Services for a New Object

Helo community:
We have created a new object ("8C - job family") , this object is a copy of object "C" job, we have done the customizing, for example in table: T778O and we have filled it with:
8C Familia de Funciones PDOTYPE_C ICON_ISO_CODE
So, the question is when we create a new object in PP01, we want to create an attachment, but the options are disabled. Somebody knows how we should enabled these options?.
Thanks in advance,
Fabiaa

Microsoft confirmed I have figured out the answer if you are having
an issue when your nested cluster breaks when you move your VM guest to the other host...(Below)
A nested cluster heartbeat network has to be setup...
Meaning not only does the nested HB have to communicate between its nodes (classic HB situation), but the HB also has to communicate to each host or communication is lost.
how to:
Present a physical nic to both hosts
Create a new virtual switch for both hosts pointing to the new nics (this will create virtual nics to add to your vm guests)
This also creates a virtual nic on both hosts (because the physical nic is being presented to hyperv)
Add nics to both guests in the nested cluster
Set IP's on all four nics (hosts and guests)
Creating a subnetted network between all 4 nics (Ping making sure you can communicate all around)
Now you will be able to fail one member of your nested cluster to the other host without breaking the nested cluster.
Communication between the host which does not own the guest is the key.

Similar Messages

RegisterObjet (for a new object) return a clone form a different object

Hello,
when I register a new object with registerObject method, I sometimes receive an object from the same class but a clone from an other objet.
How is that possible ?
thanks
Annabelle

Hello Annabelle,
When you call registerObject(someObject), TopLink will perform an existence check to see if the object passed in is new or existing, then return a working copy of the object passed in. It the object was previously registered, it will pass the same working copy back, otherwise, it will clone the object passed in to use as the working copy.
Are you using sequencing?
If registerObject is passing back the same working copy for multiple new objects, there might be a problem with the object's primary key - which is used for identity.
Try printing off what is in the identity maps using the session.getIdentityMapAccessor().initializeIdentityMaps() api on the UnitOfWork. This should show all the objects in the cache as well as the primary keys they are cached under, which might help to identify the problem object and how it got in the cache.
Best Regards,
Chris

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

How should i get the delta data for those new object's previous delta data?

Hallo all,
i have 2lis_11_vahdr and i am using a standard and loading delta! now i have appended some new fields in the datasource then in infosource then in ods and infocube..! now how should i get the delta data for those new object's previous delta data???
Jimmy

Hi,
After appending new fields in the datasoure.It is not possible to delta load, u should have to load everything
Thanks,
Shreya

Why do we allocate space for a new object???

When we create a new object, we instantiate it. Why do we do this. I read that we are allocating space for it. What is allocating space and why is it necessary??

Okay, say you have an object called Stick, which descibes a physical stick's characteristics:
class Stick
     private int length;
     Stick()
          //unparameterized constructor
          length = 1;
     Stick(int l)
          //parameterized constructor
          length = l;
     public int getLength()
          return length;
Pretty basic, right? Okay, looking at this code, you might say "well this is a class, not an object because it describes something, it's not an actual instance of the class". Right. So what people do is they instantiate things like Stick() into a static class (such as main) like so:
class Thingy
     public static void main(String args[])
          Stick s1 = new Stick();          //calls the unparameterized constructor
          Stick s2 = new Stick(4);     //calls the parameterized constructor
          System.out.println("Stick 1's length is "+s1.getLength());
          System.out.println("Stick 2's length is "+s2.getLength());
The unparameterized constructor line creates an instance (which is the same thing as an object) of class Stick using no parameters. The parameterized does the same, only it uses a length of 4 instead of the default 1 that the other constructor uses. The two instances s1 and s2 use the same class template, and can call the same methods, such as getLength(), but they contain different information in their data fields, for example "length" in class Stick. And that's how constructors work, and why they're useful. They're all about deriving a useful instance from either limited or abundant information.

Find My iPhone service for Auckland, New Zealand

Hi,
I was wondering if there is any Apple iPhone user from Auckland, New Zealand? I mean I got some serious question for Find My iPhone service on MobileMe.
The thing is when I inserted Vodafone NZ SIM, the Find my iPhone shows me closer to my location but not accurate, when I actually inserted 2Degrees it shows me way North of my current location approx more than 5KM away and Google Maps the current location is way wrong, it's an urban area anyway. The thing is it actually works really well in Auckland city, so if you lost you phone in an urban area you might as well tries to forget it?
All and all, does Find My iPhone service relies on Telco service?

0_o What about TomTom App compared to TomTom GPS Device? Do they rely on Cell Towers too? I'm sorry this is off topic but TomTom App sure look like a nice addon for my app.
Car navigation apps use only GPS. They have to work in areas with no cell phone coverage. It takes longer to get the initial location, but the GPS is left on, since they are normally getting power from the car. The iPhone's built-in map app just turns on GPS when needed, to save power, so faster startup is important.
And back on topic, let's said if I lost my iPhone and since the signal location is not accurate do I actually lose my iPhone for good?
You can end a message and sound to it, so someone might find and return it. It won't help in the case of a thief, of course.
And since this is no good to me I wonder if MobileMe service is really worth it at all.
It's not worth it for just the Find My iPhone function (unless you frequently misplace things), but if you have a Mac, it's other functions can be worth the cost.

Do I need to uninstall apps when getting service for a new hard drive?

My second (home) computer is part of Apple's defective hard drive recall. Do I need to uninstall my creative cloud apps before I take it in to get the new hard drive, or will they just get wiped and then can I install again when it comes back with the totally new hard drive?

Launch one of the installed applications, for example Photoshop and from the Help menu choose Deactivate. This will deactivate all of the applications installed via Creative Cloud.

String contains class name: how to use it for creating new objects

Hi All
I've seen things like this in scripting languages, so I was wondering if things like this are possible in java. Here is an not working example:
String s = "MyClass" ;
MyClass mc = new s() ; // or: s mc = new s() ;
if ( mc instanceof s ) { ..... }
Is something like this possible ?
Thnx in advance
LuCa

jeanluca wrote:
I've seen things like this in scripting languages, so I was wondering if things like this are possible in java. Here is an not working example:
Is something like this possible ?AFAIK, it is only possible in a very limited way as noted above and is nearly always not recommended and definitely not necessary. The variable name has little importance, but OTOH the object reference has great importance. Instead learn about arrays, Lists, and Maps.

To whom must i complain about after sales service for my new i phone

My new i phone 5 bought in November 2013 shows patches on the screen and all functions are disabled, I was dialling when it started, first there were no response of the key board then I could not switch it off, after a while an oval green patch apeared on the screen, later it turned violet and finally a black spot took place on the RHS of the screen, I went to see the dealer (Mauritius Telecom) who told me that the screen was not covered by a warranty. I red the leaflet throughout and I could not find such clause, I told this to the dealer and he changed his version and told me that my phone has surely had an accident. It is a very stressing situation, they are claiming me Rs.10,000.- (400 $ + -) to change the screen. Can you please advise me concerning this issue?
Jean.

No-one here can give you formal advice, only Apple can do that. All the same, your experience does not seem to meet what I, for example, would accept. As I understand the warranty, all parts of the iPhone are covered if the problem is a manufacturing defect. But that is the key to the matter. If you have dropped it or splashed it with water, such damage would not be covered.
Contact Apple support with your story. Tell them the store name and address (I trust you bought it from an authorised seller). Hopefully that will get the matter resolved.
Apple - Support Select Your Country & Language

Bad Quality of Service for a new customer

I am very disappointed in my experience today.

Many thanks guys for professional Input!
My question based on following problem:
At SXMB_MONI all PO messages succssfully processed but no messages deliverd to the Vendor.
After deeper checks i detected following:
At Component Monitoring I see the respective Communication Channel in yellow with description "Channel started but inactive". So far as i know ... that means ... no messages was processed up to now!
At Message Monitoring i found a lot of PO Messages in Status "To Be Deliverd".
The last entry at Audit Log sounds "The message was successfully retrieved form the queue".
Message restart doesn't work! So i thought on message blocks the whole Adapter queue.
Do you have any solution for me?
Many thanks in advance!
Regards,
Jochen

Cannot view workflow log via Services for Object Workflow Overview

We recently had an upgrade of R3/ECC and discovered a new issue. For some reason we can no longer view workflow log via Services for Object > Workflow Overview for Material Master (transaction MM03). We get the message "There are no workflows that have already worked with this object". However, we have confirmed via SWEL and other t-codes that the workflow and log do exist. This seems to be the only object we have this issue for after the upgrade.
Anyone know what issue is and how to fix?   Or at least path to config in SPRO for "generic object services" where we can see if anything changed via upgrade for this object?
Thanks,
Matt
Edited by: Matthew Huth on Apr 22, 2008 9:23 PM

Found the solution. See OSS note 553246. This has been tested and works for us.   -Matt
Note 553246
Summary
Symptom
In the material master, the system no longer displays the attachments for the material or workflow items in the Generic Object Services.
Other terms
MM01, MM02, MM03
Reason and Prerequisites
As of Release 4.6B, business object BUS1001006 is valid for the material master. Until you have implemented Note 452424, the Generic Object Services is still published for the old BUS1001 business object. After implementing the note, all attachments, relationships, notes and workflow items that are assigned to business object BUS1001 are no longer displayed.
Instead, all new attachments are assigned to business object BUS1001006. As a result, attachments cannot exist for both systems.
For workflow items, the assignment to the business object occurs in the respective tasks. It may be very time consuming to convert the business object, depending on whether an individual subtype (assigned to BUS1001) is created.
In other words, after you implement the note, the workflow items for business object BUS1001 can no longer be displayed in the material master.
Solution
With the following correction you can call the Generic Object Services for both business objects. When it is called, the system displays a dialog box in which you can choose the required business object, that is, BUS1001 ('Material') or BUS1001006 ('Standard material').
This correction is delivered as a modification supported by SAP only. This is because the additional option means that attachments can be maintained as required in either of the business objects and users may therefore require extra training.
However, the corrections enable you to display attachments and workflow items for both business objects without the need for a major conversion; this means that you do not get the impression that these have been lost.
Alternatively, as of Release 4.70 (or Basis 6.20) you can, without making a modification, implement method ADD_OBJECTS of BAdI GOS_MULT_PUBLISH for filter attribute WF_OVERVIEW ('Workflow overview'), SRELATIONS ('Relationships') and VIEW_ATTA ('Attachment list'). The implementation should be similar to the following:
METHOD if_ex_gos_mult_publish~add_objects .
DATA:
    ls_lporb TYPE sibflporb.
READ TABLE ct_lporb INTO ls_lporb INDEX 1.
if ls_lporb-typeid = 'BUS1001006'.
    ls_lporb-typeid = 'BUS1001'.
    append ls_lporb to ct_lporb.
endif.
endmethod.

Add New Object in a DMS Object Link

Hi everybody,
i am trying to create an object link to Service Entry Sheet. (tcode: ML81N, ESSR-LBLNI)
by sap instructions i did this step:
"You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140 .
The processing logic must follow that of screen 1204 in program SAPLVC130."
and this step:
Create function module OBJECT_CHECK_XXXX (XXXX = ESSR ) which i have copied from OBJECT_CHECK_EQUI .
I have done above step .
I created Screen For SAPLCV130 and SAPLCV140 with screen No 1272. give same flow logic of screen 1204.
I created Function Module OBJECT_CHECK_ESSR.
After this What I have to do for displaying ESSR object in DMS as Object Link.
Please Guide me as soon as possible.
Thanks
Pranesh

Hi,
Since I think you already followed the below steps :
1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
Kindly go through the below once :
Link :[http://help.sap.com/erp2005_ehp_02/helpdata/en/2c/3fe93bad3ce333e10000000a114084/frameset.htm].
you define the object link in DMS customizing
e.g.For EBAN maintain screen number 247 in "Maintain view for screens to DMS object links" Then link EBAN to your document type
Hope it helps you.
Thanks
Arbind
Edited by: Arbind Prasad on Feb 24, 2011 5:46 PM

How to Add New Object?

HI,
Any body can say how to add new object. For Example: The Document need to link with Invoice Transaction (T.Code: VF01, Table: VBRK/VBRP).
Points will be rewarded, if information is useful.
Tks
Mani.

Hi
You can create New objects using the T.code: SE80.
You can make an object link to SAP objects that are not shown in the possible entries list. To do this, proceed as follows:
1. In the standard system, there are already two special screens for the module pools SAPLCV130 and SAPLCV140 for the linked SAP object.
You must create two new screens with the same number for the module pools SAPLCV130 and SAPLCV140. The processing logic must follow that of screen 1204 in program SAPLVC130.
2. Create function module OBJECT_CHECK_XXXX (XXXX = object name) If the object can be classified, this function module already exists .
Otherwise copy the function module for linking equipment DOCUMENT_CHECK_EQUI and change it as required for the new object.
Regards
S.Sivakumar
Reward points if useful----

Naming new objects

I'm a newb to Java (and programming in general) and I was wondering if anyone could help.
What I need to make is a bank program that can have an unlimited amount of accounts added to it. Each account is supposed to be an object. The problem i'm having is how to do the unlimited part. I'm creating the objects using the following
BankAccounts account1 = new BankAccount();
But what I need is too be able to change "account1" to "account2" and so on for each new object created. any help?

Instead of changing the name of each object you can add a parameter as account name in the class BankAccount() and every time you create a new object set the name attribute different for that object which can be the loop number...
ArrayList arr = new ArrayList();
for(int i=0;i<anyNumber;i++){
BankAccount account = new BankAccount();
account.name = "account"+i;
arr.add(account);
}In this way when later on you fetch out the objects from the list you can differentiate between each account on the basis of the name property..

Add new function to Services for Object in transaction XD03

Hi expert,
Do you know how to add a new function to the Services for Object appeared at the beginning of the title bar on transaction XD03? I would like to add it to the Create list. Please help, thanks!
Chuong

Hi,
Check this Post, May help you
XD01 ENHANCEMENT
Regards,
Satish

Services for a New Object

Similar Messages

Maybe you are looking for