Link between two or more reports

Hi All,
I want to make a link between two Hyperion Financial Reports. I'm working on HFR 9.3.1 version.
For example :-
There must be an option in report, like a hyperlink to open another report. After a click on the link it will open the linked report.
I tried one option "Add releated contents" but that works only on grid which are having cell values but what I'm looking is to give a link on text and from that text link user will able to navigate.
Regards,

Sorry I just thought of a workaround
You do have to use related content on a data value but you can use formatting to hide everything but the link. Use the REPLACE tab within the cell format to relace the data value with a text string (what you want your URL to display as). If you want it as a menu then you could do this in a seperate grid altogether to save you having to mess with your actual report grid too much.
Hope this helps
Stuart

Similar Messages

Change or delete the docflow link between two existing documents

Hi All,
Is there any FM or soulution to change the doc flow link between two documents .
For ex .. i have document A and document B , and created a doc flow link from A to B , Now i have to change the succeeding document to C
I have tried to modify the doc link ,but its not working using crm_order_maintain.I thought of deleting the link between A and B and then create a new link Between A and C , but deletion of link bewteen A and B is also not working.
I have checked with FMs CRM_DOC_FLOW_DELETE_CHECK_EC and CRM_DOC_FLOW_DELETE_EC, followed by CRM_ORDER_SAVE AND COMMIT . i could not find any exception from this FMs , but still the doc link is not deleted.
Pls share if you have any suggestions.
Regards,
Nithish

Hello
I wrote a report to delink items from document flow. I uploaded it [here|http://wiki.sdn.sap.com/wiki/display/CRM/Removelinksfromdocumentflow].
Please, use with caution and always perform careful tests before you run it in a production envinronment.
Hope it helps
Joaquin
Edited by: Joaquin Fornas on Nov 15, 2011 11:49 AM

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Linking between two workspaces

Good afternoon all,
I was wondering if there was anyway for me to link between two workspaces on the same schema.
What I currently have set up is two workspaces (1 and 2). I have done a lot of work on 1 and built a Single Sign On application to manage my applications. Workspace 2 was created for a separate team, but I would like some sort of authentication. I was wondering if there was anyway for me to leverage my existing app in Workspace 1 to authenticate for applications in Workspace 2.
My guess is that it's not possible, but I figured I might as well ask around to see if there is some weird hack around it.
Thanks in advance,
Ivan

Alright I'll post it on there. Figured that InDesign users would know more about the links and how to set them up. Thanks for the advice.

Link Between two worksheets in Discoverer

Hi...
I'm trying to create a link between two worksheets without success.
What I have is a 'General Ledger' worksheet which lists the journal source for a particular account code that is selected by the user via a parameter. Say the journal source is Accounts Payable invoices, what I want to do is have another worksheet which is 'Accounts Payable' and on that worksheet I want to be able to list all the invoices that make up the journal total on the 'General Ledger' worksheet.
I have tried to create a link using a sub query condition but when I run the report, the first part 'General Ledger' works fine but when I click on the 'Accounts Payable', I get a "Invalid Number" error message.
I am going to need to create these type of links for various reports.
I would be very grateful if anyone can please advise on how to create the link.
Thanks

I think you're on the right track with the subquery. So, the wrong number error must be related to the format of the columsn you use for the subquery.
Alternatively, if the account number you've created the parameter for in sheet 1, you can use the same parameter again for sheet 2 (then check "only one value for all sheets" for that parameter). But this obviously only works if that account number is in the second sheet too...

View Link between two query views

Hi is it possible to create a view link between two views having the where clause bind variables.
How you set the bind variables at the run time for the View objects. It is giving hard time for me to use the Master view in the XmlData bean to generate the Xml document.
I am able to set the Master views bind variables, but for view link destination view
where clause bind variables are not able to set ( link object link condition bind variables are binded run time but the views where chause bind variables of destination view are unable to setand bind)
Thanks
null

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

How can I make a server differ between two or more clients?

How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?

Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?).

Create view link between two view objects (from programmatic data source)

Hi Experts,
Can we create a link between two view objects (they are created from programmatic datasource ; not from either entity or sql query). If yes how to create the link; ( i mean the like attributes?)
I would also like to drag and drop that in my page so that i can see as top master form and the below child table. Assume in my program i will be only have one master object and many child objects.
Any hits or idea pls.
-t

Easiest way to do this is to add additional transient attributes to your master view object, and then include those additional transient attributes in the list of source attributes for your view link. This way, you can get BC4J to automatically refer to their values with no additional code on your part.

Set a relation between two or more images

Is it possible to create a relation between two or more images?
For example: We have an image in three versions (rgb, cmyk, gray). If I find one of these, I would like to klick on a button like "show correspondend images". So I can see all versions of this images we ever saved.
Any idea?
Best regards!
Roman

I don't think Lightroom handles cmyk images.
For rgb and gray, you can stack the images, or make the gray from a virtual copy of the rgb. In this way, simply unstacking the images results in your requested "show corresponding images".

How to share the data between two or more frames

How to share the data between two or more frames based on the database relationship in JDeveloper?

You can pass data between frames by passing it as parameters.
That is when you are invoking another frame, pass your data as arguments through the constructor to that frame .
You can also achieve this through static or public methods, but static variables as we know is not suggested which might occupy more memory space.
Regards,
Srinivasan AShwath
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by [email protected]:
How to share the data between two or more frames based on the database relationship in JDeveloper? <HR></BLOCKQUOTE>
null

Go URL linking between two reports with no relation

Hi Experts,
Sorry this question may have been asked numerous times, but I was not able to fetch the required response.
I have two reports Repor1 based on Table 1 having columns A and B, Report2 based on Table2 having columns C and D.
First is it possible to create a go URL moving between two reports based on tables having no replationship between them?
My requirement is to create a hyperlink on column B in Report1 so that when a user clicks on the hyperlink it takes you to report2 and filters report2 column C using values of Table1 coulmn A. Table1 and Table2 have no relationship between them.
Thanks in advance,
Anura

I had two columns in my report1 first being market and second being a measure value, i provided the following link in the formula for my measure value and made that as HTML data format, my Report2 contains the market column with one more additional coloumn and i want my second report to be filtered based on Market value in Report1.
I don't know why but the URL that is being displayed here is not the actual url, please click on the URL to knowthe complete url that I mentioned for the formula
'’||CAST(Sales Measures.Dollars AS CHAR)||’'
The value of Market.Region is not being passed correctly as my Report2 gives the following message in the results view when i move from Report1 to Report2 via the hyperlink
Region is equal to '||Markets.Region||'style="text-decoration:none;
Please suggest what is going wrong?
Thanks in advance,
Edited by: Anurag007 on Jul 29, 2010 2:46 AM

Link between two reports.

as per the requirement of my system, i have a report based on some table say which shows day end balance for a particular customer. in this report i want to give a link which shud open another report to show last ten transations .
how to do this ?
thank u in advance
but expecting solution
chaitali

You need to create a LINK object between the two reports.
When you build the link it will ask you for a target. Your target is your second report, which must accept a parameter.
Next you edit the second report under the Column Formatting tab (which is number 2 tab under the report editing options) in the link drop-down you will find your new link which you created. Edit the link and set parameter to the column you want to pass from report 1.
Hope this help.
Jason Pepper

Failed to retrieve data from the database/invalid argument provided when employing link between two web services datasources

Post Author: vpost
CA Forum: Data Connectivity and SQL
I am trying to join information from two related web services within CR XI. I have successfully set up the web services as data sources have been able to get to the point where I get good data back. However, when I try to pull in certain fields, I get an error that says "Failed to retrieve data from the database/invalid argument provided". Here's the scenario:
The web services are structured as follows:Web Service 1 (Artist) has attributes of Artist Name and Date of Birth.Web Service 2 (CD) has attributes of CD Title and Release Date. Underneath each CD are songs, each of which have a Song Title and Artist Name.
I have defined both web services and defined a link between Artist.Artist Name and CD/Song.Artist Name. I am able to run a report with Song Title and Date of Birth that crosses web services. I am able to run another report with Song Title and CD Title that crosses the different levels in the second web service. However, if I add CD Title to the first report or Date of Birth to the second (both of which effectively force CR to employ the link between the two web services AND the CD/Song hierarchical structure in the second web service, I get the aforementioned error.
Any assistance understanding how multiple web services can be linked in this manner would be greatly appreciated.
Thanks in advance.

Post Author: Mike Wright
CA Forum: Data Connectivity and SQL
Not sure about your exact situation, but having similar problem with another application and have tracked down to security. Added user to group Domain Admin and it works fine. It appears to be accessing a subdirectory which it does not have permission to use and then times out and returns the "invalid....". Seems that once the query just over a certain size (and I'm not sure what triggers this) it needs to make use of temparory file disk, intead of ram.
I'm still trying to track down which temporary it's trying to uses - so if you have any ques.
cheers

Link between Base and Target report

Hi All,
We have a scenario. We have a base report based on a Custom Object from which we are passing a field value (which uses a joined field value from Product Object) to another target report based on another Custom object which matches the values passed from the base report(link field).
Also in the Base Report we have specified the Navigation report and prompted the link fields accordingly in both the reports
But when we click on the hyperlink in the base report, the matching values are not displayed
Both these reports are REAL TIME reports. We tried the same kind of link between these two Objects using Account Name and it is fetching the matching records.
What can be the reason behind this? Is it because we are passing the Joined field value as the reference to the target report the matching records are not shown?
Kindly share your ideas.
Thanks and Regards,
Sabarish

it could be that the formula for that filed in both the custom objects is different 'coz of which its not working

How to create Doc Link between two document numbers?

Hi Folks,
I have two document numbers with different transaction type.
I want to create a Document link between these two documents, i.e. each documents should come in Dock Flow of each other.
How to acheive this target.
I tried to do it by using FM CRM_DOC_FLOW_MAINTAIN_OW, but not able to achieve it.
So please tell me how to do this thing.
Regards
PG

Hi PG,
The FM CRM_DOC_FLOW_MAINTAIN_OW should work , I am not sure what parameters you are passing. Any way you can use the CRM_ORDER_MAINTAIN as well which will eventually call CRM_DOC_FLOW_MAINTAIN_OW . Have a look of the sample code, This will give you some idea
lw_input_field_names-fieldname = 'GUID'.
      INSERT lw_input_field_names INTO TABLE lt_input_field_names.
      CLEAR lw_input_fields.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_h.
      lw_input_fields-objectname = gc_object_name-orderadm_h.
      lw_input_fields-ref_guid    = lw_orderadm_h1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_h-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-header_header.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_h1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_h.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CLEAR lw_input_fields.
      REFRESH lt_doc_link1.
      lw_input_fields-ref_kind    = gc_object_kind-orderadm_i.
      lw_input_fields-objectname = gc_object_name-orderadm_i.
      lw_input_fields-ref_guid    = lw_orderadm_i1-guid.
      lw_input_fields-field_names = lt_input_field_names.
      INSERT lw_input_fields INTO TABLE lt_input_fields.
      lw_doc_link1-objkey_a   = lw_orderadm_i-guid.
      lw_doc_link1-brel_kind = gc_brel_kind-item_item.
      lw_doc_link1-brel_mode = gc_mode-create.
      lw_doc_link1-reltype    = gc_bin_rel_type-predecessor_successor.
      INSERT lw_doc_link1 INTO TABLE lt_doc_link1.
      lw_doc_flow1-ref_guid   = lw_orderadm_i1-guid.
      lw_doc_flow1-ref_kind   = gc_object_kind-orderadm_i.
      lw_doc_flow1-doc_link   = lt_doc_link1.
      INSERT lw_doc_flow1 INTO TABLE lt_doc_flow1.
      CALL FUNCTION 'CRM_ORDER_MAINTAIN'
        CHANGING
          ct_orderadm_h     = lt_orderadm_h1
          ct_input_fields   = lt_input_fields
          ct_doc_flow       = lt_doc_flow1
        EXCEPTIONS
          error_occurred    = 1
          document_locked   = 2
          no_change_allowed = 3
          no_authority      = 4
          OTHERS            = 5.
      IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        RAISE error_occurred .
      ENDIF.
Hope this will help.
Thanks,
Vikash.

Link between two or more reports

Similar Messages

Maybe you are looking for