Set default to Classic style control/indicator
Is it possible to set default to "classic style" control/indicator so that when I create a control/indicator from the block diagram, I will have a classic style control/indicator on the front panel?
Somehow, I still like the classic style control/indicator more. Many times, after I create a control/indicator from the block diagram, I have to replace the new style control/indicator with a classic style control/indicator from the front panel. It can be done, but it would be nice if I can create what I want from the block diagram directly.
Thanks.
Ian Ren
Well, to manually place a classic control, you would just go to the classic palette, no settings needed.
Have you read the detailed help for this option? Maybe it's not exactly what you think it is.
"Control Style for Create Control/Indicator—Changes the style of the control or indicator LabVIEW creates when you right-click a terminal and select Create»Control or Create»Indicator from the shortcut menu."
LabVIEW Champion . Do more with less code and in less time .
Similar Messages
-
Unable to set default fonts n style in Cisco Jabber
Unlike CUPC or WebEx Connect, no option is currently available under File -> Options for both Cisco Jabber for Windows (On Prem or Cloud deployement) to configure and set default font/size/style for Jabber.
Got an update on this. This feature is targeted in future release where we'll allow end users to change the Outgoing Font Size n Style!!
-
How to Set default value for taxonomywebtagging control with terms and nested terms
Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support -
Problem in setting default index in Tree Control
hi all,
i am using flex2.0 final release and in my application i am
calling custom function in cretionComplete event
which set the default index in Tree control...but its not
working properly in final flex meanwhile this same thing i am using
in flex beta3 ...at that time its working properly but the problem
occur only in migration time so can any body tell me what happaning
here...
code....//here MailFolderLists is id of tree control
[Bindable]
public var XLC:XML;
public function initList(event:Event) : void
if(mx.utils.ObjectUtil.toString(event.target.lastResult).indexOf("NOK")==-1)
XLC = event.target.lastResult;
if(MailFolderLists.selectedIndex==-1) //its working
MailFolderLists.selectedIndex=0; // its not working
so plz give me solution aasp..
thanks in advancethanks buddy
ur suggestion work ....
one more thing i want to know if u have any idea related to
Tree.expandItem method it will work fine in beta3 but same prob not
work perfectly in final flex.....
i am using
MailFolderLists.expandItem(MailFolderLists.selectedItem,
true);
but not work every time i want the tree in expan position
every when i add and new node/folder into it..
so give me suggestion if u have any idea...
thanks -
How to set default value for Price Change Indicator in Purchase order
Hi,
While creating the service purchase order with item category "D" the price change indicator in the services tab of the purchase order is getting checked by default. I want to uncheck this by default.Where can we set the default property for this.
Thanks in Advance!
SuryaMy plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
type vc2_255_arr is table of varchar2 (255)
index by binary_integer;
vc2_255_arr_default vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
vc2_255_arr_default (1) := 'abc';
vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
arr pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
for i in 1 .. arr.count
loop
dbms_output.put_line (arr (i));
end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %> -
Default values for the controlling area and language
Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant GokhaleHello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks. -
Set initial value for numerical control
Hello LV users,
I have a VI that is used to initialize some experimental equiptment. It passes on a cluster of ten or so numerical control DBL integers as parameters. Everytime I open the programe the values are reset back to zero and I have to enter the values back in. Is there any way to set default values for the controls so I do not have to change them everytime I open the program.
Thanks
Solved!
Go to Solution.Wowden,
If you want to set default values for multiple numeric control's in your cluster in one go,
-Type in the desired default values
- Right click on your cluster, browse to 'data operations'
- Choose 'Make current values default.
Similarly, if you need to set defaults for multiple clusters or multiple controls on your front panel,
- Choose 'Edit' in the menu
- Choose "make current values default' (This sets defaults for all controls/constants etc. in one go)
RaVI -
Set label to appear to the right of control/indicator in a block diagram
Hello,
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
PeterPeter Parker wrote:
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
If you copy&paste a control, the label will jump back to the default location for the pasted control.
There is a better way! It makes copying a control faster and retains the label location:
select the control you want to copy
hold down the [ctrl] key and drag the terminal to a new place.
You will have a copy of the original control at the new location and the label position is the same.
(Darren would probably call that a Nugget© )
LabVIEW Champion . Do more with less code and in less time . -
Can I set a default finder window style?
I would like to set a default Finder window style that will affect all windows, new and old. I am able to set my default style to list, but I want to go beyond that. I want my windows to be lists, with only certain columns visible, I want the columns to be set to specific widths, and I want the windows to open as if the green button in the corner had been pressed.
In Windows it is fairly easy to set a default Explorer window style with this level of setting. Can I do it on my Mac? Some setting I am missing, or some third party program?
Thanks!boombass wrote:
I tried your command, and after a while the Terminal window gets hung up on:
find: /dev/fd/3: Not a directory
find: /dev/fd/4: Not a directory
Just two of many that you shouldn't be worried about. These will reveal everything I know about them:
ls -al /dev/
ls -al /dev/fd/
I haven't a clue why running this is hanging up on your machine:
sudo find / -name ".DS_Store" -exec rm {} \;
As for why you're you're still having issues after setting up the initial folder, I haven't a clue, since it worked here when I had an issue with it. -
Setting default paragraph style (InDesign CS4, AppleScript)
I'm trying to set the default paragraph style to [Basic Paragraph], but this produces an error.
Setting other styles does work, what's wrong with "[Basic Paragraph]"?
tell application "Adobe InDesign CS4"
tell active document
tell text defaults
set applied paragraph style to "[Basic Paragraph]"
end tell
end tell
end tell
Thanks,
PeterAlternatively you could use:
set applied character style of text defaults to character style 1
set applied paragraph style of text defaults to paragraph style 1
Cheers
Tobias -
Set Default Values on Purchasing Scheduling Agreements
Good day All.
I need to ensure that the Confirmation Control Key(EKPO-BSTAE) , Unlimited Over delivery indicator (EKPO-UEBTK), Creation Profile (EKPO-ABUEB) and Jit indicator (EKPO-FABKZ) is automatically updated with default values when a scheduling agreement is created for a specific purchasing organisation. Please advise if this is possible via config (SPRO).
Many thanks, Yumna
Edited by: Yumna Abrahams on Aug 10, 2011 2:58 PMHi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel. -
Codes of control indicator monitor
I have a monitor model HP p1230. Shut off the screen and the light began to shine 7 short and 1 long interval. I guess this is the problem code. Can you tell me what this code means.
Peter Parker wrote:
I'm just wondering if there is anyway to set the preference in how label of a control/indicator to appear to the right of the control in a block diagram. I'm doing a lot of routine copying and pasting of controls and indicators, and the labels always appear at the top of the controls/indicators. Thanks for the tip.
If you copy&paste a control, the label will jump back to the default location for the pasted control.
There is a better way! It makes copying a control faster and retains the label location:
select the control you want to copy
hold down the [ctrl] key and drag the terminal to a new place.
You will have a copy of the original control at the new location and the label position is the same.
(Darren would probably call that a Nugget© )
LabVIEW Champion . Do more with less code and in less time . -
How do you set defaults in pages such as font and moving between cells in a table?
How do you set defaults in Pages such as font and moving between cells in a table?
Default layout and styles can be set by setting up a sheet with your settings and saving as a user template (File > Save As Template). I don't know of a way to set defaults for moving between cells in a table.
-
How to set default Header and Footer properties for PDF
Hi,
Currently we are manually setting the 'PDF and Print Control' properties for each and every dashboard. We understand that print pdf properties are controlled by pdfstyle.fst file under $SAROOTDIR\web\app\res\s_oracle10\b_mozilla_4 but don't have the exact property names to include in header and footer section.
By default, we want to include company logo, the saved name of the report/dashboard tab and created time in the header. And page# in the footer.
Where can we set these and what properties names should be used in order for these to be set for every new request/dashboard that is created.
Thanks and RegardsHi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
Maintain default revenue element in controlling area
Hi Experts,
I am doing Customer Down Payment T Code:F-29
We had PS Module implemented.
So at the time of DP i put the network and Operation/Activity Number and also put the Work Breakdown Structure Element (WBS Element)
At the Customer line item.
that time system gives me following error.
Maintain default revenue element in controlling area 1000
Message no. FI661
Diagnosis
CO down payment update is active in controlling area 1000. You must therefore maintain a default cost element and a default revenue element for down payments.
Procedure
Maintain the default cost elements for down payments for controlling area 1000 in the Project System implementation guide.
More information.
If i click on More information then it will goes to T Code: OKEP
But i am unable to no the OKEP screen what i have to assign there ?
waiting for reply.
Regards,
JHello nagesh simhadri ,
I have the answer for your problem, i think that you already solved it but the answer will be useful for the others, because i had the same problem and i found your post...
In fact, there is a customizing parameter to set:
SPRO -> PROJET SYSTEM -> Costs -> Actual costs and Forecast -> Update down payments -> Define default cost elements for down payments
or simply you can use the transaction code OKEP.
I hope that this will help someone...
Best regards,
Yassine NEJMY
Maybe you are looking for
-
How do you get itunes to start working again after you get an error 7 message
I keep getting the error 7 message when i try and open itunes i am not sure what i should do now. i have followed what they have listed on the website but it didnt change anything i am still getting the same message. HELP!!!
-
PLease help
-
Additional error handling within a production application using SQLERRM
I have an application that is already in production. What I would like to do is to add additional error detail currently captured within the SQLERRM. I would like to capture detail such as: where the error occurred ie. what procedure in which package
-
Reconfiguring JCo (Urgent Pls Help ASAP)
Dear all, My back-end CRM system is getting migrated. So IP, username, password, client will get change. Now I have currently imported 8-10 RFC models from this existing CRM system. I have one JCo configured for the same. So if i change the existing
-
Convt_no_number runtime error
Hi abapers, When i execute my zprog convt_no_number runtime error coming. in program i declared rebzg as bsid-rebzg which is char 10. this field should be either blank or vbeln value , but in table rebzg is stored as ' v ' single char value. plea