Session not closing after redirecting from BSP View

Hi All,
I am trying to redirect to a new application (WD ABAP) from an existing BSP View by using
CALL METHOD runtime->server->response->redirect( url = lv_url1 ).
The session still exists in SM04 after redirecting but I want the BSP session be closed.
Any pointers to how this can be done??
"navigation" global object is not recognized in the View it seems because I was thinking of using
navigation->exit (url).
navigation->response_complete().
but it gave complie errors.
Awaiting your suggestions..
Thanks and Regards
Avinash

Please have a look at the BSP application SYSTEM => page => sessionexit.htm

Similar Messages

Sessions Not Closed After 'Execute Unix/Linux SSH Script' Activity

Hello,
Wondering if anyone out there has some experience with running "Execute Unix/Linux SSH Script" activities against a "Unix/Linux System" target and able to help?
We have a process that runs an ssh script on a Unix/Linux target and in the 'Target' tab we specify to open a new session on the target we want. It was our assumption that once the script is executed successfully that the session would be closed, however, that does not appear to be the case. It seems the target receives a "disconnect" from CPO but if we run "who -a" on the host, the session still exists. We are trying to run our activity/script in a while loop with a 60 second pause in between, and after 30 loops (30 minutes) the next call fails.
What appears to be happening is, the session opens on the Linux target and every occurrence of the "Execute Unix/Linux SSH Script" activity is merely connecting and disconnecting using the same session that was originally opened. But after the 30 minute idle timeout on the Linux host, the session is closed and the next occurrence of the SSH Script activity fails with the following error:
This activity xyz did not return within the expected time period and was abandoned.
Is there a setting in the target properties or activity properties that we're missing here??
Thank you for any feedback or suggestions that may be out there!
Neil

Neil,
I will discuss with you through email to find what exactly happened in your case.
Thanks,
James

Sessions not closing after timeout

I'm having trouble where my sessions aren't closing after the
60 minute timeout. I'm checking to see how long the sessions are
staying open, and they are staying open past the 60 minute timeout
I have defined. Is there somewhere else I need to modify something
to get them to end?

Did you try changing that 60 to something like 10 minutes
just to rule that out as a bug?
Here's an small Application.cfc that works using cflogin with
a timeout if this is of any use to you
<cfcomponent>
<cfset This.name = "yourappname">
<cfset This.Sessionmanagement="True">
<cfset This.loginstorage="session">
<cffunction name="OnRequestStart">
<cfargument name = "request" required="true"/>
<cflogin idletimeout="5">
<cfif NOT IsDefined("cflogin")>
<cfinclude template="loginform.cfm">
<cfabort>
<cfelse>
<cfif cflogin.name IS "" OR cflogin.password IS "">
<cfoutput>
<h2>You must enter both the User Name and Password
fields.
</h2>
</cfoutput>
<cfinclude template="loginform.cfm">
<cfabort>
<cfelse>
yourldap lookup
<cfif loginIsGood>
<cfloginuser name="#cflogin.name#"
Password="#cflogin.password#" roles="">
<cfelse>
<cfoutput>
<H2>Your login information is not
valid.<br>Please Try again</H2>
</cfoutput>
<cfinclude template="loginform.cfm">
<cfabort>
</cfif>
</cfif>
</cfif>
</cflogin>
</cffunction>
</cfcomponent>
loginform.cfm
<H2>Please Log In</H2>
<cfoutput>
<form action="#CGI.script_name#?#CGI.query_string#"
method="Post">
<table>
<tr>
<td>user name:</td>
<td><input type="text"
name="j_username"></td>
</tr>
<tr>
<td>password:</td>
<td><input type="password"
name="j_password"></td>
</tr>
</table>
<br>
<input type="submit" value="Log In">
</form>
</cfoutput>

Session autmatically destroy after redirect from paypal accout to my site.

I am facing automatically session lost issue with firefox.
I have integrated paypal gateway in mysite. When redirect from payapal to mysite, session lost.
Its working correctly with google chrome.
Technology : Php (5.3)
Firefox version : 32.0

You can try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
http://forums.mozillazine.org/viewforum.php?f=25 <br />
You'll need to register and login to be able to post in that forum.

How to pass on variables while redirecting from BSP to HTML page.

Hi all,
I have two BSP pages - BSP1, BSP2. When I click a submit button on BSP1, it should call BSP2 wherein BSP2 will work silently behind the scenes and redirect some variable values through hidden form fields to BSP1 back.
User will not see BSP2 in fact. He just deals with BSP1, but when he clicks the submit button on BSP1, it silently calls BSP2, and then BSP2 will process something behind the scenes and sends back values through hidden form fields to BSP1 by means of redirection. After redirection from BSP2 to BSP1, I am not getting the hidden fields in BSP1. From the BSP1, I am trying to get the hidden fields of BSP1 using:
Here is how my code in BSP2 (redirecting to BSP1) looks like:
<b>BSP2 : Layout:</b>
<input type="hidden" name="hf1" value="vicky">
<b>BSP2 : OnInitialization:</b>
response->redirect( url_BSP1 ).
navigation->response_complete( ).
But when I am doing this, the hidden form fields from BSP2 are not being passed to BSP1 back.
I am trying to get the form values <b>in BSP1</b> as below:
<b>BSP1 : Layout:</b>
   <%
   data: hfield type string.
   hfield = request->get_form_field('hf1').
   %>
I even tried the above code in onRequest, and onInitialization sections. But I am getting nothing.
Please give me some ideas on how to deal with the redirection and get the hidden values out of that.
Thanks in advance.
Cheers,
Vicky.

Hi,
There are different ways to do it, but let's pick this one. It closes the popup. If you need additional things to be done, you can make a form with all hidden fields, submit that form, do the same close and do whatever you need in the inputprocessing
<html>
<head>
<title>title</title>
      <script language="javascript">
          function init() {
          <%if count eq 1.%>
              opener.document.form.F<%=field%>.value = '<%=value.%>';
          close();
         <%else.%>
      <%endif.%>
      </script>
</head>
<body onLoad="init();">
</body>
</html>

IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus. How can I get the notifications working?

Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

File- Export not working after upgrade from 11i to R12

Hi,
File -> Export not working after upgrade from 11i to R12.1.3 in few systems. Can you please let me know what could be the issue.
If export record count more than 200 it is working fine in all the systems and if change the profile option "Export MIME type” value to ‘text/tab-separated-values’ from application/excel also it is wokring.
Thanks and Regards,
Jagadeesha

Enabled the FRD. Below are few last lines. Can you please let me know what i can in this log file contents.
In Argument 1 - Type: String Value: global.frd_debug
Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
In Argument 0 - Type: Integer Value: 196613
In Argument 1 - Type: Number Value: 54
Out Argument 0 - Type: String Value: 12
Executing COPY Built-in:
In Argument 0 - Type: String Value: Entering app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing FIND_MENU_ITEM Built-in:
In Argument 0 - Type: String Value: FILE.EXPORT
Out Argument 0 - Type: Integer Value: 19
Executing GET_MENU_ITEM_PROPERTY Built-in:
In Argument 0 - Type: Integer Value: 19
In Argument 1 - Type: Number Value: 79
Out Argument 0 - Type: String Value: TRUE
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_menu.set_prop.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_synch.menu_toolbar_sync. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.APP_CUSTOM_MODE
Out Argument 0 - Type: String Value: NORMAL
Executing COPY Built-in:
In Argument 0 - Type: String Value: NULL
In Argument 1 - Type: String Value: GLOBAL.OUT
Executing USER_EXIT Built-in:
In Argument 0 - Type: String Value: FND GETPROFILE NAME="UPK_RECORDING_ENABLED" FIELD="GLOBAL.OUT" N
FNDCPVCM, 11, Built-In, Entry, 316509814, USER_EXIT
FNDCPVCM, 11, Built-In, Exit, 316509814, USER_EXIT
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: GLOBAL.OUT
Out Argument 0 - Type: String Value: N
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_form
Out Argument 0 - Type: String Value: FNDCPVCM
Executing NAME_IN Built-in:
In Argument 0 - Type: String Value: system.current_block
Out Argument 0 - Type: String Value: MASTER
Executing GET_APPLICATION_PROPERTY Built-in:
In Argument 0 - Type: Number Value: 75
Out Argument 0 - Type: String Value: IHR40P
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed call_all_libraries. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
Executing COPY Built-in:
In Argument 0 - Type: String Value: Completed app_standard.event. Event is WHEN-NEW-ITEM-INSTANCE.
In Argument 1 - Type: String Value: global.frd_debug
FNDCPVCM, 10, Prog Unit, Exit, 316509814, /FNDCPVCM-3/P45_30_DEC_201223_28_33
FNDCPVCM, 9, Trigger, Exit, 316509814, WHEN-NEW-ITEM-INSTANCE
FNDCPVCM, 8, Prog Unit, Exit, 316509814, /DMU-4/P8_30_DEC_201223_23_12
# 15 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301498413820
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3
# 16 - FNDCPVCM:MASTER.USER_CONCURRENT_QUEUE_NAME.1359399301512613925
WINDOW FNDCPVCM PROGRESS_INDICATOR RESIZE 4198 1500 3

Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

I am running
Windows 7 64 bit
Access 2010 32 bit
Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
Then again, if the form has several subforms they might be slowing up the loading time.
Bill Mosca
www.thatlldoit.com
http://tech.groups.yahoo.com/group/MS_Access_Professionals

Auto brightness does not work after upgrade from iOS5 to iOS6 on my iPod touch. Is this intended by Apple, or is it a bug?

I attempted to ask this question, yesterday. However, I am not used to typing with my thumbs, yet, and messed it up some. So, I will give this another try. Auto brightness does not work after upgrade from iOS 5 to iOS 6 on my iPod touch. Is this intended by Apple, or is it a bug?

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
iOS 6 changed how that feature works.

Sql is not working after changing from MsAccess into sql server

Following Sql is not working after changing from MsAccess into sql server.
sum(trn.sales) as sales,
sum(trn.cost) as cost,
sales - cost as profit // Here is not working . can we not use sales a column. Please advise
from trn
Kind Regards
pol
polachan

It will not work if use two different column from the table or column from two different table
Example
sum(trn.sales * trn.rate) as salesAmount,
sum(trn.cost) as cost,
sum(trn.salesAmount)-sum(trn.cost) as profit ----- Here is not working . can we not use sales a column. Please advise
from trn
Regards
polachan

Backend BSP session not closing on server after closing the window

Hi All,
We have SAP EP (7.0 SP21) and there is a BSP transaction ivew (Interaction Center ) intergrated in the portal. The issue is when the user performs any transactions inside the BSP and then closes the browser, session remains on the server till the timeout. Is there a way to end those sessions on server after closing the browser immediately?
Portal domain : xx.mycomp.com
ABAP system domain :mycom.com
Should the domains be same for the DSM of Portal to work or is there any solution that can be considered.
regards
Uday

Hi Uday,
These are the main issues that can cause issues with DSM:
JavaScript Origin Policy:
Scripting
between different domains is not allowed because of “JavaScript origin policy”.
Also
communication between mixed protocols (http\https) is forbidden.
Therefore
the portal server and the content server must be on the same domain and must
use the same protocol.
For
detailed explanation see:
http://mozilla.org/projects/security/components/same-origin.html
Popup Blocker:
•Popup blockers may cause troubles
in relation with SRA feature.
•Terminator handles notifications in
new window when current window is being destroyed (logoff, closing browser
window) – popup blocker prevents the opening of new window, hence no session
handling performed.
please also check SAP Note #596698 for more information typical problems and troubleshooting.
In general, the 2 domains should be the same.
xxx.mycomp.com, meaning that first part of the url can change but what comes after should be the same domain.
Best regards,
Etay

Why the photo app is not closing after i finish, when i take a picture accessing directly from home screen. the location is draining my battery if I'm not closing the app by double click home button. in iOS 6 was not like this

When im taking a picture directly from home screen after im finished the application remain open. This app is ussing the location and if im not closing like other applications by doble click the home button the batery will finished fast. On the other IOS 5 and 6 was not neccesary to unblock the phone and bouble click the home bottom.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

The TCP/IP connection does not closed after a VISA close

I am using the VISA functions to communicate with a Sorenson SGA power supply from a Windows XP computer. I have the VISA TCPIP Resource defined in MAX and use this alias name in the VISAResourceName for the input to the VISA Open. Then I write a SCPI command, such as *IDN?, and read the repsonse. Then I close the VISA session. When I look at the TCP statistics using the netstat -n command, I get the following response:
Proto           Local Address                 Foreign Address    State
TCP            10.10.10.9:3881              10.10.10.1:111       TIME_WAIT
TCP            10.10.10.9:3882              10.10.10.1:111       TIME_WAIT
If I query the ID again, I get 2 more TCP connections with different local ports numbers. Every time I perform the query, I get 2 more TCP port connections at different local ports. It takes about 1 minute for the TIME_WAIT's to time out. If I query the Sorenson enough, I can fill up my allowable local port connections.
1) Why doesn't the TCP connections go away after the VISA Close?
2) Should I be opening and closing the VISA session every time I want to talk to the Sorenson?
3) What does the VISAResourceName control or constant actual do to resolve the alias into a IP?
This Sorenson power supply does not seem to be very quick to repsond to TCP requests. If I set the timeout on the VISA Open to anything less the 100ms, I cannot get a session open every time. It will fail about 50% of the time.
Has anyone had experince talking to the Sorenson power Supplies using VISA TCPIP?
Thanks,
Julia

Hi Julia,
Let me try answering your questions here.
1) I'm actually currently looking into this to see if this is expected behavior, and I'll definitely post back to let you know what I find.
2) You do not need to close a VISA session everytime you want to communicate with the device, you can leave the same session open and keep using that session, instead closing it out at the end.
3) The VISA aliases and what they correspond to are stored in a visaconf.ini file. There is more information about this file and where it is located on your hard disk in this KnowledgeBase article here. This visaconf.ini file is checked to see what the actual resources being looked up are.
Let me know if I answered your questions, I will write back with more information on question 1.
Rasheel

ViClose session not called after Read operation Timeout in an IVI COM driver

Hi everybody
I have a small VI sample that is initializaing an IVI COM driver for an OPM instrument, set some parameters into the instrument then is doing a single Read power measurement. My Read operation receives a single parameter called MaxTimeout that user could change depending on his own interest. Inside the Read function I change temporarily the VISA query timeout to user timeout but at the end of Read operation the original VISA session timeout is reverted to its original value before Read operation was called. If the Read operation timeout is long enough for the Read operation to complete ( 100 ms or more) the VI is doing its job and when finished the viClose is called twice for DefaultHandler and for OpenHandler.
If the Read operation timeout value decrease ( 50 ms) then Read operation could not be completed and a Read Operation Timeout error is thrown from inside this method. This error is then propagated trough Error path until the VI end in a Simple Error Handler. Now on my VI I close all open references to my driver interfaces but I don't know why VISA itself is not calling viClose on the DefaultHandler and OpenHandler as in the case when was no VI error. I could see all these diferences in my NI Spy window and I could post this if that could be of any help. Bear with me cause I am more a C, C++, VB programmer and much less of a LabVIEW programmer. BTW the Error Handling from LabVIEW looks a a little weird and the only sure thing is that I wired in Error In and Error Out path in all my VI calls. What kind of error handling should I perform on the Read method in order for VISA to close properly both OpenHandlers even if there is an error in my VI?
Thansk
sorinvalea

So viClose is not called by VISA after an error takes place in a VI that is calling some operations on an IVI COM driver.
I discovered that all VI sessions opened trough VI that encountered a timeout error in Read operation and that were not properly closed after VI completed are in fact viClose by the LabView itself when I am closing LabVIEW application.
So these left over open vi sessions are kept aside by LabVIEW until it closes itself and then clean them one by one by calling viClose on them....

ODI Procedures not working after upgrading from 10G to 11G

Hello Gurus,
We have run into a scenario where the procedures in ODI are not working after we upgraded it from 10G to 11G (11.1.1.6). However we can make it to run if we create the procedure from scratch.
Also we are having issues related to packages where in the packages were running before we applied the patch 11.1.1.6.3. And after applying the patches they are not running.
Any help will be appreciated.
Thanks

If you want someone to help you, please be elaborate in the exact errors you are getting.
A general statement would do nothing but guess work.
What is the error that you get while executing the procedure.
What are the exact issues that you get while executing packages ?

Session not closing after redirecting from BSP View

Similar Messages

Maybe you are looking for