Set External Field Value by Workflow
Is there any way to Set External Field Value by SPD 2013 workflow?
Hi j.kiani,
According to your description, my understanding is that you want to update an external column in a list by SharePoint workflow.
I did a test:
Create a list with an external column
Create a workflow , and add ‘Set Field in Current Item’ action, select the field is the external column, set the value to a value from the External Content type data source
Publish the workflow and start it on an item
The external column was changed to the value that I set in workflow. However, when I refreshed the external column by clicking the ‘sync’ flag, the data was changed to the old value.
I used ‘Update ListItem’ action, the result was same
It seems that there is not an OOB way to change external column with SharePoint workflow. You can change the external column by SharePoint web OOB way (Editing item) .
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Similar Messages
-
How to set field value in workflow SPD2013?
Hi All,
how to set field value in workflow SPD2013? Actually using Infopath, i need to update a field value through workflow.(Little differnt from SPD2010). How to do this?As Amit says, some elaboration here would be good. You can use InfoPath as a form for either a list or a library and then set it to trigger a workflow upon item creation. The workflow will consist a number of actions, one of which is the Update
Field Item.
More information on the available steps can be seen here.
http://msdn.microsoft.com/en-us/library/office/jj164026.aspx
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem. -
When I try to access iTunes or safari, I get the following message:The procedure entry point QTCF_CFHTTP message set header field value could not be located in the dynamic link library QTCF.dll I uninstalled and reinstalled.same result HELP!
Taken at face value, you're having trouble with a QuickTime program file there.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "QuickTime" and then click "Repair".
Does the repair go through okay? If so, are you able to launch iTunes and/or Safari now? -
Set Geolocation field value in SPD workflow
Hi,
How can I set the new geolocation field in a SP2013 list from a SPD list workflow? I've tried 'Set Location to Point([%Variable: X%] [%Variable: Y%])' hoping that a string would work but this fails.
Thanks in advanceHi,
I'm using a SPD 2013 list workflow. The field to be set is the new Geolocation field in 2013 (see http://msdn.microsoft.com/en-us/library/jj164050.aspx ). My reference
to the variable X and Y was an attempt to construct a string to populate the Geolocation field using the 'raw value' method B described in the web page. I would not be able to test with 2010 as it does not have the Geolocation field.
The workflow gets suspended with the following error message;
RequestorId: 91adda23-7a37-d55f-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 400 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["39"],"SPRequestGuid":["91adda23-7a37-d55f-b0ce-7a87af2020c9"],"request-id":["91adda23-7a37-d55f-b0ce-7a87af2020c9"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4454"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Mon, 08 Apr 2013 04:16:46 GMT"],"P3P":["CP=\"ALL IND DSP COR ADM CONo CUR CUSo IVAo IVDo PSA PSD TAI TELo OUR SAMo CNT COM INT NAV ONL PHY PRE PUR UNI\""],"Server":["Microsoft-IIS\/7.5"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) in d:\bt\103818\private\source\WF\Microsoft.Activities.Hosting\Microsoft\Activities\Hosting\Runtime\Subroutine.cs:line 282 at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation) -
Setting default field values for multi-line text fields in lists?
For the multiple lines of text field in a list, I'm using SharePoint Designer 2013 to set a default
value for the field, but I need that default value to include rich text formatting (the default value includes a formatted table). Is this possible without having to delve into JavaScript? And if so, how?Yes, we can :)
You can do it with powershell
$web = get-spweb <yourweb>
$list = $web.lists["<yourList>"]
$field = $list.fields["<yourField>"]
$field.DefaultValue = "place your html code here"
$field.update()
hope that helps -
How to get-set Hidden field value from JSP ?
Hii,
I am quite newbie about jsp and looking for some help..
I have several url links on my jsp page.
I when I click one of them, I want to reload my page with new request parameter(s) but also keep the older one(s) in hidden field(s)...
but I dont know how to set and get hidden field value "syntax" and I am not sure about where/when should I do this... at first I though that I can do it in "onClick" property of url..
Thanks..Hy,
I have a problem just like that. I am trying to send the value of an subdomain is to another page to be able to modify an entry.
So in listsubdomains.jsp I have
<input type = "hidden" name = "subdomainid" value="<%=subdomains.SubdomainID%>"><%=subdomains[i].SubdomainID%>.
This shouls send the id of the subdomain.
I an sending this to modifysubdomain.jsp with <form name = "listsubdomains" method = "post" action = "modifysubdomain.jsp">
and there I retrieve the value like this:
Integer id = new Integer (request.getParameter("subdomainid"));
out.println(request.getParameter("subdomainid"));
My problem is that no matter what is the value I chose to modify it always sends the first value. If I another value manually it works, but just then.
Please give me some ideas. -
How to set hidden field value in form?
I've encountered a problem while developing a forum using JSF. See this code:
<h:form id="commmentForm" formName="commentForm" >
<h:input_hidden id="pageId" valueRef="CommentBean.pageId" value="${article.id}"/>
<h:input_text id="userName" valueRef="CommentBean.userName"/>
<h:input_text id="userEmail" valueRef="CommentBean.userEmail"/>
<h:input_text id="userURL" valueRef="CommentBean.userURL"/>
<h:input_textarea id="content" valueRef="CommentBean.content"/>
<h:command_button id="submit" label="Leave A Comment" commandName="submit" actionRef="CommentBean.createAction" />
</h:form>
I was trying to specify a hidden field that represents the unique ID number of the current article using <h:input_hidden> tag above. But RI complains that runtime expression is not permitted in 'value' attribute. So I set the attribute 'value' to arbitrary number such as '2', but it seems that CommentBean.pageId is still null.
So the question is:
1. Why can't I use EL in JSF tags attributes?
2. How can I resolve my problem mentioned above?
Thanks very much in advance!To solve the problem, you have to use two hiddenfields, say:
<h:input_hidden id="pageId"valueRef="CommentBean.pageId" />
<h:input_hidden id="articleId" valueRef="article.id"/>
I want to set the value of CommentBean.pageId to
${article.id} (article is not a managed bean) and to
let CommentBean.createAction insert a database row
whose page_id column is ${article.id}, so I think the
tags you suggested won't work for me.Why can't you interrogate your ComponentBean for its pageId property during your invoke() method? By the time your invoke() method is called, the value from the hidden field will have been pushed to the model, so this should be no problem. You could do Application.getValueBinding("ComponentBean.pageId").getValue() to do so.
Ed -
Dynamically set report field value
In my old classic VB project, I was able to set a report field value using the following simple line of code.
someReport.SomeField.SetText u201Cabcu201D
This was nice and simple, now with crystal reports .Net I do the following:
((TextObject)someReport.SectionX.ReportObjects["SomeField"]).Text = u201Cabcu201D;
Itu2019s simple enough but seems too elaborated compared to the good old VB6.
Not that is a big deal but is there a simpler way (Classic VB6 style) to set a field on a report without me having to create my own utility method to u201Csimplifyu201D things?
Thanks.Perhaps using a formula?
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Public Class Form1
Inherits System.Windows.Forms.Form
Dim Report As New CrystalReport1()
Dim FormulaFields As FormulaFieldDefinitions
Dim FormulaField As FormulaFieldDefinition
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
FormulaFields = Report.DataDefinition.FormulaFields
FormulaField = FormulaFields.Item(0)
FormulaField.Text = "[formula text]"
CrystalReportViewer1.ReportSource = Report
End Sub
Other than that, InProc RAS, but if the solution you have is complicated, you ain't seen nothing yet
- Ludek -
Set the field value, call transcation T-CODE in CRM
Hello
I face the proble as follow: select the field into the itab,and set the field itab-field to call transcation T-CODE in CRM.
exp:call T-CODE:"CRMD_BUS2000111". when I execute the program, display the opportunity value screen, not the init select&result screen.
Thanks!Please reward and close your other post regarding a similar problem.
If you don't want the initial screen, you have fill the BDC data for the initial screen and then call the transaction with mode 'E'. I gave the same solution to your previous question. -
Set Column Default Value with Workflow
How to set Column Default Values using a workflow.
<input alt="Mark as abusive!" id="ctl00_m_g_e11f6e6d_9b4b_42d7_97fb_486623821166_ctl12_ctl03_abuseButton_710" name="ctl00$m$g_e11f6e6d_9b4b_42d7_97fb_486623821166$ctl12$ctl03$abuseButton_710" src="http://www.sharepointforum.nl/_layouts/images/TOZIT/SharePointForums/abuse/abuse.png"
style="border-width:0px;" title="Mark as abusive!" type="image" />
15 seconds ago
After I add an item including metadata in a List, a Workflow starts to create a Library Folder with rootfolder, subfolder and sub-subfolder names based on the List first three column values.
I like that the unique created library subfolder automatically receives several additional List column values in its Column Default Value with that workflow.
After done, documents added to this subfolder are automatically populated with Metadata from the parent Subfolder.
Workflow standard function can be used to populate the folder Column Value to this but not the Column Default Value.
Does someone has a solution how to set Column
Default Value using a workflow?
I like to use such workflow in Sharepoint 2010.
Thank in advance.Hi,
I think it cannot be achieved by workflow. -
Setting a field in the workflow when a form is a document variable?
Hello,
I hope I can explain this right. I have a form with several digital signatures, so I am passing the forms around using document variables. This is also outside of form manager, I email the form out to users who fill it out and email it back in. I use the Email Attachments and Email Receiver QPACs for this so that it can touch back on the work flow. So, after user1 fills out the form and then emails it back in, I need to set a field in the form before I email the form back out to the next person. So, since my form is within a document variable, what is the best way to go about doing this so that I can continue perserving the digital signatures? The field I am setting keeps track of which part the form is currently on so that I can mark subforms as readonly.
Thanks,
JenniferHello,
I hope I can explain this right. I have a form with several digital signatures, so I am passing the forms around using document variables. This is also outside of form manager, I email the form out to users who fill it out and email it back in. I use the Email Attachments and Email Receiver QPACs for this so that it can touch back on the work flow. So, after user1 fills out the form and then emails it back in, I need to set a field in the form before I email the form back out to the next person. So, since my form is within a document variable, what is the best way to go about doing this so that I can continue perserving the digital signatures? The field I am setting keeps track of which part the form is currently on so that I can mark subforms as readonly.
Thanks,
Jennifer -
Run workflow when a new item is added and set a fields value
we require a workflow which should run when a new item is added to the form library(infopath) and should update the value of a field "title" with the filename(eg:111.xml).
Please let us know, how we can accomplish it.
Thanks,
Zedprog
My blog: http://sharepointr.com - ZedProg ProfileHello,
You need to use "Update List Item" action to update any item in list/library. Refer this link for sample:
http://3sharp.com/blog/updating-list-items-with-sharepoint-designer/
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help -
How to set default field values in customer master data.
hi,
I want to set default values in customer master data (account group wise).
but
I don't know how to set it .
please help me.
(I don't want to change field status in account group rather than I want to set default values for field. )
thank you.hi,
this is to inform you that,
in SAP there is no such a provision.
but
in LSMW there is an option of CONSTANT VALUES.
check in SHD0 - also
please check and confirm
balajis\a -
I'm trying to set a rule based condition to a text field and having issues.
First,Initial,Last
If Initial is empty, Full Name = First Last
Condition: Initial Is Blank
Rule Type: Action
Run These Actions: Show the Value of Field or Formula
fx: concat(First, " ",Last)
Nothing shows up in Full Name (the rule is applied to this field) if I have a letter in Inital or not.
InfoPath 2013Hi
you need to set your rules out differently
i.e.
if First is not empty then set full name to be First + Last
if Initial is not empty then set full name to be Initial + Last
Regards
Sergio Giusti Sergio Blogs
Linked
In Profile
Whenever you see a reply you think is helpful, click Vote As Helpful.
Whenever you see a reply you think is the answer to the question, click Mark As Answer. -
Clear customize Date field value in workflow using IDOC Script
hi all
I have a customize field type is Date with default value is Current date time. At one step of workflow I want to clear the default value of this field with
<$wfUpdateMetaData("xmPublicDate", "")$>
But it not effect. The current date time still here
Do you have any idea about it?
Thanks!hi all
I have a customize field type is Date with default value is Current date time. At one step of workflow I want to clear the default value of this field with
<$wfUpdateMetaData("xmPublicDate", "")$>
But it not effect. The current date time still here
Do you have any idea about it?
Thanks!
Maybe you are looking for
-
How do I get out of the guest log in page when I try to reboot?
Was trying to burn a disc when got error message to try to redo it again
-
Any standard function module to read data from a cube
Hi, I want to read data from a cube say XYZ, into an internal table. Is there any standard function module to do this? If so can anyone plz tell me what change should i make in the function module for my requirement. Regards BW Fresher.
-
I just bought iPhone 5c. Looking for LifeProof case. Will Nuud protect screen from scratches and shatter? Or should I go with Fre? Thank you for suggestions.
-
During the most recent update of itunes i have encountered and error during each attempt to install the software. Also since attempting to do the install and failing the install my ipod will not connect or sync with my itunes. If anyone has had this
-
We're using the content engines to cache web & ftp traffic. If we have multiple DNS servers listed, does the content engine use them from top-down (if not found from 1st, go to next), or in rotation (like round-robin)?? We have multiple domains that