Set a combo box using script

Hi, I am building an AIR application that reads in XML to set
up a form for editing and saving back the XML. I am using the
standard flash components including the combo box. I am trying to
set the combo box value to a value in the XML, say for instance
alignment which only has the possible selection settings of "left",
"center" or "right". I have looked through the documentation but I
can't seem to find the right code that will set an existing combo
box to the desired selection. I know my paths are correct as I can
call the open() method to open the combo box. Anyone able to help.
If I get this sorted and my application is as good as done.
Cheers,

have you tried combobox.selectedIndex=#

Similar Messages

  • How to get the kerning value and set it to back use script?

    hi,guys
    I come back again.
    I encountered a kerning problem.
    how to get the kerning value and set it to back use script?
    Thanks very much!

    For both cases, the filename can be found on the FILE.ReceivedFileName Context Property.  You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
    The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
    In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

  • Dependent combo boxes using webservice

    Hi All,
    I'm trying to create a depended combo boxes using af:selectOneChoice, using webservice datacontrol. When i try to change the value of the first combo box which has hard coded values (eg. Continent), The depended combo box (eg.Country) is empty. (which is returned via webservice) When i again change the value of the first combo box, I get the corresponding values(Countries) generated. The very first time when a value is selected is not binded to the model. Why is this happening and how to overcome this issue. I tried using the value change listener and assigned the current value to binding but there was no change in the behaviour.

    Thanks for your response Frank. The Sample worked fine. But when i try to implement the same i ran into issues.
    First, I created a combo box for continents and a managed bean.
    <af:selectOneChoice label="Region" id="soc1" autoSubmit="true"
                                  valueChangeListener="#{locateBean.setRegion}">
                <af:selectItem label="Asia" value="Asia" id="si3"/>
                <af:selectItem label="Europe" value="Europe" id="si2"/>
                <af:selectItem label="NA" value="NA" id="si1"/>
              </af:selectOneChoice>Then I created a combo box for countries using the webservice data control.
              <af:selectOneChoice value="#{bindings.Country.inputValue}"
                                  label="Country"
                                  required="#{bindings.Country.hints.mandatory}"
                                  shortDesc="#{bindings.Country.hints.tooltip}"
                                  id="soc2" partialTriggers="soc1">
                <f:selectItems value="#{bindings.Country.items}" id="si4"/>
              </af:selectOneChoice>In the managed bean as
        public void setRegion(ValueChangeEvent event) {
            this.region = (String)event.getNewValue();
        }1. When i run and select an continent, the values are not getting populated in the country combo box. If i refresh the page or select another value for the continent, then its is getting populated.
    2. When i tried to execute the operation manually at pagedef on value change event,
            OperationBinding operBinding = getBindings().getOperationBinding("GetCountryList");
            operBinding.execute();I'm getting an warning as <FacesCtrlListBinding> <getInputValue> ADFv: Could not find selected item matching value Afghanistan of type: java.lang.String in the list-of-values.Why the value binded to the managed bean or model is not getting updated for the first time. Is this the expected behavior.

  • How to verify lockout treshold and duration set bij local GPO using script

    Hi all,
    I want to succeed in veryfying the account lockout treshold and duration by checking registry.
    However this is impossible in server 2012 r2. previously these settings where visible in the registry but now it seems that they are hide in the SAM section which is not accessible.
    WMI RSOP does not contain information as it is no group policy.
    Any alternatives?
    Kind rergards,
    AL

    Hi AL,
    >>how to verify lockout treshold and duration set bij local GPO using script
    What does this mean? Does this mean that we are using a standalone server and want to check the account lockout policy set via local GPO?  
    >>Just found that using net accounts the local gpo settings are shown not i have to find a way to strip that using powershell to be able to veriy the correct line and content
    What do we want to achieve here? As you stated, we can run net accounts
    command to check password policy and account lockout policy.  Besides, we can also run command
    gpreult/h report.html with admin privileges to collect group policy result report to check this.
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Combo Box Use Global Data issue

    I am using a drop down combo box to select a name, and have checked specifiy item values, am using the item numbers in a switch statement to populate other text boxes depending on selection of drop down.  These same items appear several times in the form, so am setting them to use global data.  All work great except for the textboxes bound using global data to the drop down.  In those results, it's putting the item number, not the text value.  How do I get the text value to show instead of the item value?  Thank you!

    Resolved it by changing the switch statement to use the text value instead of item number, and unchecked the specify item values in the combo box.  I would be interested for future use to learn how to do this, but no worries if not.  At least the form is operating the way it needs to.  Thanks.

  • Needs multi column dynamic combo box using C#

    I need a dynamic Combo box to display multi columns on Drop Down Event 
    such as Stock Code, Make, Model,Sub Model, Measurement Type and so on for  my C# Application with Columns Headers 
    Please Help Me
    Thanks in Advance

    You should create a class that represents your model and then you could use a CompositeCollection as the ItemsSource of the ComboBox.
    Here is an example for you:
    namespace WpfApplication59
    public class YourModel
    public string StockCode { get; set; }
    public string Model { get; set; }
    //+ the rest of your properties
    MainWindow.xaml.cs:
    public partial class MainWindow : Window
    public MainWindow()
    InitializeComponent();
    List<YourModel> models = new List<YourModel>();
    models.Add(new YourModel() { Model = "m1", StockCode ="c1"});
    models.Add(new YourModel() { Model = "m2", StockCode = "c2" });
    cb.ItemsSource = models;
    MainWindow.xaml:
    <ComboBox x:Name="cb" Grid.IsSharedSizeScope="True" ItemsSource="{DynamicResource items}"
    xmlns:local="clr-namespace:WpfApplication59">
    <ComboBox.Resources>
    <CompositeCollection x:Key="items">
    <ComboBoxItem IsEnabled="False">
    <Grid TextElement.FontWeight="Bold">
    <Grid.ColumnDefinitions>
    <ColumnDefinition SharedSizeGroup="A"/>
    <ColumnDefinition Width="5"/>
    <ColumnDefinition SharedSizeGroup="B"/>
    </Grid.ColumnDefinitions>
    <Grid.Children>
    <TextBlock Grid.Column="0" Text="Model"/>
    <TextBlock Grid.Column="2" Text="Stock Code"/>
    </Grid.Children>
    </Grid>
    </ComboBoxItem>
    <Separator/>
    <CollectionContainer Collection="{Binding Source={x:Reference cb}, Path=DataContext}"/>
    </CompositeCollection>
    <DataTemplate DataType="{x:Type local:YourModel}">
    <Grid>
    <Grid.ColumnDefinitions>
    <ColumnDefinition SharedSizeGroup="A"/>
    <ColumnDefinition Width="5"/>
    <ColumnDefinition SharedSizeGroup="B"/>
    </Grid.ColumnDefinitions>
    <Grid.Children>
    <TextBlock Grid.Column="0" Text="{Binding Model}"/>
    <TextBlock Grid.Column="2" Text="{Binding StockCode}"/>
    </Grid.Children>
    </Grid>
    </DataTemplate>
    </ComboBox.Resources>
    </ComboBox>
    You could restyle the the templates (Grids) as per your requirements.
    Please remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

  • When i change the value of a combo box using a property node it displays the value not the item label

    I am using a combo box as a select list for text serial commands.  I have items like "engineering", "GUI", and "Scan" for the commands "MDE", "MDN", and MDS respectively which i have input as the corresponding value in the combo box.  so for example the label "engineering" has the value "MDE" in the combo box items list.  when the Vi starts it needs to read the current value MDE, MDN, or MDS and then i want it to display on the front panel the item text corresponding to that command value.
    To do this i have tried to read the serial command, ie MDS and then wire that to a "value" property of a property node of the combo-box, but instead of displaying the corresponding item label, "Scan", it displays the value "MDS" on the front panel instead.  i want the front panel to use the label text when choosing and displaying but the block diagram to use the serial commands.  Can this be done with a combo box?  I'm trying to use a combo box so i can keep it all text and avoid having to build a case statement to convert enums or rings from a numerical value to the text command.
    The correct text value is wired to the value property and it does exist in the combo-box.  I have unchecked "values match items" and selected to not allow undefined values.

    Don't use the value property node.  Use the Text.Text property node.  When creating the property node, select Text, then in the next pop-up box, select Text.
    - tbob
    Inventor of the WORM Global

  • Can I Display a Selection or Combo box using MIDP

    Hey All,
    How can I display a Selection or Combo box in My Form Using MIDlet. Please send a Way to do this. Thanks in Advance.

    Hi
    use 'List' for displaying menu..
    check the api for 'javax.microedition.lcdui.List' class
    regards
    williams

  • Populating a combo box using values in a table

    I am trying to populate a drop down box with values from a table. I have got so far.
    The combo box is populated however the values in the box are blank.
    Can some suggest the necessary modifications?
    $query="select distinct(house_type) from tbl_accommodation";
    $stmt = ociparse($conn, $query);
    ociexecute($stmt);
    echo '<select name="house_type">';
    echo '<option value = "-1">Select:</option>';
    while($row=ocifetch($stmt)) {
         echo '<option>' . $row['house_type'] . '</option>';
         echo '</select>';
    Thanks

    The ocifetch() function needs ociresult() to get the data. See
    http://us.php.net/manual/en/function.oci-result.php
    You might want to use oci_fetch_assoc() instead.
    while($row=oci_fetch_assoc($stmt)) {
      echo '<option>' . $row['HOUSE_TYPE'] . '</option>';
    }For associative arrays, use the column name in upper case.
    NB Oci_fetch_assoc() is a PHP 5 function. If you don't have it, then
    you are using PHP 4 which has a much older version of the OCI8
    extension. I'd recommend upgrading PHP, or just replacing the old
    OCI8 with a newer one. See other recent threads about how to do this.

  • Locating on a location on GMap using combo box using SDK

    Hi All,
    I have a requirement to locate a city on google map using combo box. I want name of cities to appear in combo box and on selecting a city, map should be able to locate that city. This combo box will be visible on map itself. Combo box can be a component of either Xcelsius or Flex Builder.
    I think combo box dragged from Xcelsius component panel not able to communicate with google map which is embedded in form of swf through manage and packager.
    So, I tried with Flex Builder combo box component, but not able to done it. I am not getting the flow how to communicate between combo box and google map.
    I can locate a particular city giving a latitude and longitude through propertysheet.
    Please, if anyone could help me out asap.
    Thanks in advance!

    Hi Monammed,
    The said functionality should work. Please check your logic one more time. Also, try using some spreadsheet components mapped to the cells in question and understand how the data is flowing during run-time. This will help you test things. Delete spreadsheets when you are done with identifying the issue.
    Lets check the combo box mapping one more time : Map the source of the combo to the entire range; labels in the combo box ONLY to the country column in the source range(typically this may be the left most column in the range); selected item should be mapped to the cell that has the destination for the icon and the type for default selection may be dynamic. Well, if there is any hard-coding of values involved anywhere, do check the spellings and other trivial things.
    Do let me know if this was helpful and if you need any more help.
    Thanks,
    Prasanna

  • How to set the size of combo box  using jsf

    I face problem when i set the size of a combo in jsf

    Is it not possible to use it with a GridBagLayout?Your question was "How do I get a tabbed pane to take all the space of the frame"?
    You where given the answer. Did you try it? Did it work? Then why are you questioning the suggestion?
    Its one line of code if you use a BorderLayout which by the way was specifically designed for this purpose.
    Yes you can do it with a GridBagLayout with about 5 lines of code.
    So the question is why would you want to write 5 lines of code when you can use one?
    If your question was "How do I waste my time forcing the GridBagLayout to size a component to take up all the space of the frame", then you would have received a different answer. (Although most people would have told you to use a BorderLayout anyway, since its easier).

  • Check the check-box using script

    Hi
    I have a requirement where from script i need to check the  check box.
    Based on if a condition is true , when i execute the script , the check box field needs to be auto-checked .
    Appreciate the help

    Hi,
    Access the field and set it to true. If it is a standard field it should have its getter and setter, you should use that. In case of an extension field do this :
    doc.getExtensionField("FIELD_NAME").set(true);
    Thanks
    Devesh

  • Setting field to NULL using script does not work

    Hi,
    This is a Hibernate and Oracle SQL developer-related question.
    My application uses salesmeeting with customers and an officer. When the salesmeeting is active, OfficerID is set to the salesmeeting. If the officer closes the salesmeeting, officerID shall be set to NULL. Now, sometimes when explorer doesn't close correctly, the OfficerID is still set in the database. So, when another officer tries to login to the salesmeeting it's is locked by the first officer because only one officer at the time can access a salesmeeting.
    Now to the problem: I'm trying to develop a script which simply updates the database and sets the officerID for a specific salesmeeting to NULL in order to "unlock" that salesmeeting.
    The script looks like this:
    UPDATE SALESMEETING SET OFFICERID = NULL
    WHERE OFFICERID = 'XXXXX' AND SALESMEETINGID = '12345'
    I commit the changes and OfficerID is set to NULL or (null) as it looks is SQL developer.
    When logging in to the application, officerID is set to the active officer, so far so good. But, when running the Hibernate method saveOrUpdate() for the salesmeeting, the server hangs and nothing happens.
    The thing is, when I manually set officerID to NULL by simply leaving the field blank, saveOrUpdate() works perfectly fine.
    The third way of setting trying to set the value to null, by manually setting officerID
    by typing (null) in the field generates another problem (I guess this is interpreted as the String "(null)")?
    So, what I am wondering is what my script does wrong, is it not really setting officerID to NULL or is there something I need to understand about Hibernates saveOrUpdate()?
    Thanks!
    Message was edited by:
    user615023

    Hi,
    To set a column to null, you have written right script.
    Please make sure that 'null' & null are entirly different thing.
    may be when system get hang, you might have written 'null' in stead of null.
    Thanks.

  • How to load an html file in Text Box using script?

    Hi,
    does anyone know what is the sequence of commands for inserting an html file in a text object, if possible, via vbs?
    Unfortunately, I wasn't able to find the Commands and Variables for the text object (aka user object) in the help. Where I can search for them?
    Thank you!

    Hi def90,
    Sorry for the confusion. In that point the help information is not correct. We can only import RTF and ASCII via script but not HTML. We are going to change the help for that.
    Greetings
    Walter

  • Report error when using combo box and one text field is empty

    I'm building an interactive pdf in adobe pro 9. My problem is the following: I have one text field where you can enter a numeric code and that is used to populate another text field when I choose an option on one combo box.For example: suppose I write the code 123 in the text field "A" and that the combo box has two options ("data" and "-"). When I select "-", another text field "B" is empty, while when I select "data" i populate the text field "B" using the code entered "A" with the text "data_123". In order to do this I use the standard javascript code in the Format>Custom tab of the combo-box.
    My questions are:
    - how can I prevent the pdf to proceed selecting an option in the combo box when the field "A" is empty?
    - how can I update the field "B" every time that I change the text in "A"? I found that the text is "B" is updated only when I press the selection in the combo box.

    You can set the combo box to read-only in the Validate event of the A field:
    // Validate script for text field
    getField("combo1").readonly = !event.value;
    To update the value of B when A changes, you can expand the script above to something like:
    // Validate script for text field
    var f1 = getField("combo1");
    var f2 = getField("B");
    // If there is an entry in the A field...
    if (event.value) {
        f1.readonly = false;  // Make sure the combo box is activated
        f2.value = f1.value === "-" ? "" : "fa.value + event.value;  // Update the value of field B
    } else {
        f1.readonly = true;  // Deactivate the combo box
        f2.value = f2.defaultValue;  // Reset field B
    You might also want to reset the combo box somewhere in there, but it's not clear to me when you would want to do that.

Maybe you are looking for