"error: command failed to execute correctly" on several packages
Last night, when I updated before shutting down, I got a few errors, as in the subject. As it was very late, I thought I'd pick it up today.
Unfortunately, the pacman log only lists one of the ones that failed as libgpg-error. The other one that I remember erroring was gawk. There were a few others, maybe four or five, but I couln't reliably recall them all, so won't guess.
Here's a new attempt to reinstall gawk with --debug. I did the same with libgpg-error and the error occurred at the same place, with very similar output, so I think the issue is the same for all failures.
debug: pacman v4.2.1 - libalpm v9.0.1
debug: parseconfig: options pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: usedelta (default 0.7)
debug: config: arch: x86_64
debug: config: verbosepkglists
debug: config: chomp
debug: config: SigLevel: Required
debug: config: SigLevel: DatabaseOptional
debug: config: SigLevel: TrustedOnly
debug: config: LocalFileSigLevel: Optional
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 78: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: config: new section 'xyne-x86_64'
debug: config: finish section 'xyne-x86_64'
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 91: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: config: new section 'multilib'
debug: config file /etc/pacman.conf, line 100: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: config: new section 'infinality-bundle'
debug: config: finish section 'infinality-bundle'
debug: config: new section 'infinality-bundle-multilib'
debug: config: finish section 'infinality-bundle-multilib'
debug: config: new section 'infinality-bundle-fonts'
debug: config: finish section 'infinality-bundle-fonts'
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
debug: setup_libalpm called
debug: option 'logfile' = /var/log/pacman.log
debug: option 'gpgdir' = /etc/pacman.d/gnupg/
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: parseconfig: repo pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 78: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: registering sync database 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core.db
debug: "/var/lib/pacman/sync/core.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/core.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for core repoistory
debug: adding new server URL to database 'core': http://arch.tamcore.eu/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.one.com/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.gnomus.de/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.js-webcoding.de/pub/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://archlinux.polymorf.fr/core/os/x86_64
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: registering sync database 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra.db
debug: "/var/lib/pacman/sync/extra.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/extra.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for extra repoistory
debug: adding new server URL to database 'extra': http://arch.tamcore.eu/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.one.com/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.gnomus.de/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.js-webcoding.de/pub/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://archlinux.polymorf.fr/extra/os/x86_64
debug: config: new section 'xyne-x86_64'
debug: config: SigLevel: Required
debug: config: finish section 'xyne-x86_64'
debug: registering sync database 'xyne-x86_64'
debug: database path for tree xyne-x86_64 set to /var/lib/pacman/sync/xyne-x86_64.db
debug: GPGME version: 1.5.4
debug: GPGME engine info: file=/usr/bin/gpg2, home=/etc/pacman.d/gnupg/
debug: checking signature for /var/lib/pacman/sync/xyne-x86_64.db
debug: 1 signatures returned
debug: fingerprint: EC3CBE7F607D11E663149E811D1F0DC78F173680
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430676813
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: EC3CBE7F607D11E663149E811D1F0DC78F173680, Xyne. (key #3) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for xyne-x86_64 repoistory
debug: adding new server URL to database 'xyne-x86_64': http://xyne.archlinux.ca/repos/xyne
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 91: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: registering sync database 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community.db
debug: "/var/lib/pacman/sync/community.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/community.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for community repoistory
debug: adding new server URL to database 'community': http://arch.tamcore.eu/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.one.com/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.gnomus.de/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.js-webcoding.de/pub/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://archlinux.polymorf.fr/community/os/x86_64
debug: config: new section 'multilib'
debug: config file /etc/pacman.conf, line 100: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: registering sync database 'multilib'
debug: database path for tree multilib set to /var/lib/pacman/sync/multilib.db
debug: "/var/lib/pacman/sync/multilib.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/multilib.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for multilib repoistory
debug: adding new server URL to database 'multilib': http://arch.tamcore.eu/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.one.com/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.gnomus.de/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.js-webcoding.de/pub/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://archlinux.polymorf.fr/multilib/os/x86_64
debug: config: new section 'infinality-bundle'
debug: config: finish section 'infinality-bundle'
debug: registering sync database 'infinality-bundle'
debug: database path for tree infinality-bundle set to /var/lib/pacman/sync/infinality-bundle.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430276639
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle repoistory
debug: adding new server URL to database 'infinality-bundle': http://bohoomil.com/repo/x86_64
debug: config: new section 'infinality-bundle-multilib'
debug: config: finish section 'infinality-bundle-multilib'
debug: registering sync database 'infinality-bundle-multilib'
debug: database path for tree infinality-bundle-multilib set to /var/lib/pacman/sync/infinality-bundle-multilib.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle-multilib.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430087321
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle-multilib repoistory
debug: adding new server URL to database 'infinality-bundle-multilib': http://bohoomil.com/repo/multilib/x86_64
debug: config: new section 'infinality-bundle-fonts'
debug: config: finish section 'infinality-bundle-fonts'
debug: registering sync database 'infinality-bundle-fonts'
debug: database path for tree infinality-bundle-fonts set to /var/lib/pacman/sync/infinality-bundle-fonts.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle-fonts.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430276566
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle-fonts repoistory
debug: adding new server URL to database 'infinality-bundle-fonts': http://bohoomil.com/repo/fonts
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
debug: loading package cache for repository 'core'
debug: opening archive /var/lib/pacman/sync/core.db
debug: added 208 packages to package cache for db 'core'
debug: adding package 'gawk'
debug: loading package cache for repository 'local'
debug: added 1122 packages to package cache for db 'local'
warning: gawk-4.1.2-1 is up to date -- reinstalling
debug: adding package gawk-4.1.2-1 to the transaction add list
resolving dependencies...
debug: resolving target's dependencies
debug: started resolving dependencies
debug: checkdeps: package gawk-4.1.2-1
debug: finished resolving dependencies
looking for conflicting packages...
debug: looking for conflicts
debug: check targets vs targets
debug: check targets vs targets
debug: check targets vs db and db vs targets
debug: check targets vs db
debug: check db vs targets
debug: checking dependencies
debug: checkdeps: package gawk-4.1.2-1
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg gawk
debug: sorting by dependencies
debug: started sorting dependencies
debug: sorting dependencies finished
Package (1) Old Version New Version Net Change
core/gawk 4.1.2-1 4.1.2-1 0.00 MiB
Total Installed Size: 2.19 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
debug: using cachedir: /var/cache/pacman/pkg/
debug: using cachedir: /var/cache/pacman/pkg/
checking keyring...
debug: looking up key 771DF6627EDF681F locally
debug: key lookup success, key exists
checking package integrity...
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABCAAGBQJVQNc+AAoJEHcd9mJ+32gfQZgH/jkRiirmPTb4nE0xgcFGKc8wrxw3k9ooGyMFoeqAthTICB/5dBzNfEQ8b4X74gi8KiYQVYm4WE8kWIidUj5ekJhGwngO6Gk+lwyBq+Uh8rUHDJKw557fImM2bBah2lxNUxqZzxYTA1FByq2lptLB5EPJgAPemyUXACMXITDfqtWMpuHIEPLZi5WW9+cB0eMKz5IeEEfZi4lO2fyfRqxNkRDNSmC5NEDkfhm+XVXBEd4gugSOmYpKzlA67mjw2HP+oOyNheL8st4SjgFr/qVDdbfiBbaTTujC4mF1n73z5qp4K5/xgHqk42ftoo003XFQYVOAg3bDWMvUF5d63D4+HKg=
debug: checking signature for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 5B7E3FB71B7F10329A1C03AB771DF6627EDF681F
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430312766
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 5B7E3FB71B7F10329A1C03AB771DF6627EDF681F, Tobias Powalowski <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
loading package files...
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: replacing pkgcache entry with package file for target gawk
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: starting package load for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: found mtree for package /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz, getting file list
debug: finished mtree reading for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: sorting package filelist for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
checking for file conflicts...
debug: looking for file conflicts
debug: searching for file conflicts: gawk
debug: searching for filesystem conflicts: gawk
checking available disk space...
debug: checking available disk space
debug: discovered mountpoint: /tmp
debug: discovered mountpoint: /sys/kernel/security
debug: discovered mountpoint: /sys/kernel/debug
debug: discovered mountpoint: /sys/kernel/config
debug: discovered mountpoint: /sys/fs/pstore
debug: discovered mountpoint: /sys/fs/cgroup/systemd
debug: discovered mountpoint: /sys/fs/cgroup/net_cls
debug: discovered mountpoint: /sys/fs/cgroup/memory
debug: discovered mountpoint: /sys/fs/cgroup/freezer
debug: discovered mountpoint: /sys/fs/cgroup/devices
debug: discovered mountpoint: /sys/fs/cgroup/cpuset
debug: discovered mountpoint: /sys/fs/cgroup/cpu,cpuacct
debug: discovered mountpoint: /sys/fs/cgroup/blkio
debug: discovered mountpoint: /sys/fs/cgroup
debug: discovered mountpoint: /sys
debug: discovered mountpoint: /run/user/1000
debug: discovered mountpoint: /run
debug: discovered mountpoint: /proc/sys/fs/binfmt_misc
debug: discovered mountpoint: /proc
debug: discovered mountpoint: /home/skanky/personal
debug: discovered mountpoint: /home
debug: discovered mountpoint: /dev/shm
debug: discovered mountpoint: /dev/pts
debug: discovered mountpoint: /dev/mqueue
debug: discovered mountpoint: /dev/hugepages
debug: discovered mountpoint: /dev
debug: discovered mountpoint: /
debug: loading fsinfo for /
debug: partition /, needed 0, cushion 5121, free 1174711
debug: installing packages
reinstalling gawk...
debug: reinstalling package gawk-4.1.2-1
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: extracting: .INSTALL
debug: removing old package first (gawk-4.1.2-1)
debug: removing 110 files
debug: unlinking /usr/share/man/man3/time.3am.gz
debug: unlinking /usr/share/man/man3/rwarray.3am.gz
debug: unlinking /usr/share/man/man3/revtwoway.3am.gz
debug: unlinking /usr/share/man/man3/revoutput.3am.gz
debug: unlinking /usr/share/man/man3/readfile.3am.gz
debug: unlinking /usr/share/man/man3/readdir.3am.gz
debug: unlinking /usr/share/man/man3/ordchr.3am.gz
debug: unlinking /usr/share/man/man3/inplace.3am.gz
debug: unlinking /usr/share/man/man3/fork.3am.gz
debug: unlinking /usr/share/man/man3/fnmatch.3am.gz
debug: unlinking /usr/share/man/man3/filefuncs.3am.gz
debug: keeping directory /usr/share/man/man3/ (contains files)
debug: unlinking /usr/share/man/man1/igawk.1.gz
debug: unlinking /usr/share/man/man1/gawk.1.gz
debug: keeping directory /usr/share/man/man1/ (contains files)
debug: keeping directory /usr/share/man/ (contains files)
debug: unlinking /usr/share/locale/vi/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/vi/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/vi/ (contains files)
debug: unlinking /usr/share/locale/sv/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/sv/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/sv/ (contains files)
debug: unlinking /usr/share/locale/pl/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/pl/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/pl/ (contains files)
debug: unlinking /usr/share/locale/nl/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/nl/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/nl/ (contains files)
debug: unlinking /usr/share/locale/ms/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ms/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ms/ (contains files)
debug: unlinking /usr/share/locale/ja/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ja/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ja/ (contains files)
debug: unlinking /usr/share/locale/it/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/it/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/it/ (contains files)
debug: unlinking /usr/share/locale/fr/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/fr/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/fr/ (contains files)
debug: unlinking /usr/share/locale/fi/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/fi/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/fi/ (contains files)
debug: unlinking /usr/share/locale/es/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/es/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/es/ (contains files)
debug: unlinking /usr/share/locale/de/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/de/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/de/ (contains files)
debug: unlinking /usr/share/locale/da/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/da/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/da/ (contains files)
debug: unlinking /usr/share/locale/ca/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ca/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ca/ (contains files)
debug: keeping directory /usr/share/locale/ (contains files)
debug: unlinking /usr/share/info/gawkinet.info.gz
debug: unlinking /usr/share/info/gawk.info.gz
debug: keeping directory /usr/share/info/ (contains files)
debug: unlinking /usr/share/awk/zerofile.awk
debug: unlinking /usr/share/awk/walkarray.awk
debug: unlinking /usr/share/awk/strtonum.awk
debug: unlinking /usr/share/awk/shellquote.awk
debug: unlinking /usr/share/awk/round.awk
debug: unlinking /usr/share/awk/rewind.awk
debug: unlinking /usr/share/awk/readfile.awk
debug: unlinking /usr/share/awk/readable.awk
debug: unlinking /usr/share/awk/quicksort.awk
debug: unlinking /usr/share/awk/processarray.awk
debug: unlinking /usr/share/awk/passwd.awk
debug: unlinking /usr/share/awk/ord.awk
debug: unlinking /usr/share/awk/noassign.awk
debug: unlinking /usr/share/awk/libintl.awk
debug: unlinking /usr/share/awk/join.awk
debug: unlinking /usr/share/awk/inplace.awk
debug: unlinking /usr/share/awk/group.awk
debug: unlinking /usr/share/awk/gettime.awk
debug: unlinking /usr/share/awk/getopt.awk
debug: unlinking /usr/share/awk/ftrans.awk
debug: unlinking /usr/share/awk/ctime.awk
debug: unlinking /usr/share/awk/cliff_rand.awk
debug: unlinking /usr/share/awk/bits2str.awk
debug: unlinking /usr/share/awk/assert.awk
debug: keeping directory /usr/share/awk/ (in new package)
debug: keeping directory /usr/share/ (contains files)
debug: unlinking /usr/lib/gawk/time.so
debug: unlinking /usr/lib/gawk/testext.so
debug: unlinking /usr/lib/gawk/rwarray.so
debug: unlinking /usr/lib/gawk/revtwoway.so
debug: unlinking /usr/lib/gawk/revoutput.so
debug: unlinking /usr/lib/gawk/readfile.so
debug: unlinking /usr/lib/gawk/readdir.so
debug: unlinking /usr/lib/gawk/ordchr.so
debug: unlinking /usr/lib/gawk/inplace.so
debug: unlinking /usr/lib/gawk/fork.so
debug: unlinking /usr/lib/gawk/fnmatch.so
debug: unlinking /usr/lib/gawk/filefuncs.so
debug: keeping directory /usr/lib/gawk/ (in new package)
debug: unlinking /usr/lib/awk/pwcat
debug: unlinking /usr/lib/awk/grcat
debug: keeping directory /usr/lib/awk/ (in new package)
debug: keeping directory /usr/lib/ (contains files)
debug: unlinking /usr/include/gawkapi.h
debug: keeping directory /usr/include/ (contains files)
debug: unlinking /usr/bin/igawk
debug: unlinking /usr/bin/gawk-4.1.2
debug: unlinking /usr/bin/gawk
debug: unlinking /usr/bin/awk
debug: keeping directory /usr/bin/ (contains files)
debug: keeping directory /usr/ (contains files)
debug: removing database entry 'gawk'
debug: removing entry 'gawk' from 'local' cache
debug: extracting files
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: skipping extraction of '.PKGINFO'
debug: extracting /var/lib/pacman/local/gawk-4.1.2-1/install
debug: extracting /var/lib/pacman/local/gawk-4.1.2-1/mtree
debug: extract: skipping dir extraction of /usr/
debug: extract: skipping dir extraction of /usr/lib/
debug: extract: skipping dir extraction of /usr/share/
debug: extract: skipping dir extraction of /usr/include/
debug: extract: skipping dir extraction of /usr/bin/
debug: extracting /usr/bin/igawk
debug: extracting /usr/bin/awk
debug: extracting /usr/bin/gawk-4.1.2
debug: extracting /usr/bin/gawk
debug: extracting /usr/include/gawkapi.h
debug: extract: skipping dir extraction of /usr/share/locale/
debug: extract: skipping dir extraction of /usr/share/awk/
debug: extract: skipping dir extraction of /usr/share/info/
debug: extract: skipping dir extraction of /usr/share/man/
debug: extract: skipping dir extraction of /usr/share/man/man3/
debug: extract: skipping dir extraction of /usr/share/man/man1/
debug: extracting /usr/share/man/man1/gawk.1.gz
debug: extracting /usr/share/man/man1/igawk.1.gz
debug: extracting /usr/share/man/man3/filefuncs.3am.gz
debug: extracting /usr/share/man/man3/fnmatch.3am.gz
debug: extracting /usr/share/man/man3/fork.3am.gz
debug: extracting /usr/share/man/man3/inplace.3am.gz
debug: extracting /usr/share/man/man3/ordchr.3am.gz
debug: extracting /usr/share/man/man3/readdir.3am.gz
debug: extracting /usr/share/man/man3/readfile.3am.gz
debug: extracting /usr/share/man/man3/revoutput.3am.gz
debug: extracting /usr/share/man/man3/revtwoway.3am.gz
debug: extracting /usr/share/man/man3/rwarray.3am.gz
debug: extracting /usr/share/man/man3/time.3am.gz
debug: extracting /usr/share/info/gawk.info.gz
debug: extracting /usr/share/info/gawkinet.info.gz
debug: extracting /usr/share/awk/zerofile.awk
debug: extracting /usr/share/awk/walkarray.awk
debug: extracting /usr/share/awk/strtonum.awk
debug: extracting /usr/share/awk/shellquote.awk
debug: extracting /usr/share/awk/round.awk
debug: extracting /usr/share/awk/rewind.awk
debug: extracting /usr/share/awk/readfile.awk
debug: extracting /usr/share/awk/readable.awk
debug: extracting /usr/share/awk/quicksort.awk
debug: extracting /usr/share/awk/processarray.awk
debug: extracting /usr/share/awk/ord.awk
debug: extracting /usr/share/awk/noassign.awk
debug: extracting /usr/share/awk/libintl.awk
debug: extracting /usr/share/awk/join.awk
debug: extracting /usr/share/awk/inplace.awk
debug: extracting /usr/share/awk/gettime.awk
debug: extracting /usr/share/awk/getopt.awk
debug: extracting /usr/share/awk/ftrans.awk
debug: extracting /usr/share/awk/ctime.awk
debug: extracting /usr/share/awk/cliff_rand.awk
debug: extracting /usr/share/awk/bits2str.awk
debug: extracting /usr/share/awk/assert.awk
debug: extracting /usr/share/awk/group.awk
debug: extracting /usr/share/awk/passwd.awk
debug: extract: skipping dir extraction of /usr/share/locale/vi/
debug: extract: skipping dir extraction of /usr/share/locale/sv/
debug: extract: skipping dir extraction of /usr/share/locale/pl/
debug: extract: skipping dir extraction of /usr/share/locale/nl/
debug: extract: skipping dir extraction of /usr/share/locale/ms/
debug: extract: skipping dir extraction of /usr/share/locale/ja/
debug: extract: skipping dir extraction of /usr/share/locale/it/
debug: extract: skipping dir extraction of /usr/share/locale/fr/
debug: extract: skipping dir extraction of /usr/share/locale/fi/
debug: extract: skipping dir extraction of /usr/share/locale/es/
debug: extract: skipping dir extraction of /usr/share/locale/de/
debug: extract: skipping dir extraction of /usr/share/locale/da/
debug: extract: skipping dir extraction of /usr/share/locale/ca/
debug: extract: skipping dir extraction of /usr/share/locale/ca/LC_MESSAGES/
debug: extracting /usr/share/locale/ca/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/da/LC_MESSAGES/
debug: extracting /usr/share/locale/da/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/de/LC_MESSAGES/
debug: extracting /usr/share/locale/de/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/es/LC_MESSAGES/
debug: extracting /usr/share/locale/es/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/fi/LC_MESSAGES/
debug: extracting /usr/share/locale/fi/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/fr/LC_MESSAGES/
debug: extracting /usr/share/locale/fr/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/it/LC_MESSAGES/
debug: extracting /usr/share/locale/it/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/ja/LC_MESSAGES/
debug: extracting /usr/share/locale/ja/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/ms/LC_MESSAGES/
debug: extracting /usr/share/locale/ms/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/nl/LC_MESSAGES/
debug: extracting /usr/share/locale/nl/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/pl/LC_MESSAGES/
debug: extracting /usr/share/locale/pl/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/sv/LC_MESSAGES/
debug: extracting /usr/share/locale/sv/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/vi/LC_MESSAGES/
debug: extracting /usr/share/locale/vi/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/lib/gawk/
debug: extract: skipping dir extraction of /usr/lib/awk/
debug: extracting /usr/lib/awk/pwcat
debug: extracting /usr/lib/awk/grcat
debug: extracting /usr/lib/gawk/filefuncs.so
debug: extracting /usr/lib/gawk/fnmatch.so
debug: extracting /usr/lib/gawk/fork.so
debug: extracting /usr/lib/gawk/inplace.so
debug: extracting /usr/lib/gawk/ordchr.so
debug: extracting /usr/lib/gawk/readdir.so
debug: extracting /usr/lib/gawk/readfile.so
debug: extracting /usr/lib/gawk/revoutput.so
debug: extracting /usr/lib/gawk/revtwoway.so
debug: extracting /usr/lib/gawk/rwarray.so
debug: extracting /usr/lib/gawk/testext.so
debug: extracting /usr/lib/gawk/time.so
debug: updating database
debug: adding database entry 'gawk'
debug: writing gawk-4.1.2-1 DESC information back to db
debug: writing gawk-4.1.2-1 FILES information back to db
debug: adding entry 'gawk' in 'local' cache
debug: executing ". /tmp/alpm_r21DA5/.INSTALL; post_upgrade 4.1.2-1 4.1.2-1"
debug: executing "/usr/bin/bash" under chroot "/"
debug: call to waitpid succeeded
error: command failed to execute correctly
debug: running ldconfig
debug: executing "/usr/bin/ldconfig" under chroot "/"
debug: call to waitpid succeeded
debug: unregistering database 'local'
debug: freeing package cache for repository 'local'
debug: unregistering database 'core'
debug: freeing package cache for repository 'core'
debug: unregistering database 'extra'
debug: unregistering database 'xyne-x86_64'
debug: unregistering database 'community'
debug: unregistering database 'multilib'
debug: unregistering database 'infinality-bundle'
debug: unregistering database 'infinality-bundle-multilib'
debug: unregistering database 'infinality-bundle-fonts'
pacman thinks the upgrade/reinstall was successful in that the latest version is installed.
I did a search on the forums and the only other issue that I thought was connected might be microcode not up to date, but I had followed the update instructions some time back and as far as I can tell, the microcode is up to date.
I have two main questions:
1) How do I work out what's causing the error, from above?
2) Is there a way I can work out which packages gave the error, so I can make sure they're installed properly?
Thanks.
The following packages also had problems
( 2/17) upgrading glibc
error: command failed to execute correctly
( 3/17) upgrading binutils
error: command failed to execute correctly
( 4/17) upgrading coreutils
error: command failed to execute correctly
( 8/17) upgrading gcc
error: command failed to execute correctly
( 9/17) upgrading gcc-fortran
error: command failed to execute correctly
(10/17) upgrading gcc-libs
error: command failed to execute correctly
Does anybody have a clue?
Thanks,
Similar Messages
-
Error when upgrading kernel (error: command failed to execute corre...
Hi, twice now when upgrading the kernel I have seen
"error: command failed to execute correctly"
in pacmans output, any ideas as to what it might be?
Bit of pacman output:
( 4/11) upgrading fontconfig [###################] 100%
updating font cache... done.
( 5/11) upgrading gpm [###################] 100%
( 6/11) upgrading linux [###################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> ERROR: file not found: `fsck.btrfs'
==> WARNING: No fsck helpers found. fsck will not be run on boot.
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: bfa
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
error: command failed to execute correctly
( 7/11) upgrading man-db [###################] 100%
( 8/11) upgrading mdadm
jason@jason-laptop ~ % sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> ERROR: file not found: `fsck.btrfs'
==> WARNING: No fsck helpers found. fsck will not be run on boot.
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: bfa
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successfulFirst search result: https://bbs.archlinux.org/viewtopic.php?id=139370
Please make some effort yourself... -
VBA 4198 error command fail with ActiveDocument.Save
I am getting 4198 error run time error with on the ActiveDocument.Save line below
If optSave.Value Then '
If save & close option selected...
'Change the status of the Normal template to unchanged. If changes were
' made to the Normal template, the changes are not saved when you exit Word.
NormalTemplate.Saved = True
' Prevent ActiveDocument from reporting that it has changed
ActiveDocument.AttachedTemplate.Saved = True
If frmAssemble.optCtlA_F9 Then
' Prevent Document too big to spell check error by setting current spell check to true.
ActiveDocument.SpellingChecked = True
ActiveDocument.ShowSpellingErrors = False
' Perform Ctrl A followed by F9 equivalent to update all the document fields
Selection.WholeStory ' Ctrl-A = Select the entire document
Selection.Fields.Update ' F9
Selection.EscapeKey ' Undo Select all
Selection.Collapse Direction:=wdCollapseStart
End If
If ActiveDocument.Revisions.Count >= 1 Then
'This should not happen
MsgBox Prompt:="Accepting " & ActiveDocument.Revisions.Count & " in " & ActiveDocument.Name & ".", _
Buttons:=vbInformation, Title:="Saving Finished Assembly"
ActiveDocument.AcceptAllRevisions
End If
' Prevent ActiveDocument from reporting that it has changed
ActiveDocument.AttachedTemplate.Saved = True
' Trap final save errors
On Error GoTo FinalSaveError
' Save the new document
ActiveDocument.Save
' Turn off Trapping
On Error GoTo 0
DeltaStopTime = Timer
DisplayStatus "Save Time: " & Elapsed(DeltaStartTime, DeltaStopTime)
'Reset Delta Start Timer
DeltaStartTime = DeltaStopTime
End If
The document contains embedded word documents and excel documents and works fine until enough other sections are added so that the created file is about 5 Meg. The final document should be 10 meg. If I remove the embedded documents it works.
If I trap the 4198 code and use resume next the first save turns to a save as. On exiting word the program will request to save multiple times. My guess is one for every object embedded (11). What is wrong?Hi RN
Could you please provide the error message you're getting? There's no convenient (public) source for error numbers and messages to look it up...
If you try to save this kind of document as an end-user do you also encounter problems? Does doing that provide any additional information about what's bothering Word?
Which version of Word is involved with the problem?
Could you please be specific about what you mean by "other sections are added": What (type of content) is being added?
Cindy Meister, VSTO/Word MVP,
my blog -
Illustrator keeps saying error and failing to install correctly around 42%
Having trouble downloading things from creative cloud. I'm not sure how to fix this. I would like to have a walk through of some kind. It is doing this with Photoshop too.
Refer to error EX 11 and the blurb described there:
Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium -
Error while compiling BerkeleyDB: Command failed for target `util_sig.lo'
Hi,
While trying to compile BerkeleyDB on Solaris 10 x86 ( is there an easier way to get BerkeleyDB running than compiling from source? ) I was confronted with the error message appended.
I used Berkeley 4.4.20 and configured by executing
PATH=/usr/ccs/bin:${PATH} # for ar
cd build_unix
CC=gcc ../dist/configure
Here the error message:
UNIX /app/berkeleydb/db/4.4.20/build_unix
$ make
/usr/bin/sh ./libtool --mode=compile gcc -c -I. -I../dist/.. -D_REENTRANT -O2 ../common/util_sig.c
gcc -c -I. -I../dist/.. -D_REENTRANT -O2 ../common/util_sig.c -fPIC -DPIC -o .libs/util_sig.o
In file included from /usr/include/sys/signal.h:34,
from /usr/include/signal.h:26,
from ../common/util_sig.c:15:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/signal.h:26,
from ../common/util_sig.c:15:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from ../common/util_sig.c:15:
/usr/include/signal.h:111: error: parse error before "siginfo_t"
/usr/include/signal.h:113: error: parse error before "siginfo_t"
*** Error code 1
make: Fatal error: Command failed for target `util_sig.lo'
Thanks, Dietrich
PS:
I need the LDAP server for playing with a JAAS LDAP login module and something minimal would be enough. Is there something easier to install than OpenLDAP?I fail to understand why you're taking all this trouble. Both the Berkeley DB as OpenLDAP are both shipped with Solaris 10/x86 natively. Look into the so called companion cd / dvd. That makes setting all of this up a piece of cake.
Another option could be looking into Blastwave or Sun Freeware. -
(App-store) Compilation failed while executing : compile-abc
I just upgraded to AIR16 and can no longer compile for the ios app store from Windows 7.
Calling "adt -package -target ipa-test ..." with AIR16 works correctly, installs and runs on my device.
Calling "adt -package -target ipa-app-store ..." with AIR16 crashes the compiler with this generic error:
Compilation failed while executing : compile-abc
Calling "adt -package -target ipa-app-store ..." with AIR14 (and the new compiler, not legacy) works correctly.
How do I get more information about what is happening? I have no ANEs. Could this have something to do with the new 64-bit requirements? My version of Java? With provisioning profiles? What else is different between test and app-store compile modes?Update: I tried a half dozen different ways to compile with AIR16 to no joy. Test works fine, App Store compile fails.
Then finally tried the current AIR17 beta which DOES work. I don't see anything in the release notes about fixing ios app-store compile issues, though there's a new known ios-related bug with textfields.
Does ADT produce an error log file somewhere? I'd like to get more info about this "Compilation failed while executing : compile-abc" error if I ever run into it again. -
Compilation failed while executing : compile-abc
This is with the latest AIR 4.0 beta, dated 12/17, with "-useLegacyAOT no" on Mac, OS X 10.9.
0 compile-abc 0x0095d728 PrintStackTrace(void*) + 40
1 compile-abc 0x0095dba1 SignalHandler(int) + 449
2 libsystem_platform.dylib 0x9039fdeb _sigtramp + 43
3 libsystem_platform.dylib 0xffffffff _sigtramp + 1875247679
4 compile-abc 0x0005846b halfmoon::Cleaner::simplify(halfmoon::BlockEndInstr*) + 667
5 compile-abc 0x00058fc6 halfmoon::cleanBlocks(halfmoon::Context*, halfmoon::InstrGraph*, halfmoon::Cleaner*) + 166
6 compile-abc 0x0005ab34 halfmoon::removeDeadCode(halfmoon::Context*, halfmoon::InstrGraph*) + 324
7 compile-abc 0x0004ee1c halfmoon::AbcBuilder::visitBlocks(nanojit::Seq<halfmoon::AbcBlock*>*) + 316
8 compile-abc 0x000c0a76 halfmoon::parseAbc(avmplus::MethodInfo*, halfmoon::Lattice*, halfmoon::InfoManager*, nanojit::Allocator&, halfmoon::AbcGraph*, avmplus::Toplevel*, avmplus::AbcEnv*, halfmoon::ProfiledInformation*, halfmoon::Context&) + 182
9 compile-abc 0x000c1788 halfmoon::JitWriter::writeEpilogue(avmplus::FrameState const*) + 216
10 compile-abc 0x00129d3b avmplus::NullWriter::writeEpilogue(avmplus::FrameState const*) + 27
11 compile-abc 0x00183829 avmplus::Verifier::verify(avmplus::CodeWriter*) + 1273
12 compile-abc 0x000053af compile_abc::CompilerCore::emitPoolToModule(compile_abc::PoolInfo&, compile_abc::LLVMModule*) + 927
13 compile-abc 0x00004a80 compile_abc::CompilerCore::compile() + 4496
14 compile-abc 0x0000363f compile_abc::CompilerCore::run(int, char**) + 1471
15 compile-abc 0x00005f62 main + 66
16 compile-abc 0x00002235 start + 53
There's also a lengthy list of program arguments, looks like it's working on ABCs from native extensions. Buried in there is this line as well:
41063 Bus error: 10Hey, I have found this:
Swf compiled with Flash Pro CS6 with AIR 3.9 SDK selected
No error
ipa is created a working without any problems.
Swf compiled with Flash Develop and Flex 4.6 AIR 3.9 SDK
adt throws this error:
Compilation failed while executing : compile-abc
Swf compiled with Flash Develop and Adobe AIR 4.0 SDK
adt throws this error:
duplicate symbol _traits:com.distriqt.extension.facebookutils.base::ExtensionBas
e$ in:
AOTBuildOutput-0000000000_7.o
com.distriqt.FacebookUtils-0_3.o
duplicate symbol _traits:com.distriqt.extension.facebookutils.base::ExtensionBas
e in:
AOTBuildOutput-0000000000_7.o
com.distriqt.FacebookUtils-0_3.o
duplicate symbol _traits:com.distriqt.extension.facebookutils::FacebookUtils$ in
AOTBuildOutput-0000000000_7.o
com.distriqt.FacebookUtils-1_4.o
duplicate symbol _traits:com.distriqt.extension.facebookutils::FacebookUtils in:
AOTBuildOutput-0000000000_7.o
com.distriqt.FacebookUtils-1_4.o
duplicate symbol _traits:com.distriqt.extension.facebookutils.events::FacebookUt
ilsLoginEvent$ in:
AOTBuildOutput-0000000000_7.o
com.distriqt.FacebookUtils-2_5.o
duplicate symbol _traits:com.distriqt.extension.facebookutils.events::FacebookUt
ilsLoginEvent in:
AOTBuildOutput-0000000000_7.o
com.distriqt.FacebookUtils-2_5.o
duplicate symbol _traits:com.distriqt.extension.testflightsdk.base::ExtensionBas
e$ in:
AOTBuildOutput-0000000000_7.o
com.distriqt.TestFlightSDK-0_0.o
duplicate symbol _traits:com.distriqt.extension.testflightsdk.base::ExtensionBas
e in:
AOTBuildOutput-0000000000_7.o
com.distriqt.TestFlightSDK-0_0.o
duplicate symbol _traits:com.distriqt.extension.testflightsdk::TestFlightSDK$ in
AOTBuildOutput-0000000000_7.o
com.distriqt.TestFlightSDK-1_1.o
duplicate symbol _traits:com.distriqt.extension.testflightsdk::TestFlightSDK in:
AOTBuildOutput-0000000000_7.o
com.distriqt.TestFlightSDK-1_1.o
ld: 10 duplicate symbols for architecture armv7
Compilation failed while executing : ld64 -
[SOLVED] Firefox won't start - "Failed to execute default Web Browser"
I've just updgraded from Firefox 3 to version 4 (by running "pacman -Syu") on my 64-bit Arch installation. I started XFCE and Firefox 4 worked fine for a few minutes before crashing and closing automatically.
A short while later (long enough to forget exactly what I was doing when it crashed!) I tried to run it again, but got the error message Failed to execute default Web Browser. / Input/output error.
I've tried rebooting the PC and re-installing firefox & firefox-i18n, but still get the same error. If I run "firefox" from a terminal window, I get the following response:
OpenOffice path before fixup is '/usr/lib/openoffice.org3'
OpenOffice path is '/usr/lib/openoffice.org3'
*** NSPlugin Wrapper *** WARNING:(/build/src/nspluginwrapper-1.3.0/src/npw-wrapper.c:3160):invoke_NP_Initialize: assertion failed: (rpc_method_invoke_possible(g_rpc_connection))
NOTE: child process received `Goodbye', closing down
OpenOffice path before fixup is '/usr/lib/openoffice.org3'
OpenOffice path is '/usr/lib/openoffice.org3'
firefox: symbol lookup error: /usr/lib/mozilla/plugins/libvlcplugin.so: undefined symbol: NPP_Initialize
I'm not sure why there are so many references to "OpenOffice"...
Can anyone offer any suggestions as to how to get Firefox working again? (Thanks in advance!)
Last edited by esuhl (2011-03-25 00:40:19)^-Ubermensch-^ wrote:https://bugs.launchpad.net/ubuntu/+sour … bug/722690
Thanks for that. After I posted my last message, Firefox crashed again on a website containing embedded video. I disabled the add-on, but when VLC was updated, I guess it installed and enabled the add-on again. Firefox worked fine initially, but I've just tried to open it again and the same "input/output error" message appeared. I rebooted, but the problem persisted.
Uninstalling the vlc-plugin package seems to have resolved that, though. -
Error- deploymnt fails - ORABPEL-00016 & 05215- Javac compiler config err
Hi,
We are getting the below error randomly when we try to deploy..
ORABPEL-00016
Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXX_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "XXXXX" (revision "1.0"): Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXXl_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
and a huge stack trace...
Everything in the server.xml seems to be in the path... its getting fixed after a recycle.... we are able to deploy the same BPEL once recycled...
Does any one of you encounter same problem.. Whts the reason why this is occuring?
Thanks,
JayaprakashHi Jp,
The error message : Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
This means that you javac compiler might not be installed or not in the classpath entry. You might want to compile the bpel project using the JDev and then deploy.
Cheers
A -
Error- deployments fails-ORABPEL-00016 & 05215-Javac compiler config err
Hi,
We are getting the below error randomly when we try to deploy..
ORABPEL-00016
Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXX_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
ORABPEL-05215
Error while loading process.
The process domain encountered the following errors while loading the process "XXXXXX" (revision "1.0"): Javac compiler configuration error.
Failed to execute javac compiler on file(s) "/opt/oracle/soa/bpel/domains/default/tmp/.bpel_XXXXXXl_1.0_3c2c050b949f081557b49d81a3e5fe35.tmp/BPEL-INF/src/bpel/XXXXXl/BPEL_BIN.java". Exception reported is:
Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
and a huge stack trace...
Everything in the server.xml seems to be in the path... its getting fixed after a recycle.... we are able to deploy the same BPEL once recycled...
Does any one of you encounter same problem.. Whts the reason why this is occuring?
Thanks,
JayaprakashHi Jp,
The error message : Please verify that javac compiler is installed on this machine and is included in the classpath (check that "tools.jar" in particular is in the classpath).
This means that you javac compiler might not be installed or not in the classpath entry. You might want to compile the bpel project using the JDev and then deploy.
Cheers
A -
MDM Database command execution error. A SQL statement failed to execute
Hi,
When we tried to execute an MDM Java query modify/create, we get the following dump.
Is this anything to do with the parameters that we pass or is it something to do with the database ?
We have checked the code and we do not find anything wrong with the code at all.
We are using Java API 5.5.63.73 and calling MDM API's using WebDynpro for Java.
I have noticed this issue has been raised here as well :
Database command execution error. (While mounting a repository)
com.sap.mdm.commands.CommandException:
com.sap.mdm.internal.protocol.manual.ServerException: Database command execution error. A SQL
statement failed to execute. The actual error may have been written to a log file. at
com.sap.mdm.data.commands.ModifyRecordCommand.execute(ModifyRecordCommand.java:163) at
Regards,
Subramanian V.
Edited by: Subramanian Venkateswaran on Dec 10, 2008 8:11 PMHi Subramanian ,
The error looks more like a problem with the data base or MDM system rather than the java code.
Which is the underlying database you are using with MDM? As some users have faced some difficulties when working with the DB2 Data base,If this is the data base you too are working upon then may be the issue could be similar,if possible try using the Oracle or SQL data base as these databse show more compatibility than a DB2 when working with MDM .
Also check the MDM users autorization and authentication to modifyor create recordrs in MDM.try given the user the ADMIN rights,and tehn try and see if teh user is able to modify/Create the mdm records.
Lastly you can check the database instance and listener configuration correctly.try restarting the Database service form the system if possible.
Hope It Helped
Thanks & Regards
Simona Pinto -
FRM-99999 FAILED TO EXECUTE COMMAND IEXPLORE
Hi there,
When I attempt to call the report from my forms (from the browser using IE4), an error message was returned:
FRM-99999: Failed to execute command.
Command=iexplore http://<webserver>:89/sdq.pdf
FULL Details: CreateProcess:iexplore http://<webserver>:89/sdq.pdf error=0
Few users experienced this problem when using IE4, some do not have this problem.
For users using Netscape 4.7 and above, so far have not encountered this problem.
I am using
Developer 6.0 Patch 7
OAS 4.0.8.1
Please help. Thanks.My remark regarding "PeymentMethodCode" was but a rant, heartfelt though it be. I mean those gits have left bloody spelling errors in their XML-Schemas -- talk about professionalism, talk about seriousness, talk about something you actually have to PAY for.
Note also that BOTH spellings are used: the correct one (with an "a"), below the "BPPaymentMethods" element, and the wrong one below the "BusinessPartners" element.
I don't know why you get that error. As told, the errorcode in the response seems to indicate that the "Object isn't supported".
If you tried with the default sample provided in the doc, that would be quite unlikely.
Dunno, really. Maybe you're lacking permissions? -
[Solved] "slim: failed to execute login command" after awesomewm updat
Hi,
i updated some weeks ago via pacman -Syu, where also awesome wm was updated from 3.4.* to 3.5.* so I updated my rc.lua as it is told on their wiki, but i cant login with my rc.lua anymore i got the failed to execute login command error from slime. If i use the shipped efault rc.lua it works fine, can someone help me to figure out whats wrong with my rc.lua?
-- Standard awesome library
local gears = require("gears")
local awful = require("awful")
awful.rules = require("awful.rules")
require("awful.autofocus")
-- Widget and layout library
local wibox = require("wibox")
-- Theme handling library
local beautiful = require("beautiful")
-- Notification library
local naughty = require("naughty")
local menubar = require("menubar")
local vicious = require("vicious")
function fullscreens(c)
awful.client.floating.toggle(c)
if awful.client.floating.get(c) then
local clientX = screen[1].workarea.x
local clientY = screen[1].workarea.y
local clientWidth = 0
-- look at http://www.rpm.org/api/4.4.2.2/llimits_8h-source.html
local clientHeight = 2147483640
for s = 1, screen.count() do
clientHeight = math.min(clientHeight, screen[s].workarea.height)
clientWidth = clientWidth + screen[s].workarea.width
end
local t = c:geometry({x = clientX, y = clientY, width = clientWidth, height = clientHeight})
else
--apply the rules to this client so he can return to the right tag if there is a rule for that.
awful.rules.apply(c)
end
-- focus our client
client.focus = c
end
-- {{{ Error handling
-- Check if awesome encountered an error during startup and fell back to
-- another config (This code will only ever execute for the fallback config)
if awesome.startup_errors then
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, there were errors during startup!",
text = awesome.startup_errors })
end
-- Handle runtime errors after startup
do
local in_error = false
awesome.connect_signal("debug::error", function (err)
-- Make sure we don't go into an endless error loop
if in_error then return end
in_error = true
naughty.notify({ preset = naughty.config.presets.critical,
title = "Oops, an error happened!",
text = err })
in_error = false
end)
end
-- {{{ Variable definitions
-- Themes define colours, icons, and wallpapers
-- beautiful.init("/home/kili/Repositories/awesome-themes/arch/theme.lua")
beautiful.init("/usr/share/awesome/themes/default/theme.lua")
-- This is used later as the default terminal and editor to run.
terminal = "urxvt"
editor = os.getenv("EDITOR") or "nano"
editor_cmd = terminal .. " -e " .. editor
-- Default modkey.
-- Usually, Mod4 is the key with a logo between Control and Alt.
-- If you do not like this or do not have such a key,
-- I suggest you to remap Mod4 to another key using xmodmap or other tools.
-- However, you can use another modifier like Mod1, but it may interact with others.
modkey = "Mod4"
-- Table of layouts to cover with awful.layout.inc, order matters.
layouts =
awful.layout.suit.tile,
awful.layout.suit.tile.left,
awful.layout.suit.tile.bottom,
awful.layout.suit.tile.top,
awful.layout.suit.floating,
awful.layout.suit.fair,
awful.layout.suit.fair.horizontal,
awful.layout.suit.spiral,
awful.layout.suit.spiral.dwindle,
awful.layout.suit.max,
awful.layout.suit.max.fullscreen,
awful.layout.suit.magnifier
-- {{{ Tags
-- Define a tag table which hold all screen tags.
tags = {}
for s = 1, screen.count() do
-- Each screen has its own tag table.
tags[s] = awful.tag({ 1, 2, 3, 4, 5}, s, layouts[1])
end
-- {{{ Menu
-- Create a laucher widget and a main menu
myawesomemenu = {
{ "manual", terminal .. " -e man awesome" },
{ "edit config", editor_cmd .. " " .. awesome.conffile },
{ "restart", awesome.restart },
{ "quit", awesome.quit }
mymainmenu = awful.menu({ items = { { "awesome", myawesomemenu, beautiful.awesome_icon },
{ "open terminal", terminal }
mylauncher = awful.widget.launcher({ image = beautiful.awesome_icon, menu = mymainmenu })
-- {{{ Wibox
-- Create a textclock widget
batwidget = wibox.widget.textbox()
vicious.register(batwidget, vicious.widgets.bat,
function(widget,args)
local formatstring = " Bat: "..args[1]..args[2] .."%".. " "..args[3] .. " "
if args[2] <= 25 and args[1] == "-" then
return "<span color=\"red\">".. formatstring .. "</span>"
end
return formatstring
end, 60, "BAT0")
netwidgetETH = wibox.widget.textbox()
netwidgetWIFI = wibox.widget.textbox()
vicious.register(netwidgetETH, vicious.widgets.net, ' eth0:<span color="#CC9393">${eth0 down_kb}</span> <span color="#7F9F7F">${eth0 up_kb}</span>', 3)
vicious.register(netwidgetWIFI, vicious.widgets.net,' wlan0:<span color="#CC9393">${wlan0 down_kb}</span> <span color="#7F9F7F">${wlan0 up_kb}</span>', 3)
menubar.utils.terminal = terminal
mytextclock = awful.widget.textclock()--{ align = "right" })
-- Create a systray
mysystray = wibox.widget.systray()
-- Create a wibox for each screen and add it
mywibox = {}
mypromptbox = {}
mylayoutbox = {}
mytaglist = {}
mytaglist.buttons = awful.util.table.join(
awful.button({ }, 1, awful.tag.viewonly),
awful.button({ modkey }, 1, awful.client.movetotag),
awful.button({ }, 3, awful.tag.viewtoggle),
awful.button({ modkey }, 3, awful.client.toggletag),
awful.button({ }, 4, function(t) awful.tag.viewnext(aweful.tag.getscreen(t)) end),
awful.button({ }, 5, function(t) awful.tag.viewprev(aweful.tag.getscreen(t)) end)
mytasklist = {}
mytasklist.buttons = awful.util.table.join(
awful.button({ }, 1, function (c)
if c == client.focus then
c.minimized = true
else
c.minimized = false
if not c:isvisible() then
awful.tag.viewonly(c:tags()[1])
end
-- This will also un-minimize
-- the client, if needed
client.focus = c
c:raise()
end
end),
awful.button({ }, 3, function ()
if instance then
instance:hide()
instance = nil
else
instance = awful.menu.clients({ width=250 })
end
end),
awful.button({ }, 4, function ()
awful.client.focus.byidx(1)
if client.focus then client.focus:raise() end
end),
awful.button({ }, 5, function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end))
for s = 1, screen.count() do
-- Create a promptbox for each screen
mypromptbox[s] = awful.widget.prompt()--{ layout = awful.widget.layout.horizontal.leftright })
-- Create an imagebox widget which will contains an icon indicating which layout we're using.
-- We need one layoutbox per screen.
mylayoutbox[s] = awful.widget.layoutbox(s)
mylayoutbox[s]:buttons(awful.util.table.join(
awful.button({ }, 1, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 3, function () awful.layout.inc(layouts, -1) end),
awful.button({ }, 4, function () awful.layout.inc(layouts, 1) end),
awful.button({ }, 5, function () awful.layout.inc(layouts, -1) end)))
-- Create a taglist widget
mytaglist[s] = awful.widget.taglist(s, awful.widget.taglist.filter.all, mytaglist.buttons)
-- Create a tasklist widget
mytasklist[s] = awful.widget.tasklist(s, awful.widget.tasklist.filter.currenttags, mytasklist.buttons)
-- Create the wibox
mywibox[s] = awful.wibox({ position = "top", screen = s })
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(mylauncher)
left_layout:add(mytaglist[s])
left_layout:add(mypromptbox[s])
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
if s == 1 then right_layout:add(wibox.widget.systray()) end
right_layout:add(netwidgetWIFI)
right_layout:add(netwidgetETH)
right_layout:add(batwidget)
right_layout:add(mytextclock)
right_layout:add(mylayoutbox[s])
-- Now bring it all together (with the tasklist in the middle)
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_middle(mytasklist[s])
layout:set_right(right_layout)
mywibox[s]:set_widget(layout)
-- Add widgets to the wibox - order matters
--mywibox[s].widgets = {
-- mylauncher,
-- mytaglist[s],
-- mypromptbox[s],
--layout = awful.widget.layout.horizontal.leftright
-- mylayoutbox[s],
-- mytextclock,
-- batwidget,
-- netwidgetETH,
-- netwidgetWIFI,
-- s == 1 and mysystray or nil,
-- mytasklist[s],
-- layout = awful.widget.layout.horizontal.rightleft
end
-- {{{ Mouse bindings
root.buttons(awful.util.table.join(
awful.button({ }, 3, function () mymainmenu:toggle() end),
awful.button({ }, 4, awful.tag.viewnext),
awful.button({ }, 5, awful.tag.viewprev)
-- {{{ Key bindings
globalkeys = awful.util.table.join(
awful.key({ modkey, }, "Left", awful.tag.viewprev ),
awful.key({ modkey, }, "Right", awful.tag.viewnext ),
awful.key({ modkey, }, "Escape", awful.tag.history.restore),
awful.key({ modkey, }, "j",
function ()
awful.client.focus.byidx( 1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "k",
function ()
awful.client.focus.byidx(-1)
if client.focus then client.focus:raise() end
end),
awful.key({ modkey, }, "w", function () mymainmenu:show() end),
-- Layout manipulation
awful.key({ modkey, "Shift" }, "j", function () awful.client.swap.byidx( 1) end),
awful.key({ modkey, "Shift" }, "k", function () awful.client.swap.byidx( -1) end),
awful.key({ modkey, "Control" }, "j", function () awful.screen.focus_relative( 1) end),
awful.key({ modkey, "Control" }, "k", function () awful.screen.focus_relative(-1) end),
awful.key({ modkey, }, "u", awful.client.urgent.jumpto),
awful.key({ modkey, }, "Tab",
function ()
awful.client.focus.history.previous()
if client.focus then
client.focus:raise()
end
end),
-- Standard program
awful.key({ modkey, }, "Return", function () awful.util.spawn(terminal) end),
awful.key({ modkey, "Control" }, "r", awesome.restart),
awful.key({ modkey, "Shift" }, "q", awesome.quit),
awful.key({ modkey, }, "l", function () awful.tag.incmwfact( 0.05) end),
awful.key({ modkey, }, "h", function () awful.tag.incmwfact(-0.05) end),
awful.key({ modkey, "Shift" }, "h", function () awful.tag.incnmaster( 1) end),
awful.key({ modkey, "Shift" }, "l", function () awful.tag.incnmaster(-1) end),
awful.key({ modkey, "Control" }, "h", function () awful.tag.incncol( 1) end),
awful.key({ modkey, "Control" }, "l", function () awful.tag.incncol(-1) end),
awful.key({ modkey, }, "space", function () awful.layout.inc(layouts, 1) end),
awful.key({ modkey, "Shift" }, "space", function () awful.layout.inc(layouts, -1) end),
awful.key({ modkey, "Control" }, "n", awful.client.restore),
-- Prompt
awful.key({ modkey }, "r", function () mypromptbox[mouse.screen]:run() end),
awful.key({ modkey }, "x",
function ()
awful.prompt.run({ prompt = "Run Lua code: " },
mypromptbox[mouse.screen].widget,
awful.util.eval, nil,
awful.util.getdir("cache") .. "/history_eval")
end),
-- Multimedia
awful.key({ }, "XF86AudioLowerVolume", function () awful.util.spawn("amixer -q sset Master 2dB-") end),
awful.key({ }, "XF86AudioRaiseVolume", function () awful.util.spawn("amixer -q sset Master 2dB+") end),
awful.key({ }, "XF86AudioNext",function () awful.util.spawn( "mocp -f" ) end),
awful.key({ }, "XF86AudioPrev",function () awful.util.spawn( "mocp -r" ) end),
awful.key({ }, "XF86AudioPlay",function () awful.util.spawn( "mocp -G" ) end),
awful.key({ }, "Print", function () awful.util.spawn("ksnapshot") end),
awful.key({ }, "", function () awful.util.spawn("slimlock") end)
clientkeys = awful.util.table.join(
awful.key({ modkey, }, "f", function (c) c.fullscreen = not c.fullscreen end),
awful.key({ modkey, "Shift" }, "c", function (c) c:kill() end),
awful.key({ modkey, "Control" }, "space", awful.client.floating.toggle ),
awful.key({ modkey, "Control" }, "Return", function (c) c:swap(awful.client.getmaster()) end),
awful.key({ modkey, }, "o", awful.client.movetoscreen ),
-- awful.key({ modkey, "Shift" }, "r", function (c) c:redraw() end),
awful.key({ modkey, }, "t", function (c) c.ontop = not c.ontop end),
awful.key({ modkey, }, "n",
function (c)
-- The client currently has the input focus, so it cannot be
-- minimized, since minimized clients can't have the focus.
c.minimized = true
end),
awful.key({ modkey, }, "m",
function (c)
c.maximized_horizontal = not c.maximized_horizontal
c.maximized_vertical = not c.maximized_vertical
end),
awful.key({ modkey, "Shift" }, "f", fullscreens)
-- Compute the maximum number of digit we need, limited to 9
keynumber = 0
for s = 1, screen.count() do
keynumber = math.min(9, math.max(#tags[s], keynumber))
end
-- Bind all key numbers to tags.
-- Be careful: we use keycodes to make it works on any keyboard layout.
-- This should map on the top row of your keyboard, usually 1 to 9.
for i = 1, keynumber do
globalkeys = awful.util.table.join(globalkeys,
awful.key({ modkey }, "#" .. i + 9,
function ()
local screen = mouse.screen
if tags[screen][i] then
awful.tag.viewonly(tags[screen][i])
end
end),
awful.key({ modkey, "Control" }, "#" .. i + 9,
function ()
local screen = mouse.screen
if tags[screen][i] then
awful.tag.viewtoggle(tags[screen][i])
end
end),
awful.key({ modkey, "Shift" }, "#" .. i + 9,
function ()
if client.focus and tags[client.focus.screen][i] then
awful.client.movetotag(tags[client.focus.screen][i])
end
end),
awful.key({ modkey, "Control", "Shift" }, "#" .. i + 9,
function ()
if client.focus and tags[client.focus.screen][i] then
awful.client.toggletag(tags[client.focus.screen][i])
end
end))
end
clientbuttons = awful.util.table.join(
awful.button({ }, 1, function (c) client.focus = c; c:raise() end),
awful.button({ modkey }, 1, awful.mouse.client.move),
awful.button({ modkey }, 3, awful.mouse.client.resize))
-- Set keys
root.keys(globalkeys)
-- Set Firefox to always map on tags number 2 of screen 1.
-- { rule = { class = "Firefox" },
-- properties = { tag = tags[1][2] } },
-- {{{ Rules
if screen.count() > 1 then
awful.rules.rules = {
-- All clients will match this rule.
{ rule = { },
properties = { border_width = beautiful.border_width,
-- border_color = beautiful.border_normal,
focus = true,
keys = clientkeys,
buttons = clientbuttons } },
{ rule = { class = "MPlayer" },
properties = { floating = true } },
{ rule = { class = "gimp" },
properties = { floating = true } },
{ rule = { class = "Xdialog" },
properties = { floating = true } },
{ rule = { class = "Firefox" },
properties = { tag = tags[1][1] } },
{ rule = { name = "Thunderbird" },
properties = { tag = tags[1][2] } },
{ rule = { instance = "plugin-container" },
properties = { floating = true } },
{ rule = { class = "Luakit" },
properties = { floating = true } }
else
awful.rules.rules = {
-- All clients will match this rule.
{ rule = { },
properties = { border_width = beautiful.border_width,
-- border_color = beautiful.border_normal,
focus = true,
keys = clientkeys,
buttons = clientbuttons } },
{ rule = { class = "MPlayer" },
properties = { floating = true } },
{ rule = { class = "gimp" },
properties = { floating = true } },
{ rule = { class = "Firefox" },
properties = { tag = tags[1][2] } },
{ rule = { name = "Thunderbird" },
properties = { tag = tags[1][3] } },
{ rule = { instance = "plugin-container" },
properties = { floating = true, fullscreen = true } },
{ rule = { class = "Dolphin" },
properties = { floating = false, fullscreen = false, tag = tags[1][4] } },
{ rule = { class = "Luakit" },
properties = { floating = true } },
{ rule = { class = "Pidgin" },
properties = { tag = tags[1][5] } }
end
-- {{{ Signals
-- Signal function to execute when a new client appears.
client.connect_signal("manage", function (c, startup)
-- Add a titlebar
-- awful.titlebar.add(c, { modkey = modkey })
-- Enable sloppy focus
c:connect_signal("mouse::enter", function(c)
if awful.layout.get(c.screen) ~= awful.layout.suit.magnifier
and awful.client.focus.filter(c) then
client.focus = c
end
end)
if not startup then
-- Set the windows at the slave,
-- i.e. put it at the end of others instead of setting it master.
-- awful.client.setslave(c)
-- Put windows in a smart way, only if they does not set an initial position.
if not c.size_hints.user_position and not c.size_hints.program_position then
awful.placement.no_overlap(c)
awful.placement.no_offscreen(c)
end
end
local titlebars_enabled = false
if titlebars_enabled and (c.type == "normal" or c.type == "dialog") then
-- Widgets that are aligned to the left
local left_layout = wibox.layout.fixed.horizontal()
left_layout:add(awful.titlebar.widget.iconwidget(c))
-- Widgets that are aligned to the right
local right_layout = wibox.layout.fixed.horizontal()
right_layout:add(awful.titlebar.widget.floatingbutton(c))
right_layout:add(awful.titlebar.widget.maximizedbutton(c))
right_layout:add(awful.titlebar.widget.stickybutton(c))
right_layout:add(awful.titlebar.widget.ontopbutton(c))
right_layout:add(awful.titlebar.widget.closebutton(c))
-- The title goes in the middle
local title = awful.titlebar.widget.titlewidget(c)
title:buttons(awful.util.table.join(
awful.button({ }, 1, function()
client.focus = c
c:raise()
awful.mouse.client.move(c)
end),
awful.button({ }, 3, function()
client.focus = c
c:raise()
awful.mouse.client.resize(c)
end)
-- Now bring it all together
local layout = wibox.layout.align.horizontal()
layout:set_left(left_layout)
layout:set_right(right_layout)
layout:set_middle(title)
awful.titlebar(c):set_widget(layout)
end
end)
client.connect_signal("focus", function(c) c.border_color = beautiful.border_focus end)
client.connect_signal("unfocus", function(c) c.border_color = beautiful.border_normal end)
Here is also my slime config and my initrc
ls -lisa .xinitrc
3276814 4 -rwxr-xr-x ...
#!/bin/sh
xrdb -merge ~/.Xresources
wicd-client --tray &
exec awesome #>> ~/.cache/awesome/stdout 2>> ~/.cache/awesome/stderr
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions awesome,xfce4,icewm-session,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user kili
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
focus_password yes
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme archlinux-simplyblack
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
Thanks in advance!
Edit:
Besides a lot of other errors the problem was the systray. It was created 2 times, now login works again. I figured that out via enabling logging for awesome in the xinitrc again.
Last edited by stubb (2013-01-08 23:20:05)Hi,
I have the same kind of issue after updated slim from v1.3.4-4 to v1.3.5-1.
see my topic here :
https://bbs.archlinux.org/viewtopic.php?id=156792
Last edited by cedricl (2013-01-24 17:16:42) -
We have the SharePoint Server 2010 with SP1 environment on which the custom SP2010 designer pages were working as expected before the
August 13, 2013 CU has installed. But, getting the below exception while trying to add the new item after the CU has installed.
Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object. at Microsoft.SharePoint.WebControls.SPDataSourceView.ExecuteInsert(IDictionary values) at
System.Web.UI.DataSourceView.Insert(IDictionary values, DataSourceViewOperationCallback callback) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65 w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected Microsoft.SharePoint.WebPartPages.DataFormWebPartException: The data source control
failed to execute the insert command. 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc at Microsoft.SharePoint.WebPartPages.DataFormWebPart.InsertCallback(Int32 affectedRecords, Exception ex) at System.Web.UI.DataSourceView.Insert(IDictionary
values, DataSourceViewOperationCallback callback) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.FlatCommit() at Microsoft.SharePoint.WebPartPages.DataFormWebPart.HandleOnSave(Object sender, EventArgs e)
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean
inclu... 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
06/19/2014 16:49:37.65* w3wp.exe (0x1240) 0x1300 SharePoint Foundation
Runtime tkau Unexpected ...deStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 3b64c3a0-48f3-4d4a-af54-d0a2fc4553cc
I have tried changing the "DataSourceMode" as below, now the insert command is working, but update command is not working.
<SharePoint:SPDataSource runat="server" DataSourceMode="ListItem" />
Also, the lookup dropdown fields are displaying the value as "<a href="Daughterhttp://cpsp10/sites/Employees/_layouts/listform.aspx?PageType=4&ListId={8F62F444-FB6A-4F03-9522-C4696B45DCD1}&ID=10&RootFolder=*">Daughter</a>"
instead of only "Daughter".
Please provide the solution to get rid of this issue.
Thanks
RamasubbuTry below:
http://social.technet.microsoft.com/Forums/en-US/ae910269-3a0c-4506-844b-e8bc89d95b71/data-source-control-failed-to-execute-the-insert-command
http://blog.jussipalo.com/2012/01/sharepoint-2010-data-source-control.html
While there can be many causes for this generic error message, in my case the first parameter or ddwrt:DataBind function inside the SharePoint:FormFields element was
'i' and I was working with an Edit Form. Changing it to
'u' as it was with every other FormField fixed the issue.
<SharePoint:FormField runat="server" id="ff1{$Pos}" ControlMode="Edit" FieldName="Esittaja" __designer:bind="{ddwrt:DataBind('u',concat('ff1',$Pos),'Value','ValueChanged','ID',ddwrt:EscapeDelims(string(@ID)),'@Esittaja')}"
/>
Explanation:
DataBind operation type parameters (the first parameter) are listed below:
'i' stands for INSERT,
'u' stands for UPDATE,
'd' stands for DELETE.
http://webcache.googleusercontent.com/search?q=cache:d9HHY4I7omgJ:thearkfloats.blogspot.com/2014/03/sharepoint-2010-data-source-control.html+&cd=4&hl=en&ct=clnk&gl=in
If this helped you resolve your issue, please mark it Answered -
My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.
Maybe you are looking for
-
Hi, I have an desktop application and the following are the functionalities of the same. 1. User inputs the data file with path (log file) to parse the required data. 2. Once the user enters the path and starts the tool with start button, the tool pa
-
Printing Problem at LOCAL Printer
Hello guru's, Through workflow after approval and release of Purchase order, it should print at a LOCAL printer. but it is not happening. Will anyone suggest me the reasons behind that. Full points for useful solution
-
How to make more space avilable on strt-up disk?
I've just started burning DVDs on iDVD, using movies I have produced in iMovie and then transferred, via the Media Browser. But when I come to burn the finished product I am severely limited. The 'help" article informs me "be sure you have at least t
-
Ok, i'm new at action script so i have a problem I have a sound inside a movie clip (sound_MC) in the main timeline, and i have another movie clip with a button inside, and I need that button to control that sound movie clip on (release) { gotoAndSto
-
I have a work phone, how do i reset it
I just started a new job and was given a old I phone 5c, the old employee is no longer around and I need to get into I cloud and get all his face book contacts off the phone, how do I reset the phone if that is what I have to do