Session reload

I have a 2 files
A and B
file A is a form that sends form details to JSP File B.
File B uses an include usebean tag to call bean to validate the form.
If error in form {
forward back to form File A
in form A
use the session of the include usebean tag
if
If error in form {
display which part of the form has errors
The problem I am having is when the form is know filled correctly and sent back to JSP file B I still get the error in the form. I suspect this is because file B still keeps the session. How can I disable/reset the session if the form is resent.

There was a cut and paste error in my previous reply. It should actually read:
Most likely, you are using session scope for your bean. Instead, use request scope. This will ensure that all error information are carried for only the current request. When you do a JSP forward, it is still the same request.
Use session only for information that you want to store across requests.

Similar Messages

All tabs from prevoius session reload,

no tab manager add-on/ext. Have startup set to "open a blank page" Has happened last 3-4 updates (just updated again).
Thx

You can check if you have a user.js file in the Firefox profile folder that sets the browser.sessionstore.resume_session_once pref to true.
*http://kb.mozillazine.org/browser.sessionstore.resume_session_once
You can use this button to go to the currently used Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox

How Session based web Application should work even after session expiry??

I am looking for an experts opinion that how could I develop an application that should work after the expiry of web session too in the same way as it works in web session.
How the session should be activated.
As I understood, what if I store all the required information in xml and then on unlock session reload all the information from XML.
Am I right or is there any other better way to do using servlets.
Basically I need to implement Lock and UnLock mechanism in an application.
Thanks

I'm not sure I understand your question. But since no one answered this yet, here is my idea:
If the user's session expires, any unsaved data is lost. The user should expect this.
If do need to save any data, normally you store it it a database table with the user's ID so you can retrieve it. Two free databases are Oracle Lite and MySql. However, this will take quite a bit of time to learn if you are not already familiar with databases. Storing it in a database and retrieving it is much much faster than storing it in a file.

Studio 12.4 tarball install can't compile programs on Linux

Hi,
I just installed the tarball for 12.4 in /opt. I have previously used Studio 12.3, 12.2, and 12.0.
Problem #1 command line C and Fortran compilers fail
The IDE can compile and build an application but the command line compilers (C and Fortran) both fail:
EDIT: The IDE didn't build the project from existing code either. I was fooled by the fact dmake ran but it actually ignored my makefiles and did nothing. I got no error messages and the executables ran, so I ASSumed everything was ok. It now appears the tollowing error (Problem #2) below affects the IDE and command line tools and nothing works at all.
user@sys:~/devel/C/hello$ cc -V
cc: Sun C 5.13 Linux_i386 2014/10/20
user@sys:~/devel/C/hello$ which cc
/opt/solarisstudio12.4/bin/cc
user@sys:~/devel/C/hello$ cc -o hello hello.c
"hello.c", line 4: internal compiler error: DBGGEN ERROR: FILE="../src/dbg_libdwarf.c", LINE=31, Could not load dwarf library: libdwarf.so : libelf.so.1: cannot open shared object file: No such file or directory [DBG_GEN 5.5.0]
cc: acomp failed for hello.c
user@sys:~/devel/C/hello$
Problem #2 building a project using the wizard:
Yesterday I was able to get the IDE to build one of my Fortran apps from existing source. Today I tried using the wizard to build a C project from scratch.
I chose C/C++/Fortran application.
Next
It shows CppApplication_1
Finish
I expand source files to edit main.c
after a few seconds I get a popup that says
Project
/home/user/SolStudioProjects/CppApplication_1
metadata was modified in file system and in current session
Reload the project from disk and
override current changes to the project settings?
If I select no I get warning icons on the filename and Studio refuses to open it in edit. If I delete the project from /home/user/SolStudioProjects and start all over again and answer yes instead of no here, the entire project has a warning on it, nothing expands and when I look in the CppApplication_1 folder in /home/user/SolStudioProjects it's completely empty.

SFV написал(а):
Because your libelf is not .1 but rather .0.8.
Linux is a multi-faced beast so we do not dare to support all of its variances.
Besides the difference in system libraries (that you just hit) various flavours of Linux have rather huge variety in their linker versions/behavior
which is especially painful for C++ compiler which needs quite a bit of linker magic.
Anyway, you may get around your particular problem by installing a newer libelf on your system.
Not that there is any guarantee it will not get broken some other way
regards,
Fedor.
But Libelf 0.8.13 is latest build from http://www.mr511.de/software/english.html
However RedHat uses Libelf from https://fedorahosted.org/elfutils/

Create representation error

Hi,
I try to create a model and a representation. However, I get an "Could not find a session for model element System[TRANSIENT]" error. This is the code I use for the creation:
final ResourceSet resourceSet = new ResourceSetImpl();
final Resource systemResource = resourceSet.createResource(systemURI);
final System newSystem = SystemFactory.eINSTANCE.createSystem();
newSystem.setEntityName(NEW_SYSTEM_NAME);
systemResource.getContents().add(newSystem);
systemResource.save(Collections.EMPTY_MAP);
progressMonitor.worked(50);
if (representationName != null) {
final URI representationFileURI = URI
.createPlatformResourceURI("/" + systemURI.segment(1) + "/representations.aird", true);
final Session session = SessionManager.INSTANCE.getExistingSession(representationFileURI);
if (session == null) {
throw new RuntimeException("Not a modelling project");
Viewpoint systemViewpoint = null; // FIXME expose with a constant
for (Viewpoint possibleViewpoint : session.getSelectedViewpoints(true)) {
if (ComposedProvidingRequiringEntityEditorConstants.SYSTEM_DESIGN_NAME.equals(possibleViewpoint.getName())) {
systemViewpoint = possibleViewpoint;
break;
if (systemViewpoint == null) { // FIXME expose with a constant
throw new RuntimeException("No suitable Viewpoint is registered");
RepresentationDescription representationDescription = null;
for (RepresentationDescription possibleRepresentationDescription : DialectManager.INSTANCE
.getAvailableRepresentationDescriptions(
Collections
.singleton(systemViewpoint),
newSystem)) {
representationDescription = possibleRepresentationDescription;
break;
if (representationDescription == null) {
throw new RuntimeException("No suitable RepresentationDescription has been found");
DRepresentation representation = DialectManager.INSTANCE.createRepresentation(representationName,
newSystem, representationDescription, session, progressMonitor);
DialectUIManager.INSTANCE.openEditor(session, representation, progressMonitor);
I already searched the forum for solutions but the ones that have been posted did not work for me. Do you know what I am doing wrong?

Hi Jim,
Le 29/07/2015 09:15, Maxime Porhel a écrit :
> Le 29/07/2015 01:04, Jim S. a écrit :
>> Hi,
>>
>> I try to create a model and a representation. However, I get an "Could
>> not find a session for model element System[TRANSIENT]" error. This is
>> the code I use for the creation:
>>
>> final ResourceSet resourceSet = new ResourceSetImpl();
>> final Resource systemResource = resourceSet.createResource(systemURI);
>
> Why do you not use the resource set of your current session ?
You could use your own resource set to create and populate and save your
resource.
But you have to make sure the session reloaded it.
In a standard environment, the workspace will detect that you modified
the file and Sirius will reload the modified resources for each session
using this file.
>
>>
>> final System newSystem = SystemFactory.eINSTANCE.createSystem();
>> newSystem.setEntityName(NEW_SYSTEM_NAME);
>> systemResource.getContents().add(newSystem);
>>
>> systemResource.save(Collections.EMPTY_MAP);
>> progressMonitor.worked(50);
>>
>> if (representationName != null) {
>> final URI representationFileURI = URI
>> .createPlatformResourceURI("/" + systemURI.segment(1) +
>> "/representations.aird", true);
>> final Session session =
>> SessionManager.INSTANCE.getExistingSession(representationFileURI);
>
> Did you already open the session ?
>
>> if (session == null) {
>> throw new RuntimeException("Not a modelling project");
>> }
>> Viewpoint systemViewpoint = null; // FIXME expose with a constant
>> for (Viewpoint possibleViewpoint :
>> session.getSelectedViewpoints(true)) {
>> if
>> (ComposedProvidingRequiringEntityEditorConstants.SYSTEM_DESIGN_NAME.equals(possibleViewpoint.getName()))
>>
>> {
>> systemViewpoint = possibleViewpoint;
>> break;
>> }
>> }
>> if (systemViewpoint == null) { // FIXME expose with a constant
>> throw new RuntimeException("No suitable Viewpoint is
>> registered");
>> }
>> RepresentationDescription representationDescription = null;
>> for (RepresentationDescription possibleRepresentationDescription :
>> DialectManager.INSTANCE
>> .getAvailableRepresentationDescriptions(
>> Collections
>> .singleton(systemViewpoint),
>> newSystem)) {
>> representationDescription = possibleRepresentationDescription;
>> break;
>> }
>> if (representationDescription == null) {
>> throw new RuntimeException("No suitable
>> RepresentationDescription has been found");
>> }
>>
>> DRepresentation representation =
>> DialectManager.INSTANCE.createRepresentation(representationName,
>> newSystem, representationDescription, session,
>> progressMonitor);
>
> newSystem comes from the resourceSet created by you and not from the
> resourceSet of your session.
>
>> DialectUIManager.INSTANCE.openEditor(session, representation,
>> progressMonitor);
>> }
>>
>> I already searched the forum for solutions but the ones that have been
>> posted did not work for me. Do you know what I am doing wrong?
>
> Regards
>
Maxime - Obeo
Need professional services for Sirius?
http://www.obeodesigner.com/sirius

Can't load Google Calendar in existing session tab - constantly loading/reloading/re-directing

Please always include:
Operating system (e.g. WinXP): Win XP Pro
Program and version you use to access Google Calendar (e.g. Internet Explorer 7 or Outlook 2003): Firefox (just updated this morning to 3.6.7 and it still isn't working)
Any Sync software you're using or have used (e.g. Google Calendar Sync): Not using
If you're using the non-Apps version of Google Calendar (accessing from google.com/calendar/render) or you're on Google Apps: non - Apps version
If you have any Labs (and which ones) or Offline enabled: I do have both labs (Skip to date, next available reschedule, Year view theme, probably others I don't remember), and Offline enabled
I think it has to do with both google and firefox. I have Google Calendar open in one of my many tabs that open during a session (when I load my last session) as well as other google products. This seems to have been only happening in the past few weeks (or last couple of firefox updates not sure if it is related)
The google calendar tab just stays on a white screen for me and loads and then reloads and then reloads. When I had the accessibility option selected in firefox to warn me when I site tries to redirect. I was able to click allow and it would load. That was annoying on other sites including opening links so I turned that off. I tried turning that back on and that doesn't seem to have helped so I turned it back off again.
I thought it might be helpful to show the web link as well. It looks like I am actually accessing the non-apps version
https://www.google.com/accounts/ServiceLogin?service=cl&passive=1209600&continue=http://www.google.com/calendar/render?tab%3Dmc&followup=http://www.google.com/calendar
At the bottom it says waiting for google.com, then switches very quickly between that and stopped, transferring in no discernible pattern.
I also tried another users suggestion and logged in to igoogle and then signed out there. That allowed me to see the login page on the calendar tab but it won't let me sign in because it is reloading/redirecting too quickly for me to get my password in.
The only way I have found it to close the existing tab that opens with the session and open it in a new tab from another google product as if I was just opening it for the first time. Then I don't have any problems. I updated my firefox today to 3.6.7 hoping that would fix the bug but it didn't so I am posting here. All of these solutions have been work around solutions and I hope that google and/or firefox can fix the issue soon.
It should be noted as well that the goggle calendar widget on the igoogle page is also having issues loading saying the following (below in italics).
"This Connection is Untrusted - You have asked Firefox to connect securely to 11.ig.gmodules.com, but we can't confirm that your connection is secure. Normally, when you try to connect securely, sites will present trusted identification to prove that you are going to the right place. However, this site's identity can't be verified.
What Should I Do?
If you usually connect to this site without problems, this error could mean that someone is trying to impersonate the site, and you shouldn't continue.
Technical Details
11.ig.gmodules.com uses an invalid security certificate.
The certificate is only valid for the following names: *.googleusercontent.com , googleusercontent.com , *.commondatastorage.googleapis.com , commondatastorage.googleapis.com , atgglstorage.com , *.atgglstorage.com , *.s.atgglstorage.com
(Error code: ssl_error_bad_cert_domain)
I Understand the Risks
If you understand what's going on, you can tell Firefox to start trusting this site's identification. Even if you trust the site, this error could mean that someone is tampering with your connection. Don't add an exception unless
you know there's a good reason why this site doesn't use trusted identification.
== URL of affected sites ==
https://www.google.com/accounts/ServiceLogin?service=cl&passive=1209600&continue=http://www.google.com/calendar/render?tab%3Dmc&followup=http://www.google.com/calendar

Welcome. These Apple Support Community forums are for users helping users and sharing solutions. Apple doesn't provide support directly through these forums. If you do need to contact Apple Support directly, you can go here http://www.apple.com/support/ and start by selecting the product or software, visit your local Apple Store, or get phone numbers from this page http://support.apple.com/en-us/HT201232

My problem is that I am working on a page and then I receive ....Error saving the journal. Perhaps your session has expired-try reloading the page".

My problem is that I am working on a page and then I receive ....Error saving the journal. Perhaps your session has expired-try reloading the page". I used to receive from Firefox when reloading page...To display this page, Firefox must send information that will repeat any action'. Now I don't receive this message and I lose info that was entered. How do I get this to pop up again so I can save my messages.
Using Firefox 22.0 u to date

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You get an alert about resending POST data if you go back to a page or refresh a page that was previously requested from the server by submitting form data via a (hidden) POST form. 
Firefox can only make sure to get the same page by resending that POST form. 
Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time. 
A way to prevent this pop-up about resending POST data is not to use the Back button, but to open links on a page requested from a server by sending a form with POST date in a new tab (window) with a middle-click or a Ctrl + left-click.

Dynamic reloading in iWS 6.0 causes my http session to be lost

Hi,
I have a problem with dynamic reloading in iWS 6.0 Sp2 on Solaris 8. I have not set the reload-interval for the class-loader, in fact i haven't included anything related to the classloader in the web-apps.xml file.
The default behaviour is observed, the classes are reloaded every 30 seconds. So far, so good.
I have seen that if a change a class, iWS reloads the entire application, destroying all the servlets in it. This destroys my HTTP session.
The same behaviour is observed in a redeployment, and in a reloading of config files.
Is there any way of avoiding this?
Thanks.
By the way, could anyone describe the classloader architecture of iWS.
Juan

Scott,
Does the problem only occur on MSIE clients? Do this work properly on Communicator? If so, you may be running into a problem with how MSIE determines the maxage for a cookie.
The criteria that IE uses for creating a new session is the length of time that a session has been alive. For this reason, when a user tries to connect to a web application on the iWS webserver through IE, the time on the client server and on the webserver must be set correctly. Otherwise, the user could experience problems with session data getting lost or discarded by the client.
This problem does not occur on Netscape browsers, as Netscape browsers set the cookie using the client-side clock and the maxage sent by the server.
Refer to this technote and see if the helps:
http://knowledgebase.iplanet.com/ikb/kb/articles/4704.html

Newbie : JSP session problem after reload with IE refresh button.

Hi,
I had an issue with JSP reloading using tomcat 4.* and IE.
I have a jsp1.jsp is opened in two different IE windows(one by one). Once i refreshed using IE refresh button from the first window, its loaded with second windows session details. Its changess whole http request object with second window.
Am not sure , why its happening ? Could anybody shed light on this ?
Thanks and Regards
PV

Hello,
No, am not saving any form details . But i noticed session id is changing completely for the first window once i loads frame on the second window.
javascript:alert(document.cookie) Above scriptlet (IE address bar) returns session id from the second window rather than current window without refreshing, that means, its removed whole request completely or somehow manipulated previous sessions. Can anybody explain this behaviour ?
Thanks

10000: PPPoE session recovery after reload

Hi.
We have seen that there are a feature that recover the PPPoE sessions closed in one side and up in the other. This feature is called 'PPPoE Session Recovery After Reload '.
In the feature navigator, we can see that this feature is available for 7200 series. It seems not available for 10000.
But in the release notes of Cisco IOS 12.3(7)XI3,
http://www.cisco.com/en/US/partner/products/hw/routers/ps133/prod_release_note09186a008040929e.html
appears this bug as resolved:
CSCsa46626
PPP PADT messages are not sent by a PPPoX PTA router to a client when the PPPoX user is no longer connected to the PPPoX PTA router.
This feature is enabled only within the BBA Group configuration using:
bba-group pppoe pppoe1
sessions auto cleanup
This issue can occur when a Cisco 10000 Series router is used as a PPPoX PTA router, and there has been a network flap causing the PPPoX users to lose their connections. PPPoE will experience this issue when BBA Groups are in use. VPDN Group configuration does not support this feature.
There are no known workarounds.
We have tested the IOS 12.3(7)XI6, but the router (10000) doesn't send the PADT (auto cleanup). In 7200, it works correctly.
Anyone have has this problem?
Anyone can confirm if this feature is supported?
Regards.
Jose

Hi Jose ,
I checked it using feature navigator and noticed that cisco 10000 doesn't support ""PPPoE Session Recovery After Reload"" feature.
The following platforms support the feature.
1700
1800
2600
2800
3200
3600
3700
3800
7200
7301
7400
Thanks,
satish

How to disable Refresh,Reload in browser and user should not allow to multiple browser sessions ?

Dear All,
How to disable Refresh,Reload in browser and end user should not allow to multiple browser sessions in portal.Where we need to configure the settings or any code in masthead or any other component. My server version is 7.4 - SP5 .Please help us.
Thanks for advance,
BR,
Durga Rao.

Dear all,
i am able to logoff the click refresh button on keyboard.I am using this code to log off the user into the portal.
document.onkeydown = function(e)
var key;
if (window.event) key = event.keyCode
else
var unicode = e.keyCode ? e.keyCode : e.charCode
key = unicode
switch (key)
{ //event.keyCode
case 116: //F5 button
LSAPI.sessionPlugin.logoff();
event.returnValue = false;
key = 0; //event.keyCode = 0;
return false;
case 82: //R button
if (event.ctrlKey)
LSAPI.sessionPlugin.logoff();
event.returnValue = false;
key = 0; //event.keyCode = 0;
return false;
case 91: // ctrl + R Button
LSAPI.sessionPlugin.logoff();
event.returnValue= false;
key=0;
return false;
Thanks.
But i am unable to control the multiple windows opening the browser.So any one can tell me the how to block the new window and new tab/duplicate tab option.
BR,
Durga Rao.

When in the middle of doing work Firefox just crashes, A sorry window pups up asking if user wants to Reload the same session or start a new session. This never happen with previous versions.

Since I updated Firefox to the latest version it crashes a lot and although I can reload the session I was working with it is annoying and time consuming. I always keep my computer 100% updated and virus free as I always run Norton. I also have 4 G of RAM and 500 G disk drive so it is not lack of RAM and never keep more that 3 windows open at the same time.

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

PSA SE 3 fails to reload in same computer session!!!

hey everyone ... or those interested enuf to visit this thread :)
i have an issue:
if in the same computer session, i open this app then close it [ctrl-k, exit or X], it fails to reload a 2nd time [a process instance flashes in task manager but the instance doesn't run].
tm already shows a process instance from my 1st use of the app, if i click 'end process' it doesn't end but by 'end process' i can reload the app.
a 2nd process runs in tm for the 2nd use of the app [the number of process instances concurs with the number of times i have used the app during the same computer session].
i must click 'end process' in tm for EVERY instance before i can again reload the app [lets say i've used the app 7 times during that same computer session, then i must 'end process' the 7 instances in tm BEFORE i can open the app again [thus resulting in another process instance].
can anyone help me with this issue!??!? i've logged a bug report and i'm disgruntled to learn that i won't get a response from them!!! *salutes adobe*
i have a couple more issues [all since upgrading/updating to reader 7.5 and this app and i might have to rely on your collective heads to get it solved cos i doubt i'll get any relief from sending bug reports [after all, it could be my installation]. i have uninstalled and reinstalled a number of times to try and sort it out myself, but i am failing and i'm beginning to lose patience.
thanks and best regards
rox

:)
thank you for your reply ... i very much appreciate it *smiles again*
i've actually uninstalled the damn thing ... as i have done also with adobe reader [7.0.5 or something ... the current version anywayz] anticipating that uninstalling AND reinstalling the reader only would cure my ills ... UNFORTUNATELY, it didn't ... everytime i USE the reader, it too refuses to open if i *need* it during the same computer session AND it jams my log off/shutdown ... its another 'task manager ... end process' issue too ... methods of closing the program mess with my computer :/ ... so annoyed!!!
this situation however i will reserve for an independent [sp???] thread...
i will reply again to this once i have performed the *deletions* you have recommended for PSA SE 3 ... i think tho i need some answers regarding my *reader* issues first *scratches head*
thank you diksha for your interest and i am sure, valuable information...
rox :)))

Safari 7 on Mavericks not reloading last session even though option in preferences selected!

Hi all,
I'm going a bit crazy. Safari will NOT reload my tabs from the last session when it opens. I have the correct setting in oreferences selected. I have tried deleting the preferences in library, but all to no avail!
Any ideas?!
Cheers

Triple-click anywhere in the line below on this page to select it:
~/Library/Safari/LastSession.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Reload Session with a new URL.

Hallo Everybody,
I would like to reload the Session of a WD application with a new URL Parameter on a button click event. This new parameter would enable one to have a new locale GUI language.
What i found is
WDClientUser.forceLogoffClientUser( "http://was:50200/webdynpro/dispatcher/local/sprache/Test?sap-locale=EN");
which can be used to force a user to logoff and load this URL. but somehow there is no effect on the GUI language.
I did search in the forum here but could not find much information. If any one has already implemented or has any idea on how one can do it. Please let me know.
Thanks
Sreenivas Mangasandra.

Following are the steps:
Take the backup of the content database in SP 2010.
Create a classic based web application in SP 2013 using PowerShell.
New-SPWebApplication -Name "TestApplication" -ApplicationPool "TestApplicationAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAc
Create a content database in the web application created above.
Mount the database
Mount-SPContentDatabase WSS_Content_100 -DatabaseServer SQL2012Demo -WebApplication http://sp2013demo:100
Now convert the web application to use claims authentication:
Convert-SPWebApplication -Identity "http://sp2013demo:100" -To Claims –RetainPermissions -Force
Finally, migrate the users to use claims identity:
$w = Get-SPWebApplication "http://sp2013demo:100"
$w.MigrateUsers($True)
See these links for more information:
http://www.sharepointnadeem.com/2013/12/sharepoint-2013-upgrade-from-sharepoint.html
http://www.sharepointnadeem.com/2014/01/upgrade-from-sharepoint-2010-classic.html
Blog | SharePoint Learnings CodePlex Tools |
Export Version History To Excel |
Autocomplete Lookup Field

Session reload

Similar Messages

Maybe you are looking for