Set as default value the Item Category in the Maintenance Order

Hello everyone,
We are trying to find a user exit in order to set as default value the item category in the Maintenance Order once the Material has been introduced (Tag Components).
SAP Customizing let the user set the Item Category automatically per Material Type, but we need to set different Item Categories to materials belonging to the same material type.
We would really appreciate any help relating this issue.
Thank you very much,
Víctor Liedo

Dear Paul,
Thank you very much for your response.
I had already tried customizing mentioned by Pithan, but it did not work because we need to set different Item Categories for Materials with same Material Type.
We have been searching for exits which may let us set Item Category in the Maintenance Order, but it does not seem to be possible.
What you say about adding some custom validation through user exit, not to set item category as default value, but to check if the one entered is valid, sounds the best way of achieving our commitments.
I have tried to look for CNEX0037 & CNEX0038, by using transactions SE37 and SE38, search for programs and functions modules, but it did not work. Could you please tell us what kind of objects are?
Thank you very much in advance.
Víctor Liedo

Similar Messages

Set deletion flag in the maintenance order

Hi all,
Am not able to set the deletion flag from the maintenance order, the :set: button is not active. can anyone help me in this regards?
Or is there any tcode for setting deletion flag to maintenance orders?
Thanks
Anish

hi
i think it is probably authorization issue ie you don't have the authorization to put the deletion flag
or check whether you have technically completed the order ,if not try to TECO and then try
regards
thyagarajan

How to set a default value for a drop down list box and then apply cascading based on the default value in Infopath 2010.

Hello Everyone
I have two drop downs. Both are coming from look up fields from two lists. i want to set a default value(first list item) for the first drop down list box and then apply cascading based on the default value for the next drop down list box. I found one article(http://www.bizsupportonline.net/infopath2010/display-first-item-drop-down-list-box-infopath-2010.htm)
where in i can set a default value but i can't apply cascading based on that default value. Any suggestions would be highly appreciated.
Thanks
Ramanjulu Naidu N

Hey Ramanjulu,
Take a look at the below article which I believe will answer your question.
http://basquang.wordpress.com/2010/03/29/cascading-drop-down-list-in-sharepoint-2010-using-infopath-2010/
Daniel Christian (MCTS)

Can we set a default value for the container variable in BPM?

Can we set a default value for the container variable.?
Suppose if i have a loop step and i have given a container variable i=5 as end condition.What value will it take during its first execution?Can we set the value for container before a recieve step?

Hi
Define Container Variable of Type integer and Category Simple Type .Use Condtion in Loop.
In Container Operation Step Assign value and Use Expression to
Increase or Decrease Valus according to your operation.
look Pattern 4 in this blog to understand Container Operation
/people/sharathchandra.girmaji/blog/2008/09/11/bpm-with-patterns-explained-part-1

Addition of field in personal setting-default value-po item

Hi,
can any one tell me how to incorporate following senario while executing me21n tcode
I want to add a new field Shipping Instructions EKPO-EVERS in the personal setting Default Value PO Item.
please tell me the steps to do so
thanks

Hi
please refer to this
<b>New tabs in the header tab-sheet of ME21N/ME22N/ME23N

MASTER DETAIL - SET DEFAULT VALUES FOR ITEMS

I have a master detail page where on the master I do things like updating the entered_by and entered_date fields
by applying functions to set the item level details and the setting them to read only.
On the detail portion of the page I'd like to do the same but I don't see the details items on the page - only the master items.
The details portion is for comments so I'd like to have the commenter_name and commenter_date set to defined values
when I hit the add row button on the details portion.
Where are the detail items?
I'm using APEX 3.2
Thanks
Steve

Hi,
When you use master detail form, APEX generate 'Detail portion' as report. So if you edit the page, you may not see actual items for 'detail portion'.
If you want to set any default values or want to format these items, you may need to do as follows
1> Edit 'report' of 'detail portion'
2> Click on report attributes
3> Click on column, you want to set default values
4> Now here, Under 'Tabular Form Element' section you can do this by setting proper values to 'default type' and 'default' fields.
Hope it helps
Cheers
Hari

How to set a Default Value in the drop down on Account Creation ?

Hi,
i have to set a default value in the drop down as soon as a User in a particular business role clicks on New Account. I have written the following code in do_prepare_output method. But this code is executed in the 2nd server round trip after entering some value or pressing enter. so i am not getting as soon as user clicks on the New Account.
How to set that default value when user clicks on New Account ? and where should i code ?
IF lv_icwc_profile = 'ZCSALESPRO' or lv_icwc_profile = 'Z_SALESPRO' .
try.
              lr_entity ?= me->typed_context->header->collection_wrapper->get_current( ).
              lv_current = lr_entity->create_related_entity(
                                              iv_relation_name = 'BuilRolesRel' ).
                             lv_current->set_property(
                                iv_attr_name = 'PARTNERROLE'
                                iv_value     = 'BUP002' ).
               CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
               cx_crm_genil_model_error.
               return.
        ENDTRY.
Thanks and Regards
Raman Khurana

Hi,
I have some idea abt it, it is also used in account life cycle.
Please refer SAP note 1097651, Defaulting a life cycle stage.
Let me know if useful.
rgds,
Vinay

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

How to set a Default Value in Combobox

Dear All,
I want to set a default value in a combobox when open the form. How can I set that?
Default value : It is one of the options of the combobox.

Im doing it as
If BusinessObjectInfo.FormTypeEx = "150" And BusinessObjectInfo.BeforeAction = False And BusinessObjectInfo.EventType = SAPbouiCOM.BoEventTypes.et_FORM_DATA_LOAD Then
            oForm = SBO_Application.Forms.GetFormByTypeAndCount(BusinessObjectInfo.FormTypeEx, 1)
            Dim vepcombo As SAPbouiCOM.ComboBox
            Dim vepitem As SAPbouiCOM.Item
            vepitem = oForm.Items.Item("24")
            If vepitem.Enabled = True Then
                 vepcombo = vepitem.Specific
                vepcombo.Select(10, SAPbouiCOM.BoSearchKey.psk_Index)
            End If
        End If

Set a default value for a radio button populated with a List of value

Hi,
I am using jdeveloper 11.1.1.3.0. I need to set a default value for a radio button populated with a List of value(Yes/No). Here's the selectonechoice code.
<af:selectOneRadio value="#{bindings.Code.inputValue}"
label="#{bindings.Code.label}"
required="#{bindings.Code.hints.mandatory}"
shortDesc="#{bindings.Code.hints.tooltip}"
id="sor1" autoSubmit="true"
valuePassThru="true" layout="horizontal">
<f:selectItems value="#{bindings.Code.items}" id="si1"/>
</af:selectOneRadio>
I want to have the selectonechoice set to No by default. In the previous versions, I set the default value in the base attribute VO. But it is not working in the new version.
Thanks

Hi,
this should work in JDeveloper 11.1.1.3 the same as in 11.1.1.2. If it doesn't then it is better to file a bug than to work around it
Frank

Setting a Default Value within a Tabular Form

Hi All,
Using Apex 2.2.1
Hoping someone can assist. I have the following two scenarios where I would like to set a default value to a column within a tabular form.
Scenario One:
Prior to actually displaying the tabular form on the page, I have a region on this page where I ask the user to select a Application No. first (using a Select List with Submit). Once this item, say P50_APP is set to a value, the Tabular Form region is then presented to the user by where I then allow them to enter certain information required using the 'Add Row' button. One of the columns within this tabular form also represents the Application No.
My questions are:
a) I have made the Application No. within the tabular form as a LOV, so when the user hits the 'Add Row' button, how can I set the initial value to P50_APP value using the 'Default Type and Default' items within the column?
b) Since I am trying to achieve a master-detail type scenario here, if (a) above is not possible, if I hide the Application No. column within the tabular form, how can I set it to P50_APP when the user presses either the 'Add Row' or 'Submit' buttons?
Scenario Two:
Is it possible to pass a value from a tabular form, i.e a column within this tabular form on one page, to another tabular form column on a another page (when the user presses the 'Add Row' button) within the same application?
For example, on page 50 I have the column #APP_NUMBER# passed onto page 60 which is another tabular form that also holds the same column name #APP_NUMBER# , so when the user on page 60 hits the 'Add Row' button, I would like the App Number column default to the one just passed over from page 50.
Is this possible?
Apologies if I am asking the same things in both scenarios - just want to make sure I understand MRUs.
Thanks.
Tony.

Hi Andy,
Thanks for getting back to me but I think you are referencing these default values in the wrong section.
What I am actually trying to set is the value of a column within a tabular form to P50_APP and it seems to me that the only available options for setting default values on a tabular form column are by using:
Default Type: which can be one of:
No Default
Item (application or page item name) or
PL/SQL Expression or Function
and then actual source is set against:
Default:
Unsure as to how to actually set the value of P50_APP which is in session to the individual tabular column mentioned above.
FYI, I have tried selecting for Default Type: Item (application or page item name) and then specifying for Default:&P50_APP. as well as Default Type:PL/SQL Expression or Function and specifying for Default: :P50_APP but to no avail.
Tony.

Set Column Default Value with Workflow

How to set Column Default Values using a workflow.
<input alt="Mark as abusive!" id="ctl00_m_g_e11f6e6d_9b4b_42d7_97fb_486623821166_ctl12_ctl03_abuseButton_710" name="ctl00$m$g_e11f6e6d_9b4b_42d7_97fb_486623821166$ctl12$ctl03$abuseButton_710" src="http://www.sharepointforum.nl/_layouts/images/TOZIT/SharePointForums/abuse/abuse.png"
style="border-width:0px;" title="Mark as abusive!" type="image" />
15 seconds ago
After I add an item including metadata in a List, a Workflow starts to create a Library Folder with rootfolder, subfolder and sub-subfolder names based on the List first three column values.
I like that the unique created library subfolder automatically receives several additional List column values in its Column Default Value with that workflow.
After done, documents added to this subfolder are automatically populated with Metadata from the parent Subfolder.
Workflow standard function can be used to populate the folder Column Value to this but not the Column Default Value.
Does someone has a solution how to set Column
Default Value using a workflow?
I like to use such workflow in Sharepoint 2010.
Thank in advance.

Hi,
I think it cannot be achieved by workflow.

How to set a default value in a dropdownlistbox

Hi,
In CRM 2007 WEBUII have created a dropdownlistbox (ddlb) filled with currency codes.
Now I want the default value of the ddlb to be the currency of the country of the loggedin user, ie : 'EUR'
Anyone an creative idea how I can achieve this ?
In first place I need to know how I can set a default value of a ddlb.
--> ddlb type ref to CL_CRM_UIU_DDLB.
regards,
Abjuh

Hello Wolfgang,
If the method does not exist yet, you can create it in your enhanced (Z) context node.
Definition:
ATTRIBUTE_PATH Importing     Type                  STRING
ITERATOR          Importing           Type Ref To     IF_BOL_BO_COL_ITERATOR
VALUE                    Returning        Type                  STRING
Implementation:
method GET_BP_GROUP.
    DATA: current TYPE REF TO if_bol_bo_property_access.
    DATA: dref    TYPE REF TO data.
    if iterator is bound.
      current = iterator->get_current( ).
    else.
      current = collection_wrapper->get_current( ).
    endif.
TRY.
    TRY.
        dref = current->get_property( 'BP_GROUP' ). "#EC NOTEXT
      CATCH cx_crm_cic_parameter_error.
    ENDTRY.
    CATCH cx_sy_ref_is_initial cx_sy_move_cast_error
          cx_crm_genil_model_error.
      RETURN.
ENDTRY.
    IF dref IS NOT BOUND.
      value =''
      RETURN.
    ENDIF.
    TRY.
        value = if_bsp_model_util~convert_to_string( data_ref = dref
                                    attribute_path = attribute_path ).
      CATCH cx_bsp_conv_illegal_ref.
        FIELD-SYMBOLS: <l_data> type DATA.
        assign dref->* to <l_data>.
*       please implement here some BO specific handler coding
*       conversion of currency/quantity field failed caused by missing
*       unit relation
*       Coding sample:
*       provide currency, decimals, and reference type
*       value = cl_bsp_utility=>make_string(
*                          value = <l_data>
*                          reference_value = c_currency
*                          num_decimals = decimals
*                          reference_type = reference_type
        CONCATENATE <l_data> '-CURR/QUANT CONV FAILED-' INTO value
                    SEPARATED BY space.                 "#EC NOTEXT
      CATCH cx_root.
        value = '-CONVERSION FAILED-'.                  "#EC NOTEXT
    ENDTRY.
    if value is initial.
     value = 'Your default value'.
    endif.
endmethod.
Regards,
Fabian

How to set a default value in a Value Help Drop Down List

Hi,
I used an age Range field in my adobe form, the control is a Value Help Drop Down List. i am populating the drop down using following code.
IWDAttributeInfo ageInfo = wdContext.nodePersonalData().getNodeInfo().getAttribute("CTAgeRange");
     ISimpleTypeModifiable ageType = ageInfo.getModifiableSimpleType();
     IModifiableSimpleValueSet ageValueSet = ageType.getSVServices().getModifiableSimpleValueSet();
     ageValueSet.put("1","21-29");
     ageValueSet.put("2","30-34");
     ageValueSet.put("3","35 or Above");
My requirement is to set a default value e.g. 30-34 in the age range field.
I want to give input to iform from my Implementation code only.
Please help.
Thanks in advance

hi Ranjan,
that means you have to set at design time,
to set default drop down value you will have to set the value for particular attribute (which is linked to the dropdown element) in the context
like
wdContext.currentContext<nodeName>Element.set<FieldName>(<default value>)
This generally done in Initialization method of the controller.

How to set a default value in a DateTime field?

Hi!, how do you set a default value in a DateTime field in a user table to the value of "today"?
Thank you!

It's in SAP Business One 2007, in User-Defined-Fields, under User Tables, Iam trying to add a field to a Table I created in the User-Defined-Tables-Setup menu.
I click Add then type the field name, description and then I select the Type, which is DateTime, then the SelectDefault Value For Field get's grayed out.
Thank you!

Set as default value the Item Category in the Maintenance Order

Similar Messages

Maybe you are looking for