Services over NAT

Hi,
I am trying to conect two overlaping IP address sites ( see attached diagram). Site A LAN address will dynamic NAT to 10.1.1.0/24 at ASA5520.All the users from site A need to get services from site B ( DHCP, DNS, Mailbox,Print Servers, AD loggin etc). All the connections will be initiating from site A to B.
My question is
1-will all these services will run over NATed address.( dynamic) or I have to change to static NAT?
2- Has anyone running this kind of network and provide sample config for ASA 5520?
Regsrds,

Hi,
I suggest doing NAT on both sites.
For Site A with ASA running 8.4 software the NAT configuration might look something like this
Base Information
Site A LAN: 192.168.1.0/24
Site A LAN NAT: 10.1.1.0/24
Site B LAN (NAT): x.x.x.x/24
Site A LAN interface = inside
Site A WAN interface = outside
Configuration
object network LAN-LOCAL
subnet 192.168.1.0 255.255.255.0
object network LAN-NAT
subnet 10.1.1.0 255.255.255.0
object network REMOTE-LAN
subnet x.x.x.x 255.255.255.0
nat (inside,outside) source static LAN-LOCAL LAN-NAT destination static REMOTE-LAN REMOTE-LAN
What the above configuration will do is
Do NAT between interfaces "inside" and "outside"
When Site A users connect from their LAN-LOCAL to REMOTE-LAN their NAT IP address will be LAN-NAT This works both ways. When Site B REMOTE-LAN connect to LAN-NAT they will reach LAN-LOCAL of Site A
Also notice that since you are using this type of NAT that every LOCAL and NAT address will match eachother regarding the last portion of the IP address
192.168.1.1 = 10.1.1.1
192.168.1.2 = 10.1.1.2
192.168.1.3 = 10.1.1.3
etc
As I said before I would suggest you ask the Site B admin to also NAT their local LAN 192.168.1.0/24 to something and then you can use that network range and insert to the above configuration to the place of x.x.x.x.
Please rate if you found the information helpfull
Also ask more if needed
- Jouni

Similar Messages

L2 services over routed network.

Does anyone know what Cisco recommends for multisite L2 lan services over a routed IP network(no MPLS core)? I've been reading about vpls over gre, but after checking Cisco feature navigator, it looks like the ME switches do not do it. Is there another way to accomplish multisite L2 lan services in the ME or do you have to use 6500 or 6800 series?

Hi,
I suggest doing NAT on both sites.
For Site A with ASA running 8.4 software the NAT configuration might look something like this
Base Information
Site A LAN: 192.168.1.0/24
Site A LAN NAT: 10.1.1.0/24
Site B LAN (NAT): x.x.x.x/24
Site A LAN interface = inside
Site A WAN interface = outside
Configuration
object network LAN-LOCAL
subnet 192.168.1.0 255.255.255.0
object network LAN-NAT
subnet 10.1.1.0 255.255.255.0
object network REMOTE-LAN
subnet x.x.x.x 255.255.255.0
nat (inside,outside) source static LAN-LOCAL LAN-NAT destination static REMOTE-LAN REMOTE-LAN
What the above configuration will do is
Do NAT between interfaces "inside" and "outside"
When Site A users connect from their LAN-LOCAL to REMOTE-LAN their NAT IP address will be LAN-NAT This works both ways. When Site B REMOTE-LAN connect to LAN-NAT they will reach LAN-LOCAL of Site A
Also notice that since you are using this type of NAT that every LOCAL and NAT address will match eachother regarding the last portion of the IP address
192.168.1.1 = 10.1.1.1
192.168.1.2 = 10.1.1.2
192.168.1.3 = 10.1.1.3
etc
As I said before I would suggest you ask the Site B admin to also NAT their local LAN 192.168.1.0/24 to something and then you can use that network range and insert to the above configuration to the place of x.x.x.x.
Please rate if you found the information helpfull
Also ask more if needed
- Jouni

Publish of a Service over Service Registry - com.sap.esi.uddi.sr.api.exce

Hello
I try to publish a Service over the Service Registry UI but this results in a com.sap.esi.uddi.sr.api.exceptions.SRExceptionerror code: null detail message: java.lang.NullPointerException->java.lang.NullPointerException
Is the problem the schema import or the two address locations ?
We use ESR CE 7.1 SP3
Kind regards
Gerald Eder
The WSDL looks like :
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://test.com/soa/" xmlns:i0="http://test.com/soa" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://test.com/soa/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:import namespace="http://test.com/soa" location="http://pwwdev.test.com/Appl/Corp/Services/SOA/SOAServer/customerid.asmx?wsdl=wsdl1" />
- <wsdl:types>
- <s:schema targetNamespace="http://test.com/soa/">
<s:import schemaLocation="http://pwwdev.test.com/Appl/Corp/Services/SOA/SOAServer/customerid.asmx?schema=schema1" namespace="http://test.com/soa" />
</s:schema>
</wsdl:types>
- <wsdl:service name="CustomerID">
- <wsdl:port name="CustomerIDBinding" binding="i0:CustomerIDBinding">
<soap:address location="http://pwwdev.test.com/Appl/Corp/Services/SOA/SOAServer/customerid.asmx" />
</wsdl:port>
- <wsdl:port name="CustomerIDBinding1" binding="i0:CustomerIDBinding1">
<soap12:address location="http://pwwdev.test.com/Appl/Corp/Services/SOA/SOAServer/customerid.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:de

Hi Rajesh,
Many thanks for your prompt reply, however this note 1267817 was already applied before posting message.
B/W I have observed that in spite of the error the service published multiple times in the registry (perhaps each try to publish resulted a entry in SR).
Really crazy error, any other suggestion??
Regards, Immy.

BAD_CERTIFICATE error calling a web service over SSL in ALSB 2.6

We have a business service on an ALSB 2.6 server (running on WL 9.2.1) that connects to a web service over SSL. When we try to run it, we get the following exception:
<Sep 17, 2009 7:49:17 AM PDT> <Error> <ALSB Kernel> <BEA-380001> <Exception on TransportManagerImpl.sendMessageToService, com.bea.
wli.sb.transports.TransportException: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.
com.bea.wli.sb.transports.TransportException: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.
at com.bea.wli.sb.transports.TransportException.newInstance(TransportException.java:146)
at com.bea.wli.sb.transports.http.HttpOutboundMessageContext.send(HttpOu
tboundMessageContext.java:310)
at com.bea.wli.sb.transports.http.HttpsTransportProvider.sendMessageAsync(HttpsTransportProvider.java:435)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
Truncated. see log file for complete stacktrace
javax.net.ssl.SSLKeyException: FATAL Alert:BAD_CERTIFICATE - A corrupt or unuseable certificate was received.
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireException(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
Truncated. see log file for complete stacktrace
This exception only occurs when hitting the web service through the bus. I have written a standalone Java application that posts to the web service and it works fine. I ran the application on the server where the ALSB is running using the same jdk (1.5.0_06 - the version that ships with 9.2.1) and the same cacerts file so I know it's not a problem with the certificate not being trusted. I have tried updating the cacerts file to the latest one distributed with JRE 1.6 and it still doesn't work.
After 8 hours of troubleshooting, I'm out of ideas. Does anyone have any suggestiosn?
Thanks.
Matt
Edited by: user6946981 on Sep 17, 2009 7:58 AM

Are you sure that your standalone application is using the same keystore (eg. cacert)? Default WebLogic configuration uses different keystore (demo).
I saw BAD_CERTIFICATE error only once and the cause was in keytool that somehow corrupted certificate during import. Deleting and importing certificate again helped me, but I doubt you have the same problem as your standalone application works.
Another idea ... Is hostname varification used? I know that the error message would look different if this was the cause, but try to add this parameter to your weblogic startup script: -Dweblogic.security.SSL.ignoreHostnameVerification=true
Last but not least, there is difference between your standalone application and ALSB runtime as WebLogic uses Certicom SSL provider. If you don't find the reason, contact Oracle support. Maybe they can help you to tweak Certicom provider in some way.

ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http

I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
Ravi

Duplicate post ... please ignore.

Web service client behind a proxy server connecting to web service over SSL

Hi Friends,
A web service is exposed by an external system over SSL. We are behind a proxy server and are trying to get connected to web service over SSL. 
We are getting the following error on the test browser of workshop
External Service Failure: FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters.
the whole trace is 
JDIProxy attached
<Sep 24, 2005 9:27:25 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl:salesExpertServiceControl; Method=creditcheckcontr
ol.SalesExpertServiceControl.doCreditVerification(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=creditCheckCtrl; Method=creditcheckcontrol.CreditCheck.testCreditC
heck(); Failure=com.bea.control.ServiceControlException: SERVICE FAULT:
Code:javax.net.ssl.SSLHandshakeException
String:FATAL Alert:HANDSHAKE_FAILURE - The handshake handler was unable to negotiate an acceptable set of security parameters
Detail:
END SERVICE FAULT [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Warning> <WLW> <000000> <Id=top-level; Method=processes.CreditCheck_wf.$__clientRequest(); Fai
lure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled process exception [ServiceException]>
<Sep 24, 2005 9:27:26 AM EDT> <Error> <WLW> <000000> <Failure=com.bea.wli.bpm.runtime.UnhandledProcessException: Unhandled pr
ocess exception [ServiceException]>
I am not able to make out what could be possibly wrong. Please let me know if you guys have any ideas about how to resolve it.
Thanks
Sridhar

did you resolve this problem. I am looking at the same issue. If you did I would really appreciate your response.
Thanks.

Web Service over SSL exception

Hi,
Using NetBeans 6.5 (updated), I have created a web service like this:
package test.webservice;
import javax.jws.WebMethod;
import javax.jws.WebParam;
import javax.jws.WebService;
import javax.ejb.Stateless;
@WebService()
@Stateless()
public class TestWebService {
    @WebMethod(operationName = "testOperation")
    public String testOperation(@WebParam(name = "firstParameter") String firstParameter) {
        //TODO write your implementation code here:
        return "This method has executed " + (firstParameter == null ? "no strings attached." : firstParameter);
}I've deployed and tested it on a local Glassfish server. Some additional information:
- Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs)
- jdk1.6.0_13
It worked fine when accessing it through 'http://localhost:8080/TestWebServiceService/TestWebService?Tester', however, when accessing it through the SSL port (using this link: 'https://localhost:8181/TestWebServiceService/TestWebService?Tester'), it has produced an exception with the following stack trace:
Exceptions details : null
java.lang.NullPointerException at java.io.File.(File.java:222) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.initializePort(WebServiceTesterServlet.java:524) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.doGet(WebServiceTesterServlet.java:184) at com.sun.enterprise.webservice.monitoring.WebServiceTesterServlet.invoke(WebServiceTesterServlet.java:119) at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServiceServlet.java:142) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.java:114) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:87) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:222) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1096) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:166) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:648) at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:593) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:587) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:1096) at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:288) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.invokeAdapter(DefaultProcessorTask.java:647) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.doProcess(DefaultProcessorTask.java:579) at com.sun.enterprise.web.connector.grizzly.DefaultProcessorTask.process(DefaultProcessorTask.java:831) at com.sun.enterprise.web.connector.grizzly.DefaultReadTask.executeProcessorTask(DefaultReadTask.java:341) at com.sun.enterprise.web.connector.grizzly.ssl.SSLReadTask.process(SSLReadTask.java:440) at com.sun.enterprise.web.connector.grizzly.ssl.SSLReadTask.doTask(SSLReadTask.java:228) at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:265) at com.sun.enterprise.web.connector.grizzly.ssl.SSLWorkerThread.run(SSLWorkerThread.java:106)
Question 1: Why isn't the tester working when using the SSL port? A reason or a bug (possibly fixed in later releases)?
Question 2: Will the Web Service itself also not work when invoked through the SSL port? Is it possible to invoke a simple web service over the simple SSL port?
Question 3: When accessing the WSDL description through the SSL port it produces a blank (empty) response - a blank page. Why so?
Thank you very much in advance!
Best regards
Matej

Hello,
I used this example, when I made my experiments with SSL and Glassfish (GF):
http://java.sun.com/developer/EJTechTips/2006/tt0527.html#1
If you have problems with GF I suggest to post a message here:
http://forums.java.net/jive/forum.jspa?forumID=56
e.g. here is one thread:
http://forums.java.net/jive/thread.jspa?threadID=59993&tstart=0
Miro.

Web Service over SSL failing in BEA Workshop

I have deployed a web service on weblogic 9.2
I have enabled one-way ssl on it. got a trial ssl certificate from verisign. installed them on the keystore/truststore on the server as well as the jre (cacerts and jssecacerts truststores) being used by the client. the client is on different machine than the server.
i have developed the service through 'bea weblogic workshop 9.2' now when i try to test the service through the 'web services explorer' within bea weblogic workshop i receive the following error:
IWAB0135E An unexpected error has occurred.
IOException
sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
on server:
<Jul 13, 2009 6:45:44 PM EDT> <Warning> <Security> <BEA-090485> <CERTIFICATE_UNKNOWN alert was received from yunus.l1id.local - 10.10.2.72. The peer has an unspecified issue with the certificate. SSL debug tracing should be enabled on the peer to determine what the issue is.>
if i try to access the web service (over ssl) through the browser (ie/firefox), it works fine. i have generated a proxy class to access this web service through the same bea workshop and that works fine too. certificates are identified and all. i also created a small .net (c#) application that calls this secure web service over ssl from another machine and it works fine too!
of course non-secure url for the web service is working fine in every case.
what can be the reason for this failing only in 'web services explorer' in bea workshop?
cross posted at: http://www.coderanch.com/t/453879/Web-Services/java/Web-Service-over-SSL-failing
thanks.

Hello,
I used this example, when I made my experiments with SSL and Glassfish (GF):
http://java.sun.com/developer/EJTechTips/2006/tt0527.html#1
If you have problems with GF I suggest to post a message here:
http://forums.java.net/jive/forum.jspa?forumID=56
e.g. here is one thread:
http://forums.java.net/jive/thread.jspa?threadID=59993&tstart=0
Miro.

Device is connected to to a wifi network but does not have access to Blackberry services over wifi connection

please help me, my blackberry curve has been working perfectly fine (everything network and wifi connection are working great) since i got it but all of the sudden when i connect to our wifi at home i noticed that the wifi logo on the upper screen is grayed out. i checked the manual and it says: device is connected to to a wifi network but does not have access to Blackberry services over wifi connection. i dont know what to do, i tried the hard reset (removed batt for 1 min while phone is on and put it back in) i also tried to remove the wifi profile and added it back up but still nothing seems to work, my service provider has BB services available on my phone, i can received BBM, pushed email, use FB on my phone using my network but i cant use my wifi to browse.. what should i do? help me please!

With a PC, the Windows Firewall and/or the anti-virus software will sometimes block an attempted Internet connection.
Check both applications to see if you can find a "blocked" item and then take steps to "allow" the connection.
If still no luck, temporarily disable the wireless security for a short period to see if the PC can connect that way. If it can.....then you know it is security related issue.
See if the PC can connect using a setting like WPA-PSK-TKIP. The equivalent Apple setting would be WPA/WPA2 Personal.

Calling a WebSphere Web Service over a Destination

Hi there,
we have installed SAP CE 7.1 SP3 on machine1 and created a destination to another SAP server, called machine2, which we use as web space and save our WSDLs, e.g. machine2:50000/wsdl/MyService.wsdl.
MyService is a small dummy service created with WebSphere Service and works fine. It does not need any security details! This service runs on machine3 and its endpoint is machine3:9060/MyServiceWeb/services/MyServiceSOAP.
So I tried to invoke this service in the WSNavigator on machine1 by entering directly the url. This works.
But if I select the service over the logical destination and then try to invoke it, I get the following error message:
RemoteException: Invalid Response code (404). Server <http://machine2:50000/MyServiceWeb/services/MyServiceSOAP> returned message <Not Found>.
But the correct result is returned, too.
The definition of the destination is as following:
Type: WSDL
Name: MyService
URL: http://machine2:50000/wsdl/MyService.wsdl
System: Java
System Name:
Host Name:
Also a HTTP Authentication is entered with User ID/Password (Basic).
Another interesting point is that I found this error in the log file:
com.sap.engine.services.wssec.srt.protocols.AbstractSecurityProtocol # Authentication method is sapsp:HTTPBasic, but no user or password is specified.
But I can swear that this input is entered. The provided user has administrative rights for machine2.
I hope you can help me!
Thanks,
Felix

Hi Anthony,
If you are using a proper ssl certificate signed by one of the ssl certificate vendors, whose CAs are in the java root keystore, you donot need to do anything special.
However, if you are using a test ssl certificate generated within your organization, you would have to add it to the keystore of the JRE which runs the BPEL engine, otherwise you would usually get an error similar to "java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target". More information on adding the custom certificate to a JRE root keystore can be found in this article.
Hope this helps,
Shanmu.
http://www.prshanmu.com/articles

WebLogic as Windows 2000 service over s shared file system

I am trying to install weblogic as a Windows 2000 service over a
shared file system with no sucess
(the shared fie system is provided by windows 2000 cluster services).
I am using the srvany utility to have the script that launches
weblogic be run as a service (I need this
because I must launch 2 instances of weblogic in the same machine
as services, i cannot do this
with the bea service tools, having different configurations for
the classpath, or can I?)
The service works if weblogic is not installed in a shared file
system.
On the shared file system, it fails (The service fails, is unabble
to start). I also made a script on the local file
system, that calls the weblogic script on the shared file system,
but weblogic fails to start (with no
message) when loading from the weblogic.classpath
thanks for your attenction,
Bruno Antunes
WhatEverSoft - Java Center

I have also tried running the service with the bea tools, with no
sucess when running in
the shared file system.
When i start the service, it seems to start ok, then stops. with
no message.
Nothing is written to the log, any ideas?
Bruno Antunes
WhatEverSoft - Java Center

Error calling external web service over HTTPS

Hi everyone
I'm trying to call an external web service over HTTPS, and continually get the following error:
com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException: Peer sent alert: Alert Fatal: handshake failure
I haven't tried doing this before, so not quite sure where to start. I have a client certificate that must be used to access the remote web service, and I think the problem is associating the client cert with the web service call.
Has anyone else tried this before? Any suggestions of where to look?
I've had a brief look at Key Storage in NWA, but it's not something I'm familiar with - so not sure if it's even the right place to be looking.
Some help on this would be great!
Thanks
Stuart

Thanks Aleksandar
Here's the output from the trace. Unfortunately the SAP forums don't allow attachments, so it may be difficult to read. Please let me know if you see anything that may help.
Thanks
Stuart
Time Severity User Thread Location Message
09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:23:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@fa1b67
09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:24:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@4c8af
09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:24:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@b6981b
09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:25:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:25:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:26:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' are configured '10.|127.|192.168.*'.
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider [com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider] 'nonProxyHosts' default value is '10.|127.|192.168.*'.
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Loadin mapping file from location :[c:/mapping.txt]
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider Additional file for CTS configuration can not be found [c:\mapping.txt (The system cannot find the file specified)].
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider >>>>>>>>> ERROR: Could not find mapping for service QName=vipSoapInterfaceService, class=class com.verisign._2006._08.vipservice.VipSoapInterfaceService
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Creating client instance with WSDL URL [https://pilot-vipservices-auth.verisign.com:443/prov/soap/val/soap] (vipSoapInterfaceService) <com.verisign._2006._08.vipservice.VipSoapInterfaceService>
09:18:26:203 Debug Administrator HTTP Worker [0] ~es.espbase.client.jaxws.cts.CTSProvider com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider: Using SAP JAX-WS Implemetation to create service delegate.
09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:26:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@5586b0
09:18:26:687 Path Administrator HTTP Worker [0] ~s.espbase.wsdl.exceptions.WSDLException Exception : Peer sent alert: Alert Fatal: handshake failure
java.lang.Exception
at com.sap.exception.BaseExceptionInfo.traceAutomatically(BaseExceptionInfo.java:1230)
at com.sap.exception.BaseExceptionInfo.<init>(BaseExceptionInfo.java:147)
at com.sap.exception.BaseException.<init>(BaseException.java:89)
at com.sap.engine.services.webservices.espbase.wsdl.exceptions.WSDLException.<init>(WSDLException.java:34)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:140)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
Caused by: org.w3c.www.protocol.http.HttpException: Peer sent alert: Alert Fatal: handshake failure
iaik.security.ssl.SSLException: Peer sent alert: Alert Fatal: handshake failure
at iaik.security.ssl.r.f(Unknown Source)
at iaik.security.ssl.x.b(Unknown Source)
at iaik.security.ssl.x.a(Unknown Source)
at iaik.security.ssl.r.d(Unknown Source)
at iaik.security.ssl.SSLTransport.startHandshake(Unknown Source)
at iaik.security.ssl.SSLTransport.getOutputStream(Unknown Source)
at iaik.security.ssl.SSLSocket.getOutputStream(Unknown Source)
at org.w3c.www.protocol.http.g.markUsed(Unknown Source)
at org.w3c.www.protocol.http.HttpBasicServer.getConnection(Unknown Source)
at org.w3c.www.protocol.http.HttpBasicServer.runRequest(Unknown Source)
at org.w3c.www.protocol.http.HttpManager.runRequest(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.connect(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.a(Unknown Source)
at org.w3c.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.URL.openStream(URL.java:1007)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:201)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:263)
at com.sap.engine.lib.xml.parser.Parser.parse_DTDValidation(Parser.java:282)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:293)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:146)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.loadDOMDocument(WSDLLoader.java:132)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:91)
at com.sap.engine.services.webservices.espbase.wsdl.WSDLLoader.load(WSDLLoader.java:80)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.loadWSDLDefinitions(SAPServiceDelegate.java:201)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.initWSDL(SAPServiceDelegate.java:159)
at com.sap.engine.services.webservices.espbase.client.jaxws.core.SAPServiceDelegate.<init>(SAPServiceDelegate.java:113)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createDelegate(CTSProvider.java:170)
at com.sap.engine.services.webservices.espbase.client.jaxws.cts.CTSProvider.createServiceDelegate(CTSProvider.java:151)
at javax.xml.ws.Service.<init>(Service.java:57)
at com.verisign._2006._08.vipservice.VipSoapInterfaceService.<init>(VipSoapInterfaceService.java:41)
at JEE_jsp_result_6740550_1225116575421_1225116585468._jspService(JEE_jsp_result_6740550_1225116575421_1225116585468.java:64)
at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:433)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:66)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:32)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:431)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:289)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:376)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:85)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:160)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:67)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:71)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:309)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.run(Processor.java:222)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:152)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:247)
09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:27:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@20ba3c
09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:27:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:28:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@26e3bf
09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:28:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:29:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@f827f6
09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:29:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@a8646a
09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:30:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:30:687 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=com.sap.engine.services.dbpool.cci.CommonConnectionHandle@c449f1
09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out About to get connection from DS
09:18:31:187 Info caf_gp_svcuser Thread[Timer-8,5,ApplicationThreadGroup] System.out DS connection=[email protected]
09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ B E G I N ].timerId=15
09:18:31:593 Info Administrator HTTP Worker [3] System.out SessionImpl::getContext():[ E N D ].timerId=[id:#15, elapsed: 0 ms.]

Create UserName Token Service over SSL

Hi,
How to Create Username token service over SSL in PI 7.1 or XI 7.0
Please help me out.
Regards,
Kevin

Hi,
Check this URL for more clarification:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/405b38d1-9f8b-2a10-e1af-dd187a2ba104
Thanks,
Boopathi

Creating Proxy service over a secured BPEL process

Hi,
I have a BPEL process project A which I have secured using oracle/wss_username_token_service_policy
Now, I want to expose it over OSB as a proxy service.
After registering the WSDL, I tried to create Business Service over it.
It gave me a warning:
[OSB Kernel:398133]WSSP 1.2 policy assertions (Web Services Security Policy 1.2) are not allowed on this service.
What is the best approach to take.
Thanks.

Get the wsdl of the OSB proxy service and create webservice parnerlink in BPEL based on this wsdl to invoke the service
To form the wsdl url, copy the Endpoint URI configured to the proxy service(just click on the proxy service in the console) from the sbconsole - /ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService
Pre append <<protocol://OSB Hostname:OSB Port>> - http://localhost:8000/ and post append with ?WSDL
The final WSDL url look like - http://localhost:8000/ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService?WSDL
Regards
Albin I

Canu00B4t Drag and drop a service over the model Workspace

Hi guys,
I´m trying to consume an Eservice published in the ServiceRegistry. I can see all the services in the result list when i search them, but when i try to drag and drop any of those service over the model workplace nothing happens.
I hope someone can help me to solve this problem.
Thanks in advance,
Regards,
Diego.

Hi
Another thing I'd suggest to do (to better understand what goes wrong) is to make sure the VC console is open.
Please goto View menu and check the 'Console' entry (it should be visible in the bottom of the application)
Once you reproduce your problem the console should show information on errors - please put them here and I'll try to analyze the problem
Guy

Services over NAT

Similar Messages

Maybe you are looking for