Servlet Redirection issue

Hi,
We have an web Application which uploads and Parses Excel File and redirects to an 1.jsp Page. We are facing an issue in redirection after Parsing Large Excel file greater than 15 MB, Tomcat is not able to redirect to 1.jsp. If we upload a Small Execl file, in this case redirection works fine. but we are facing issue with large Excel files. Browser does not show 1.jsp page. We are using RequestDispatcher to forward request to 1.jsp.
Is there any issue with the connection timeout. our application is in tomcat which is beyond Apache. All our request go through Apache.
I missed one more thing. from debugging we found out that tomcat is redirecting properly to 1.jsp but we are not able to see that page in the browser. The Entire process takes around 20 mins. We tried by sending direct request to tomcat on port 8080 bypassing apache in this case it works fine for large Excel files i.e. redirection works fine if we bypass the apache.
Please help.
Thanks.

I tried changing it in Tomcat server.xml and also in apache configurations. Also i tried by setting timeout in jsp page. Timeout was set for 30 minutes.
Nothing worked.

Similar Messages

Guest Anchor - Web Passthrough - Apple device web redirect issue

Hi All,
I've setup a Guest Mobility Anchor at DMZ with 5508 WLC. I've setup the EoIP mobility tunnel and everything works so far.
Now, I was testing multiple clients to connect to the Guest SSID and observed that Apple devices are not redirecting url, resulting unsuccessful connection.
I looked Cisco docs and added the command "config network web-auth captive-bypass enable" on the Anchor as recommended.
Even after executing the command, I'm still facing web redirect issue with Apple Devices. I don't have any issues with other devices, except Apple.
My controller running code AirOS 7.6.130.0. I'm using DMZ controller as DHCP server for Guests and public DNS servers as 8.8.8.8 & 8.8.4.4
How to solve this web redirect issue? Will a Third-party generated CSR solves the problem?
Thanks,
CJ

Hi All,
The issue was with WISPr Protocol with iOS Clients. After upgrading the AirOS Code on the controller to 8.0.100.0; the issue with Web Redirect is resolved.
Jagan

Https redirection issue for Wireless Guest CWA - ISE 1.3

Our Setup is
ISE 1.3 (Patch level 2) running on ACS 1121
2 nodes clustered with Admin, monitoring, policy service enabled ( Primary and Secondary ).
Configured SSID Guest for Centralized web authentication with ISE.
We have issues in web redirection with chrome . It is not redirecting to the ISE page but rather showing " Page cannot be displayed".
By default chrome is pointing to https. For example if we type https://google.com it is not redirecting to ISE page. But when I specify the same as http://google.com it works.
There is no issue with IE, Firefox as it is redirecting to ISE page with default https and i can see it is hitting our rule.
Please advice.

Hi Neno
They are using a third party certificate (digi cert) for client auth. They have confirmed even if they use a self-signed-cert the result is same.
So basically none of the https page is not loading. If we manually browse some https site from Firefox, IE the result is same showing " page cannot be displayed".
Redirection to https is the problem which i have never faced with my other customer. This is the upgraded version of ISE from 1.2 to 1.3.

Acrobat 9.0 Runtime Error Vista SBS 2003 Folder Redirection Issue

I just got off of a two hour phone call with Adobe. They are unable to resolve my issue.
After installing Acrobat 9.0, we receive the following error:
"Microsoft Visual C++ Debug Library
Runtime Error!
Program: C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Acrobat.exe
The application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information.
I have tried the recommend fix without success: http://kb.adobe.com/selfservice/viewContent.do?externalId=kb404597
Someone please help. The user is an Administrator of the machine. The typical AppData path is \\servername\direct\username\Application. I changed it to x:\username\application to no avail.
This is a Vista machine, all updates, with Small Business Server 2003 with File Redirection.

Try http://www.adobe.com/go/kb401589
Especially solution 4.

Button URL Redirect - Issue passing %null% from LOV

I have issue when attempting to pass %null% from a LOV to a subsequent target page. The URL Redirect works fine when a value in selected in the LOV but passes gibberish "?ll" when no value is selected from the LOV. Can anyone shed some light on what's is going on?
Redirect looks like this:
f?p=112:411:508326687872582::NO:RP,411:P411_AGENCY,P411_CATEGORY,P411_BUDGET_YEAR,P411_OIT_OFFICE,P411_DESCRIPTION:002,%null%,2012,1665,webJeff
Edited by: jwellsnh on Jun 2, 2010 4:42 PM

svk1965,
Thank you for your response, I read many other threads and you are definitely on the right track. Got impatient though and took my project on a different track which ended being a better solution for me after all.
Jeff

Oracle Apps R12 iRec URL Redirection issue

Dear Friends,
We have configured R12 i-Rec in an server and placed in DMZ.
we have made this server as external and we have made the irec responsibilities to external and using the DMZ Server URL we were able to work without any issue.
Now to publish this URL to Interner users with https and Port masking , we have mapped this URL http://abc.com:8020 to https://xyz.com using Microsoft UGC Firewall 2010.
Now from Internet we were able to hit the URL https://xyz.com and could login as oracle application user with the same url https://xyz.com
But when we click any of the irec responsilities (irecruitmnt agency (or) others) which is made external, the page is redirected to the Real DMZ Server URL http://abc.com:8020/OA_HTML/...
and it shows error:
The page cannot be displayed.
I believe it should not happen , throughout the session it has to maintain the same new URL
Please let us know the Fix.
Regards,
DB

Hi;
What is error in apache log file?
Regard
Helios

CWA redirect issue and access across the WAN

Hello,
I am trying to get CWA working on my wireless ISE setup and am having an issue where the guest portal redirect is pointing to the wrong port. My setup is as follows:
The PSN has two connections - Gig 0 is on our management VLAN 172.24.x.x Gig 1 is on our guest network VLAN 10.190.x.x
Using a laptop I connect to the guest ssid and guest portal times out as it is pointing to 172.24.x.x instead of the guest vlan 10.190.x.x
We do not want guest traffic on the corp network for obvious reasons.
One more question - Is it possible to have guest access work across the WAN? For example, we have the admin box in Detroit and a PSN in Chicago. Detroit's guest network is routed through a tunnel to Chicago currently.
Some more info:
Here is from the radius authentication details -
cisco-av-pair=url-redirect=https://172.24.24.41:8443/guestportal/gateway?sessionId=ac18180a000024a45151d92d&action=cwa
How do I force it to 10.190.x.x and how does ISE get 172.24.24.41 for the redirect address? DNS? I guess I am unfamiliar with how cisco-av-pair attribute is determined. Any help will be greatly appreciated.

Have you ran anything such as MTR on a Linux box (or WINMTR equivalent on PC)? If so, can you find a trend in loss or high latency on a specific hop on the path? I would ensure you adjust the ICMP payload size to a higher size such as 1000Bytes and adjust the ping interval to every two seconds or so. This ensures you are not running into an issue where the provider is rate limiting your pings, which is not uncommon for some providers, if the pings (ICMP messages) are terminating on their endpoints.
Do you have QoS policies applied on interfaces on either end of these pings / traces? If so, do you have assurance that ICMP messages will not be impacted by queue based dropping or shaping latency? One solution is, move traffic from your ICMP traffic with the source or destination of your ICMP ping and trace endpoint in a priority queue with adequate bandwidth (should be a very low requirement). This may not make sense since your bandwidth utilization is low, but shaping of busy flows can actually occur long before congestion, depending on your design.
Another item that may give you better insight is running and monitoring / graphing IP-SLA probes between your routers on each end. You could then trend issues and give graphed evidence to your provider. They could then compare your lossy and high latency periods to their appliance interface, memory, and CPU loads to see if they can find a correlating trend. It can be a hard battle to get ISPs to not only admit they have issues, but allocate resources to isolate and resolve these issues. Good SLA probe data showing that their paths are not meeting delivery standards speak much louder that pings to them.

Web.xml servlet redirection question

Hi everyone;
As you know web.xml file allows you to enter something like this
     <servlet-mapping>
          <servlet-name>application1</servlet-name>
          <url-pattern>/application1</url-pattern>
     </servlet-mapping>
so you can find your application.
As you know it is case sensitive so if a user enters /Application1 it wouldn't be found. I was wondering if i could put a node in there that would redirect requests from Application1 to application.
Any ideas ?
Stev

oh i wasn't aware that i could put multiple nodes in there like this
<servlet-mapping>
<servlet-name>application1</servlet-name>
<url-pattern>/application1</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>application1</servlet-name>
<url-pattern>/Application1</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>application1</servlet-name>
<url-pattern>/APplication1</url-pattern>
</servlet-mapping>
is there a way to simply make this case insensitive and all requests get translated to the lowercase versioN?
Stev

Virtual page redirection issue - VWLC

Hello All,
I am using ISE for external web authentication. Once client enter the UN and PWD in the ISE guest portal, the client must redirect to 1.1.1.1 that is the local web page. But i get a blank page..? And also if i use local web page for the redirection also it is not working ..?
Any idea..
KVS

Symptoms or Issue
The URL redirection page in the client machine's browser does not correctly guide the end user to the appropriate URL.
Conditions:
This issue is most applicable to 802.1X authentication sessions that require URL redirection and Guest Centralized Web Authentication (CWA) login sessions.
Possible Causes:
There are multiple causes for this issue. See the Resolutions descriptions that follow for explanation.
Please check the below link for URL Redirection Resolutions:
http://www.cisco.com/en/US/docs/security/ise/1.1/user_guide/ise_troubleshooting.pdf

Jrun Servlet Filter Issue

Hi,
I am using the below filter mapping
<filter-mapping>
<filter-name>jscomments</filter-name>
<url-pattern>*.js</url-pattern>
</filter-mapping>
This Mapping works on my local linux dev box but I deploy it
on our acceptance machines, the Filter does not kick in. I am not
sure if all the static files(like js, html, etc) are being served
by any Webservers like Apache, IIS or if there is any mistake with
my mappings. I do not any Jrun Admin experience.
If any one had any similar issues in the past, please let me
know ASAP of any fix you might have.
Thanks
Alusac

Yes, I am using 2.4.
The filter that is not involed is defined:
<filter>
<filter-name>Authenticator</filter-name>
<filter-class>com.authentication.Authenticate</filter-class>
</filter>
<filter-mapping>
<filter-name>Authenticator</filter-name>
<servlet-name>UserService</servlet-name>
</filter-mapping>
and the servlet is:
<servlet id="Servlet_1">
<servlet-name>UserService</servlet-name>
<display-name>User Services</display-name>
<servlet-class>com.user.UserServices</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping id="Mapping_1">
<servlet-name>UserService</servlet-name>
<url-pattern>/User</url-pattern>
</servlet-mapping>

Servlet with Issues writing to MySQL Database using JNDI

I'm hung on one servlet for my site. It compiles fine, and is accessed fine by the JSP, but doesn't do as I intended: write my blog entries to the MySQL database!
As mentioned in the title, I'm using JNDI for connection pooling, via META-INF/context.xml.
I'm also using JDBC Realm with a form, and that's working just fine, so I'm sure my issue isn't context.xml, as it seems to be overriding Tomcat's context file just fine, at least for authentication.
Below is the code from the servlet, to include the annotations:
package projectEgress.web.blog;
import java.io.*;
import java.text.*;
import java.sql.*;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.*;
public final class blogInput {
     /* bean properties */
    private String blogHeader;
    private String blogSubheader;
    private String blogBody;
    private String externalLinks;
    Connection conn;
    Statement stmt;
        /* getters & setters */
        public String getBlogHeader() {
            return blogHeader;
        public void setBlogHeader(String blogHeader) {
            this.blogHeader = blogHeader;
        public String getBlogSubheader() {
            return blogSubheader;
        public void setBlogSubheader(String blogSubheader) {
            this.blogSubheader = blogSubheader;
        public String getBlogBody() {
            return blogBody;
        public void setBlogBody(String blogBody) {
            this.blogBody = blogBody;
        public String getExternalLinks() {
            return externalLinks;
        public void setExternalLinks(String externalLinks) {
            this.externalLinks = externalLinks;
        /* like it says, a void which writes to the database */
        public void writeToDatabase() {
            /* create the query string to fill the table */
            String query = "insert into blogEntry (blogHeader, blogSubheader, blogBody, externalLinks) values (\"" + this.blogHeader + "\", \"" + this.blogSubheader + "\", \"" + this.blogBody + "\", \"" + this.externalLinks + "\")";
            try {
                /*establish the datasource and make the connection */
                Context ctxt = new InitialContext();
                DataSource dsrc = (DataSource)ctxt.lookup("java:comp/env/jdbc/projectEgress");
                conn = dsrc.getConnection();
                stmt = conn.createStatement();
                /* Add data to table 'blogEntry' in our database */
                int input = stmt.executeUpdate(query);
                /* close the connections */
                stmt.close();
                conn.close();
                /* check for exceptions, ensure connections are closed */
                } catch (SQLException sqlx) {
                    sqlx.printStackTrace();
                } catch (Exception ex) {
                    ex.printStackTrace();
                } finally {
                    if (stmt != null) {
                        try {
                            stmt.close();
                    } catch (SQLException sqlx) {}
                    if (conn != null) {
                        try {
                            conn.close();
                    } catch (SQLException sqlx) {}
        Here are the settings I have in META-INF/context.xml (sans Realm stuff, which works):
<Context debug="1" reloadable="true">
    <Resource name="jdbc/projectEgress"
        auth="Container"
        type="javax.sql.DataSource"
        username="********"
        password="********"
        driverClassName="com.mysql.jdbc.Driver"
        url="jdbc:mysql://localhost:3306/projectEgress?autoReconnect=true"
        validationQuery="select 1"
        maxActive="15"
        maxIdle="8"
        removeAbandoned="true"
        removeAbandonedTimeout="120" />
    <WatchedResource>WEB-INF/web.xml</WatchedResource>
    <WatchedResource>META-INF/context.xml</WatchedResource>
</Context>And, finally, the code I'm using in the JSP which calls the method (the form action is directed to this file's URL):
    <jsp:useBean id="blogInput" class="projectEgress.web.blog.blogInput">
    <jsp:setProperty name="blogInput" property="*" />
        <jsp:scriptlet>blogInput.writeToDatabase();</jsp:scriptlet>
    </jsp:useBean>
    -YES, I know I'm using a scriptlet in a JSP... I really don't want to create a custom tag to call the method, at least not until I'm far along enough in the project to justify creating a library... let's make it all work, first! :o)
FINALLY, the form:
<form action="/projectEgress/area51/blogInput" method="post" id="adminForm" enctype="application/x-www-form-urlencoded">
     <div>
        <span class="inputheader">Blog Header</span><br />
      <input type="text" name="blogHeader" size="35" class="form" /><br />
        <span class="inputheader">Blog SubHeader</span><br />
      <input type="text" name="blogSubheader" size="45" class="form" /><br />
        <span class="inputheader">Blog Body</span><br />
      <textarea class="content" name="blogBody" rows="9" cols="60"></textarea><br />
        <span class="inputheader">External Links</span><br />
      <input type="text" name="externalLinks" size="45" class="form" /><br />
      <input type="submit" value="Post!" class="submit" />
     </div>
    </form>As far as I can tell, it should work, and it doesn't throw any errors (in fact it shows the success message rather than the configured error page), but when I check the blogEntry table from the MySQL prompt, it responds with "Empty set".
I've double checked to ensure that the table columns are present in MySQL and all the naming conventions line up and they do, so I figure it's my servlet that's broken.
Advice? Ideas?
Thanks in advance.
Edited by: -Antonio on Apr 25, 2008 8:03 PM with additional info

Okay, I changed a few things in the servlet code.
For one, I'm trying a PreparedStatement in place of Statement. Don't ask me what made me think it would work any better, it just stores the sql query in cache, but I thought I'd just try something else.
One thing this is allowing me to do is make the connection and statement (now PreparedStatement pStmt) objects local variables. It wouldn't allow me to do so before without giving me compile errors.
package projectEgress.web.blog;
import java.io.*;
import java.text.*;
import java.sql.*;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.*;
public final class blogInput {
     /* bean properties */
    private String blogHeader;
    private String blogSubheader;
    private String blogBody;
    private String externalLinks;
        /* getters & setters */
        public String getBlogHeader() {
            return blogHeader;
        public void setBlogHeader(String blogHeader) {
            this.blogHeader = blogHeader;
        public String getBlogSubheader() {
            return blogSubheader;
        public void setBlogSubheader(String blogSubheader) {
            this.blogSubheader = blogSubheader;
        public String getBlogBody() {
            return blogBody;
        public void setBlogBody(String blogBody) {
            this.blogBody = blogBody;
        public String getExternalLinks() {
            return externalLinks;
        public void setExternalLinks(String externalLinks) {
            this.externalLinks = externalLinks;
        /* like it says, a void which writes to the database */
        public synchronized void writeToDatabase() {
            Connection conn = null;
            PreparedStatement pStmt = null;
            /* create the query string to fill the table */
            String Query = "INSERT INTO blogEntry (blogHeader, blogSubheader, blogBody, externalLinks) VALUES (\"" + this.blogHeader + "\", \"" + this.blogSubheader + "\", \"" + this.blogBody + "\", \"" + this.externalLinks + "\")";
            try {
                /*establish the datasource and make the connection */
                Context ctxt = new InitialContext();
                DataSource dsrc = (DataSource)ctxt.lookup("java:comp/env/jdbc/projectEgress");
                conn = dsrc.getConnection();
                pStmt = conn.prepareStatement(Query);
                /* Add data to table 'blogEntry' in our database */
                pStmt.executeUpdate();
                pStmt.clearParameters();
                /* close the connections */
                pStmt.close();
                conn.close();
                /* check for exceptions, ensure connections are closed */
                } catch (SQLException sqlx) {
                    sqlx.printStackTrace();
                } catch (Exception ex) {
                    ex.printStackTrace();
                } finally {
                    if (pStmt != null) {
                        try {
                            pStmt.close();
                    } catch (SQLException sqlx) {}
                    if (conn != null) {
                        try {
                            conn.close();
                    } catch (SQLException sqlx) {}
}Someone out there has to have a thought on this.
Even if it's just something they think probably won't work, so long as it gives me another angle to see this from.

Servlet redirection

How do I send a redirect to a target frame in an html page, instead of the current frame using a servlet or JSP?

Is there away to accomplish this without javascript; instead using a HttpServletResponse object to redirect to a target frame?

Servlet redirection but maintain url in browser (make sense?!?)

Hi,
Would like to have a url like www.foo.com/careers
which will call a Servlet, passing in a parameter of "careers" so I know what content to display.
But instead of the url changing to www.foo.com/Servlet?page=careers in the browser (due to obj.con redirect), is there a way I can do this without the url changing from www.foo.com/careers, but still calls the relevant servlet and passes in the correct parameter?
Thanks

We were covering a very similar topic in this thread:
http://forum.java.sun.com/thread.jspa?threadID=5194280&tstart=10
Ultimately you would use the If structure with regular expressions to restart the request internally (the user-agent does not see this) with the full URI. Something like:
<If $uri =~ "/(.*)"
and $uri !~ "^/Servlet.*" >
NameTrans fn="restart" uri="/Servlet?page=$1"
</If>
This block appropriately placed in your obj.conf will internally restart the request with the original URI now used as the query string of the new request.
You could also use this instead:
<If not $internal
and $uri =~ "/(.*)" >
This will only perform the restart if the request being processed is determined to NOT be internally generated (e.g. an already restarted request).
Of course you should make sure that you application generates URLs that are appropriate to this URI space, not the canonical URI space. This configuration will also be pretty greedy with your URI space, preferring to rewrite everything:
/foobar/sub/dir/image.jpg
becomes
/Servlet?foobar/sub/dir/image.jpg
So you'll want to refine what options you're willing to match, and restrict the expression used here to be less inclusive.
For more information on this very nifty feature, see the docs at:
http://docs.sun.com/app/docs/doc/820-1062/6ncoqnpfh?a=view

Fix for Bass Redirection issue in sig

Hi everybody,
I have just ordered a Teufel Concept E 5. Speaker System. For that reason I'm now also dealing with the purchse of a 5. sound card. At first my favourite was the Audigy 2 ZS, but now I'm hesitating because I've read on several forums that the Teufel System also suffers from the Audigy series' malfunctioning driver-implemented Bass Redirection (an issue firstly reported 3 years ago, January 2002!!!) when it comes to upmix a stereo source to 5..
Just to remember: If Bass Redirection is unchecked in the drivers, the whole frequency spectrum of the stereo source will be directly sent to the front left/right channels (and no other channels), and the connected speaker system will have to split the frequency bands and feed its subwoofer with low-pass signals and the sats with high-pass signals (For example this is the case with Creative's own speaker systems which have internal crossovers). But most non-Creative 5. Systems don't have this internal functionality of mixing a stereo input up to subwoofer and sats. For such systems Creative implemented the "Bass Redirection" in their drivers: sub frequencies of the stereo source are low-pass filtered and sent to the discrete subwoofer output of the sound card. The issue is that this signal from the subwoofer output is too weak, forcing users to find workarounds to get bass when they're listening to stereo sources (such as Music in Winamp).
This issue, although known for 3 (three!!!) years now, has not yet been fixed by Creative. In late November 2004, Cat has replied to the Monster thread dealing with this issue on the old forums (http://uk.europe.creative.com/support/forums/thread.asp?thre=396&foru=5&page=34) (scroll down), promising to forward the issue to the driver dev team, but since that day nothing has happened anymore.
My question to the mods: is there a chance that this driver issue will be fixed in the near future? Otherwise I'll have to reconsider my options concerning my sound card purchase.
gre-ez
mcgyvrMessage Edited by mcgyvr8 on 0-20-2005 0:08 PM

I have the same thing with this option -and I asking for fix (again....)
I have Audigy 2 ZS OEM, Yamaha RXV-440 Home Cinema Recei'ver and big 5. home cinema speakers. Audigy 2 ZS is connected to Yamaha by 3 analog outputs (connecting it by spdif cause no CMSS stereo to surround upmix and only stereo sound for all none DD/DTS sound sources like MP3, games, mpg/DivX/XviD films...thats why I must connect them by annalog outputs/inputs).
When I disable bass redirection then speakers have full frequency response (20Hz - 20kHz) but there is no any signal on sub output (when I play stereo sound with CMSS Stereo Surround enabled).
When I enable bass redirection and set cutoff frequency to 70Hz then there is signal on analog sub out but speakers have bass cutted off (20Hz - 70Hz) and playing only frequencies from 70Hz to 20kHz
This option causing waste of basse from speakers (they have beatyful basse but no with this drivers).
Even when bass redirection is enabled, signal from sub output is very weak - I don't have so high sub volume regulation to turn it sound loud enough
I have this problems on SB Li've, I have this problem on Audigy 2 ZS and this problem still exist on Audigy 4 !!! (I'am using now modded Audigy 4 drivers to work on all Audigy series but there is the same problem as in orginal A2 ZS drivers).
I'am requesting only 2 fixes in drivers that is satisfy me completly (not only me - many people have the same problem):
. Add an option that will disable bass cutting from speakers when bass redirection is enabled or make bass redirection working only for subwoofer without any speakers frequency cutting.
2. Make signal from analog sub out louder because this volume level is not acceptable !!!
Please...
This problems causing that I starting to think about some other sound card from other producent...because that can't be Message Edited by FPPfan on 02-0-2005 08:52 PM

Servlet Filter issue

Hi,
In my project we have written custom filter which will intercept each request and check whether session is active or not. If not then redirect it to login page else user can do normal operation.
but the problem is, whenever i make a request, CustomFilter.doFilter() method is getting called 7-8 times. Ideally it should be called once, can anybody tell me what would be the root cause?
following are the configuration made for customfilter in web.xml
<filter>
<filter-name>customfilter</filter-name>
<filter-class>com.foo.CustomFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>customfilter</filter-name>
<url-pattern>*.jfsf</url-pattern>
</filter-mapping>
Apart from this, i do have faces-servlets default filter in web.xml
Am I am missing something in the filter configuration?>
Please advice.
Thanks
chintan

I have the same problem, but in my case its looping inside the doFilter and never terminationg from it, and becz of that I dont see the 1st page(Login page ) what could be the problem,
here is my web.xml..
     <filter>
          <filter-name>LoginFilter</filter-name>
          <filter-class>
               com.indemand.indab.architecture.LoginFilter
          </filter-class>
          <init-param>
               <param-name>error_page</param-name>
               <param-value>login.jsp</param-value>
          </init-param>
          <init-param>
               <param-name>login_page</param-name>
               <param-value>login.jsp</param-value>
          </init-param>
     </filter>
     <filter-mapping>
          <filter-name>LoginFilter</filter-name>
          <url-pattern>/*</url-pattern>
     </filter-mapping>
and here is filter class----
public void doFilter(ServletRequest request, ServletResponse response,
               FilterChain chain) throws IOException, ServletException {
          HttpSession session = ((HttpServletRequest) request).getSession(true);
          User currentUser = (User) session.getAttribute("user");
          String URI = ((HttpServletRequest) request).getRequestURI();
          System.out.println("Filter doFilter ......");
          if (filterConfig == null) {
               System.out.println("filterConfig null.");
               return;
          if (filterConfig.getInitParameter("error_page") != null) {
               errorPage = filterConfig.getInitParameter("error_page");
          } else {
               errorPage = "/indabch/login.jsp";
          if (filterConfig.getInitParameter("login_page") != null) {
               loginPage = filterConfig.getInitParameter("login_page");
          } else {
               loginPage = "/indabch/login.jsp";
          if (currentUser == null) {
               ((HttpServletResponse) response).sendRedirect(loginPage);
          } else {
               AuthorizationManager loginMan = new LoginManager();
               boolean authorized = loginMan.isUserAuthorized(currentUser
                         .getLoginName(), currentUser.getPassword());
               if (authorized) {
                    chain.doFilter(request, response);
               } else {
                    ((HttpServletResponse) response).sendRedirect(errorPage);
     }

Servlet Redirection issue

Similar Messages

Maybe you are looking for