lose images! I fear that you may be using a "referenced" library in Aperture, and this is the reason your disk space is not being released. I would NOT RECOMMEND breaking your library into pieces for now. You may very likely lose critical linkages, especially in albums. If you have a number of Aperture libraries to begin with, then never mind. Just be aware, Lightroom users generally recommend using only one lightroom catalog, which it sounds like you're doing.
Lets forget your system drive for now. Do you have two times the disk space on your photos drive? If not, do you have another drive laying around with as much space? I recommend you make a backup before you continue.
I'm not quite sure what approach your are using, but I think the root cause of your dilemma exists because of how Aperture and Lightroom manage and store your images. It may help to post what actions you take, step by step, and include the error messages.
You may already know some of these concepts, but lets leave no stone unturned.
First, Aperture uses "libraries", which contain all metadata and previews. These images may be stored within the database (managed images), outside the database (referenced images), or a combination. Can you apply a filter to your all photos selection, and tell us how many managed and references images you have?
Please read this for a better explanation:
http://www.lifeafterphotoshop.com/managed-vs-referenced-files-in-aperture/
Second, Lightroom's catalog is like an Aperture library. Only ALL images are stored externally, "referenced" in Aperture parlance.
You should be able to create the Lightroom Catalog on any drive. However, where you eventually store your images depends on what options you choose in the plugin when importing these images.
Any "managed" photos in Aperture WILL BE copied to the location you specify in the plugin. Any "referenced" files MAY OR MAY NOT BE copied to the location. They may be copied, or they they may remain in place, depending what options you select in the plugin.
Not sure I follow where you have your aperture library, images, and where you eventually want to store your Lightroom catalog, and where you want to store your lightroom images. I'd suggest not breaking up your Aperture library.
If you are short on disk space, I suggest making a backup. Then, select all photos and change them from managed to referenced, which will relocate the photos from within the library, to outside the library, preferably on the same drive. Then, create a Lightroom catalog, wherever you have room.
Run the plugin and choose the option NOT to copy the files. This way, it will leave them in place on your photo drive. Some images may be copied to the lightroom masters destination any way, so you may want to choose another location on your photo drive in the plugin import options anyway.
When the migration finishes, you can delete the Aperture library, which will not remove all that much, and will not make much more space available. And do NOT delete the image location you designated in Aperture, because you'll now be using it for Lightroom. But this way, you'll be able to keep your space usage under control.
But KEEP your backup, even after the migration, JUST IN CASE!

Oci_close does not release the connection when using DRCP

Hello everyone,
we are currently testing the deplyment of DRCP with 11g. I have the whole thing setup (correctly to my best knowledge), but I am facing an issue. The call to oci_close does not seem to release the connection to the pool as I would expect and therefore we see similar behavior like we were getting without using the DRCP.
Our setup is using two RAC instances running 11.1.0.6.0, I am using PHP 5.1.6 with PECL installed oci8 1.3.4. The DRCP pool is configured and started, each with 100 max servers.
When the webserver is idle it looks, well, idle.
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 0
2 0
The script is as simple as it gets:
<?php
$c = oci_pconnect('scott','tiger','IWPPOOLED');
$s = oci_parse($c, 'select * from emp');
$r = oci_execute($s, OCI_DEFAULT);
oci_close($c);
sleep(30);
?>
What I would expect is that the script would connect to the pool, do the work for a tiny moment and then release the connection for usage by other script.
But after I point the browser to the script, I get a 30 second loading time (as expected) but the server is busy all the time, like this:
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 0
2 1
After the 30 second sleep, it is released and busy servers are back to 0.
If I load the server with ab using 256 connections:
ab -n 1000000 -c 256 -k http://mywebserver/ocitest.php
the pool is maxed out and the connects are stalling:
SQL> SELECT INST_ID,NUM_BUSY_SERVERS FROM GV$CPOOL_STATS;
INST_ID NUM_BUSY_SERVERS
1 95
2 95
My network config for this service is following:
IWPPOOLED =
(DESCRIPTION =
(LOAD_BALANCE=ON)
(FAILOVER=ON)
(ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.33)(PORT = 1521))
(ADDRESS = (PROTOCOL = tcp)(HOST = 10.1.16.34)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = IWP)
(SERVER=POOLED)
(FAILOVER_MODE=
(TYPE=SELECT)
(METHOD=BASIC)
(RETRIES=5)
(DELAY=3)
The phpinfo() look like this:
OCI8 Support enabled
Version 1.3.4
Revision $Revision: 1.269.2.16.2.38.2.20 $
Active Persistent Connections 1
Active Connections 1
Oracle Instant Client Version 11.1
Temporary Lob support enabled
Collections support enabled
Directive Local Value Master Value
oci8.connection_class IWPAPP IWPAPP
oci8.default_prefetch 100 100
oci8.events On On
oci8.max_persistent -1 -1
oci8.old_oci_close_semantics Off Off
oci8.persistent_timeout -1 -1
oci8.ping_interval -1 -1
oci8.privileged_connect Off Off
oci8.statement_cache_size 20 20
I am using the instant client for 11g
Any ideas?
Thanks!
Michal

Don't forget to use oci_free_statement($s); See "Closing Oracle Connections" in The Underground PHP and Oracle Manual. (I was just simplifying this example today for the next release of the manual).
You may also see the "dedicated optimization", where a pooled server in a non- maxed-out pool is retained (unless needed by another PHP process) under the assumption that the initial PHP process might become active again. See http://www.oracle.com/technology/tech/php/pdf/php-scalability-ha-twp.pdf
Feel free to email me offline (see my profile) if there are questions/data you don't want to post.
cj
Edited by: cj2 on Oct 16, 2008 8:12 AM

Photoshop does not release memory after closing document.

When I close a large document Photoshop does not release the memory. If I open another document the program is slow and not resposive. If I close out of Photoshop and restart it then load the other document it is quick and responsive again.

A bit late to the party here but this issue is still live and I can't find anything else on the forum similar to it (apologies if there is).
Photoshop does not seem to re-use memory it just keep allocating new right up to the limit before the prog crashes (same applies to Fireworks) so any batch/script processing of more than a handful of files is impossible.
I am Photoshop via Creative Cloud (so I am always updated to your latest release), Windows 7 64k with 8Mb memory and am using Norton Intenet Security 20.3.1.22 which is updated daily.

EMac modem does not release phone line

I have an original eMac. The modem is capabale of receiving and sending faxing. However, occasionally it does not "release" the phone line causing any incoming fax to get a busy signal and if you try to dial the phone number you also get a busy signal. Unplugging the phone line from the modem port resolves the issue as does restarting.
What can be done to fix this issue besides getting a new modem.
Thanks!

I recall having similar problems with my home pre-broadband dial-up account under 10.1.5. That was blamed on the computer modem and the ISP modems implementing different versions of the same modem protocol (which certainly doesn't say mush for the 'standard' part of the v.92 protocol). That I thought was fixed in later versions of OS X, but you may still want to contact your ISP to ask them if they're aware of other Mac dial-up users with the same problem and if they can suggest any modem commands to add to your modem command strings. You can ask them to check on their end to see if they're receiving the line release command from your modem when you attempt to hang up.
Since most Mac-related questions to ISP support seem to garner a response of "huh?", your other option would be to try dropping the modem protocol from v.92 to v.90 (and if necessary even lower) to see if those protocols are more compatible with your ISP's modem banks.

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

JTA transaction is not present or the transaction is not in active state

Hi,
I am trying to execute an asynchronous bpel process. the bpel process has 5 OSB calls and is taking approximately 100 seconds for completion. The OSB calls in the BPEL are taking 90 seconds for completion. In the end of the BPEL process, after completion I get the following error:
[2010/07/22 01:56:44] BPEL process instance "1220007" completed
[2010/07/22 01:56:44] There is a system exception while performing the BPEL instance, the reason is "JTA transaction is not present or the transaction is not in active state. The current JTA transaction is not present or it is not in active state when processing activity or instance "1,220,007". The reason is The execution of this instance "1220007" for process "BPELProcess1" is supposed to be in a jta transaction, but the transaction is not present or in active state, please turn on the application server transaction debug logs to get more information.. Please consult your administrator regarding this error. ". Please check the error log file for more infromation. Please try to use bpel fault handlers to catch the faults in your bpel process. If this is a system exception, please report this to your system administrator. Administrator could perform manual recovery of the instance from last non-idempotent activity or dehydration point.
We do not want to increase the transaction-timeout properties in the server in the Transaction-manager.xml or in the orion-ejb-jar.xml since we have other projects with synchronous processes running in the same server.
Can anybody please suggest a workaround to overcome this issue apart from increasing the transaction-timeout?

Hi 783703,
As Sridhar suggested for your problem you have to set transaction-time out in j2ee/home/config/transaction-manager.xml.
If you use Idempotent as false for your partnerlinks, BPEL PM will store the status till that invoke(Proof that this invoke gets executed).
So better to go for increasing the time instead of going for idempotent as it has some side effects.
And coming to dehydration ....Ideally performance will be more if there are no much dehydration poitns in our process. But for some scenarios it is better to have dehydration(ex: we can know the status of the process...etc)
Dehydration store will not get cleared after completion of the process. Here dehydration means ....it will store these dtails in tables(like Cube_instance,cube_scope...etc).
Regards
PavanKumar.M

OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigale

because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP]

My PC does not see the curve 8520

my BB desktop software does not connect to the curve 8520
I already performed the simple obvious things (chek th cable...etc)
desktop software is release 7.1.0.32
with the bold 9700 the software worked well
I have to change because I crashed the screen of the bold 9700
can anyone help?
Roberto

Hi and Welcome to the Community!
Here is the list of troubleshooting articles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone due to administrative permissions
KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when user account control is enabled
KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when a full version of Roxio® Media Manager is installed
KB28456 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone when USB selective suspend setting is enabled
KB28444 The BlackBerry smartphone is not detected by BlackBerry Desktop Software when connected by USB to a USB hub or a docking station
KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when it is connected via USB
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB00125BlackBerry Desktop Software cannot detect the BlackBerry smartphone
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Also check on conflicting software...it has been reported that the software package NTI Shadow&Ninja can cause a conflict; removing them and reinstalling the BB desktop software allows it to install correctly.
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. Also apologies if any are not presently available...RIM takes them up and down at will as they revise things.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

"An autonomous transaction does not see any changes made by main transact"

Hi,
I'm trying to reproduce the "An autonomous transaction does not see any changes made by main transaction" reffered on :
Oracle® Database Application Developer's Guide - Fundamentals
10g Release 2 (10.2)
Part Number B14251-01
chapter 2 SQL Processing for Application Developers
Paragraph : Autonomous TransactionsI set up a simple case...
create table emp_ as select * from emp
begin
update emp_ set hiredate=hiredate+100 where empno=7934;
end;
create or replace trigger trg_emp_
after insert or update on emp_
for each row
declare
    pragma autonomous_transaction;
    emp_var emp.hiredate%type;
begin
    select hiredate
      into emp_var
      from emp_
    where empno=:new.empno;
    dbms_output.put_line('empno: '||:new.empno);
    dbms_output.put_line('old hiredate: '||:old.hiredate);
    dbms_output.put_line('new hiredate: '||:new.hiredate);
end;Prior to any change...
SQL> select empno,hiredate from emp_;
EMPNO HIREDATE
5498 21/4/1982
5499 11/10/1981
5411 10/10/1981
5410 10/10/1982
7369 17/12/1980
7499 20/2/1981
7521 22/2/1981
7566 2/4/1981
7654 28/9/1981
7698 1/5/1981
7782 9/6/1981
7788 19/4/1987
7839 17/11/1981
7844 8/9/1981
7876 23/5/1987
7900 3/12/1981
7902 3/12/1981
7934 23/1/1982After the change...
SQL> begin
2    update emp_ set hiredate=hiredate+100 where empno=7934;
3 end;
4 /
empno: 7934
old hiredate: 23/01/82
new hiredate: 03/05/82
PL/SQL procedure successfully completedAccording to the Oracle doc the select of the autonomous transaction should not see the change made to the hiredate column of the table in the main transaction(in the anonymous block)....
What may i do wrong..????
Thank you,
Sim

Simon:
As Tubby pointed out, your dbms_output commands do not display the value you selected in the trigger. Your trigger based demonstration needs to be more like:
SQL> SELECT * FROM t;
        ID DT
         1 05-SEP-2009
         2 17-JUL-2009
SQL> CREATE TRIGGER t_ai
2     AFTER INSERT OR UPDATE ON t
3     FOR EACH ROW
4 DECLARE
5     PRAGMA AUTONOMOUS_TRANSACTION;
6     l_dt t.dt%TYPE;
7 BEGIN
8     SELECT dt INTO l_dt
9     FROM t
10     WHERE id = :new.id;
11     DBMS_OUTPUT.Put_Line ('ID: '||:new.id);
12     DBMS_OUTPUT.Put_Line ('Old dt: '||:old.dt);
13     DBMS_OUTPUT.Put_Line ('New dt: '||:new.dt);
14     DBMS_OUTPUT.Put_Line ('Aut dt: '||l_dt);
15 END;
16 /
Trigger created.
SQL> UPDATE t SET dt = sysdate WHERE id = 2;
ID: 2
Old dt: 17-JUL-2009
New dt: 25-OCT-2009
Aut dt: 17-JUL-2009
1 row updated.So, the automomous transaction select did not see the changed value of dt.
I know you are just trying to understand automomous transactions here and would never do sometihg like this in production right? :-)
Your trigger, as written, has some interesting side effects because of the automomous transaction. For example:
SQL> INSERT INTO t VALUES(3, sysdate - 25);
INSERT INTO t VALUES(3, sysdate - 25)
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OPS$ORACLE.T_AI", line 5
ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'
SQL> UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy');
UPDATE t SET id = 3 where trunc(dt) = TO_DATE('05-Sep-2009', 'dd-mon-yyyy')
ERROR at line 1:
ORA-01403: no data found
ORA-06512: at "OPS$ORACLE.T_AI", line 5
ORA-04088: error during execution of trigger 'OPS$ORACLE.T_AI'John

OCS package SAPK-60501INEAPS does not match the current software component

Hi Friends.
I installed NetWeaver 7.02 with ECC 605. When I try to update EA-PS component (SAPKGPPD16) with SPAM (7.02/0043) to SAPK-60501INEAPS, I got the following errors:
- OCS package SAPK-60501INEAPS does not match the current software component vector
- EA-PS,605 Non-permitted release of add-on EA-PS installed

I downloaded K-605DHINEAPS.SAR from marketplace.
In the note 1456663 there is a workaround for SEM_BW and FINBASIS components.
"Load ACP (attribute change package).
Before starting the installation of SEM_BW or FINBASIS load the attached file "ACP_EHP5_on_NW702.SAR" into your system (Transaction SPAM -> Support Package -> Load Packages -> from Frontend). Otherwise the installation will require a stack XML file which cannot be provided for this scenario."
My question is, I just can generate the stack XML file with Solution Manager?
Best regards.
Cesar Teixeira

PI sheet does not show the table of materials to be consumed.

Hello,
Weu2019re trying to customize the pi-sheet on SAP 4.7 (SAP-APPL Release 470) and weu2019re having some problems.
On transaction O12C (Define Process Instruction Categories), weu2019ve created an Instruction Category for Material Consumption using Type of the process data request equal to Repeated process data request. Doing this, when we create a Process Order, the PI sheet does not show the table of materials to be consumed.
If we use Type of the process data request equal to Simple process data request instead of Repeated process data request, the PI Sheet works well (The table of materials to be consumed are showing).
Thanks in advance.

Hi,
Is the issue resolved...? If yes then how...
If not, then can you please elaborate more on the process instructions charateristics you have used. Just list first ten characteristic and there values.
Regards
Neeraj

EJB3 : suspend JTA transaction does not release the connection in the XA DS

Similar Messages

Maybe you are looking for