Set a value for a variable of type exit

Hello,
I am filling some variables with multiple values in user exit.
Now, i would like to place some of these characteritics in Header area. It's of course impossible because there is multiple values but ...
I will put dropdown box in the web application for these chars. The problem is that by default, any value is assigned to the dropdwom ( any variable value is set).
Do you know how i can set a value for theses variable after filling all values by the user exit. SO that only one value is selected for the header and all others values available in the dropdown ?
Regards,
Jarod

Hi,
Off late, this seems to be a usual requirement.
Just create a Z program to call the FM API_SEMBPS_VARIABLE_SET and then call the FM API_SEMBPS_POST.
you should be preparing the content/set value to pass to the FMs. check the whereused list to see how this FMs can be used/called.
finally, run this program for your variable, after the loading/filling the exit variable. Please note that to set 'exit' variables, the sourcing variable's content need to be read/set first before setting the exit varible.
HTH,
Regards,
Nataraj.

Similar Messages

Using HttpHeader to set value for session variables

Hi,
We want to set values for 2 session variables (USER and ROLEID) using HttpHeader in obiee 11g. Has anyone tried this? How can we achieve this?
I found the below note on the forum for setting value for the USER session variable. how can we set the ROLEID session variable also? is it possible to set values for 2 variables?
for setting the USER session variable,
You should add this in $BI_HOME/bifoundation/web/display/authenticationschemas.xml:
<SchemaKeyVariable source="httpHeader" nameInSource="Proxy-Remote-User" forceValue="SSO"/>
<AuthenticationSchema name="SSO" displayName="Single Sign On" userID="IMPERSONATE" proxyUserID="NQ_SESSION.RUNAS" options="noLogoffUI noLogonUI">
<RequestVariable source="httpHeader" type="auth" nameInSource="Proxy-Remote-User" biVariableName="IMPERSONATE" options="required"/>
</AuthenticationSchema>
Please suggest.
Thanks.

I think maybe your SnmpValue type or value is not corrent.
1.3.6.1.4.1.7064.201.1.200.100.0 is Enum control type
when I use
SnmpValue val = new SnmpString("0");
It doesn't work, but when I use
SnmpValue val = new SnmpInt(0);
It works. I think the JDMK should give some warning message when the type is not correct. :)
The code is following:
final SnmpVarBindList setList = new SnmpVarBindList(" set varbind list ");
SnmpOid oid = new SnmpOid("1.3.6.1.4.1.7064.201.1.200.100.0");
SnmpValue val = new SnmpInt(0);
SnmpVarBind valueBind = new SnmpVarBind(oid, val);
setList.addVarBind( valueBind );
SnmpRequest setRequest = session.snmpSetRequest(null, setList);

Multiple values for one variable?

I've created my first set of variables (using Form Properties>Variables), tweeked some XML sourcecode and they're working .
What I'm now trying to figure out is how to have one variable that has 2 values that pop up in 2 different text fields.
Simple form at this point:
Item, Model and Service Tag.
The user selects the item from the drop down list and the Service Tag field is autopopulated from the variables I set.
How do I get the Model to appear based on the Item selection?
I tried putting the two values for one variable together but both values appear in the same field.
Variable info that works: Scan (variable) = MC3090BT (value)
I also need this particular variable to = Handheld scanner (try to ignore the redundancy).
I attempted to make MC3090BT as it's own variable with Handheld scanner as it's value, and add to the code below but it didn't work.
Here's some of the code if it helps:
<event activity="change" name="event__change">
               <script contentType="application/x-javascript">if(xfa.event.newText == "Handheld scanner"){
    servicetag.rawValue = scan.value;
}else if(xfa.event.newText == "Latitude X1"){
    servicetag.rawValue = X1.value;

Hi, I am trying to do the same thing..passing multiple values to receiving query variable through RRI. Right now if I assign a query variable of type multiple single values it does not take any value. It works only if I assign variable of type Single Value.
In my assignment details the sender query has Generic for type and * for selection type.
If any one knows how to pass multiple values to receiving RRI query, please give the details.
Thanks

Set new value for VO attribut

I have function in package on database which is param is String and return value is also String(VARCHAR2).
That function calculate some field on db and return a result.That is OK
I made VO in my AM.
"SELECT package_name.func_name("string") from dual" and that is OK also.
When I start that module I recive valid result from database based on string which I passed to function.
And that works fine.
Question :
How can I change value or how can I set new value for the package_name.func_name(variable) in VO
during runtime in my application ? ^^^^^^^^
JDeveloper 9.0.3.988

I have function in package on database which is param is String and return value is also String(VARCHAR2).
That function calculate some field on db and return a result.That is OK
I made VO in my AM.
"SELECT package_name.func_name("string") from dual" and that is OK also.
When I start that module I recive valid result from database based on string which I passed to function.
And that works fine.
Question :
How can I change value or how can I set new value for the package_name.func_name(variable) in VO
during runtime in my application ? ^^^^^^^^
JDeveloper 9.0.3.988 1. When using stored procedures it would be better to use it in following way:
Connection conn = //get it some how
CallableStatement cs = conn.prepareCall("{call myPackage.do_something(?)}");
cs.registerOutParameter(1, java.sql.Types.VARCHAR);
cs.execute();
2. You could parameterize it like this:
CallableStatement cs = conn.prepareCall("{call " + packageName "." + funcName + "(?)}");
cs.registerOutParameter(1, java.sql.Types.VARCHAR);
cs.setString(1,"someString");
cs.execute();
String result = cs.getString(1);
where packageName and funcName are defined elsewhere
--hery

How to use one variable as a default value for another variable?

Hi Experts,
Is it possible to use one variable as a default value for another variable?
For example:
Variable 1 = current calendar year month
Variable 2 = mandatory input ready variable for calendar year month
I want to use variable 1 as default value for variable 2, but also have the ability to change the month if required.
Thanks!
Kathryn

u can use replacement path variable
in that case u can replace the values of 1 variable with the another variable...
but u cannot do this setting
u cannot make variable 2 as mandatory
u cannot enter value for variable 2
because by default it will take the value of variable 1
u have to make follow settings
variable 2
name , technical name
processing by = replacement path
infoobject = ocalmonth
next tab
replaced by another variable
variable name
offset start , offset lenght
save and hit okey

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

Default multiple values for formula variable on variable selection screen

Hi All,
Suppose 'A' is formula variable with customer exit as processing type then i want four default values for this variable eg: 3, 6,9, and 12 as selection options, when we will execute query user can able to pick any one of the default value.
is it possible in BEx for formula variables?
I also tried with ABAP code in 'cmod' t-code, but it is not working properly for 4 default values....but for single default value, code is working fine.
I am using following code ::
When 'ZCSIMCTB'. // variable name
IF i_step = '1'.
CLEAR : l_s_range.
l_s_range-low = 3.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 6.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 9.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
CLEAR : l_s_range.
l_s_range-low = 12.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
Thanks in advance

Hi Sankar,
Thanks for reply...
With single quotes also its not working.......
Also as I am using Formula Variable so by default "Single Value" is coming on Variable Details....
Regards,
NIlesh

Maintain values for the variables in using Transaction SM30_SSM_VAR

Greetings
Im trying to start a customizing transaction of SRM from Transaction Solar02 in the Solution manager, and this message appears:
Maintain values for the variables in <> using Transaction SM30_SSM_VAR
I start the transaction SM30_SSM_VAR but there are no values maintained. I don't know which values have to be set.
Please if anybody could help me, I will be much appreciated
Regards
Henry
appreciated.
Regards
Henry

Hi Henry,
you probably clicked an URL that has some <value> brackets inside? In this case you need to create a variable in SM30_SSM_VAR with the name "value" and maintain as attribute the e.g. the SRM-server you want to be replaced in the URL.
Regards
Andreas

Set initial value for numerical control

Hello LV users,
I have a VI that is used to initialize some experimental equiptment. It passes on a cluster of ten or so numerical control DBL integers as parameters. Everytime I open the programe the values are reset back to zero and I have to enter the values back in. Is there any way to set default values for the controls so I do not have to change them everytime I open the program.
Thanks
Solved!
Go to Solution.

Wowden,
If you want to set default values for multiple numeric control's in your cluster in one go,
-Type in the desired default values
- Right click on your cluster, browse to 'data operations'
- Choose 'Make current values default.
Similarly, if you need to set defaults for multiple clusters or multiple controls on your front panel,
- Choose 'Edit' in the menu
- Choose "make current values default' (This sets defaults for all controls/constants etc. in one go)
RaVI

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Setting default values for field on screen.

Hello,
I am trying to set default value for one of the fields I have on screen when I execute the custom transaction.
I am doing that in PBO as follows. But the default value is not set for Date field.
PROCESS BEFORE OUTPUT.
MODULE PBO_OUT.
MODULE STATUS_5000.
*&      Module STATUS_5000 OUTPUT
      text
MODULE STATUS_5000 OUTPUT.
SET PF-STATUS 'NON_SAP_DOCUMENT'.
SET TITLEBAR '001'.
ENDMODULE.                 " STATUS_5000 OUTPUT
*&      Module PBO_OUT OUTPUT
      text
MODULE PBO_OUT OUTPUT.
ERDAT = SY-DATUM.
ENDMODULE.                 " PBO_OUT OUTPUT
Please help.
Thanks.
Regards,
Rajesh.

Works Now...

How to hide PNP selection windows and set default values for PNP.

Hi expert,
I am using HR logical database PNP, but I don't want to display selection windoes for running program on PNP, whereas I want to set default value for some selection items in the program. could you please tell me how to get those two targets?
Many Thanks,

Hi
You have mentioned 2 things.
1. Don't want selection windows for running program for PNP - this can be achieved using the HR Report category - You can get more details on HR Report Category on
HR Report Category
2. I want to set default value for some selection items - This you need to achieve in initialization event of your program.
How you can get this can be explained by INITIALIZATION (SAP Library - ABAP Programming (BC-ABA))
Thanks,
Sreeram

Extending flash: how do I set default values for filenames

Hi,
I am trying to set default values for filenames
<choosefile> and <popupslider>s that will show up when
my XMLpanel first loads in my jsfl extension file. It seems that I
can only set default values for textbox items.
How do I do this for filenames and popups?
As a workaround, I also tried using a flash object dialog box
to look like a <choosefile>, or any jsfl command, but then
how do I return those values back to the XMLpanel that calls them.
and pass the data back to my jsfl script.
lemme know if you know a way,

Create two constants for the Allocate Mode input (right click > create > constant). Place one in the true case of the case structure, and place the other one in the false case. Wire them to the same tunnel (border of the case structure), then wire the tunnel to the Allocate Mode terminal of the AO Config. I don't have Traditional DAQ installed, but that should do it.
Misha

How can i implement the default value for this variable?

In one of our Stored procs,we have a variable RECS_TO_DELETE, which determines the number of records to delete from various DELETEs that happen within this proc.
The value for RECS_TO_DELETE variable should be obtained from a configuration table sys_config
select
rec_num into RECS_TO_DELETE
from sys_config
where
sys_code=55;
But if something goes wrong with sys_config table or the above SELECT INTO, our client wants to makes sure that RECS_TO_DELETE should have a default value of 1000.
In the code, how will i implement having this default value of 1000 for RECS_TO_DELETE variable in case the above SELECT INTO fails for some reason.

Hi,
You have to assign a value before the execution...
DECLARE
    RECS_TO_DELETE NUMBER(9) := 1000;
BEGIN
    SELECT rec_num
    INTO   RECS_TO_DELETE
    FROM   sys_config
    WHERE sys_code = 55;
    DBMS_OUTPUT.put_line(RECS_TO_DELETE);
EXCEPTION
    WHEN NO_DATA_FOUND THEN
       DBMS_OUTPUT.put_line(RECS_TO_DELETE);
END;
/Regards,

Set default value for parameter fields

Good day!
Situation:
1. I have 2 parameter fields in reports (dateFrom and dateTo)
2. Before running report in ASP.NET I change value this fields (dateTo = today, dateFrom = today - 3 days)
3.I use for this source:
foreach (ParameterField crParam in CrystalReportSource1.ReportDocument.ParameterFields)
                        CrystalDecisions.Web.Parameter crParametr = new CrystalDecisions.Web.Parameter();
                        string ParametrName = crParam.Name;
                        crParametr.Name = ParametrName;
                          crParametr.DefaultValue = ActionReportParameter.GetParametrValue(ReportName, ParametrName);
                         CrystalReportSource1.Report.Parameters.Add(crParametr);
4. And repurt run without request value parameter fields.
5. BUT!!! now I need request value parameter fields before report start running - I want set default values for filelds and offer user change its before report start run.
How do this?
Thanks

I believe you need to create your own parameter promt screen. Capture what the user entered and pass that to the report(?).
slv

Set a value for a variable of type exit

Similar Messages

Maybe you are looking for