PowerPoint - Present Online - Error starting online presentation - Cannot connect to this service. Check your network connection and try again.

"Present Online
Error starting online presentation
Cannot connect to this service. Check your network connection and try again."
On March 31, we starting experiencing this issue across our entire domain. We have not made any changes to our network configuration. We are using the same ISP, routing hardware, computer hardware, software versions and group policy settings as we were on March
30.
The issue appears to be related to network connectivity.
Here is what I have found so far:
We have three networks in our building and two ISPs.
Network-A uses ISP-A and is affected by the issue. Network-A is our corporate domain.
Network-B uses ISP-B and is affected by the issue.
Network-C uses ISP-B and is not affected by the issue.
If I take a Network-A domain member and launch PowerPoint while connected to Network-A and ISP-A I am unable to upload PowerPoint presentations.
If I connect the same computer to Network-C, the issue persists.
If I close PowerPoint, connect to Network-C, and reopen PowerPoint while connected to Network-C, I am able to upload presentations.
A non-domain computer is affected by the issue if PowerPoint is opened while connected to Network-A or Network-B, but unaffected if PowerPoint is launched while connected to Network-C. Again, in this scenario, switching connections while PowerPoint is open
has no effect.
The issue appears to be caused during PowerPoint start-up and not while attempting to share a document.
Microsoft is either unwilling or unable to find a resolution and has finally resorted to simply ignoring my calls, voicemails, emails, and ticket requests regarding this issue. Any suggestions would be greatly appreciated.
Here is a brief description of our configuration and what I have tried so far.
Windows Installer Version 5.0.7601.18493
OS Details Microsoft Windows 7 Enterprise , SP 1, Version: 6.1.7601, Codepage: 1252, Country Code: 1, Language: 1033, System Type: x64-based PC
Microsoft Office 365 ProPlus - en-us
ProductVersion 15.0.4701.1002
License Family: OfficeO365ProPlusR_Subscription1
License Status: 1 - LICENSED
Intel Core i3
4GB DDR
ISP-A => 100mb fiber
ISP-B => 30/50mbps down / 3/5mbps up cable
Clearing the internet cache
Clearing the OneDrive cache
Adding all related office.live URLs to trusted sites
Selecting lowest security settings for trusted sites
Changing permissions on the .ppt file to allow full permissions to everyone
Creating a blank PowerPoint presentation
Changing the location of the .ppt file to the local drive's user folder
Upgrading Office
Repairing Office
Downgrading Office
Installing Skype (Microsoft recommendation)
Leaving the domain
Rebooting the routers and switches on Network-A
Rebooting the router on Network-B
Upgrading the firmware for the router on Network-B
Disabling the firewall on Network-B
Enabling the firewall on Network-C(in an attempt to induce the problem)

The problem seems to have fixed itself, the computer may just have needed to be restarted.

Similar Messages

I am trying to update my iPad 1 to the 5.1 version so I hooked it up ajd I click update and it just says cannot find a server please check your network settings or try again later what should I do

I am trying to update my iPad 1 to the 5.1 version so I hooked it up ajd I click update and it just says cannot find a server please check your network settings or try again later what should I do

See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update.
 Cheers, Tom

An error occurred while configuring server as a directory server. Please check your network configuration and try again.

Hi there,
My Mac OS X Server 8.2 got buggered after I did the following steps:
Wiped Profile manager using "/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeD B.sh"
Clicking the Off button in the Profile Manager section of the Server.app
Clicking the On button of the same
Clicking on asks if I want to create a new directory master, but I know that one already exists. Trying to continue confirms this. So, I go and destroy it to start again, but afterward, I get the following error when trying to create the directory master:
I've done this enough times while watching the system log to see the actual error thrown, which is:
Nov 12 22:01:24 srv.domain.com Server[279]: An error occurred while configuring srv as a directory server:
    Error Domain=XSActionErrorDomain Code=-1 "A child action failed" UserInfo=0x7fee9516c0f0 {XSActionErrorActionsKey=(
        "Creating Open Directory master"
    ), NSLocalizedDescription=A child action failed}
I have Googled the above and have discovered only a few entries here in these Apple communities, but have found no joy.
Here's a similar threads:
https://discussions.apple.com/message/19237429#19237429
Interestingly/confusingly, this server has been working just fine as a domain master using different domain names (on separate occasions/setups). It was only after having clicked the OFF button in Profile Manager (after a wipe) that things stopped working.
I could rebuild this server, as I have a backup image of it that I can restore, but I'd rather find out what's broken and fix it so as to hopefully be able to fix it if/when this ever happens to me again, learning something in the process.
That said, I perform the following steps prior to running the Open Directory setup on a the server to try and clean it up as best possible.
Clean up steps:
Delete the DNS zone (and all entries).
Turn off all server services
Delete all file server sharepoints
Change the host name at Hardware => SRV => Network tab. This runs the Change Host Name program.
Close Server.app
Throw Server.app in the trash / Empty trash (I've also just trashed and put back with same result)
Delete the /Library/Server directory
Clear and recreate System keychain using "systemkeychain -vfcC" to clear out all the certs related to old host name.
Delete all the entries in the Login keychain
Reboot (probably don't have to)
Re-download and install Server.app
Run Server.app, which actually retains some settings from the last setup, though I don't know where to clean those.
After Server setup, confirm that the host name from step 4 is what I want.
Running "changeip -checkhostname" shows "Success". I'm using an Internet domain name so pinging the "internal" zone (srv.domain.com) resolves with the correct internal IP, and pinging the "external" zone resolves to the correct external address on the Internet.
It would seem like I'm all good to go, but when I try to turn on Open Directory and go through the setup prompts, I get the same "Confirm Settings" error as above.
The *only* way that I've come close to "fixing" this is to cancel out of the Profile Manager. Then, go destroy the open directory that already exists. Then create the domain via the Profile Manager enabling process. At present, this only seems work to for a "private" domain. Neither of the two Internet domain names that I've used successfully in the past work with this (or any) method.
Any advice or clues you can throw my way would be most appreciated.
Thanks,
Kim

Had the same problem found the answer here:
https://discussions.apple.com/thread/3264944?start=0&tstart=0

I am trying to use sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again - can anyone help me out

i am trying to sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again - can anyone help me out

Here are two threads you may want to review. I'm sure there are others. Good luck!
https://discussions.apple.com/thread/3427840?start=0&tstart=0
http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/

Regarding mac os x server 10.6 installation, getting an error" Please inspect your network setting and try again"

Hi,
we need your urgent help regarding mac os x server 10.6 installation, actually we are stuck in the installation at the point of Network settings. getting an error " Please inspect your network setting and try again" pls give us a solution of it , would be very thankful.
MTS

Well, there isn't much anyone can tell you without more information.
Clearly the installer is complaining about your proposed network configuration, but without seeing it, or knowing what you expect, it's almost impossible to advise.
I'd guess that it's some combination of the IP address/subnet mask and router address that's invalid, but without seeing them that's little more than a stab in the dark.

I have plugged my ipod 4th gen into my computer to reset it, and after agreeing to the trems a window pops up saying " it cannot restore your ipod. check your network settings or try again later. i dont know what to do! please help

hello. my ive been trying to restore my ipod touch 4th gen because it was frozen on the apple logo. i got it to go to the connect to itunes image. i plugged it into my computer to try and restore. i open itunes and it says "you must restore this ipod to use itunes". i click ok and then i accept the terms. after that it shows that it will take 41 mins to restore, but then it says "we connot restore this, there was a problem. it also says to check your network connections or try again" my network connetions are on and its still not working! please help

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

Error message:FRM-12001: Cannot Create the record group(check your query)

Requirement: Need to get employee name and number in the LOV in search criteria.
So I created LOV "full_name" and Record group Query under Employee Name property palette with
select papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name
,papf.employee_number
from apps.per_all_people_f papf, apps.per_person_types ppt
where sysdate between papf.effective_start_date and papf.effective_end_date AND papf.person_type_id=ppt.person_type_id AND ppt.system_person_type IN ('EMP', 'OTHER', 'CWK','EMP_APL')
AND PPT.default_flag='Y' and papf.BUSINESS_GROUP_ID=1
order by papf.full_name
I was unable to save and getting error message "FRM-12001: Cannot Create the record group(check your query)".
I cant use PER_ALL_PEOPLE_F.FULL_NAME since full name here is last_name||title||middle_names||firstname.
But my requiremnet is papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name .
Can any one of you help me.

First, Magoo wrote:
<pre>create or replace function emp_full_name ( p_title in varchar2,
p_last_name in varchar2,
p_first_name in varchar2,
p_mid_names in varchar2 ) return varchar2 is
begin
for l_rec in ( select decode ( p_title, null, null, p_title || ' ' ) ||
p_last_name || ', ' || p_first_name ||
decode ( p_mid_names, null, null, ' ' || p_mid_names ) full_name
from dual ) loop
return ( l_rec.full_name );
end loop;
end;</pre>
Magoo, you don't ever need to use Select from Dual. And the loop is completely unnecessary, since Dual always returns only one record. This would be much simpler:
<pre>create or replace function emp_full_name
( p_title in varchar2,
p_last_name in varchar2,
p_first_name in varchar2,
p_mid_names in varchar2 ) return varchar2 is
begin
Return ( Ltrim( Rtrim ( p_title
||' ' ||p_last_name
||', '||p_first_name
||' ' ||p_middle_names )));
end;</pre>
And second:
user606106, you did not mention how you got your record group working. However, you DO have an issue with spaces. If you change this:
<pre>select papf.title||' '||papf.last_name||', '||papf.first_name||' '||papf.middle_names emp_full_name
,papf.employee_number </pre>
to this:
<pre>select Ltrim(Rtrim(papf.title||' '||papf.last_name||', '
||papf.first_name||' '||papf.middle_names)) AS emp_full_name,
papf.employee_number</pre>
it should work. The Ltrim(Rtrim()) removes leading and trailing spaces from the resulting full name.

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?

summarizing:
iPod nano (what version iOS BEFORE update?)
downloaded music
updated iPod to iOS 8.1.2
Windows 7 PC
plug-in iPod to PC
error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
un-plug > re-plug iPod (how many times?)
iTunes un-installed from PC (?)
iTunes RE-installed to PC (?)
error message repeats(?)
searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?) EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
CANNOT instead of can't [ tsk tsk ]
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
follow all the instructions in order and let us know

TS3999 when I click on my iCloud panel, Calendars, I get an error message that says, Setup can't continue because Outlook isn't configured t have a default profile. Check you Outlook settings and try again." How do I set up these settings in Outlook 200

when I click on my iCloud panel, Calendars, I get an error message that says, Setup can't continue because Outlook isn't configured t have a default profile. Check you Outlook settings and try again." How do I set up these settings in Outlook 2007

Here are two threads you may want to review. I'm sure there are others. Good luck!
https://discussions.apple.com/thread/3427840?start=0&tstart=0
http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/

Facetime error "Could not sign in. please check your network connectivity and try again

When I try to log in to Facetime on my iMac, it gives me the an error. "Could not sign in. please check your network connectivity and try again" I have already tried fixing the time and I dont have any firewall installed

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Cannot communicate with the server. Verify your connection and try again.

Hi,
Recently I performed SharePoint 2010 upgrade to 2013 including Project Server 2010 to 2013.
Error "Cannot communicate with the server. Verify your connection and try again." shows when I access PWA over extranet, while its fine if I access from any system within local network.
Any idea what can be the issue ?
Regards,
Mehar

Hi,
Have you configured SSL configuration NLB. If yes, please add SSL URL in Alternate Access Mapping which is being configured on NLB
For instance. Add Https://servername instead of
http://serverame

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

HI there, I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep gettin this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.

I am having trouble updating my CS5 Master's Collection Suite for at least a month now. I keep getting this message "There was an error downloading this update. Please quit now and try again later" every time and do not know how to fix it.
Any help will be highly appreciated.
Thanks a lot in advance.
Sincerely,
Uvaldocj@@
Here is a list of the products I am troubled with:
Adobe After Effects CS5 10.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.

I'm having the same issue. And Dreamweaver now crashes after just a few seconds.

I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

I am trying to order a book with iphoto, I keep getting the same error message.
" A network error occurred while processing your order, please check your network connection and try again"
I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
I have ordered two books a few months ago without any problems.
Now I keep getting the same message either half way into
the order or at the final hurdle after the images have been uploaded.
Any ideas?
My shared Network has been fine and that does'nt seem an issue.
Help.

Try again in a couple of hours - sometimes it is a temp condition
LN

Why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

why does iTunes keep giving me bogus error messages. "Your internet connection is not working, check your connection and try again." My internet is working fine. iTunes is not working and will not allow me to download tunes.

This my sound too simple, but I just kept clikning on the arrow next to the selected music and it finally "Kicked" in.
I live in Europe ,So Be persistent and don't give up ! Aug. 2013

PowerPoint - Present Online - Error starting online presentation - Cannot connect to this service. Check your network connection and try again.

Similar Messages

Maybe you are looking for