SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching

Have SCCM 2012 R2 and SCOM 2012 R2 and use the Software Update Patching process for servers. When using the checkbox to "Disable Operations Manager Alerts when this program runs" option have noticed on completion of the job and the target
server is rebooted, a scheduled task appears for a short time titled "SCOM 2007 Agent Resume Task". The task disappears and there is no history to view.
Is this a legacy naming convention from 2007 world when the maintenance mode is turned off from the SCCM patching process?
How do I see the actual code behind the SCCM and SCOM integration with Maintenance mode to validate it.

SCCM should use the following SCOM SDK to do that.
http://msdn.microsoft.com/en-us/library/bb437532.aspx
That's incorrect. There is no API or method to put an OpsMgr agent into maintenance mode on the client itself -- maintenance mode is a centrally controlled feature of OpsMgr. The API/code sample you linked is performing that activity on the management server
which assumes you know the management server name and have permissions to carry out the action -- neither of which is fulfilled by the ConfigMgr agent.
The ConfigMgr agent pauses the OpsMgr client agent service and also unloads the workflows from the OpsMgr agent (it only did the first part in ConfigMgr 2007). This effectively puts the agent in Maintenance Mode (although to my knowledge this is not directly
reflected in the OpsMgr console).
Jason | http://blog.configmgrftw.com

Similar Messages

OEM integration with SCOM 2012

Hi,
Can anyone help me out on the topic- OEM integration with SCOM 2012.

Are you refer to this document
Oracle® Enterprise Manager Installation and Configuration Guide for Microsoft System Center Operations Manager Connector
http://docs.oracle.com/cd/E24628_01/install.121/e28572.pdf
Roger

EM 12C Integration with SCOM 2012

Hi
Has anyone integrated EM12C ( running on Solaris Sparc ) with MS SCOM 2012 ? Just looking for any hints / tips /issues ... etc ...
Any thoughts appreciated.
Regards
Rob

If the integration is along the lines of forwarding events from Enterprise Manager 12c to SCOM, then we are currently finalizing an event connector for SCOM 2012. It will enable the sending of events from Enterprise Manager to SCOM.
Regards,
Ana

Remove SCVMM2012 Integration in SCOM 2012

Hi @all
i had a SCOM 2012 - SCVMM 2012 integration ... and now i re-installed the SCVMM Server with Windows Server 2012 and SCVMM 2012 SP1 ... i thought everything´s fine .. but now i noticed, that system discovery in SCOM 2012 does not work .. and i guess that
is caused by the old SCVMM Integration ...
how can i remove an obsolete scvmm 2012 integration on SCOM 2012 Server ? ...

Hi
Before removing the old VMM server, you really needed to go into Settings and System Center Integrations and remove the SCOM integration. That would have removed the conectors from SCOM as well.
Do you still see all the old VMM Connectors in SCOM?
In VMM, have you tried reconfiguring the SCOM integration? Do you see a green tick or red cross? If not, then try re-adding to see if the new integration will work. You'll also need to upgrade Management Packs in SCOM.
Regards
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/

The problem with forecast reports in SCOM 2012 after integration with VMM 2012

Hello.
I have problem with forecast reports in SCOM 2012 after integration with VMM 2012. All other reports (not forecasting) works fine. For example, report “Host Group Forecasting” don’t work. The report is generated, but I have error: “Subreport
could not be shown”. I find only errors in SQL Server Reporting logs like this:
library!ReportServer_0-13!1758!06/26/2012-18:26:23:: i INFO: RenderForNewSession('/Microsoft.SystemCenter.VirtualMachineManager.2012.Reports/Microsoft.SystemCenter.VirtualMachineManager.2012.Report.ForecastHostGroup')
processing!ReportServer_0-13!1758!06/26/2012-18:26:28:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: , Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Не удалось выполнить
запрос для набора данных "DiskSpaceUsageForecasting". ---> Microsoft.AnalysisServices.AdomdClient.AdomdErrorResponseException: Execution of the managed stored procedure GetTimeSeriesForecast failed with the following error: Exception has been thrown by
the target of an invocation..
Query (5, 58) Parser: The syntax for '6' is incorrect.
   at Microsoft.AnalysisServices.AdomdClient.AdomdConnection.XmlaClientProvider.Microsoft.AnalysisServices.AdomdClient.IExecuteProvider.ExecuteTabular(CommandBehavior behavior, ICommandContentProvider contentProvider,
AdomdPropertyCollection commandProperties, IDataParameterCollection parameters)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.AnalysisServices.AdomdClient.AdomdCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.DataExtensions.AdoMdCommand.ExecuteReader(CommandBehavior behavior)
   at Microsoft.ReportingServices.OnDemandProcessing.RuntimeDataSet.RunEmbeddedQuery(Boolean& readerExtensionsSupported, Boolean& readerFieldProperties, List`1 queryParams, Object[] paramValues)
   --- End of inner exception stack trace ---;
The Russian string “Не удалось
выполнить запрос для набора данных "DiskSpaceUsageForecasting"” is translated to “Could not execute query for data set "DiskSpaceUsageForecasting"”.
I have clean installation SCOM 2012 RU1, VMM 2012 RU1. Integration SCOM with VMM work fine.
SQL collation for all SQL DB instances (SCOM and VMM and SCOM reporting) – “SQL_Latin1_General_CP1_CI_AS”
SQL Analysis service: SQL collation – “Latin1_General” ; language for the server – English (United States)
I think the problem in regional settings. By my opinion there are two possible mistakes:
SQL collation for all SQL DB instances. May be need use “Latin1_General_CI_AS”
as provided by
http://blogs.technet.com/b/momteam/archive/2012/05/25/clarification-on-sql-server-collation-requirements-for-system-center-2012.aspx
Need change regional setting. Question is for what (OS regional setting, SQL Analysis service settings,…) ?

Error: Subreport could not be shown
Opening a report for Client Security might result in the following error being displayed in one or more areas of the report: "Error: Subreport could not be shown."
Background
There are two possible reasons for this error:
1. Wrong location   The reporting server is pointing to the wrong computer running SQL Server or a SQL Server instance.
2. Insufficient permissions   The account configured (in SQL Server Reporting Services) to connect to the reporting database does not have appropriate permissions for the database.
Solution
To determine which reason is causing the error, attempt to directly open the subreport reporting the error, by clicking the name of the subreport.
If the reporting server is pointing to a wrong location, the report displays an error similar to the following:
Error message
An error has occurred during report processing.
Cannot create a connection to data source 'SystemCenterReporting'. Cannot open database "SystemCenterReporting" requested by the login. The login failed. Login failed for user username.
To verify the correct SQL Server computer and instance path
In Report Manager, navigate to the report generating the error and click the Properties tab.
Click Data Sources and under a Shared data source, note the path.
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is: http://hostname/Reports/
If you chose to secure the viewing of reports with HTTPS, the URL is: https://hostname/Reports/
Click SCDW.
In the Connection type list, ensure that Microsoft SQL Server is selected.
In the Connection string box, ensure that the correct SQL Server computer and instance name are entered.
Note:
A period (.) denotes the local computer.
If the account has insufficient permissions, the report displays an error similar to the following:
Error message
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for data set 'DSDashboardComputersTrend'. (rsErrorExecutingCommand) EXECUTE permission denied on object 'prSAS_UX_DashboardComputersTrend', database 'SystemCenterReporting',
schema 'dbo'.
To determine if you are experiencing the SQL Server permissions issue
Open the reporting Web site. If you chose the default virtual directory for reports, the URL is:http://hostname/Reportserver/
If you chose to secure the viewing of reports with HTTPS, the URL is:https://hostname/Reportserver/
Click Microsoft Operations Manager Reporting, click Microsoft Forefront Client Security, and scroll to DashboardComputersTrend.
Click DashboardComputersTrend.
If you are experiencing a SQL Server permissions issue, an error similar to the preceding error appears.
To grant permissions to the SQL Server computer
1. In Report Manager, click SCDW and note the account in the Connect using section. This is the account under which the database is contacted.
2. On the server with the System Center Reporting database, start SQL Server Management Studio.
3. In the tree, expand Security, and then expand Logins. Do one of the following:
If the user account is listed, right-click the account, click Properties, and then go to step 5.
If the user account is not listed, right-click Logins and choose New Login.
4. In the Login name box, enter the user account (domain\username).
5. In the Login Properties dialog box, click User Mapping, and then under Users mapped to this login, select the System Center Reporting check box.
6. Under Database role membership for: System Center Reporting, select the db_owner check box, and then click OK.
Thanks,
Yog Li
TechNet Community Support

Error 10218 while integrating scom 2012 r2 with scvmm 2012 r2

hello,
We are working to integrate the SCOM 2012 R2 With SCVMM 2012 R2 .But while creating connection of integration it got failed with error in job on scvmm as below :
Error (10218)
Setup could not import the System Center Virtual Machine Manager Management Pack into Operations Manager server because one or more required management packs are missing. The VMM Management Packs cannot be deployed unless the following component management
packs are present in Operations Manager :
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
Recommended Action
To provide the missing component management packs, ensure that the following management packs have been imported into Operations Manager server:
Microsoft Windows Server 2003 Internet Information Services Management Pack for OpsMgr 2012 (version 6.0.6278.0 or later)
Microsoft SQL Server 2005 Management Pack(version 6.0.5000.0 or later)
You can download the management packs from the System Center Operations Manager Catalog at http://go.microsoft.com/fwlink/?LinkId=86411
Reference link used :- http://technet.microsoft.com/en-us/library/hh882396.aspx ,We have imported all the required MPs as mention in above link on scom.
Regards
Richa KM

Have you imported all of the packs it mentions:
Windows Server Internet Information Services 2003,
Windows Server 2008 Internet Information Services 7,
Windows Server Internet Information Services Library,
SQL Server Core Library.
There's a good walkthrough
here which details all the pre-reqs.
It was some time ago but i also did a walk-through with pictures
http://myopsmgrblog.wordpress.com/2013/04/23/scom-integration-with-scvmm/
Hope this helps

SCOM 2012 Integration with Solarwinds

Hi Experts,
Currently we are using SCOM 2012 for Server, Application, Network, etc monitoring. Also, we are using Solarwinds Network Performance Monitor(NPM) for network monitoring and Network Configuration Manager(NCM) to perform configuration backup of network
devices as SCOM 2012 does not have this capability.
We are planning to have single consolidated view in SCOM 2012.
Please let us know, how can we integrate Solarwinds NPM and NCM with SCOM 2012.
Any help will be appreciated.
Kumaresan Lakshmanan

It depends. To be honest I never used it myself. If this MP is NOT based on OpsMgr Network Device class(es) - it should work on OpsMgr 2012. It seems like this MP queries a Solarwind product with a connector - this probably should work for 2012 as well.
http://OpsMgr.ru/

Reporting Service Error Code 7403, on SCCM 2012 R2 with SQL 2012 SP1 CU6

Dear All,
I am facing issue to install Reporting Services Point on SCCM 2012 R2 with SQL 2012 SP1 CU6. getting error messages id 7403. please let me know if SQL 2012 SP1 CU6 is supported with SCCM 2012 R2 or not & if you have any solution on it.
Error Message: The report server service is not running on Reporting Service Point server "SCCM2012"; start the service to enable reporting.

I am getting below error msg when trying to browse both sites
1) For Reports
The report server cannot decrypt the
symmetric key that is used to access sensitive or encrypted data in a report
server database. You must either restore a backup key or delete all encrypted
content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from
HRESULT:
0x80090016)
2) For Reportserver
Reporting Services Error
The report server cannot decrypt the symmetric key that is used to access
sensitive or encrypted data in a report server database. You must either restore
a backup key or delete all encrypted content. (rsReportServerDisabled)
Get Online Help
Keyset does not exist (Exception from HRESULT: 0x80090016)
SQL Server Reporting Services

SSRS 2012 integrated with Sharepoint 2013, subscription and impersonation

Hello,
We are configuring SSRS 2012 integrated with Sharepoint 2013. The reports are connecting to SSAS cubes via shared Datasources. We have defined user based roles and security in the cubes and would like to pass the effective username to the cubes when they
access data via reports.
Also we need to create subscriptions on these reports to run on either daily/weekly or monthly schedule and send email to a list of users.
How do we configure our Datasources on sharepoint so both could be acheived.
Our Database and Sharepoint are on different servers.
Thanks
Deepak

Hi Deepak
For your first question:
while configuring the datasource in SharePoint, check the option 'Set execution context to this account' in the settings. This will pass the effective user name to the cubes.
Thanks
Bala

Issue with connection SSRS reportviewer control to SSRS 2012 integrated with SharePoint 2010...

Hi,
I have a .NET application that uses SSRS ReportViewer 2012 control to render reports deployed on SSRS 2012 integrated with SharePoint 2010. I am getting error "the report execution '' has expired or not found". The same code works when I connect
to SSRS 2008 R2 integrated with SharePoint 2007. I investigated the issue and it seems the JavaScript that pings the SSRS server before it expires is missing from rendered HTML.
Let me know if there is a way to fix this issue.
following is the code:
ASPX:
<formid="form1"runat="server">
<rsweb:ReportViewerAsyncRendering="true"
KeepSessionAlive="true"ID="test"runat="server"></rsweb:ReportViewer>
<asp:scriptmanagerrunat="server"></asp:scriptmanager>
</form>
Code Behind:
if(!IsPostBack)
this.Session.Clear();
        test.Reset();
        test.ProcessingMode =
ProcessingMode.Remote;
        test.KeepSessionAlive =
true;
        test.ServerReport.ReportServerUrl =
newSystem.Uri("https://webappname/_vti_bin/reportserver/");
        test.ServerReport.ReportPath =
https://webappname/RS_Reports/REportEngineTest.rdl;
ReportServerCredentialscred =
newReportServerCredentials();
            test.ServerReport.ReportServerCredentials = cred;
report server credentials:
publicICredentialsNetworkCredentials
get
// Use default identity.
returnnewNetworkCredential("user",
"pwd",
"domain");

What's the meaning of webappname, are you mean the sharepoint site?
I think this issue can be caused by the incorrect url. You can refer to the following link:
http://msdn.microsoft.com/en-us/library/ms154497(v=sql.110).aspx
Familyabc

AD RMS 2012 integration with exchange server 2013

AD RMS 2012 integration with exchange server 2013
I would like to have a knowledge About this Topic
1.what is differrent if we use internal SSL certificate with Public Certificate and in this case i would like to use Mobile Phone I eed to import Root Certificate ?
2.Do I have problem? If I start to install AD RMS 2012 with SQL EXpress after that I want to chage it to SQL Server ?
3.when I use SQL Expres what I can do after Disk is full (10 GB)?
4.If AD RMS is down It will affect with email that it is already sent ?
5. Which Edition of outlook can produce IRM protected documents
6. To Use AD RMS Server 2012 through OWA, Outlook and Moblie Phone ,a CAL is required or not ?

Could you post the list of sites:
appcmd list site
The ones listening on port 80:
appcmd list site /bindings:http/*:80:
And on port 443:
appcmd list site /bindings:https/*:443:
Step by Step Screencasts and Video Tutorials

Dell server hardware component monitoring with scom 2012 R2.

hello ..
We have some dell poweredge r710 SFF 2X SIX CORE X5 SAS Servers ,I need to monitor its hardware components with scom2012 R2.I have installed os:windows server hyper-v server on this and windows server core OS management packs on scom and monitoring
working fine .next I want to know their is Latest Management pack available for this dell model server and what are hardware components can be monitored with scom 2012 R 2. I want to monitor Hardware failure such as Power failure ,cpu failure,disk
failure and NIC failure etc
Thanks
Richa

Hi,
Please refer to the User’s Guide of the DELL MP:
http://support.dell.com/support/edocs/software/smconect/msscom/40/en/ug/pdf/Dell_Server_Management_Pack_Suite_v4.0_UG.pdf
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Meanwhile, considering this is related to DELL products, if you need more information or further investigation, please also contact DELL support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Options for monitoring health of SCSM 2012 SP1 using SCOM 2012 SP1

Hi,
I've done some research on how to monitor SCSM using SCOM (version 2012 SP1 for both) and found two options:
Option 1 - Agent-based monitoring. With SCSM2012 SP1, it looks as though the agent is
already present (for upgrades and also for fresh installs). So it follows that SCOM will be able to monitor the health of SCSM.
Option 2 - Agentless monitoring. On the Technet
download page, 'System Requirements' section indicates compatibility with SCOM 2012 and above, and SCSM 2012 and above. Details tab says the following (emphasis mine):
This System Center Management Pack for System Center 2012 - Service Manager should be used to monitor
System Center 2012 - Service Manager, System Center 2012 R2 - Service Manager
and includes monitors for the management server as well as the Data Warehouse server. In this release of the management pack, the Data Access Service, Health Service, Configuration Service, and workflows are monitored.
So it looks like both options are viable, but I'd be interested in hearing other people's experiences of using one vs. the other. Is there any major difference in the information that's provided by agentless vs. agent-based monitoring, or are they just two
different ways of pulling the exact same information into SCOM?
Edit: Just occurred to me that SP1 isn't explicitly mentioned in the Technet article linked above under option 2. Has anyone successfully used agentless monitoring on SP1?

Hi,
Here is a related blog for your reference.
SCSM 2012 SP1 (Beta) – Monitoring Management Servers with SCOM 2012
http://marcelzehner.ch/2012/09/29/scsm-2012-sp1-beta-monitoring-management-servers-with-scom-2012/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Question on upgrading to SCOM 2012 R2 form SCOM 2012 SP1

Hello!
I planned upgrade to SCOM 2012 R2 form SCOM 2012 SP1.
Should I install any or last update rollup package to my SCOM 2012 SP1, before upgrading to SCOM 2012 R2 ?

It is highly recommend that you has install most updated CU before upgrade SCOM 2012 sp1 1 to SCOm 2012 R2 but it is not necessary. You should view NEPA PFE Team blog that demostrate how to upgrade SCOM 2012 SP1 with CU4 to SCOM 2012 R2.
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
Roger

SCOM 2012 License for SCOM 2012 R2

Hi,
I want to upgrade SCOM 2012 SP1 to SCOM 2012 R2. Do I need to have any additional license for this upgrade or SCOM 2012 RTM license will work for R2 as well?

Hi,
I'm afraid you may need the additional SCOM 2012 R2 license after upgrading. Here is the detail information.
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
Niki Han
TechNet Community Support

SCCM 2012 integration with SCOM 2012 - Disable Alerts during patching

Similar Messages

Maybe you are looking for