Set-DPMGlobalProperty -KnownVMMServers - DPM Powershell command fails
Hello,
I must be over looking a step and hope that someone can point out something obvious I am missing.
We are running SCDPM 2012 SP1 on a Win server 2012 and SCVMM 2012 SP1 on another Win 2012 server.
I want to setup DPM to automatically protect our VM's when they're migrated around on our Server 2012 Hyper-V hosts.
The SCDPM2012 Server has the Hyper-V role added and has the SCVMM console installed. The SCVMM console on the SCDPM server and SCVMM server are the same version 2012 SP1 Version 3.1.6018.0.
The SCDPM agent is installed on the SCVMM server. On the SCVMM server I have granted administrator rights to the SCDPM server account.
On the SCDPM server I open an Admin elevated powershell and import the dpm modules. When I then try to run Set-DPMGlobalProperty –DPMServerName MyDpmServerName -KnownVMMServers MySCVMMServerName I get the following Error.
WARNING: Connecting to DPM server: MyDPMServer
Set-DPMGlobalProperty : DPM was unable to configure and start the VmmHelperService on the DPM Server.
Server name: MyDPMServer.
Exception Message: Time out has expired and the operation has not been completed. (ID: 33399)
1) Verify that VMM Console features are installed on the DPM Server.
2) To reconfigure the VMM server in DPM, use the Set-DPMGlobalProperty cmdlet as follows:
Set-DPMGlobalProperty -DpmServerName <DPMServerName> -KnownVMMServers <VMMServerName>.
At line:2 char:1
+ Set-DPMGlobalProperty –DPMServerName schooldpm02.dundeecity.sch.uk -KnownVMMServ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-DPMGlobalProperty], DlsException
+ FullyQualifiedErrorId : FailedToConfigureVmmHelperService,Microsoft.Internal.EnterpriseStorage.Dls.UI.
Cmdlet.SetGlobalProperty
Any help would be greatly appreciated.
Cheers
Alex
The problem could be related to registry permissions. The DPM VMM Helper service should be running under the NetworkService account and it may not have read/write permissions on the key: "Software\Microsoft\Microsoft Data Protection Manager\2.0\Configuration"
Please verify the System/Network Service account has read/write permissions on this registry key and try rerunning the command.
Thanks,
Michael Vargo
-------------------- Regards, Michael V [MSFT] - This posting is provided "AS IS" with no warranties, and confers no rights.
Similar Messages
-
Executing DPM Powershell Commands
Hi All,
I am trying to execute DPM 2012 Powershell commands from a console application in c#, but at the time of Invoke it is giving me the following error.
{"Could not load file or assembly 'ACM, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.":"ACM, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"}
Below is my code.
var runspace = PShell.GetRunSpace();
if (runspace.RunspaceStateInfo.State == RunspaceState.BeforeOpen)
runspace.Open();
var pipeline = runspace.CreatePipeline();
pipeline.Commands.AddScript("$installPath = (Get-ItemProperty \"HKLM:\\SOFTWARE\\Microsoft\\Microsoft Data Protection Manager\\Setup\" \"UIInstallPath\").UIInstallPath");
pipeline.Commands.AddScript("$dpmModuleFullPath = $installPath + \"Modules\\DataProtectionManager\\DataProtectionManager.psd1\"");
pipeline.Commands.AddScript("Import-Module $dpmModuleFullPath");
pipeline.Commands.AddScript("$pg=get-protectiongroup -dpmserver dpm-2012-01");
pipeline.Commands.AddScript("$pg");
try
System.Collections.ObjectModel.Collection<PSObject> result = pipeline.Invoke();
foreach (PSObject obj in result)
var name = obj.Properties["FriendlyName"].Name;
catch (Exception e)
ilyasHi All,
I am trying to execute DPM 2012 Powershell commands from a console application in c#, but at the time of Invoke it is giving me the following error.
{"Could not load file or assembly 'ACM, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.":"ACM, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"}
Below is my code.
var runspace = PShell.GetRunSpace();
if (runspace.RunspaceStateInfo.State == RunspaceState.BeforeOpen)
runspace.Open();
var pipeline = runspace.CreatePipeline();
pipeline.Commands.AddScript("$installPath = (Get-ItemProperty \"HKLM:\\SOFTWARE\\Microsoft\\Microsoft Data Protection Manager\\Setup\" \"UIInstallPath\").UIInstallPath");
pipeline.Commands.AddScript("$dpmModuleFullPath = $installPath + \"Modules\\DataProtectionManager\\DataProtectionManager.psd1\"");
pipeline.Commands.AddScript("Import-Module $dpmModuleFullPath");
pipeline.Commands.AddScript("$pg=get-protectiongroup -dpmserver dpm-2012-01");
pipeline.Commands.AddScript("$pg");
try
System.Collections.ObjectModel.Collection<PSObject> result = pipeline.Invoke();
foreach (PSObject obj in result)
var name = obj.Properties["FriendlyName"].Name;
catch (Exception e)
ilyas
I have the very same issue, only I am running the script from within PowerGui (www.powergui.org). Was a resolution ever found for this issue?
http://blog.aggregatedIntelligence.com/ -
How to set Full Crawl Schedule as None via Powershell command
How to set Full Crawl Schedule as None via Powershell command
$ssa = "Search Service Application"
$contentSource = Get-SPEnterpriseSearchCrawlContentSource -SearchApplication $ssa -Identity "Local SharePoint Sites"
$contentSource.IncrementalCrawlSchedule = $null
$contentSource.FullCrawlSchedule = $null
$contentSource.Update()
Basically you set Schedule to Null.
Amit -
Fail to create VM using PowerShell commands
I tried to create a new VM with Public IP. The only way I found was using PowerShell.
This was the commands I used.
$vm = New-AzureVMConfig -Name "mu0035" -InstanceSize Small -ImageName "b39f27a8b8c64d52b05eac6a62ebad85__Ubuntu-14_04_1-LTS-amd64-server-20140924-en-us-30GB"| Add-AzureProvisioningConfig -Linux -LinuxUser $username -Password $password|Set-AzurePublicIP -PublicIPName "mu0035PIP"
It returns `BadRequest: The location or affinity group East Asia of the storage account where the source image b39f27a8b8c64d52b05eac6a62ebad85 resides is not in the same location as the specified cloud service ,"Southeast Asia"`.
It seems the image locate in East Asia, and I want to create VM in 'Southeast Asia'.
Interest thing is, I have already set the subscription's currentstorageaccount to a `Southeast Asia` storage account.
Get-AzureSubscription -Current
SubscriptionId : $subscription_id
SubscriptionName : BizSpark
Environment : AzureCloud
SupportedModes : AzureServiceManagement,AzureResourceManager
DefaultAccount : $account_name
Accounts : {$account_name}
IsDefault : True
IsCurrent : True
CurrentStorageAccountName : sourtheast
Get-AzureStorageAccount -StorageAccountName sourtheast
StorageAccountDescription :
AffinityGroup :
Location : Southeast Asia
GeoReplicationEnabled : True
GeoPrimaryLocation : Southeast Asia
GeoSecondaryLocation : East Asia
Label : sourtheast
StorageAccountStatus : Created
StatusOfPrimary : Available
StatusOfSecondary : Available
Endpoints : {https://sourtheast.blob.core.windows.net/, https://sourtheast.queue.core.windows.net/, https://sourtheast.table.core.windows.net/}
AccountType : Standard_GRS
StorageAccountName : sourtheast
OperationDescription : Get-AzureStorageAccount
OperationId : f1326e6e-951d-1c9c-bb4d-4a65900025bb
OperationStatus : Succeeded
I can't figure out what happened. Why the powershell command not fetching the image from a wrong location?
Please, Help!Hi, it looks as though the "StorageAccountName" is set to "sourtheast", possibly just a typo when the accountname was created?
-
Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/HenrikHi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
PowerShell command returned an exception. Unexpected token 's' in expression or statement
Hi All,
I am trying to Creating a VM based on a Template in VMM through Orchestrator Runbook using below URL;
http://blogs.catapultsystems.com/lrayl/archive/2013/07/03/orchestrator-system-center-integrations-part-3-creating-a-vm-based-on-a-template-in-vmm.aspx
Runbook:
But at the Create VM from Template activity runbook will failed:
Throwing below error in while running runbook in Error Summary text:
PowerShell command returned an exception. Unexpected token 's' in expression or statement.
Exception: InvalidOperationException
Target site: PSRunspaceInvoker.HandleInvokeException
Stack trace:
at Microsoft.SystemCenter.Orchestrator.Integration.PowerShellConnector.PSRunspaceInvoker.HandleInvokeException(Exception ex, ILogger logger)
at Microsoft.SystemCenter.Orchestrator.Integration.PowerShellConnector.PSRunspaceInvoker.Invoke(RunspaceInvoke runspace, String script, ILogger logger)
at Microsoft.SystemCenter.Orchestrator.Integration.PowerShellConnector.PSScriptRunner.Execute(String script)
at Microsoft.SystemCenter.Orchestrator.Integration.VMM2012Domain.VM.CloneFromTemplate(String vmmServer, ParameterList inputParameters)
at Microsoft.SystemCenter.Orchestrator.Integration.VMM2012QIK.VM.CloneFromTemplate.DoExecute(IActivityRequest request, ILogger logger)
at Microsoft.SystemCenter.Orchestrator.Integration.VMM2012QIK.ActivityBase`2.Execute(IActivityRequest request, IActivityResponse response)
Both Orchestrator & SCVMM powershell are set on Unrestricted powershell.
Kindly suggest any solution or work around for resolution.
Thanks Rahul$This may be a bit late and perhaps not even relevant but I came across this post when trying to solve an issue I had with a powershell script in Orchestrator. Maybe it will help you, or maybe it will help someone else.
I was trying to create a connector between SCOM and our ticketing system. I wanted to export alert descriptions and in the process of testing I came across an alert description that had multiple lines and all kinds of crazy formatting. When I tried to assign
the Published Data to a varialbe in my powershell script i would get an error "Unexpected token [a partial alert description] in expression or statement.". After looking at the actual alert description data and seeing that i was only getting some of it
and not all of it it dawned on me that i somehow needed to escape out of all the crazy quoting, carriage returns, and special characters. to do that i assigned the Published Data to a variable in my powershell script as follows:
$Description = @"
{Description from "Get Alert"}
Apparently the @" "@ is called a here-string. Somewhat interesting. Hope it helps you or someone else! -
Listing RDS 2012 R2 collections from powershell remote fails
I'm trying to list different informations of a RDS server farm => from a remote client PC <=
I do following but when typing the last command - I get an error.
Knowing that that same command runs correctly when launched from an RDS server
enter-pssession RDS-SERVER-XYZ.contoso.net
import-module remotedesktop
get-command -module remotedesktop
Get-RDSessionCollection -ConnectionBroker RDS-BRK-1.contoso.net
=> fails with message :
Cannot index into a null array.
At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\remotedesktop\Utility.psm1:54 char:9
+ if ($_script_resource[$Id])
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
Cannot index into a null array.
At C:\Windows\system32\WindowsPowerShell\v1.0\Modules\remotedesktop\Utility.psm1:54 char:9
+ if ($_script_resource[$Id])
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : NullArray
Get-RDSessionCollection :
+ CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException
+ FullyQualifiedErrorId : Microsoft.PowerShell.Commands.WriteErrorException,Get-RDSessionCollection
Listing RDS 2012 R2 collections from powershell remote fails / same commandlet from local RDS serevr works fine
Am I missing something ?
MCTS Windows Server Virtualization, ConfigurationAre the Windows Remote Management rules enabled on the inbound firewall of the RDSH server?
If you are running multiple roles on the RDSH server you may need to increase the size of the memory available for powershell remoting.
Run Set-Item WSMan:\localhost\Shell\MaxMemoryPerShellMB 1000 with powershell as an admin and reboot.
HTH,
JB -
"error: command failed to execute correctly" on several packages
Last night, when I updated before shutting down, I got a few errors, as in the subject. As it was very late, I thought I'd pick it up today.
Unfortunately, the pacman log only lists one of the ones that failed as libgpg-error. The other one that I remember erroring was gawk. There were a few others, maybe four or five, but I couln't reliably recall them all, so won't guess.
Here's a new attempt to reinstall gawk with --debug. I did the same with libgpg-error and the error occurred at the same place, with very similar output, so I think the issue is the same for all failures.
debug: pacman v4.2.1 - libalpm v9.0.1
debug: parseconfig: options pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: usedelta (default 0.7)
debug: config: arch: x86_64
debug: config: verbosepkglists
debug: config: chomp
debug: config: SigLevel: Required
debug: config: SigLevel: DatabaseOptional
debug: config: SigLevel: TrustedOnly
debug: config: LocalFileSigLevel: Optional
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 78: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: config: new section 'xyne-x86_64'
debug: config: finish section 'xyne-x86_64'
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 91: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: config: new section 'multilib'
debug: config file /etc/pacman.conf, line 100: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: config: new section 'infinality-bundle'
debug: config: finish section 'infinality-bundle'
debug: config: new section 'infinality-bundle-multilib'
debug: config: finish section 'infinality-bundle-multilib'
debug: config: new section 'infinality-bundle-fonts'
debug: config: finish section 'infinality-bundle-fonts'
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
debug: setup_libalpm called
debug: option 'logfile' = /var/log/pacman.log
debug: option 'gpgdir' = /etc/pacman.d/gnupg/
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: parseconfig: repo pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 78: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: registering sync database 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core.db
debug: "/var/lib/pacman/sync/core.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/core.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for core repoistory
debug: adding new server URL to database 'core': http://arch.tamcore.eu/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.one.com/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.gnomus.de/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.js-webcoding.de/pub/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://archlinux.polymorf.fr/core/os/x86_64
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: registering sync database 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra.db
debug: "/var/lib/pacman/sync/extra.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/extra.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for extra repoistory
debug: adding new server URL to database 'extra': http://arch.tamcore.eu/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.one.com/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.gnomus.de/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.js-webcoding.de/pub/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://archlinux.polymorf.fr/extra/os/x86_64
debug: config: new section 'xyne-x86_64'
debug: config: SigLevel: Required
debug: config: finish section 'xyne-x86_64'
debug: registering sync database 'xyne-x86_64'
debug: database path for tree xyne-x86_64 set to /var/lib/pacman/sync/xyne-x86_64.db
debug: GPGME version: 1.5.4
debug: GPGME engine info: file=/usr/bin/gpg2, home=/etc/pacman.d/gnupg/
debug: checking signature for /var/lib/pacman/sync/xyne-x86_64.db
debug: 1 signatures returned
debug: fingerprint: EC3CBE7F607D11E663149E811D1F0DC78F173680
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430676813
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: EC3CBE7F607D11E663149E811D1F0DC78F173680, Xyne. (key #3) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for xyne-x86_64 repoistory
debug: adding new server URL to database 'xyne-x86_64': http://xyne.archlinux.ca/repos/xyne
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 91: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: registering sync database 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community.db
debug: "/var/lib/pacman/sync/community.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/community.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for community repoistory
debug: adding new server URL to database 'community': http://arch.tamcore.eu/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.one.com/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.gnomus.de/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.js-webcoding.de/pub/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://archlinux.polymorf.fr/community/os/x86_64
debug: config: new section 'multilib'
debug: config file /etc/pacman.conf, line 100: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: registering sync database 'multilib'
debug: database path for tree multilib set to /var/lib/pacman/sync/multilib.db
debug: "/var/lib/pacman/sync/multilib.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/multilib.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for multilib repoistory
debug: adding new server URL to database 'multilib': http://arch.tamcore.eu/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.one.com/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.gnomus.de/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.js-webcoding.de/pub/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://archlinux.polymorf.fr/multilib/os/x86_64
debug: config: new section 'infinality-bundle'
debug: config: finish section 'infinality-bundle'
debug: registering sync database 'infinality-bundle'
debug: database path for tree infinality-bundle set to /var/lib/pacman/sync/infinality-bundle.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430276639
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle repoistory
debug: adding new server URL to database 'infinality-bundle': http://bohoomil.com/repo/x86_64
debug: config: new section 'infinality-bundle-multilib'
debug: config: finish section 'infinality-bundle-multilib'
debug: registering sync database 'infinality-bundle-multilib'
debug: database path for tree infinality-bundle-multilib set to /var/lib/pacman/sync/infinality-bundle-multilib.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle-multilib.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430087321
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle-multilib repoistory
debug: adding new server URL to database 'infinality-bundle-multilib': http://bohoomil.com/repo/multilib/x86_64
debug: config: new section 'infinality-bundle-fonts'
debug: config: finish section 'infinality-bundle-fonts'
debug: registering sync database 'infinality-bundle-fonts'
debug: database path for tree infinality-bundle-fonts set to /var/lib/pacman/sync/infinality-bundle-fonts.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle-fonts.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430276566
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle-fonts repoistory
debug: adding new server URL to database 'infinality-bundle-fonts': http://bohoomil.com/repo/fonts
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
debug: loading package cache for repository 'core'
debug: opening archive /var/lib/pacman/sync/core.db
debug: added 208 packages to package cache for db 'core'
debug: adding package 'gawk'
debug: loading package cache for repository 'local'
debug: added 1122 packages to package cache for db 'local'
warning: gawk-4.1.2-1 is up to date -- reinstalling
debug: adding package gawk-4.1.2-1 to the transaction add list
resolving dependencies...
debug: resolving target's dependencies
debug: started resolving dependencies
debug: checkdeps: package gawk-4.1.2-1
debug: finished resolving dependencies
looking for conflicting packages...
debug: looking for conflicts
debug: check targets vs targets
debug: check targets vs targets
debug: check targets vs db and db vs targets
debug: check targets vs db
debug: check db vs targets
debug: checking dependencies
debug: checkdeps: package gawk-4.1.2-1
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg gawk
debug: sorting by dependencies
debug: started sorting dependencies
debug: sorting dependencies finished
Package (1) Old Version New Version Net Change
core/gawk 4.1.2-1 4.1.2-1 0.00 MiB
Total Installed Size: 2.19 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
debug: using cachedir: /var/cache/pacman/pkg/
debug: using cachedir: /var/cache/pacman/pkg/
checking keyring...
debug: looking up key 771DF6627EDF681F locally
debug: key lookup success, key exists
checking package integrity...
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABCAAGBQJVQNc+AAoJEHcd9mJ+32gfQZgH/jkRiirmPTb4nE0xgcFGKc8wrxw3k9ooGyMFoeqAthTICB/5dBzNfEQ8b4X74gi8KiYQVYm4WE8kWIidUj5ekJhGwngO6Gk+lwyBq+Uh8rUHDJKw557fImM2bBah2lxNUxqZzxYTA1FByq2lptLB5EPJgAPemyUXACMXITDfqtWMpuHIEPLZi5WW9+cB0eMKz5IeEEfZi4lO2fyfRqxNkRDNSmC5NEDkfhm+XVXBEd4gugSOmYpKzlA67mjw2HP+oOyNheL8st4SjgFr/qVDdbfiBbaTTujC4mF1n73z5qp4K5/xgHqk42ftoo003XFQYVOAg3bDWMvUF5d63D4+HKg=
debug: checking signature for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 5B7E3FB71B7F10329A1C03AB771DF6627EDF681F
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430312766
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 5B7E3FB71B7F10329A1C03AB771DF6627EDF681F, Tobias Powalowski <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
loading package files...
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: replacing pkgcache entry with package file for target gawk
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: starting package load for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: found mtree for package /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz, getting file list
debug: finished mtree reading for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: sorting package filelist for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
checking for file conflicts...
debug: looking for file conflicts
debug: searching for file conflicts: gawk
debug: searching for filesystem conflicts: gawk
checking available disk space...
debug: checking available disk space
debug: discovered mountpoint: /tmp
debug: discovered mountpoint: /sys/kernel/security
debug: discovered mountpoint: /sys/kernel/debug
debug: discovered mountpoint: /sys/kernel/config
debug: discovered mountpoint: /sys/fs/pstore
debug: discovered mountpoint: /sys/fs/cgroup/systemd
debug: discovered mountpoint: /sys/fs/cgroup/net_cls
debug: discovered mountpoint: /sys/fs/cgroup/memory
debug: discovered mountpoint: /sys/fs/cgroup/freezer
debug: discovered mountpoint: /sys/fs/cgroup/devices
debug: discovered mountpoint: /sys/fs/cgroup/cpuset
debug: discovered mountpoint: /sys/fs/cgroup/cpu,cpuacct
debug: discovered mountpoint: /sys/fs/cgroup/blkio
debug: discovered mountpoint: /sys/fs/cgroup
debug: discovered mountpoint: /sys
debug: discovered mountpoint: /run/user/1000
debug: discovered mountpoint: /run
debug: discovered mountpoint: /proc/sys/fs/binfmt_misc
debug: discovered mountpoint: /proc
debug: discovered mountpoint: /home/skanky/personal
debug: discovered mountpoint: /home
debug: discovered mountpoint: /dev/shm
debug: discovered mountpoint: /dev/pts
debug: discovered mountpoint: /dev/mqueue
debug: discovered mountpoint: /dev/hugepages
debug: discovered mountpoint: /dev
debug: discovered mountpoint: /
debug: loading fsinfo for /
debug: partition /, needed 0, cushion 5121, free 1174711
debug: installing packages
reinstalling gawk...
debug: reinstalling package gawk-4.1.2-1
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: extracting: .INSTALL
debug: removing old package first (gawk-4.1.2-1)
debug: removing 110 files
debug: unlinking /usr/share/man/man3/time.3am.gz
debug: unlinking /usr/share/man/man3/rwarray.3am.gz
debug: unlinking /usr/share/man/man3/revtwoway.3am.gz
debug: unlinking /usr/share/man/man3/revoutput.3am.gz
debug: unlinking /usr/share/man/man3/readfile.3am.gz
debug: unlinking /usr/share/man/man3/readdir.3am.gz
debug: unlinking /usr/share/man/man3/ordchr.3am.gz
debug: unlinking /usr/share/man/man3/inplace.3am.gz
debug: unlinking /usr/share/man/man3/fork.3am.gz
debug: unlinking /usr/share/man/man3/fnmatch.3am.gz
debug: unlinking /usr/share/man/man3/filefuncs.3am.gz
debug: keeping directory /usr/share/man/man3/ (contains files)
debug: unlinking /usr/share/man/man1/igawk.1.gz
debug: unlinking /usr/share/man/man1/gawk.1.gz
debug: keeping directory /usr/share/man/man1/ (contains files)
debug: keeping directory /usr/share/man/ (contains files)
debug: unlinking /usr/share/locale/vi/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/vi/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/vi/ (contains files)
debug: unlinking /usr/share/locale/sv/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/sv/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/sv/ (contains files)
debug: unlinking /usr/share/locale/pl/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/pl/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/pl/ (contains files)
debug: unlinking /usr/share/locale/nl/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/nl/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/nl/ (contains files)
debug: unlinking /usr/share/locale/ms/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ms/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ms/ (contains files)
debug: unlinking /usr/share/locale/ja/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ja/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ja/ (contains files)
debug: unlinking /usr/share/locale/it/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/it/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/it/ (contains files)
debug: unlinking /usr/share/locale/fr/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/fr/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/fr/ (contains files)
debug: unlinking /usr/share/locale/fi/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/fi/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/fi/ (contains files)
debug: unlinking /usr/share/locale/es/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/es/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/es/ (contains files)
debug: unlinking /usr/share/locale/de/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/de/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/de/ (contains files)
debug: unlinking /usr/share/locale/da/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/da/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/da/ (contains files)
debug: unlinking /usr/share/locale/ca/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ca/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ca/ (contains files)
debug: keeping directory /usr/share/locale/ (contains files)
debug: unlinking /usr/share/info/gawkinet.info.gz
debug: unlinking /usr/share/info/gawk.info.gz
debug: keeping directory /usr/share/info/ (contains files)
debug: unlinking /usr/share/awk/zerofile.awk
debug: unlinking /usr/share/awk/walkarray.awk
debug: unlinking /usr/share/awk/strtonum.awk
debug: unlinking /usr/share/awk/shellquote.awk
debug: unlinking /usr/share/awk/round.awk
debug: unlinking /usr/share/awk/rewind.awk
debug: unlinking /usr/share/awk/readfile.awk
debug: unlinking /usr/share/awk/readable.awk
debug: unlinking /usr/share/awk/quicksort.awk
debug: unlinking /usr/share/awk/processarray.awk
debug: unlinking /usr/share/awk/passwd.awk
debug: unlinking /usr/share/awk/ord.awk
debug: unlinking /usr/share/awk/noassign.awk
debug: unlinking /usr/share/awk/libintl.awk
debug: unlinking /usr/share/awk/join.awk
debug: unlinking /usr/share/awk/inplace.awk
debug: unlinking /usr/share/awk/group.awk
debug: unlinking /usr/share/awk/gettime.awk
debug: unlinking /usr/share/awk/getopt.awk
debug: unlinking /usr/share/awk/ftrans.awk
debug: unlinking /usr/share/awk/ctime.awk
debug: unlinking /usr/share/awk/cliff_rand.awk
debug: unlinking /usr/share/awk/bits2str.awk
debug: unlinking /usr/share/awk/assert.awk
debug: keeping directory /usr/share/awk/ (in new package)
debug: keeping directory /usr/share/ (contains files)
debug: unlinking /usr/lib/gawk/time.so
debug: unlinking /usr/lib/gawk/testext.so
debug: unlinking /usr/lib/gawk/rwarray.so
debug: unlinking /usr/lib/gawk/revtwoway.so
debug: unlinking /usr/lib/gawk/revoutput.so
debug: unlinking /usr/lib/gawk/readfile.so
debug: unlinking /usr/lib/gawk/readdir.so
debug: unlinking /usr/lib/gawk/ordchr.so
debug: unlinking /usr/lib/gawk/inplace.so
debug: unlinking /usr/lib/gawk/fork.so
debug: unlinking /usr/lib/gawk/fnmatch.so
debug: unlinking /usr/lib/gawk/filefuncs.so
debug: keeping directory /usr/lib/gawk/ (in new package)
debug: unlinking /usr/lib/awk/pwcat
debug: unlinking /usr/lib/awk/grcat
debug: keeping directory /usr/lib/awk/ (in new package)
debug: keeping directory /usr/lib/ (contains files)
debug: unlinking /usr/include/gawkapi.h
debug: keeping directory /usr/include/ (contains files)
debug: unlinking /usr/bin/igawk
debug: unlinking /usr/bin/gawk-4.1.2
debug: unlinking /usr/bin/gawk
debug: unlinking /usr/bin/awk
debug: keeping directory /usr/bin/ (contains files)
debug: keeping directory /usr/ (contains files)
debug: removing database entry 'gawk'
debug: removing entry 'gawk' from 'local' cache
debug: extracting files
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: skipping extraction of '.PKGINFO'
debug: extracting /var/lib/pacman/local/gawk-4.1.2-1/install
debug: extracting /var/lib/pacman/local/gawk-4.1.2-1/mtree
debug: extract: skipping dir extraction of /usr/
debug: extract: skipping dir extraction of /usr/lib/
debug: extract: skipping dir extraction of /usr/share/
debug: extract: skipping dir extraction of /usr/include/
debug: extract: skipping dir extraction of /usr/bin/
debug: extracting /usr/bin/igawk
debug: extracting /usr/bin/awk
debug: extracting /usr/bin/gawk-4.1.2
debug: extracting /usr/bin/gawk
debug: extracting /usr/include/gawkapi.h
debug: extract: skipping dir extraction of /usr/share/locale/
debug: extract: skipping dir extraction of /usr/share/awk/
debug: extract: skipping dir extraction of /usr/share/info/
debug: extract: skipping dir extraction of /usr/share/man/
debug: extract: skipping dir extraction of /usr/share/man/man3/
debug: extract: skipping dir extraction of /usr/share/man/man1/
debug: extracting /usr/share/man/man1/gawk.1.gz
debug: extracting /usr/share/man/man1/igawk.1.gz
debug: extracting /usr/share/man/man3/filefuncs.3am.gz
debug: extracting /usr/share/man/man3/fnmatch.3am.gz
debug: extracting /usr/share/man/man3/fork.3am.gz
debug: extracting /usr/share/man/man3/inplace.3am.gz
debug: extracting /usr/share/man/man3/ordchr.3am.gz
debug: extracting /usr/share/man/man3/readdir.3am.gz
debug: extracting /usr/share/man/man3/readfile.3am.gz
debug: extracting /usr/share/man/man3/revoutput.3am.gz
debug: extracting /usr/share/man/man3/revtwoway.3am.gz
debug: extracting /usr/share/man/man3/rwarray.3am.gz
debug: extracting /usr/share/man/man3/time.3am.gz
debug: extracting /usr/share/info/gawk.info.gz
debug: extracting /usr/share/info/gawkinet.info.gz
debug: extracting /usr/share/awk/zerofile.awk
debug: extracting /usr/share/awk/walkarray.awk
debug: extracting /usr/share/awk/strtonum.awk
debug: extracting /usr/share/awk/shellquote.awk
debug: extracting /usr/share/awk/round.awk
debug: extracting /usr/share/awk/rewind.awk
debug: extracting /usr/share/awk/readfile.awk
debug: extracting /usr/share/awk/readable.awk
debug: extracting /usr/share/awk/quicksort.awk
debug: extracting /usr/share/awk/processarray.awk
debug: extracting /usr/share/awk/ord.awk
debug: extracting /usr/share/awk/noassign.awk
debug: extracting /usr/share/awk/libintl.awk
debug: extracting /usr/share/awk/join.awk
debug: extracting /usr/share/awk/inplace.awk
debug: extracting /usr/share/awk/gettime.awk
debug: extracting /usr/share/awk/getopt.awk
debug: extracting /usr/share/awk/ftrans.awk
debug: extracting /usr/share/awk/ctime.awk
debug: extracting /usr/share/awk/cliff_rand.awk
debug: extracting /usr/share/awk/bits2str.awk
debug: extracting /usr/share/awk/assert.awk
debug: extracting /usr/share/awk/group.awk
debug: extracting /usr/share/awk/passwd.awk
debug: extract: skipping dir extraction of /usr/share/locale/vi/
debug: extract: skipping dir extraction of /usr/share/locale/sv/
debug: extract: skipping dir extraction of /usr/share/locale/pl/
debug: extract: skipping dir extraction of /usr/share/locale/nl/
debug: extract: skipping dir extraction of /usr/share/locale/ms/
debug: extract: skipping dir extraction of /usr/share/locale/ja/
debug: extract: skipping dir extraction of /usr/share/locale/it/
debug: extract: skipping dir extraction of /usr/share/locale/fr/
debug: extract: skipping dir extraction of /usr/share/locale/fi/
debug: extract: skipping dir extraction of /usr/share/locale/es/
debug: extract: skipping dir extraction of /usr/share/locale/de/
debug: extract: skipping dir extraction of /usr/share/locale/da/
debug: extract: skipping dir extraction of /usr/share/locale/ca/
debug: extract: skipping dir extraction of /usr/share/locale/ca/LC_MESSAGES/
debug: extracting /usr/share/locale/ca/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/da/LC_MESSAGES/
debug: extracting /usr/share/locale/da/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/de/LC_MESSAGES/
debug: extracting /usr/share/locale/de/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/es/LC_MESSAGES/
debug: extracting /usr/share/locale/es/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/fi/LC_MESSAGES/
debug: extracting /usr/share/locale/fi/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/fr/LC_MESSAGES/
debug: extracting /usr/share/locale/fr/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/it/LC_MESSAGES/
debug: extracting /usr/share/locale/it/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/ja/LC_MESSAGES/
debug: extracting /usr/share/locale/ja/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/ms/LC_MESSAGES/
debug: extracting /usr/share/locale/ms/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/nl/LC_MESSAGES/
debug: extracting /usr/share/locale/nl/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/pl/LC_MESSAGES/
debug: extracting /usr/share/locale/pl/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/sv/LC_MESSAGES/
debug: extracting /usr/share/locale/sv/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/vi/LC_MESSAGES/
debug: extracting /usr/share/locale/vi/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/lib/gawk/
debug: extract: skipping dir extraction of /usr/lib/awk/
debug: extracting /usr/lib/awk/pwcat
debug: extracting /usr/lib/awk/grcat
debug: extracting /usr/lib/gawk/filefuncs.so
debug: extracting /usr/lib/gawk/fnmatch.so
debug: extracting /usr/lib/gawk/fork.so
debug: extracting /usr/lib/gawk/inplace.so
debug: extracting /usr/lib/gawk/ordchr.so
debug: extracting /usr/lib/gawk/readdir.so
debug: extracting /usr/lib/gawk/readfile.so
debug: extracting /usr/lib/gawk/revoutput.so
debug: extracting /usr/lib/gawk/revtwoway.so
debug: extracting /usr/lib/gawk/rwarray.so
debug: extracting /usr/lib/gawk/testext.so
debug: extracting /usr/lib/gawk/time.so
debug: updating database
debug: adding database entry 'gawk'
debug: writing gawk-4.1.2-1 DESC information back to db
debug: writing gawk-4.1.2-1 FILES information back to db
debug: adding entry 'gawk' in 'local' cache
debug: executing ". /tmp/alpm_r21DA5/.INSTALL; post_upgrade 4.1.2-1 4.1.2-1"
debug: executing "/usr/bin/bash" under chroot "/"
debug: call to waitpid succeeded
error: command failed to execute correctly
debug: running ldconfig
debug: executing "/usr/bin/ldconfig" under chroot "/"
debug: call to waitpid succeeded
debug: unregistering database 'local'
debug: freeing package cache for repository 'local'
debug: unregistering database 'core'
debug: freeing package cache for repository 'core'
debug: unregistering database 'extra'
debug: unregistering database 'xyne-x86_64'
debug: unregistering database 'community'
debug: unregistering database 'multilib'
debug: unregistering database 'infinality-bundle'
debug: unregistering database 'infinality-bundle-multilib'
debug: unregistering database 'infinality-bundle-fonts'
pacman thinks the upgrade/reinstall was successful in that the latest version is installed.
I did a search on the forums and the only other issue that I thought was connected might be microcode not up to date, but I had followed the update instructions some time back and as far as I can tell, the microcode is up to date.
I have two main questions:
1) How do I work out what's causing the error, from above?
2) Is there a way I can work out which packages gave the error, so I can make sure they're installed properly?
Thanks.The following packages also had problems
( 2/17) upgrading glibc
error: command failed to execute correctly
( 3/17) upgrading binutils
error: command failed to execute correctly
( 4/17) upgrading coreutils
error: command failed to execute correctly
( 8/17) upgrading gcc
error: command failed to execute correctly
( 9/17) upgrading gcc-fortran
error: command failed to execute correctly
(10/17) upgrading gcc-libs
error: command failed to execute correctly
Does anybody have a clue?
Thanks, -
Error while compiling BerkeleyDB: Command failed for target `util_sig.lo'
Hi,
While trying to compile BerkeleyDB on Solaris 10 x86 ( is there an easier way to get BerkeleyDB running than compiling from source? ) I was confronted with the error message appended.
I used Berkeley 4.4.20 and configured by executing
PATH=/usr/ccs/bin:${PATH} # for ar
cd build_unix
CC=gcc ../dist/configure
Here the error message:
UNIX /app/berkeleydb/db/4.4.20/build_unix
$ make
/usr/bin/sh ./libtool --mode=compile gcc -c -I. -I../dist/.. -D_REENTRANT -O2 ../common/util_sig.c
gcc -c -I. -I../dist/.. -D_REENTRANT -O2 ../common/util_sig.c -fPIC -DPIC -o .libs/util_sig.o
In file included from /usr/include/sys/signal.h:34,
from /usr/include/signal.h:26,
from ../common/util_sig.c:15:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/signal.h:26,
from ../common/util_sig.c:15:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../common/util_sig.c:15:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `util_sig.lo'
Thanks, Dietrich
PS:
I need the LDAP server for playing with a JAAS LDAP login module and something minimal would be enough. Is there something easier to install than OpenLDAP?I fail to understand why you're taking all this trouble. Both the Berkeley DB as OpenLDAP are both shipped with Solaris 10/x86 natively. Look into the so called companion cd / dvd. That makes setting all of this up a piece of cake.
Another option could be looking into Blastwave or Sun Freeware. -
Error while Seq vlc in powershell command line.
Hi Team,
when i am trying to seq Vlc i got below error in power shell.
i have entered below command lines in powershell
1. cd c:\install
2. Set-ExecutionPolicy Unrestricted
3. New-AppvSequencerPackage -FullLoad -Installer "C:\Install\vlc-2.1.3-win32.exe" -Name "Unknown_VLC_2.1.3_01_W7_32_A" -Pa
th C:\Packages -PrimaryVirtualApplicationDirectory "C:\Windows" -TemplateFilePath .\AppV5SequencerTemplate.appvt -Verbo
se
after it's called "C:\Install\vlc-2.1.3-win32.exe", i did default install and clicked close button.
after 5 mint's i got below error.
could you please help me to solve.
1. AppV5SequencerTemplate.appvt file present in c:\installer folder
2. c:\packages folder created
Thanks in Advance :)
Ramesh
PS C:\Install> New-AppvSequencerPackage -FullLoad -Installer "C:\Install\vlc-2.1.3-win32.exe" -Name "Unknown_VLC_2.1.3_01_W7_32_A" -Pa
th C:\Packages -PrimaryVirtualApplicationDirectory "C:\Windows" -TemplateFilePath .\AppV5SequencerTemplate.appvt -Verbo
se
Unhandled Exception: System.AccessViolationException: Attempted to read or write protected memory. This is often an indi
cation that other memory is corrupt.
at PE.ComputeMinFileRanges(PE* )
at ResolveDependencies(IPackageFile file, IEnumerable`1 files, Func`4 fnGetDependencyPathFromName, Func`2 fnGetLocalP
athOfPackageFile, HashSet`1 dependencies, HashSet`1 visited)
at Microsoft.ApplicationVirtualization.Packaging.PEScanner.BuildDependencies(IEnumerable`1 allPackageFiles, Func`2 pr
edicate, Func`4 fnGetDependencyPathFromName, Func`2 fnGetLocalPathOfPackageFile)
at Microsoft.ApplicationVirtualization.Packaging.StaticDependencyPackagingSubsystem.<>c__DisplayClass8.<.ctor>b__0(Ob
ject sender, CommonPreEventArgs args)
at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.OnFinalizePackage(Func`1 writerFactory)
at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<>c__DisplayClass18.<FinalizePackage>b__12()
at Microsoft.ApplicationVirtualization.Packaging.WithAppCorruptionCheck.Execute(Action execute, Action`1 logCorruptio
n)
at Microsoft.ApplicationVirtualization.Packaging.WithAppCorruptionCheck.Execute(Action execute)
at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.<>c__DisplayClass18.<FinalizePackage>b__11()
at Microsoft.ApplicationVirtualization.Packaging.ExceptionGuard`1.Guard(Action logStart, Action execute, Action logEn
d, Action`1 exceptionAction)
at Microsoft.ApplicationVirtualization.Packaging.PackagingEngine.FinalizePackage(Func`1 writerFactory)
at Microsoft.ApplicationVirtualization.Packaging.Packager.FinalizePackage(IPackageFiles packageFiles, String manifest
Path, String registryHivePath, String streamMapPath, String packageHistoryPath, String installPath, String installShortP
ath, String packagePath, CompressionOption compression, Predicate`1 addFileToPublishingFeatureBlock, PackagingEngineType
engineType, PackagerParameters packageParameters)
at Microsoft.ApplicationVirtualization.Packaging.Sequencing.PackagerAdapter.FinalizePackage(IPackageFiles packageFile
s, String manifestPath, String registryHivePath, String streamMapPath, String packageHistoryPath, String installPath, St
ring packagePath, CompressionOption compression, PackagerParameters packagerParameters)
at Microsoft.ApplicationVirtualization.Packaging.Sequencing.PackagerOrchestrator.FinalizePackage(String streamMapPath
, String packagePath, String manifestPath, String registryHivePath, String packageHistoryPath, String installPath, Compr
essionOption compression, Boolean toAppendVersionNumberToFileName, PackagerParameters packagerParameters)
at Microsoft.AppV.Modernizer.Cmdlets.NewAppvSequencerPackage.CreatePackageViaInstaller(String packageName, String out
putDirectoryPath, String primaryApplicationVirtualDirectory, String installer, String templatePath, Boolean fullLoad, Fu
nc`1 fnSequencerFactory, Func`2 fnMonitoringSessionManagerFactory, Func`1 fnSequencerStateFactory, Func`2 fnTaskScannerA
dapterFactory, Func`2 fnPackagerOrchestratorFactory, Func`1 fnSequencerTemplateFactory, Func`2 fnExclusionListFactory, A
ction`1 fnWait, Action fnConfigurePrivileges, Func`2 fnOutputDirectoryExists, Func`2 fnOutputSubdirExists, Action`1 fnCr
eateDirectory)
at Microsoft.AppV.Modernizer.Cmdlets.NewAppvSequencerPackage.CreatePackageViaInstaller(String packageName, String out
putDirectoryPath, String primaryApplicationVirtualDirectory, String installer, String templatePath, Boolean fullLoad)
at Microsoft.AppV.Modernizer.Cmdlets.NewAppvSequencerPackage.NewPackage()
at Microsoft.AppV.Modernizer.Cmdlets.NewAppvSequencerPackage.<ProcessRecord>b__1()
at Microsoft.AppV.Modernizer.Cmdlets.ExceptionGuard.Guard(Action logStart, Action execute, Action logEnd, Action`1 er
rorAction)
at Microsoft.AppV.Modernizer.Cmdlets.NewAppvSequencerPackage.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
at System.Management.Automation.CommandProcessorBase.DoExecute()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorR
esults, Boolean enumerate)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInterna
l[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcCo
ntext)
at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0)
at System.Management.Automation.ScriptBlock.InvokeWithPipeImpl(ScriptBlockClauseToInvoke clauseToInvoke, Boolean crea
teLocalScope, Dictionary`2 functionsToDefine, List`1 variablesToDefine, ErrorHandlingBehavior errorHandlingBehavior, Obj
ect dollarUnder, Object input, Object scriptThis, Pipe outputPipe, InvocationInfo invocationInfo, Object[] args)
at System.Management.Automation.ScriptBlock.<>c__DisplayClassa.<InvokeWithPipe>b__8()
at System.Management.Automation.Runspaces.RunspaceBase.RunActionIfNoRunningPipelinesWithThreadCheck(Action action)
at System.Management.Automation.ScriptBlock.InvokeWithPipe(Boolean useLocalScope, Dictionary`2 functionsToDefine, Lis
t`1 variablesToDefine, ErrorHandlingBehavior errorHandlingBehavior, Object dollarUnder, Object input, Object scriptThis,
Pipe outputPipe, InvocationInfo invocationInfo, Object[] args)
at System.Management.Automation.ScriptBlock.InvokeUsingCmdlet(Cmdlet contextCmdlet, Boolean useLocalScope, ErrorHandl
ingBehavior errorHandlingBehavior, Object dollarUnder, Object input, Object scriptThis, Object[] args)
at Microsoft.PowerShell.Commands.InvokeExpressionCommand.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
at System.Management.Automation.CommandProcessorBase.DoExecute()
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorR
esults, Boolean enumerate)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInterna
l[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcCo
ntext)
at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0)
at System.Management.Automation.DlrScriptCommandProcessor.RunClause(Action`1 clause, Object dollarUnderbar, Object in
putToProcess)
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstr
eamCommandsToStop)
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorR
esults, Boolean enumerate)
at System.Management.Automation.PipelineOps.InvokePipeline(Object input, Boolean ignoreInput, CommandParameterInterna
l[][] pipeElements, CommandBaseAst[] pipeElementAsts, CommandRedirection[][] commandRedirections, FunctionContext funcCo
ntext)
at System.Management.Automation.Interpreter.ActionCallInstruction`6.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.EnterTryCatchFinallyInstruction.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.Interpreter.Run(InterpretedFrame frame)
at System.Management.Automation.Interpreter.LightLambda.RunVoid1[T0](T0 arg0)
at System.Management.Automation.DlrScriptCommandProcessor.RunClause(Action`1 clause, Object dollarUnderbar, Object in
putToProcess)
at System.Management.Automation.CommandProcessorBase.DoComplete()
at System.Management.Automation.Internal.PipelineProcessor.DoCompleteCore(CommandProcessorBase commandRequestingUpstr
eamCommandsToStop)
at System.Management.Automation.Internal.PipelineProcessor.SynchronousExecuteEnumerate(Object input, Hashtable errorR
esults, Boolean enumerate)
at System.Management.Automation.Runspaces.LocalPipeline.InvokeHelper()
at System.Management.Automation.Runspaces.LocalPipeline.InvokeThreadProc()
at System.Management.Automation.Runspaces.PipelineThread.WorkerProc()
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object
state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, B
oolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
PS C:\Install>Thanks for your replay
i have re- seq'd it's working..
Thanks
Er Reddy -
Most efficient/quickest way to set NTFS permissions in PowerShell
Hello all,
Trying to figure out what the most efficient/quickest way to set NTFS permissions via PowerShell is. I am currently using ICACLS but it is taking FOREVER as I can't figure out how to make inheritance work with this command.
This has prompted me to begin looking at other options for setting NTFS permissions in PowerShell, and I wondered what everyone here likes to use for this task in PowerShell?Ah ok. Unfortunately, my ICACLS is taking FOREVER. Here is the code I'm using:
ICACLS "C:\users\[user]\Desktop\test" /grant:r ("[user]" + ':r') /T /C /Q
However:
1. I can't figure out how to make the inheritance parameter work with ICACLS
2. If I do make the inheritance parameter work with ICACLS, I still need a way to add the permission to child objects that aren't inheriting.
Any tips on how to improve performance of ICACLS?
1. icacls folder /grant GROUPNAME:(OI)(CI)(F) (i will post corrected code later, this works in CMD but not powershell couse of bracers)
2. get-childitem -recurse -force |?{$_.psiscontainer} |%{icacls ....} (or u can list only folders where inheritance is disabled and apply icacls just on them)
I think jrv and Mekac answered the first question about inheritance flags. I would just add that you probably don't want to use the /T switch with icacls.exe because that appears to set an explicit entry on all child items (that's probably why it's taking
so long).
For your second question, I'd suggest using the Get-Acl cmdlet. It throws terminating errors, so I usually wrap it in a try/catch block. Something like this might work if you just wanted the paths to files/folders that aren't inheriting permissions:
dir $Path -Recurse | ForEach-Object {
try {
Get-Acl $_.FullName | where { $_.AreAccessRulesProtected } | ForEach-Object { Convert-Path $_.Path }
catch {
Write-Error ("Get-Acl error: {0}" -f $_.Exception.Message)
return
If you're looking for speed/performance, you don't want to just use the PowerShell Access Control (PAC) module that Mike linked to above by itself. It's implemented entirely in PowerShell, so it's incredibly slow right now (unless you use it along with Get-Acl
/ see below for an example). I'm slowly working on creating a compiled version that is much faster, and I think I'm pretty close to having something that I can put in the gallery.
Since I wasn't sure which command would give you the best results, I used Measure-Command to test a few different ones. Each of the following four commands should do the exact same thing. Here are my results (note that I just ran the commands a few times
and averaged the results on a test system; this wasn't very rigorous testing):
# Make sure that this folder and user/group exist:
$Path = "D:\TestFolder"
$Principal = "TestUser"
# Native PowerShell/.NET -- Took about 15 ms
$Acl = Get-Acl $Path
$Acl.AddAccessRule((New-Object System.Security.AccessControl.FileSystemAccessRule(
$Principal,
"Read", # [System.Security.AccessControl.FileSystemRights]
"ContainerInherit, ObjectInherit", # [System.Security.AccessControl.InheritanceFlags]
"None", # [System.Security.AccessControl.PropagationFlags]
"Allow" # [System.Security.AccessControl.AccessControlType]
(Get-Item $Path).SetAccessControl($Acl)
# PAC Module 3.0 w/ PowerShell/.NET commands -- Took about 35 ms
$Acl = Get-Acl $Path | Add-AccessControlEntry -Principal $Principal -FolderRights Read -PassThru
(Get-Item $Path).SetAccessControl($Acl)
# icacls.exe -- Took about 40ms
icacls.exe $Path /grant "${Principal}:(OI)(CI)(R)"
# PAC Module 3.0 w/o Get-Acl -- Took about 350 ms
Add-AccessControlEntry -Path $Path -Principal $Principal -FolderRights Read -Force
Unless I messed something up, it looks like the native PowerShell/.NET commands are faster than icacls.exe, at least for modifying a single folder's DACL. -
Another powershell workflow script will run in powershell ISE but no powershell command prompt.
Hi,
Im having some issue with a few powershell workflow scripts that will work in powershell ISE but they will appear to not run in a Admin powershell command prompt session.
The script is simple.
Workflow NewUser
Param (
[Parameter(Mandatory=$True)]
[string] $givenname,
[Parameter(Mandatory=$True)]
[string] $surname,
[Parameter(Mandatory=$True)]
[string] $template
"Param1 = $givenname"
"Param2 = $surname"
"Param3 = $template"
The saved file name is NewUser.ps1.
When I run .\NewUser.ps1 -givenname test -surname test -template test
Nothing happens. In Powershell ISE, it outputs
Param1 = test
Param2 = test
Template = test
I can run .\NewUser.ps1 skdjfsdkfjsdkfjsdkfj in powershell command
and nothing happens.
I notice this behavior with a number of scripts that I get working with ISE and they dont work in powershell command prompt.
We are using Powershell 4.0
Thanks LanceWhen I run
Set-psdebug -step
then newuser.ps1 -givename test -surname test -template test
it gets to the line workflow newuser and quits
am I missing some dependency?
Running [System.Threading.Thread]::GetDomain().GetAssemblies() in powershell commmand returns the following.
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.ConsoleHost\v4.0_3.0.0.0__31bf...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.C...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\Syst...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xm...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d5...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\Sy...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__3...
False v4.0.30319
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration.Install\v4.0_4.0.0.0__b03f5f7f...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\Sy...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Security\v4.0_3.0.0.0__31bf385...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Activities\v4.0_3.0.0.0__31bf3...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\Sy...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Workflow.ServiceCore\v4.0_3.0....
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities.Presentation\v4.0_4.0.0.0__31bf38...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework\v4.0_4.0.0.0__31bf3856ad364e3...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\WindowsBase\v4.0_4.0.0.0__31bf3856ad364e35\WindowsB...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\PresentationCore\v4.0_4.0.0.0__31bf3856ad364e35\Prese...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.X...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Core.Activities\v4.0_3.0.0.0__...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Diagnostics.Activities\v4.0_3....
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Management.Activities\v4.0_3.0...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Security.Activities\v4.0_3.0.0...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Utility.Activities\v4.0_3.0.0....
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.WSMan.Management.Activities\v4.0_3.0.0.0_...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.DurableInstancing\v4.0_4.0.0.0__31bf...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf385...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Dat...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Commands.Utility\v4.0_3.0.0.0_...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\Syst...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Mic...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Commands.Management\v4.0_3.0.0...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Dynamic\v4.0_4.0.0.0__b03f5f7f11d50a3a\Syste...
and for the ISE it returns this
GAC Version Location
True v4.0.30319 C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
False v4.0.30319 C:\Windows\System32\WindowsPowerShell\v1.0\powershell_ise.exe
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.ISECommon\v4.0_3.0.0.0__31bf3856ad364e35\Mic...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Windows.Forms\v4.0_4.0.0.0__b77a5c561934e089\System.Window...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\Syste...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.GPowerShell\v4.0_3.0.0.0__31bf3856ad364e35\M...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ComponentModel.Composition\v4.0_4.0.0.0__b77a5c561934e089\...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Editor\v4.0_3.0.0.0__31bf3856ad364e35\Micros...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework\v4.0_4.0.0.0__31bf3856ad364e35\Presentation...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\WindowsBase\v4.0_4.0.0.0__31bf3856ad364e35\WindowsBase.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\PresentationCore\v4.0_4.0.0.0__31bf3856ad364e35\PresentationCore.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xaml\v4.0_4.0.0.0__b77a5c561934e089\System.Xaml.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Config...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\Syste...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\UIAutomationProvider\v4.0_4.0.0.0__31bf3856ad364e35\UIAutomationP...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Accessibility\v4.0_4.0.0.0__b03f5f7f11d50a3a\Accessibility.dll
False v4.0.30319
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Di...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Managemen...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e3...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
False v4.0.30319
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework.AeroLite\v4.0_4.0.0.0__31bf3856ad364e35\Pre...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\UIAutomationTypes\v4.0_4.0.0.0__31bf3856ad364e35\UIAutomationType...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework-SystemXml\v4.0_4.0.0.0__b77a5c561934e089\Pr...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration.Install\v4.0_4.0.0.0__b03f5f7f11d50a3a\Syste...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transacti...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Security\v4.0_3.0.0.0__31bf3856ad364e35\Micr...
False v4.0.30319
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.GraphicalHost\v4.0_3.0.0.0__31bf3856ad364e35...
False v4.0.30319
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework-SystemCore\v4.0_4.0.0.0__b77a5c561934e089\P...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Commands.Utility\v4.0_3.0.0.0__31bf3856ad364...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework-SystemData\v4.0_4.0.0.0__b77a5c561934e089\P...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Commands.Management\v4.0_3.0.0.0__31bf3856ad...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Servi...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.CSharp\v4.0_4.0.0.0__b03f5f7f11d50a3a\Microsoft.CSharp.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Activities\v4.0_3.0.0.0__31bf3856ad364e35\Mi...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities\v4.0_4.0.0.0__31bf3856ad364e35\System.Activitie...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Workflow.ServiceCore\v4.0_3.0.0.0__31bf3856a...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Activities.Presentation\v4.0_4.0.0.0__31bf3856ad364e35\Sys...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Core.Activities\v4.0_3.0.0.0__31bf3856ad364e...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Diagnostics.Activities\v4.0_3.0.0.0__31bf385...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Management.Activities\v4.0_3.0.0.0__31bf3856...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Security.Activities\v4.0_3.0.0.0__31bf3856ad...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.PowerShell.Utility.Activities\v4.0_3.0.0.0__31bf3856ad3...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.WSMan.Management.Activities\v4.0_3.0.0.0__31bf3856ad364...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.DurableInstancing\v4.0_4.0.0.0__31bf3856ad364e35\S...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\Syst...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\PresentationFramework-SystemXmlLinq\v4.0_4.0.0.0__b77a5c561934e08...
True v4.0.30319 C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Dynamic\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Dynamic.dll
Thanks Lance -
How do I set Force Encryption using PowerShell
I have to automate the task of setting Force Encryption (within Properties under SQL Server Configuration Manager, Network Configuration, Protocols for MSSQLSERVER). Do you know the PowerShell command to set Force Encryption to Yes? Any help would be appreciated.
I can see some TCP configurations with this command, but I cannot see the Properties:
$MachineObject = new-object ('Microsoft.SqlServer.Management.Smo.WMI.ManagedComputer');
$ProtocolUri = "ManagedComputer[@Name='" + (get-item env:\computername).Value + "']/ServerInstance[@Name='MSSQLSERVER']/ServerProtocol";
$tcp = $MachineObject.getsmoobject($ProtocolUri + "[@Name='Tcp']");$tcp;I had to use a registry hack to change this value. Unfortunately, it is not the best way to make changes to an SQL server:
$RegKey = "HKLM:\Software\Microsoft\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQLServer\SuperSocketNetLib";
Set-ItemProperty -path $RegKey -name ForceEncryption -value "1"; -
Run powershell commands on a bat file
Hello,
I can call powershell on command line as below:
C:\>echo I am in Command Shell
I am in Command Shell
C:\>powershell
Windows PowerShell
Copyright (C) 2009 Microsoft Corporation. All rights reserved.
PS C:\> Write-Host I am in Powershell
I am in Powershell
PS C:\> exit
C:\>echo I returned to Command Shell
I returned to Command Shell
But I want to create a bat file and run these commands in bat file. To do this, I copied and pasted same codes to Test.bat file:
echo I am in Command Shell
powershell
Write-Host I am in Powershell
exit
echo I returned to Command Shell
But after "powershell" command nothing worked as below:
C:\>.\Test.bat
C:\>echo I am in Command Shell
I am in Command Shell
C:\>powershell
Windows PowerShell
Copyright (C) 2009 Microsoft Corporation. All rights reserved.
PS C:\>
I want this output:
I am in Command Shell
I am in Powershell
I returned to Command Shell
How can I handle this problem.
PS: I don't want to use powershell file (*.ps1).
ThanksIn my Test.bat file there are some commands. My Test.bat file is sth like this:
@echo off
echo I am in Command Shell
powershell.exe
Write-Host I am in Powershell
$Var = "Some words"
Write-Host My ID: $Id, String: $Var
exit
echo I returned to Command Shell
There are other different commands, such as importing modules or setting variables or configuring computer settings,.... So, I think "powershell -command" is not applicable.
In brief;
Above codes work in command line.
But when I use same codes in a batch file, nothing works in powershell. Result is sth line this:
C:\>Test.bat
I am in Command Shell
Windows PowerShell
Copyright (C) 2009 Microsoft Corporation. All rights reserved.
PS C:\> -
Hello, I am using tesseract api in my app, which run perfectly on simulator but on test devise (real devise) it is showing an error i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem
if you can't compile the webutil.pll in your forms developer you need to set the forms_builder_classpath in you windows registry. You have to add the frmwebutil.jar,jacob.jar to the registry key. The configuration files you mention are for running the forms.
Maybe you are looking for
-
My iMac and new downloaded OS X doesn´t support Airplay
I downloaded the new OS X OS and thought that Airplay also were downloaded as it were mentioned in the information regarding OS X. Could someone help me with this issue?
-
WD abap - destroy success message
Hello, I have a screen where I do the following: CALL METHOD l_message_manager->report_success EXPORTING message_text = 'Changes were successfully saved!'. when I navigate to another screen messsage area is still there but without the m
-
Running LR5 on Win7, I can't see "Visualize Spots." I select the Spot Removal tool, but the Visualize Spots option does not appear below the preview. I can turn it on with the "A" keyboard shortcut, and the display does change to show the tool in act
-
How to add ci_cobl structure to BSEG table?
i want to add ci_cobl structure to bseg table...
-
Syncing problems from my 80MB Ipod to my library
I am new to Ipods so I am hoping this is an easy question. When I plug my Ipod into the computer, click on the Music tab for my Ipod and then click on the Sync music box I get a warning message that says: "Are you sure you want to sync music? All exi