Session Integrity during Patching

I was wondering about what logged-in users of an HTML DB application experience if the application is being patched while they are working? I know there has been some discussion on this forum before about the fact that the deployment of a new version of an HTML DB application is effectively atomic, but surely there could be an issue if the user is in the middle of a "flow" through some application logic - e.g. in the middle of a wizard-type application or similar.
If, say, the patched application now contains some new items on a page the user has been to that are used on a subsequent page, the user's session will not have those items. There could be an issue about data integrity etc., or some failed validation/process that would not normally be able to occur for a user logging in fresh to the newly patched application.
While we like to minimise downtime, is there a way to forcibly kick users from the application during the patch deployment, or another approach that anyone might suggest? I know that you can set the application to Unavailable, but I believe that if the user doesn't perform any action during the period until the app is Available again, then their session state still persists.
Sorry if what I'm asking is unclear, but I'd like to make sure we have as watertight a patching process as we can.
Jon.

Jon,
The easiest way to avoid this issue is to take down the web server. Any other "workaround" has the potential for something to slip through the cracks.
Having said that, you could do one of the following:
- Run the script late at night, thus minimizing the number of active sessions
- Purge all sessions, immediately make the application Unavailable, and then upgrade. This is likely the most fool-proof method, as all sessions will become invalid immediately, and as long as you can change the application status faster than it takes for someone to log in, you should be good.
- Put a notification of the planned downtime on every page of your application, but never actually take down the server. If it's in their face enough, most uses will plan on doing something else during the downtime, thus minimizing the number of actual live sessions. (Yes, it's sneaky, but it works...)
Thanks,
- Scott -

Similar Messages

  • Saving session state during pagination

    See
    http://htmldb.oracle.com/pls/otn/f?p=24317:152
    I hacked into the PPR function to save the checkbox value into session state during pagination.
    Is there a way to do something similar for checkboxes in the report itself rendered using htmldb_item.checkbox()?
    Or is this an ill-advised effort?
    [The UI requirement here is clear...I have a bunch of items over many pages and I want to select them using checkboxes and have the selections remembered as I paginate back and forth.
    If you use Yahoo Mail, Compose a new message, click on the Insert Addresses link and it pops up a window with all your contacts, you can select them using checkboxes and go to the Next/Previous page and it remembers the selections]
    Thanks

    See
    http://htmldb.oracle.com/pls/otn/f?p=24317:152
    Click on the Create/Reset collection button to initialize your own private collection to play with.
    The checkboxes are remembered as you paginate thru the resultset. Basically, the state of the checkboxes is saved into session state using htmldb_Get before calling the PPR function to get the next/previous rows.
    Carl, let me know what you think of the approach. Is it a viable approach? Any caveats?
    [Unfortunately, I had to to make a copy of the builtin html_PPR_Report_Page function to make the above modification in it, didnt see a way to avoid it]
    Thanks

  • Transport of Copies for Modif. Adjust. Transports during patch application

    Hi Experts,
    I've got two transport requests(Modification Adjustment Transports) in the DEV system containing SPAU and SPDD corrections for patch APPL-19, I need to include these Modification Adjustment transports when I start applying patch APPL-19 in my QTY system, wherein it prompts me to include Modification Adjustment Transports if any.
    I've been told to release these requests in the DEV system encorporate both these requests into once and create a single request of the type Transport of Copies, and supply the Transport Request No. of this Transport of Copies request when it prompts me for Modification Adjustment Transports in the QTY system during patch APPL-19 application.
    Please help me out with the procedure to create Transport of Copies for my case, also if you could post some theory on "Transport of Copies", it would be highly helpful.
    Thanks Alot in advance.

    Hi,
    Check the thread for transport of copies creation.
    Request type  Transport of Copies
    For theory check http://help.sap.com/saphelp_nw04/helpdata/en/57/38e1a94eb711d182bf0000e829fbfe/content.htm and related links as well which mention how to include objects into a request.
    Regards,
    Srikishan

  • Generic error during patching

    Hi experts.
    Hope you are all having a great weekend. I am patching, so not so great :(
    I have noticed that adpatch is throwing the following error during patching:
    Start Processing Snapshot Info
    AutoPatch error:
    Unable to upload "filescopied_2017.txt" to update the current view of the snapshot.
    Uploading "d:\oracle\prodappl\admin\PROD\out\filescopied_2071.txt" ...
    This occurrs on each patch; it is not fatal and doesnt hold up the process. I just wanted to know if anyone had any idea about it. I understand there is an adadmin job i can run to remedy this?
    To access snapshot information launch adadmin, select option 2 - Maintain Applications Files menu, select 5 - Maintain snapshot information . . . is this the way forward?
    Thanks.
    DA
    Oracle Server 2003
    11.5.10
    Edited by: Dan A on Mar 27, 2010 6:21 AM

    Hi Dan,
    Hope you are all having a great weekend. I am patching, so not so great :(You are not alone, I am patching too :)
    What is the application release? And, what is the patch number?
    Uploading "d:\oracle\prodappl\admin\PROD\out\filescopied_2071.txt" ...Can you locate this file?
    This occurrs on each patch; it is not fatal and doesnt hold up the process. I just wanted to know if anyone had any idea about it. I understand there is an adadmin job i can run to remedy this?Correct.
    To access snapshot information launch adadmin, select option 2 - Maintain Applications Files menu, select 5 - Maintain snapshot information . . . is this the way forward?Yes -- Try this option and make sure it runs successfully and see if the patch runs OK then.
    Regards,
    Hussein

  • Windows 2012 + hyper-v + mouse not captured in remote desktop session + integrated services installed

    windows 2012 + hyper-v + mouse not captured in remote desktop session + integrated services installed

    Hi,
    I am using Server 2012 R2 with Hyper-V and CentOS 6.5 that installed GNOME.
    Same no mouse on remote desktop session or on the host's Hyper management interface.
    From my knowledge, CentOS from 6.4 build in include the IS, how do I update the IS in CentOS 6.4-6.5 guest OS? Any detail docunment for reference?
    Thank you.

  • Worker failed during  Patch FND.H 3262159

    Dear All
    Now I need to apply patch 3262159 to upgrade to FND.H on Oracle Apps 11.5.8 with database 9.2.0.8 instaaled on Windows server 2003 r2
    and during patch applying Worker failed and this is log for worker
    Creating temporary archive file
         H:\oracle\prodappl\admin\PROD\out\p003ldjva.jar
    using input file
         H:\oracle\prodappl\ecx\11.5.0\java\jar\ecxprocess.jar
    to load into database with arguments:
    -mx256m -Xrs oracle.apps.ad.jri.admetarm -inputFile H:\oracle\prodappl\ecx\11.5.0\java\jar\ecxprocess.jar -outputFile H:\oracle\prodappl\admin\PROD\out\p003ldjva.jar
    Temporarily resetting CLASSPATH to:
    "H:\oracle\prodappl\ad\11.5.0\java\adjri.zip;H:\oracle\prodcomn\util\java\jdk1_3_1_15\lib\rt.jar;H:\oracle\prodcomn\util\java\jdk1_3_1_15\lib\i18n.jar;H:\oracle\prodcomn\util\java\jdk1_3_1_15\lib\tools.jar;H:\oracle\prodcomn\java\appsborg.zip;H:\oracle\prodcomn\java\apps.zip;H:\oracle\prodora\8.0.6\forms60\java;H:\oracle\prodcomn\java"
    Calling H:\oracle\prodcomn\util\java\jdk1_3_1_15\bin\java.exe ...
    Error:
    Program exited with status 1
    Cause: The program terminated, returning status code 1.
    Action: Check your installation manual for the meaning of this code on this operating system.ERROR: I/O error while writing archive file H:\oracle\prodappl\admin\PROD\out\p003ldjva.jar
    Failed writing output file H:\oracle\prodappl\admin\PROD\out\p003ldjva.jar
    Error(s) have occurred; exiting with status 1
    Failed to create temporary archive file
         H:\oracle\prodappl\admin\PROD\out\p003ldjva.jar
    FYI the p003ldjva.jar not found under mentioned path (H:\oracle\prodappl\admin\PROD\out\p003ldjva.jar)
    I searched about it but did not find any thing except this Metalink :395889.1 but don't understand this suitable with my case or not
    Please can anyone help me since this issue is part from upgrading from 11.5.8 to 12.1.1
    Thanks&BR
    Tarek

    Were you able to find a solution to this issue? I am having the same problem, different patch. I have 8 failed workers, all with the same error. Different jar files. I can only think that I have some issue with java on my server.
    Start time for file is: Wed May 11 2011 09:53:55
    Creating temporary archive file
    /opt/appldev2/apps/admin/DEV2/out/p002ldjva.jar
    using input file
    /opt/appldev2/apps/cz/11.5.0/java/jar/czdb.jar
    to load into database with arguments:
    -ms128m -mx256m oracle.apps.ad.jri.admetarm -inputFile /opt/appldev2/apps/cz/11.5.0/java/jar/czdb.jar -outputFile /opt/appldev2/apps/admin/DEV2/out/p002ldjva.jar
    Temporarily resetting CLASSPATH to:
    "/opt/appldev2/apps/ad/11.5.0/java/adjri.zip:/opt/appldev2/comn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/opt/appldev2/comn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/opt/appldev2/comn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/opt/appldev2/comn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/opt/appldev2/comn/java/appsborg2.zip:/opt/oracle/product/appldev2/8.0.6/forms60/java:/opt/appldev2/comn/java"
    Calling /opt/appldev2/comn/util/java/1.4/j2sdk1.4.2_04/bin/java ...
    ERROR: I/O error while writing archive file /opt/appldev2/apps/admin/DEV2/out/p002ldjva.jar
    Failed writing output file /opt/appldev2/apps/admin/DEV2/out/p002ldjva.jar
    Error(s) have occurred; exiting with status 1
    Failed to create temporary archive file
    /opt/appldev2/apps/admin/DEV2/out/p002ldjva.jar
    I have confirmed that permissions are correct on /opt/appldev2/apps/admin/DEV2/out. I can "touch p002ldjva.jar" in the directory. I am unable to do a direct copy, as this file does not actually exist in the patch. It is created from czdb.jar.
    I also have sufficient space on the disk.
    Filesystem Size Used Avail Use% Mounted on
    /dev/mapper/VolGroup01-LogVol02
    40G 16G 22G 43% /opt/appldev2
    Edited by: SarahR on May 11, 2011 8:23 AM

  • Session value during function call

    I am not able to catch new updated value from session even after i have used
    response.sendRedirect("");
    to resubmit page.
    Is there any another way so that i can get the updated session value during any function call generated by another frame on the same page.

    Is there any who have some thing to say about it ..

  • SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching

    Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers.  When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
    server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task".  The task disappears and there is no history to view.
    Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
    How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.

    SCCM should use the following SCOM SDK to do that.
    http://msdn.microsoft.com/en-us/library/bb437532.aspx
    That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
    which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
    The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
    reflected in the OpsMgr console).
    Jason | http://blog.configmgrftw.com

  • Solution Manager 7.1 SP4: Session Timeout during SOLMAN_SETUP

    Hello Experts,
    We recently installed Solution Manager 7.1 SP4 on Linux/Oracle. We also completed the System Preparation and Basic Configuration part of the SOLMAN_SETUP wizard as well (which includes applying the Central Correction Note and other steps).
    During the Managed System Setup Part, as soon as we click on the Configure System for a managed system - a new window opens up and immediately we get the below timeout messages:
    This session will terminate due to inactivity in 0:00 minutes
    To continue working in this session, choose 'Continue Session'
    The above is immediately followed by the actual session timeout message:
    This session terminated due to inactivity.
    Click Close Popup
    or to start new session, press F5.
    Now even if we press F5/Refresh, the same cycle repeats.
    I already checked the ICM timeout parameters as mentioned in the Guide and further findings with regards to ITS update as in thread WEBGUI Timeout immediately after logging in
    Applying the latest kernel patch also did not help. The strange issue is that the session timeout occurs only the LMDB related services, wherease normal services like WEBGUI etc work fine.
    Please suggest if anyone came across this issue, especially after update to SP04.
    Thanks and Regards,
    Srikishan

    Hi,
    Thanks, I will check the note steps and close this thread accordingly.
    Perhaps I need to hone my notes searching skills !
    Regards,
    Srikishan

  • Adrelink failed during patching

    Hi all,
    I have a question. I try to patch 3460000 (11.5.10 ORACLE E-BUSINESS SUITE CONSOLIDATED UPDATE 2 Applications Update）on EBS11i, during the adrelink i got an error below.
    make: *** [d01/oracle/visappl/eng/11.5.0/bin/ENCACN] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCCPP] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCMON] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCNEW] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCNSP] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCPCL] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCPDW] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCPRG] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCSDW] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCSLD] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msc/11.5.0/bin/MSCXGCAL] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/mso/11.5.0/bin/MSONEW] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/msr/11.5.0/bin/MSRNEW] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/mst/11.5.0/bin/MSTCPP] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/mst/11.5.0/bin/MSTNEW] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/mst/11.5.0/bin/MSTSDELW] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/mst/11.5.0/bin/MSTSNMON] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/mst/11.5.0/bin/MSTSNWRK] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/mst/11.5.0/bin/MSTSQLDR] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wip/11.5.0/bin/WICDOL] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wip/11.5.0/bin/WICMEX] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wip/11.5.0/bin/WICMLX] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wps/11.5.0/bin/WPCFSQ] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wps/11.5.0/bin/WPCWFS] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/eng/11.5.0/bin/ENCACN] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wip/11.5.0/bin/WICDOL] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wip/11.5.0/bin/WICMEX] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/wip/11.5.0/bin/WICMLX] Error 1
    See error messages above (also recorded in log file) for possible
    make: *** [d01/oracle/visappl/eng/11.5.0/bin/ENCACN] Error 1
    See error messages above (also recorded in log file) for possible
    [oracle@london 5644137]$
    I try to find an solution on oracle support site. But I haven't fixed the issue yet. Could you give me some advice?
    Thanks,
    Kevin

    [oracle@london bin]$ adrelink_mod.sh force=y "wip WICMEX"
    You are running adrelink, version 115.26
    Start of adrelink session
    Date/time is Thu Apr 28 04:44:24 CST 2011
    Log file is /d01/oracle/visappl/admin/log/adrelink.log
    Command line arguments are
    "force=y" "wip WICMEX"
    Operating System Information (output of 'uname -a'):
    Linux london.oracle.com 2.6.9-89.0.0.0.1.ELsmp #1 SMP Tue May 19 04:23:49 EDT 2009 i686 i686 i386 GNU/Linux
    Backup Mode is "file"
    Removing extra variables from the environment...
    adrelink will save the following variables (if set):
    - Generic:
    "PATH ORACLE_HOME TMPDIR TZ APPL_TOP APPLFENV PLATFORM LD_LIBRARY_PATH COBDIR LIBPATH NLS_LANG JAVA_TOP PERL5LIB"
    - Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
    Beginning pass 1.
    Processing 353 environment variables...
    341 removed; 12 saved.
    Beginning pass 2.
    Processing 12 environment variables...
    0 removed; 12 saved.
    Done removing extra environment variables.
    Removing Application products' bin directories from PATH ...
    Done removing Application products' bin directories from PATH
    Reading Oracle Applications environment file
    Your Oracle Applications environment file is /d01/oracle/visappl/VIS_london.env
    Removing $FND_TOP/$APPLBIN from PATH ...
    Done removing $FND_TOP/$APPLBIN from PATH
    Removing extra variables from the environment (again)...
    adrelink will save the following variables (if set):
    - Generic:
    "PATH ORACLE_HOME TMPDIR TZ LD_LIBRARY_PATH COBDIR LIBPATH NLS_LANG JAVA_TOP PERL5LIB"
    - Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
    Beginning pass 1.
    Processing 327 environment variables...
    318 removed; 9 saved.
    Beginning pass 2.
    Processing 9 environment variables...
    0 removed; 9 saved.
    Done removing extra environment variables (again).
    Re-reading critical environment variables ...
    Done re-reading critical environment variables
    ORACLE RDBMS Version 8.0.6.0.0
    Oracle Reports Version 6.0
    Oracle Applications Release 11
    Current product is AD
    LADLIB is set to /d01/oracle/visappl/ad/11.5.0/lib/libad.a
    Current product is ALR
    LALRLIB is set to /d01/oracle/visappl/alr/11.5.0/lib/libalr.a
    Current product is AP
    LAPLIB is set to /d01/oracle/visappl/ap/11.5.0/lib/libap.a
    Current product is AR
    LARLIB is set to /d01/oracle/visappl/ar/11.5.0/lib/libar.a
    LARSRW is set to /d01/oracle/visappl/ar/11.5.0/lib/xirar.o $(LARLIB)
    Current product is AS
    LASLIB is set to /d01/oracle/visappl/as/11.5.0/lib/libas.a
    Current product is AX
    LAXLIB is set to /d01/oracle/visappl/ax/11.5.0/lib/libax.a
    Current product is BOM
    LBOMLIB is set to /d01/oracle/visappl/bom/11.5.0/lib/libbom.a
    Current product is CRP
    LCRPLIB is set to /d01/oracle/visappl/crp/11.5.0/lib/libcrp.a
    Current product is CUA
    LCUALIB is set to /d01/oracle/visappl/cua/11.5.0/lib/libcua.a
    Current product is CZ
    LCZLIB is set to /d01/oracle/visappl/cz/11.5.0/lib/libcz.a
    Current product is DT
    LDTLIB is set to /d01/oracle/visappl/dt/11.5.0/lib/libdt.a
    Current product is ENG
    LENGLIB is set to /d01/oracle/visappl/eng/11.5.0/lib/libeng.a
    Current product is FA
    LFALIB is set to /d01/oracle/visappl/fa/11.5.0/lib/libfa.a
    LFASRW is set to /d01/oracle/visappl/fa/11.5.0/lib/xirfa.o $(LFALIB)
    Current product is FEM
    adrelink: Warning: not setting LFEMLIB
    since /d01/oracle/visappl/fem/11.5.0/lib/libfem.a does not exist
    or cannot be read.
    Current product is FF
    LFFLIB is set to /d01/oracle/visappl/ff/11.5.0/lib/libff.a
    LFFSRW is set to /d01/oracle/visappl/ff/11.5.0/lib/xirff.o $(LFFLIB)
    Current product is FND
    LFNDLIB is set to /d01/oracle/visappl/fnd/11.5.0/lib/libfnd.a
    LFNDSRW is set to /d01/oracle/visappl/fnd/11.5.0/lib/xirfnd.o $(LFNDLIB)
    Current product is GL
    LGLLIB is set to /d01/oracle/visappl/gl/11.5.0/lib/libgl.a
    Current product is GMA
    LGMALIB is set to /d01/oracle/visappl/gma/11.5.0/lib/libgma.a
    Current product is GMD
    LGMDLIB is set to /d01/oracle/visappl/gmd/11.5.0/lib/libgmd.a
    Current product is GME
    LGMELIB is set to /d01/oracle/visappl/gme/11.5.0/lib/libgme.a
    Current product is GMF
    LGMFLIB is set to /d01/oracle/visappl/gmf/11.5.0/lib/libgmf.a
    Current product is GMI
    LGMILIB is set to /d01/oracle/visappl/gmi/11.5.0/lib/libgmi.a
    Current product is GML
    LGMLLIB is set to /d01/oracle/visappl/gml/11.5.0/lib/libgml.a
    Current product is GMP
    LGMPLIB is set to /d01/oracle/visappl/gmp/11.5.0/lib/libgmp.a
    Current product is IBY
    LIBYLIB is set to /d01/oracle/visappl/iby/11.5.0/lib/libiby.a
    Current product is INV
    LINVLIB is set to /d01/oracle/visappl/inv/11.5.0/lib/libinv.a
    Current product is MRP
    LMRPLIB is set to /d01/oracle/visappl/mrp/11.5.0/lib/libmrp.a
    Current product is MSC
    LMSCLIB is set to /d01/oracle/visappl/msc/11.5.0/lib/libmsc.a
    Current product is MSO
    LMSOLIB is set to /d01/oracle/visappl/mso/11.5.0/lib/libmso.a
    Current product is MSR
    LMSRLIB is set to /d01/oracle/visappl/msr/11.5.0/lib/libmsr.a
    Current product is MST
    LMSTLIB is set to /d01/oracle/visappl/mst/11.5.0/lib/libmst.a
    Current product is MWA
    LMWALIB is set to /d01/oracle/visappl/mwa/11.5.0/lib/libmwa.a
    Current product is PA
    LPALIB is set to /d01/oracle/visappl/pa/11.5.0/lib/libpa.a
    Current product is PAY
    LPAYLIB is set to /d01/oracle/visappl/pay/11.5.0/lib/libpay.a
    Current product is PO
    LPOLIB is set to /d01/oracle/visappl/po/11.5.0/lib/libpo.a
    LPOSRW is set to /d01/oracle/visappl/po/11.5.0/lib/xirpo.o $(LPOLIB)
    Current product is PON
    adrelink: Warning: not setting LPONLIB
    since /d01/oracle/visappl/pon/11.5.0/lib/libpon.a does not exist
    or cannot be read.
    Current product is RG
    LRGLIB is set to /d01/oracle/visappl/rg/11.5.0/lib/librg.a
    Current product is WIP
    LWIPLIB is set to /d01/oracle/visappl/wip/11.5.0/lib/libwip.a
    Current product is WPS
    LWPSLIB is set to /d01/oracle/visappl/wps/11.5.0/lib/libwps.a
    Current product is WSM
    LWSMLIB is set to /d01/oracle/visappl/wsm/11.5.0/lib/libwsm.a
    Current product is XDP
    LXDPLIB is set to /d01/oracle/visappl/xdp/11.5.0/lib/libxdp.a
    LUSRLIB is /d01/oracle/visappl/fnd/11.5.0/usrxit/libusr.a
    Not linking Oracle Applications with any Oracle mail product
    LALRSTUB is now set to /d01/oracle/visappl/alr/11.5.0/lib/alstub.o
    MAILLNK is now set to /d01/oracle/visappl/alr/11.5.0/lib/alstub.o
    Creating prefix makefiles ...
    Done creating prefix makefiles
    Starting link of product 'wip' on Thu Apr 28 04:44:31 CST 2011
    Current product is wip
    Current product TOP is  $WIPTOP
    Current prodarea is /d01/oracle/visappl/wip/11.5.0
    Backing up or removing executables...
    rm -f /d01/oracle/visappl/wip/11.5.0/bin/WICMEX
    Done backing up or removing executables.
    Relinking module 'WICMEX' in product wip ...
    make -f /d01/oracle/visappl/admin/out/link_wip_9983.mk /d01/oracle/visappl/wip/11.5.0/bin/WICMEX
    Starting link of wip executable 'WICMEX' on Thu Apr 28 04:44:31 CST 2011
    g++ -s -L/d01/oracle/visora/8.0.6/lib -L/d01/oracle/visora/8.0.6/lib/stubs -o /d01/oracle/visappl/wip/11.5.0/bin/WICMEX \
    /d01/oracle/visappl/wip/11.5.0/lib/wimcmex.o \
    /d01/oracle/visappl/wip/11.5.0/lib/wicmex.o \
    /d01/oracle/visappl/wip/11.5.0/lib/libwip.a \
    /d01/oracle/visappl/wps/11.5.0/lib/libwps.a \
    /d01/oracle/visappl/wip/11.5.0/lib/libwip.a \
    /d01/oracle/visappl/sht/11.5.0/lib/ilog/5.1/libschedule.a /d01/oracle/visappl/sht/11.5.0/lib/ilog/5.1/libsolver.a /d01/oracle/visappl/sht/11.5.0/lib/ilog/5.1/libconcert.a /d01/oracle/visappl/sht/11.5.0/lib/ilog/5.1/libhybrid.a \
    /d01/oracle/visappl/sht/11.5.0/lib/rwave/libstd8s.a \
    /d01/oracle/visappl/bom/11.5.0/lib/libbom.a \
    /d01/oracle/visappl/eng/11.5.0/lib/libeng.a \
    /d01/oracle/visappl/crp/11.5.0/lib/libcrp.a \
    /d01/oracle/visappl/mrp/11.5.0/lib/libmrp.a \
    /d01/oracle/visappl/inv/11.5.0/lib/libinv.a \
    /d01/oracle/visappl/bom/11.5.0/lib/libbom.a \
    /d01/oracle/visappl/fnd/11.5.0/lib/libfnd.a \
    -lsql /d01/oracle/visora/8.0.6/lib/nautab.o /d01/oracle/visora/8.0.6/lib/naeet.o /d01/oracle/visora/8.0.6/lib/naect.o /d01/oracle/visora/8.0.6/lib/naedhs.o `cat /d01/oracle/visora/8.0.6/lib/naldflgs` -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lmm -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lnetv2 -lnttcp -lnetwork -lncr -lclient -lvsn -lcommon -lgeneric -lepc -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 -lclient -lvsn -lcommon -lgeneric -lnlsrtl3 -lcore4 -lnlsrtl3 -lcore4 -lnlsrtl3 `cat /d01/oracle/visora/8.0.6/lib/sysliblist` -ldl -lpthread -lm /d01/oracle/visora/8.0.6/rdbms/lib/defopt.o /d01/oracle/visora/8.0.6/rdbms/lib/ssbbded.o /usr/lib/libstdc++-2-libc6.1-1-2.9.0.so
    /d01/oracle/visappl/wps/11.5.0/lib/libwps.a(wpdbrd.o)(.gnu.linkonce.d.__vt_16AbstractDBReader+0x8): undefined reference to `__pure_virtual'
    /d01/oracle/visappl/wps/11.5.0/lib/libwps.a(wpdbwt.o)(.gnu.linkonce.d.__vt_16AbstractDBWriter+0x8): undefined reference to `__pure_virtual'
    /d01/oracle/visappl/wps/11.5.0/lib/libwps.a(wpfscmsg.o)(.rodata+0x172c): undefined reference to `__pure_virtual'
    /d01/oracle/visappl/wps/11.5.0/lib/libwps.a(wpmsg.o)(.rodata+0x11c): undefined reference to `__pure_virtual'
    /d01/oracle/visappl/wps/11.5.0/lib/libwps.a(wpmsg.o)(.rodata+0x128): undefined reference to `__pure_virtual'
    /d01/oracle/visappl/wps/11.5.0/lib/libwps.a(wpmsg.o)(.rodata+0x12c): more undefined references to `__pure_virtual' follow
    /usr/lib/gcc-lib/i386-redhat-linux/3.2.3/libgcc_s.so: undefined reference to `dl_iterate_phdr@GLIBC_2.2.4'
    collect2: ld returned 1 exit status
    make: *** [d01/oracle/visappl/wip/11.5.0/bin/WICMEX] Error 1
    Done with link of wip executable 'WICMEX' on Thu Apr 28 04:44:40 CST 2011
    Relink of module "WICMEX" failed.
    See error messages above (also recorded in log file) for possible
    reasons for the failure. Also, please check that the Unix userid
    running adrelink has read, write, and execute permissions
    on the directory /d01/oracle/visappl/wip/11.5.0/bin,
    and that there is sufficient space remaining on the disk partition
    containing your Oracle Applications installation.
    Done with link of product 'wip' on Thu Apr 28 04:44:40 CST 2011
    adrelink is exiting with status 1
    End of adrelink session
    Date/time is Thu Apr 28 04:44:40 CST 2011
    Line-wrapping log file for readability ...
    Done line-wrapping log file.
    Original copy is /d01/oracle/visappl/admin/log/adrelink.lsv
    New copy is /d01/oracle/visappl/admin/log/adrelink.log
    [oracle@london bin]$

  • Best practice to secure database during patching/upgrade-Vault disabled

    I have a highly confidential system and to protect the data in the DB, I intend to use Oracle Vault. In my company, we have centralized services and therefore, the oracle Unix owner and sysdba are owned by this group, not the application dba that "knows" the system (me).
    The problem I have is what would be the best way to protect my data from the sysdba user during the window that Vault is disabled?
    I thougth maybe I could un-mount and file protect the tablespace from the Unix oracle user during the upgrade process, but the tablespace could be outdated when I remount it after the patch. I am not sure how I might patch it seperatley. I am thinking I might export and drop the schema during the patching, then load it back in when vault is enabled again. This will work for a year or so, but I envision the databases getting too large to do this efficiently.
    Does anyone have any thoughts on how I might protect the data in this scenario?
    Edited by: user4714217 on Oct 20, 2008 11:06 AM for clarity

    Hi,
    I did not understood your question properly, but the thing which I understood is like you do not want any other user to access the database when your security vault is disabled.
    At that time you can
    1) Start the database in restrict mode (only a sysdba can do it).
    2) Change the password/lock the user till the time your patching activity is going (any user with dba role can do it, so might be not so useful)
    Regards
    Anurag Tibrewal

  • During patch 3480000 iebsvclvl.ldt  again

    Dear All
    I am in the process of installing Patch 3480000 (11.5.10.2) and now worker failed iebsvclvl.ldt after restart the patch for second time
    FYI : in the first time the issue according to note_id:ID 467991.1 solved by copile the package (alter package FND_DESCR_FLEX_CONTEXTS_PKG compile body;) but when rerun the patch for
    second time and compile this package
    the same worker still failed
    and following is last part of log file
    H:\oracle\prodappl\fnd\11.5.0\bin\FNDLOAD.exe &ui_apps 0 Y UPLOAD @IEB:patch/115/import/iebsvclvl.lct @IEB:patch/115/import/US/iebsvclvl.ldt
    Error:
    Program exited with status 3
    Cause: The program terminated, returning status code 3.
    Action: Check your installation manual for the meaning of this code on this operating system.
    Log filename : H:\oracle\prodappl\admin\PROD\log\l224529.req
    Report filename : H:\oracle\prodappl\admin\PROD\out\o224529.out
    AD Worker error:
    The above program failed with error code 3.
    See the AD Worker log file and/or the program log file for details
    and following is last part from l224529.req
    Uploading from the data file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt
    Altering database NLS_LANGUAGE environment to AMERICAN
    Dump from LCT/LDT files (H:\oracle\prodappl\ieb\11.5.0\patch\115\import\iebsvclvl.lct(115.0), H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt) to stage tables
    Dump LCT file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\iebsvclvl.lct(115.0) into FND_SEED_STAGE_CONFIG
    Dump LDT file H:\oracle\prodappl\ieb\11.5.0\patch\115\import\US\iebsvclvl.ldt into FND_SEED_STAGE_ENTITY
    Dumped the batch (IEB_SERVICE_LEVELS 1008 , IEB_SERVICE_LEVELS 1000 ) into FND_SEED_STAGE_ENTITY
    Upload from stage tables
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1008, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1003, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1006, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1001, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1009, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1004, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1007, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1002, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1005, ORA-06508: PL/SQL: could not find program unit being called
    Error loading seed data for IEB_SERVICE_LEVELS: SERVICE_LEVEL_ID = 1000, ORA-06508: PL/SQL: could not find program unit being called
    Please any help
    BR
    Tarek

    Hi
    Q: I am applying patch can I open another session and run adadmin ? (Thanks to Amit Pancholia for pointing this out)
    A: Yes & No (depends on stage of patching), you can run adadmin if FND_INSTALL_PROCESSES is NOT locked (in use) by adpatch session. If this table is in use by adpatch session then you can’t run adadmin at same time.
    Referance:
    http://onlineappsdba.com/index.php/2008/09/10/interview-questions-for-oracle-apps-dbas-11ir12-part-9/
    Regard
    Helios

  • Error in MSS_FORMAT_RELEASE during Patching SAPKB70107

    Hi All,
    we are having issue during the support package upgrade abap and basis
    component SAPKB70107 and SAPKB70108,the upgrade stuck in XPRA_EXECUTION
    with bellow error:
    Post-import method MSS_SDBP_AFTER_IMP started for SDBP L, date and
    time: 20110114233820
    Starting processing of SQL scripts (R3TR SDBP)...
    Error in MSS_FORMAT_RELEASE
    Deletion request for SQL script sap_delete_part_orphans
    SQL script sap_delete_part_orphans 9.0 A will be ignored (incorrect
    release)
    SQL script sap_delete_part_orphans A.0 A will be ignored (incorrect
    release)
    Deletion request for SQL script sap_get_all_part_orphans
    SQL script sap_get_all_part_orphans 9.0 A will be ignored (incorrect
    release)
    SQL script sap_get_all_part_orphans A.0 A will be ignored (incorrect
    release)
    SQL script sap_mon_sqldbfiles A.0 A will be ignored (incorrect release) SQL script sap_mon_sqlsetup 9.0 A will be ignored (incorrect release)
    SQL script sap_mon_sqlsetup A.0 A will be ignored (incorrect release)
    SQL script sap_mon_staticserver 9.0 A will be ignored (incorrect
    release)
    SQL script sap_mon_staticserver A.0 A will be ignored (incorrect
    release)
    SQL script sap_verify_backups 8.0 A will be ignored (incorrect release) SQL script sap_verify_backups 9.0 A will be ignored (incorrect release) SQL script sap_verify_backups A.0 A will be ignored (incorrect release) SQL scripts executed / deleted / ignored: 0 / 2 / 12
    Errors occurred during post-handling MSS_SDBP_AFTER_IMP for SDBP L
    MSS_SDBP_AFTER_IMP belongs to package SMSS_TOOLS
    The errors affect the following components:
    BC-DB-MSS (Microsoft SQL Server)
    Post-import method MSS_SDBP_AFTER_IMP completed for SDBP L, date and
    time: 20110114233820
    tp return code: '0008' , tp message: 'A tool used by tp produced
    errors' , tp output:
    This is tp version 376.01.14 (release 701, unicode enabled)
    standard output from tp and from tools called by tp:
    Details of the error situation can also be found in the import logs
    Interrupt the import due to an error situation (14.01.2011, 23:29:48)
    Display detailed informations concerning the error in
    phase 'XPRA_EXECUTION'
    Abort the import due to an error situation (14.01.2011, 23:38:05)
    we already upgrade the kernel, TP, lib_dbsl, r3trans and r3ldctl to the latest patch but
    still having this issue, kindly need your help on this matter
    Thanks & Regards,

    Hi Markus,
      We are running on MSSQL 2008 (non SR2), Microsoft SQL Server Management Studio 10.0.2531.0
    R3trans on Level 121, TP 124, lib_dbsl on 118.
    Thanks & Regards

  • Need to place the SCOM agents in Maintenance Mode automatically during Patching activity

    Hi,
    I have a requirement to place the SCOM agent servers in MM automatically during shceduled patching every month. I have gone through few blogs but could not find an apt solution for SCOM 2012 R2 environment.
    I think the process should be..
     1. Create a management pack to monitor all servers for event 1074 (or/and 22), which gets triggere during the patching
     2. Write some powershell to put a machine into maintenance mode.
     3. Trigger the powershell script to run when needed.
    Any suggestions please?
    Thanks

    Where doing this in our environment. We have a SCOM monitor looking for Reboot events (ID 1074) where the event contains Shutdown Type: Reboot. the monitor creates an Informational alert which Orchestrator picks up and then sets the machine in MM for 30
    minutes. So its any time the machine is intentionally rebooted. You can have it look for CcmExec in the Event description (assuming you're using SCCM) if you only want it to work when being patched. 
    - Slow is smooth and smooth is fast.

  • Deploying 2x Exchange Server 2013 CAS server email traffic high availability during patching & reboot

    Hi people,
    What is the best way to utilize VMware technology to host 2x the Exchange Server 2013 CAS role VM in my production VM to ensure that the email traffic is not halted during server patching ?
    Previously in Exchange Server 2007 I am using Windows NLB (IGMP Multicast) on my ESXi 4.1, now with ESXi 5.1 and 2013 I wonder if there is any better way to make sure that the server failover does not disrupt the mail flow between the Smarthost and the CAS server role.
    Thanks

    Hey AlbertWT,
    Can you clarify exactly what you mean when you say "server patching?"  Do you mean patching at the ESXi host level or something within the guest?
    As you probably know Exchange 2013 CAS no longer needs NLB or even a hardware load balancer.  Due to changes in the architecture, even simple DNS round robin is "enough" to load balance the CAS role.  NLB has its own set of headaches which you are probably all too familiar with so getting rid of that can help remove a lot of complexity from the situation.
    If you can clarify what you mean by "server patching" and "server failover" in your post I think that would be helpful for me to give you a more definitive answer.
    Matt
    http://www.thelowercasew.com

Maybe you are looking for