Service registry: WS of ABAP provider not shown (CE 7.2)

Hi,
my aim: Consume web services of ABAP backend system in NWDS using service registry of CE 7.2.
Those web services should be registered automatically to the service registry when created in ABAP backend system.
What I've done:
1. Created ABAP backend system as provider system (when doing a PING it shows me the two services I would like to consume) in SOA configuration ->System connection.
2. Added ABAP backend system in services registry as Physical System in http://<hostname>:<port>/sr.
What do I have to do else to be able to consume web services in NWDS (import WSDL -> Service registry)?

Hi Srikishan,
unfortunately your link only shows how to import services from service registry, but not how to configure the service registry to automatically list web services of all provider systems.
One question to be answered:
Do I have to publish the web services of the ABAP backend system manually in service registry (by giving URL of WSDL) or is there a way that all services of this system are listed automatically?
Thanks in advance.

Similar Messages

  • Calling webservice - meta-inf/services/javax.xml.ws.spi.provider not found

    Hi,
    I have created an applet. Its running well in standalone application. But it is not getting referred in some other localhost. The JAXWS is not getting referred by the JRE. I'm getting the exception as invocation exception, and cannot find the META-INF/services/javax.xml.ws.spi.provider.
    Anyone can solve, pls reply me.

    your problem is too stuffed to understand properly..could you elobarate a lil bit

  • Consuming RepositoryFrameworkWS web service in WebDynpro for ABAP

    HI All,
    I would like to consume the below web service in Web Dynpro ABAP provided by SAP from Web Services Navigator.
    RepositoryFrameworkWS
    Using this web service I would like to write a file in KM repository. I am new to Web Dynpro ABAP and I am not sure how to use the below methods. The below methods will be shown once we import the Web Service on to SE80.
    Please help writing the code for following methods in Web Dynpro ABAP.
    CREATE_DOCUMENT
    GET_CONTENT_NEXT_CHUNK
    GET_CONTENT_FIRST_CHUNK
    SET_CONTENT
    Thanks
    Krish

    Hi,
    I am able to call the service and create a document in KM . I am providing userid and password in HTTP destination as this service requires basic authentication. Right now I am giving the userid and password in SM59. But I want to pass the userid and password from program itself for logged in user.  Please help me with the code for this.
    Thanks
    SK

  • Creation of Service Registry

    Dear Experts
    Im new to web services, i created a web service and i want to configure it in service registry, but i cant find suitable document for creating the service registry, help regarding creation of service registry will be highly appreciable
    Regards
    Arun.P

    Hi Arun,
    You don't need to create Services Registry, SAP provides it with AS Java versions 7.1 and later. If you have for example CE 7.1, 7.1.1, 7.2 or PI 7.1 or 7.1.1 in your landscape, you already have Services Registry.
    Services Registry is something like yellow pages for Web services - it only contains information about services that have been published. What you can do with it is to publish information about Web services, classify them in categories, and retrieve this information. For more details, see [Services Registry|http://help.sap.com/saphelp_nwpi711/helpdata/en/d9/0f7e2c1c644992a195d38cfec1b1f2/frameset.htm].
    The configuration of Web services is performed outside of Services Registry. For ABAP Web services you should do this in [SOA Manager|http://help.sap.com/saphelp_nwpi711/helpdata/en/b0/787748cf3a4200bb1ba32a62aa8519/frameset.htm], and for Java Web services you should do this in [NetWeaver Administrator|http://help.sap.com/saphelp_nwpi711/helpdata/en/44/4d2bb1c6b00597e10000000a155369/frameset.htm].
    Hope this helps,
    Rossen

  • Search in: "Service Registry" option doesnt appear - Configuration

    Hello,
       I´ve tried the configuration of the Visual Composer for searching in Service Registry but I still cant see in the search in field the option "Service Registry". I´ve configured the destination type Service Registry to my physical system (destionation template management) but I still have the problem. I used this guides:
       /people/rudolf.held/blog/2007/10/18/browsing-the-services-registry-of-es-workplace-in-visual-composer
       http://help.sap.com/saphelp_nwce711/helpdata/en/48/0c886211e525cde10000000a42189c/frameset.htmI
    I have SAP EHP1 for SAP NWCE 7.1
    Thanks in advance
    SU

    Hello,
      I changed my configuration following this tutorial,
       http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4094345f-341f-2b10-86a0-86a6309f1a0b
         In the tutorial, there is no need for creating a service registry of type ABAP, it used JAVA pointing to the local service registry (where its suppose to be all the services of the company). So I did this, and the Service Registry appears in my search in field of the Visual Composer. But, when I try to search something, it shows me "Search returned no results". I dont know if I have missed some step. when I search in http://localhost:port/sr, I find all my services. It seems the service registry its not linked at all.
    Thanks
    Regards
    SU
    Edited by: soauniverse on Jan 11, 2010 8:55 PM

  • Error while testing the endpoints in Service Registry

    Hi,
    I am getting the following error while testing the endpoint in the Service Registry
    Invalid Response Code: (404) Not Found. The request URL was:"http://<server>:8000/sap/bc/srt/wsdl/bndg_DD73518A3AD471F18558001D0910D3CA/wsdl11/binding/ws_policy/document?sap-client=800". Check, whether the URL is correct, and the Web Service that you are requesting is up and running.
    I have created an Enterprise Service at the backend and have published to the Service Registry of the CE server , but while testing the endpoint in service registry i am getting error.
    Can any one please help me to solve this issue.
    Thanks & Regards,
    Hamsa Shree

    Hi hamsa,
    Have you tested the service? If It works, maybe there's something wrong with your destination configuration.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/705459a3-bf1c-2b10-8a9d-d300ada5f0fc
    You may find a solution in the above article.
    Good luck!
    Wenhao

  • Regd.UDDI server configuration in PI 7.1 and services registry

    Hi ,
    i have gone through many forum posts before posting this , so expecting a genuine answer:) which can be rewarded:).
    I am using PI 7.1 and trying  to taste the services registry flavour of it.
    i followed the SAP Note 1267817 - Configure Services Registry proxy , but i am not able to assign the roles
    SERVICES_REGISTRY_READ_ONLY or SERVICES_REGISTRY_READ_WRITE in Su01.
    i get a message that such a role doesnt exist at all.
    Qn1:Do i need  installed any software componet like UDDI etc, or do in  need to have uddi server
    configured for this , if yes how to do that..
    I have seen the help.sap link : I am struck at the point "Discovery URL host name", according to the help.sap it will come automatically , but in my case it has some Rivalry.
    Qn2:How to configure UDDI server n PI 7.1
    , any step by step guide which applies to PI 7.1 will help.
    Qn3:What is the relation between tcode soamanager, services registry and UDDI
    Qn4: I am not able to search my services in soamanager->business administration->WS administration
    I have activated the services (Webservice Runtime)as mentioned in the Blog
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/d06b6392-cde7-2c10-8f8b-bdea5d781dd9

    Thanks Raj,
    This property specifies a URL for the host name of the *physical machine where the Discovery
    API of the UDDI server is located.* Its value is set automatically by default.
    I am not able to understand this present in [help.sap |http://help.sap.com/saphelp_nwpi71/helpdata/en/45/c1ea61a1194432e10000000a155369/frameset.htm]
    what may be  the reason for   not able to assign the above roles as per the sap note given above?
    Is there any componet needs to be installed line UDDI?Can a technical user role have this roles
    accepted,i used my ID for configuration XI super user!
    After following the note partially i.e w/o giving the user roles. when in rt click sender agreement and say publish
    it slaps me with this error
    Com.sap.aii.ib.core.uddi.RegistryCleintException:
    A save request exceeded the quantity limits u2026Number of Business Entries Exceeds Your limit of 1(2)
    But if i open Services registry  i can see that service got published.when i test in WS navigatore it
    gives 503 service unavailable error.
    How to delete unused published services
    . Initialy i took the wsdl URL generated from
    disply WSDL and published using publish tab in Services Registry , they dont have any key associated.
    How to delete them?I can see any direct option
    Regards,
    Abhi

  • JDeveloper 11.1.1.5.0 ADF Library task-flow not shown

    fyi
    Please consider the example application created using JDeveloper 11.1.1.5.0
    at http://www.consideringred.com/files/oracle/2011/TestsInADFLibraryApp-v0.01.zip
    (in the context of forum thread "JUnit test classes in ADF Library")
    At some point, working with that application in JDeveloper 11.1.1.5.0, I used the deployment profile "adflibTestsInADFLibraryApp-ViewController-dp" to create the ADF Library "adflibTestsInADFLibraryApp-ViewController.jar" wich seemed to have an issue.
    When in a File System Connection on the Resource Palette, that ADF Library did not show the task-flow(s) it contained.
    But, I can no longer reproduce this. If I now try to do the same, the ADF Library seems to be OK. The only thing I can think of that changed, is that JDeveloper has been restarted (a day later).
    Showing both ADF Libraries in File System Connections on the Resource Palette illustrates this
    at http://www.consideringred.com/files/oracle/img/2011/task-flow-not-shown-jdev111150.png
    When I looked inside the ADF Libraries, the respective "task-flow-registry.xml" files were somewhat different:
    - in the "broken" ADF Library there were lots of XML namespace declarations
    <?xml version="1.0" encoding="UTF-8" standalone="no"?>
    <task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
    <task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="WEB-INF/btf/browse-employees-btf.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="browse-employees-btf" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="task-flow-definition" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="true" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
    <task-flow-descriptor xmlns:ns0="http://xmlns.oracle.com/adf/controller/rc" ns0:path="META-INF/adfc-config.xml" xmlns:ns1="http://xmlns.oracle.com/adf/controller/rc" ns1:id="" xmlns:ns2="http://xmlns.oracle.com/adf/controller/rc" ns2:type="" xmlns:ns3="http://xmlns.oracle.com/adf/controller/rc" ns3:uses-page-fragments="false" xmlns:ns4="http://xmlns.oracle.com/adf/controller/rc" ns4:library-internal="false" xmlns:ns5="http://xmlns.oracle.com/adf/controller/rc" ns5:train="false"/>
    </task-flow-registry>- in the "ok" ADF Library there was only one XML namespace declaration
    <?xml version = '1.0' encoding = 'UTF-8'?>
    <task-flow-registry xmlns="http://xmlns.oracle.com/adf/controller/rc">
       <task-flow-descriptor path="WEB-INF/btf/browse-employees-btf.xml" id="browse-employees-btf" type="task-flow-definition" uses-page-fragments="true" library-internal="false" train="false"/>
       <task-flow-descriptor path="META-INF/adfc-config.xml" id="" type="" uses-page-fragments="false" library-internal="false" train="false"/>
    </task-flow-registry>- (q1) How can these not shown task-flows (or its different task-flow-registry.xml file) be explained?
    many thanks
    Jan Vervecken

    Thanks for your reply Chris.
    Chris Muir wrote:
    a) When you say you've "used the deployment profile" I'm guessing you mean within JDeveloper and not via ojdeploy? ...That is correct.
    ... it seems you're doing the ADF Library generation inside JDev, not via ojdeploy via Ant correct? ...That is correct.
    ... (For reference the bug numbers are 10028879, 10028816, 913159). ...On My Oracle Support I have found:
    - bug 10028879, "OJDEPLOY FAILS TO COMPILE/GENERATE TASK-FLOW-REGISTRY.XML WHEN ${USER.DIR} USED" (having "Base Bug 10076058" which does not seem to be published)
    - bug 10028816, "OJDEPLOY FAILS TO GENERATE TASK-FLOW-REGISTRY.XML FOR CASE-INSENSITIVE WIN PATH" (and a patch)
    - for number 913159 I got "No results found" (which might be an unpublished bug, or a wrong number)
    ... by that stage I was sick of logging bugs against ojdeploy. ...Really, where did it hurt. ;-) ... logging bugs should not be a problem ...
    b) Regards the File System Connection in the Resource Palette, are you using an UNC mapping? ...No UNC mapping, just the local file system.
    ... The relating bug numbers are 9340973 and 12940696. ...On My Oracle Support I have found:
    - bug 9340973, "RESOURCE PALETTE FAILURE ON USING NETWORK PATHED FILE CONNECTIONS" (having "Base Bug 12940696" which does not seem to be published)
    - for number 12940696 I got "No results found" (which might be an unpublished bug, or a wrong number)
    So, about "I don't think these are related but let's rule them out", I think those are ruled out.
    regards
    Jan

  • Services Registry Search Returns 0 Results

    I'm following the 3 part walkthrough on CE 7.2 and one step is using VC to connect the CreatePurchaseRequest to a backend web service.
    I've exposed the service in ECC, setup the endpoint/service on the Java side for that server, and then published it to the NW CE server. The publish steps return
    "Successfully published service definition with key : "uddi:05c3d3ee-f4e4-11df-cab0-0000001b0b3e" " indicating the server sees and has configured it.
    However, when searching for the service in VC on my dev system, it keeps returning 0 results in the search. I've looked at documentation for hours and can't find the fix - this seems to span many areas of NW. Can anyone advise of where to look or something else to test on the system/client?
    NW WS Navigator can see the endpoint, and I can see the published WS in the NW CE Server. It does have an issue withe a FQDN but other than that tests OK from both systems' WS Nav. Only the NWDS 7.2 SP3 seems to not see it in the Service Repository.
    I have confirmed the same results on a XP SP2 client system, and that I can get the default WS's from the CE server but nothing else.  The search also shows my ECC server as a search option through the CE server. 
    Can anyone shed light on this one? 
    Thanks
    System info:
    ECC 6.0 EHP4
    NW CE 7.2 Win 2008 32 bit running on XP Mode for NWDS
    VC 7.2 SP3

    hi
    check your configuration settings,whether you are connecting to service registry from visual composer or not.
    as you are saying you have published the web service so service registry will show the service when you are connected to it
    Hope it may help
    You can check this link for step by step tutorial.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0f78144-fb79-2d10-f986-97347155ec23
    check all 4 parts for complete reference and process driven visual composer application.
    best regards
    suresh

  • What is the role of OSR (Oracle service registry) in CRMOD-EBS PIP

    Hello All,
    We are installing the PIP Oracle Lead to Order Integration Pack for Oracle CRM On Demand and E-Business Suite 2.5.
    As per the implementation guide, seems Oracle Service Registry (OSR) 10.3.0.0 is an optional component.
    Curious to know what role this OSR would play in this integration. If I skip the installtion of OSR, does it has any impact anywhere else.
    Thanks
    Saikrishna

    Hi Prem,
    Thanks for the reply..
    I read in the installation document that the PIP publishes its components to BSR (Business Service Repository) instead:
    Note: You can choose to skip this screen if you do not want to give UDDI details. When you skip Oracle Service Registry Details, the services do not get published on the Oracle Service registry. The objects do not reference the registry because the installation did not publish them. However, Foundation Pack and PIP content is published to Business Service Repository (BSR). Check Publishing Foundation Pack and PIP Content section for more information.
    I have already skipped the OSR started with PIP installation. Can we install the OSR later time after PIP installation.
    Thanks
    Saikrishna

  • RFC WSDL need to publish in Service Registry or not?

    Hi,
    I have created a webservice(WSDL) using SOAMANAGER for Remote Function Call(RFC) developed in R/3 System. This WSDL will be used in Enterprise Portal for our Web Application. Is it required to publish the Webservice in Service Registry? What is the importance of publishing webservice in Registry? If it is required, who will be responsible for publishing it(ABAP Technical person or Basis or Enterprise Portal person)?
    Thanks and Regards,
    Vimala P

    Hi Nidhi,
    >My Scenario is I need to publish one RFC as a webservice in PI 7.1 and provide an endpoint URL to user to use.
    As per my understanding, you are trying to expose an RFC as webservice. If yes, have a look at this [link|http://help.sap.com/saphelp_nw04/Helpdata/EN/e9/ae1b9a5d2cef4ea4b579f19d902871/frameset.htm] to ensure you have done it properly.
    > I have done the configuration but when I try this option Tools-> display WSDL it gives me following error-- ``Object Service Interface Z_QMNC_SAVE_CORRECTIONS | urn:sap-com:document:sap:rfc:functions not found in Enterprise Services Repository``
    I am not clear with configuration you have done. Can you describe a bit more?
    Regards,
    Sunil Chandra

  • ABAP WebDynPro User Interface Elements not shown on layout while designing

    Hi,
    When I create a new custom ABAP WedDynpro, the UI Element library is not shown on the view layout.
    I have tried a lot of options in exploring this.
    Kindly help me
    Thanks
    Sai.

    Have you followed the instructions in the online help:
    For the layout editor in the View Designer, all the services specified in Active Services in SICF for Web Dynpro ABAP must be activated. More information: SAP Notes 1009930 and 1008689
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/d28dfa34bb12bee10000000a1553f7/frameset.htm
    The view designer is a web application itself and your system must be properly setup for web access for this to work.  Also look at your Fully Qualified Domain Name setup:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
    Although a nice feature, the view deisgner is not required for building Web Dynpro Applications.  You can do 100% of the activities with the view designer turned off by working with the UI element tree on the right side of the page.  You can right mouse click and use the context menu to access most functions.  I'm sure that you want to get the view designer working, but until then you can still function.

  • Not able to access 'Service Registry' in VC 7.1

    Hi Swapnil
    You can try out the following steps mentioned in this blog.
    /people/robin.schroeder/blog/2007/08/08/publish-your-services-to-es-registry
    Regards
    Deepak

    Thanks a lot Guys , for all the hints.
    I was working on all these hints from last few days... but something's going wrong somewhere that I am not able to figure out, though I have tried all the ways suggested...
    I did the destinations once again exactly as shown in PDF and in Flash demos. I have SR3 installed and so on...
    But still I get same error when I try to search in "Service Registry"- "Could not load classifications from UDDI Server. Please change the uddi server."
    I think i should focus on some different tasks now.
    But hey, I did access Enterprise Services by a different way, just like old days, creating a HU2_800_METADATA (WSIL) destination and accessing the service ..
    Thanks for all the help...
    With Best Regards,
    Swapnill
    {I have kept the question still unanswered! Lets see, as they say- never lose hope...}

  • Provider system on service registry

    Hello experts,
    I am facing an issue when i try to configure a provider system for Service registry.
    I get an error "Specified provider system is not published in the Services Registry."
    Please let me know as how to configure a provider system on service registry.
    Regards,
    Vivek

    Hi Vivek,
    Refer to guide below from around page 16, it will help you:
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-process-management/business-process-modeling/creating%20bpm%20process%20with%20human%20and%20automated%20activities.pdf]
    Regards, Trevor

  • Service Registry XSD dynamic reference not working

    Hi ,
    I have published an employee canonical schema to service registry. I have referenced it in my BPEL in my wsdl file as follows
    <schema xmlns="http://www.w3.org/2001/XMLSchema">
                   <import namespace="http://systinet.com/uddi/demo/employeeList" schemaLocation="employees.xsd" id="uddi:company:HR:EmployeeCanonical" />
              </schema>
    I have deployed the BPEL and is working fine. When I updated the service registry to point to the lastest version of canonical file , the BPEL is not reflecting to the new version. I have bounced both bpel server and reg. service but still no difference.
    please let me know how I can dynamically reference the xsd in service registry.
    appreciate your help.
    thanks
    Srini

    Hi
    I am having trouble making the BPEL and Systinet to work together. I have Systinet and BPEL installed separately on 2 different servers. I deployed my web services and registered them in UDDI. I created a new BPEL process and added a partner link to refer to one of the web service I have registered in UDDI. When I create the partner link, it is forcing me to give the wsdl and it also gives an error message " There are no partner link types defined in current wsdl. Do you want create that will by default create partner link type for you?". If I say "NO' then deployment fails. If I say "Yes", then it creates a new wsdl file on the local server etc and gives "<Faulthttp://schemas.xmlsoap.org/soap/envelope/>
    <faultcode>soapenv:Server.userException</faultcode>
    <faultstring>com.oracle.bpel.client.delivery.ReceiveTimeOutException: Waiting for response has timed out. The conversation id is 75164a0815ea471a:-3be8c246:117cc377894:-537b. Please check the process instance for detail.</faultstring>". Any help is appreciated.

Maybe you are looking for

  • How do i configure my lion server to update my other workstations

    I have a brand new Mac OS X Lion server. How do I go about setting up my Lion server to download updates for my other workstations (about 30). These workstations are mixed with Macbook Pros using 10.6 as well as some using 10.7, iMac's using 10.6 and

  • IMesh opens in new tab.

    I've tried about:config imesh->reset and keyword.URL change the input. but it doesn't work. I even added an addon that says it will open any website in my new tabs......no luck.

  • ADF BC : Polymorphic View Link

    hi If I generate Business Components from Tables for EMP and DEPT in the SCOTT schema, I get an Association "FkDeptnoAssoc" and a View Link "FkDeptnoLink" based on this Association. This allows me to select "EmpView via FkDeptnoLink" in the Data Mode

  • Is hp deskjet 940c compatible with windows 7

    is hp deskjet 940c printer compatible with windows 7 ? and can adaptor be used from 25 pin printer connection to usb computer connection ? This question was solved. View Solution.

  • Please help: Flash problem in IE9 in Vista

    I am hoping to get some help with Flash and IE9 on Vista. It had been working fine, but now I only get a grey screen where the video should play. Flash does, however, play in Safari and Chrome. I have uninstalled flash (using Adode's uninstaller) and