Set Sim Default for call?

I use SBH 52 to make a call but the SOny T2 Ultra show pop up sim selector and i can't make a call by SBH52. Now, I want to set SIM 2 to make call and sms but in the setting menu don't have option to do this.
How can i make Sim 2 for call default?

LOL. "Dear Friends,Thank you for contacting the Customer Support Center Sony Xperia.For Xperia line of ultra dual T2 does not currently support 1 sim to install using the default to calling and texting. The only machine settings option allows the sim to use internet access.We would like to acknowledge and send your feedback to the relevant departments to further support if other customers wish to use one sim settings default to calling and texting on Xperia ultra dual T2-like you.Please note that if we do not get an email reply within 5 days of your request will be automatically closed. And all subsequent relevant information will not reach us, and you need to send a new requestSincerely,
Duong Hoang ThachCustomer Support Center Sony Xperia"

Similar Messages

How can I set a default for webpages to expand to full screen?

How can I set a default for webpages to expand to full screen? Every webpage I go to does not expand to a full screen which causes me to have to ctrl+++ each time. How can I set my preference to expand to full screen automatically?
Thanks.

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Setting a default for the Table Headings

Hi all,
the users are asking me if it's possible to set in the Table View of Answer the Display Column & Table Headings = As Table.Column as default. This option can be found in the Table View Properties and you can set the value just for the current request...
Is there a way to set a default value for this option for all the requests?
Thanks in advance.
Nazza

it's stupid, but it works in 9 & 10. probably v8 also, but I can't remember that far back. and it might not work in future releases.
add this to the top of your script:
set termout off echo off feed off pages 0 timing off verify off
rem Determine if parameter 1 is defined. If not, default to "XXX"
spool temp1.sql
select 'select decode(instr(''-' from dual;
def 1
select ''',''symbol 1 is UNDEFINED''||chr(10)),0,''rem fine'',''define 1 = XXX'') from dual;' from dual;
spool off
spool temp2.sql
@temp1
spool off
@temp2
set termout on
put your code here
and of course, it leaves two files (temp1 and temp2) in the current directory. so, you can add o/s dependent delete statements via a host command. or just leave them. you're call.
Message was edited by:
shoblock
forgot the "set" commands at the top
AND...
set termout back on at the end (along with echo or whatever else you want).
and I changed from defaulting &1 to a value of "1", to a value of "XXX". should make it easier to follow (I hope).
and finally, thanks to Ron who helped me figure this one out (many years ago)

How can I make Skype Desktop the default for Call: links in MS Outlook?

How can I persuade MS Outlook to use Skype Desktop for Call: links (such as those for phone numbers in a Contact Card)? Right now it is using Skype for Business to open them (I have both Skype Desktop and Skype for Business - formerly Lync - installed) and I need to use Skype Desktop by default instead. Office 365 Business (15.0.4727.1003) on Windows 8.1 Pro x64, with Skype Desktop v 7.6.whatever the latest is. Advice very welcome!

How can I persuade MS Outlook to use Skype Desktop for Call: links (such as those for phone numbers in a Contact Card)? Right now it is using Skype for Business to open them (I have both Skype Desktop and Skype for Business - formerly Lync - installed) and I need to use Skype Desktop by default instead. Office 365 Business (15.0.4727.1003) on Windows 8.1 Pro x64, with Skype Desktop v 7.6.whatever the latest is. Advice very welcome!

How set printer defaults for a printer

My motivation is to have my wife's new MacBook always print double-sided. Currently she needs to select the preset that we've made for printing duplex, but that's easy to forget to do.
OS is 10.4.7
Is there a way to set the printer defaults in this OS?
I want to have duplex just be the default, even after reboot, and if she wants to print single-sided then she'd need to select the other preset.
BTW: If it makes a difference -- We're using a Xerox 8550DP, for which the duplex selection is in the standard place of Print -> Layout -> Two-sided -> Long-edged binding
(Some other printers require using the duplex selection in their own printer's section under that Copies & Pages dropdown menu but not this one.)
Maybe I'm just not a very good searcher. I searched many here, MacFixit, MacWorld magazine, generally on the web. Looked in my David Pogues's Tiger book and Andy Ihnatko's Tiger book. I came up with nothing about setting printer defaults at all.
I bet I can tweek it in a pref file. I hope I don't have to resort to a hack to do something this standard.
Any help or pointers would be greatly appreciated!
PB G4, MacMini (Tiger Server), MacBook Pro Mac OS X (10.4.5)

I think you can do this. Set up a two-sided setting,
and save it. Print with it. Then find the preference
file com.apple.print.custompresets.plist, choose Get
Info, and lock it.
If you want to save another setting, you will have to
unlock it.
Hey this is only a workaround but it is a pretty darned good workaround, especially because it's not too invasive (only locking a pref file at the user level) and what's stored in that custompresets.plist file is com.apple.print.lastPresetPref, which is probably the key to your suggestion. I think I understand it, anyway.
I followed that procedure, created a Custom Preset with duplex turned on which I named "Standard Duplex", then locked the file you suggest that's in my user's home Library. It survived app switching and a reboot. It seems to work great, and I can still use the Standard setting as well if I want to. I even chose the custom setting and although it's locked the temp changes I made were enacted (I chose to print this page, scaled to fit a #10 envelope) and that worked too. The Standard or other presets can still be chosen when you want to use those, and the app remembers the last setting through the rest of the session, it's just that upon opening an app the default is now my custom "Standard Duplex". This does what I want.
I think this is a great workaround. I'm going to go load it onto my wife's MacBook. I suppose I should mark this solved even though there's no real, y'know, user-manual way to do this. Maybe something I'll just hope is a feature in Leopard.
Thank you Bruce and all the other helpful folks who pondered on this one! Heh, I'm sure 1/2 of the tree population thanks you too.
PB G4, Mac Mini G4, MacBook Pro, MacBook Mac OS X (10.4.7)

Is there any way to set the default for *.doc document so that Pages opens them automatically?

I have a number of Ms Word documents because I used to have Word for Mac before the last OS release. Now, of course, when I double-click on them, I get a message saying that PowerPC isn't supported.
Now Pages will open these files. Is there any way to change the default for *.doc files so that a double-click will open them in Pages?
(Instead of me going to the trouble of finding out where they are actually located on the hard drive so that I can open pages and say - here, open this file--even though you didn't create it--)

Click on a .doc file and type Cmnd I to open Get Info. In the Open with: menu select Pages, then click on Change All…
Walt

How to do you set the default for a radio radio button

I am having a problem setting a value in my code.
I would like to default a value for the radio button.
I think I need to use some java/javascript using the cattributes option but I
am not sure what I should be saying.
The example is provided below.
>>>>>>>>>>>>>
htp.tableRowOpen;
htp.formRadio('in_prior_no','1',chkd);
htp.p('1');
htp.formRadio('in_prior_no','2',chkd);
htp.p('2');
htp.formRadio('in_prior_no','3',chkd);
htp.p('3');
htp.formRadio('in_prior_no','4',chkd);
htp.p('4');
htp.formRadio('in_prior_no','5',chkd);
htp.p('5');
htp.tabledata(); htp.br;htp.br;
htp.tableclose;
<<<<<<<<<<<<<

As far as I know, iMovie version 10 is only accurate to .1 seconds or 3 frames.
I think you could only get down to 5 frames in version 9, though you could display frames s you mention.
Matt

How set up defaults for Rich Media parms?

My PDFs typically contain a large number of video clips - sometimes as many as 100, with the same particular cluster of parameters needed for every one (floating window, stay open forever till closed by user, no poster, etc.). The current interface forces me to enter these parameters again and again in a set of different dialogs for every single one of these clips one at a time. Then when I inevitably realize later that I need to edit the document, Acrobat's primitive Text Touch-up capabilities force me to return to the source Word document, make the changes there, rebuild the PDF, and go through the same lengthy and tedious process of embedding the video clips and setting their parameters all over again.
I have requested the ability to have a set of parameters stored as a default as long as about seven years ago, but without success. Back then, someone recommended to me a third party company that might be able to do this for me, but at the time, I was reluctant to spend the money. No longer. I'm now ready to pay the piper. Does anyone know of such a company that might rescue me from this Sisyphusean toil? Or some other solution that I'm simply not aware of?
Thanks in advance for your help!
Peyton

Thanks, but as far as I can see, Replace Pages won't do the job either. Either I must go back to the source document in Microsoft Word and make the changes, perform the page replacement, then re-insert the media clips, or excerpt the appropriate pages to a separate PDF and make the changes with the Text Touch-up tool, which does not enable the text to flow to a second page. And in neither one of these means does the text flow to the next page with all other pages flowing as desired - to say nothing of the fact the many of my decisions as to when to make a new page depend on my own judgement in the source document as to margins, when to add a carriage return to prevent splitting of material that should stay together, and so on.
So on your advice I have just submitted a post on this topic to the Acrobat SDK forum.
Thanks again,
Peyton Todd

How to set RAW defaults for Contrast and Brightness?

When I open a RAW fole in PS Elements 8 the Brightness set to 50 and the contrast set to 25.
How to set these two values to 0 (zero) as a defaults when a RAW file opened for the first time (defaults).
Thank you for the help.
Leo

I think you can set presets in camera RAW (I'm at work now so I can't tell you the exact method), but setting contrast and brightness to zero gives you an ugly image, and you will most likely move the contrast up and the brightness up, so I'm not sure you are really gaining anything by having a default of 0 contrast and 0 brightness.
The defaults chosen by Adobe are reasonable.

Is it possible to set a default for "Time Span"?

AME seems to default to the Time Span to "Work Area" when rendering AE compositions. Is there any method, either in the app or by preference file hackery, to change this default to "Entire Composition?"
Coming from rendering in AE, this is a major problem for my workflow. You can't save this setting with a preset, like you can in AE, so I have to manually set this on every single comp I render. When I inevitably forget (about half the time or more), I end up with partial renders or having to cancel renders and start them over. Not fun.
I have submitted this as a feature request.

I miss appointments b/c of this too.
And no, Apple does not read these forums UNLESS you comment on how pathetic and Mickey Mouse certain elements of their software is - like no 'default' setting for alarms in iCal, and not being able to resize windows from all edges (vs. the little annoying corner) etc etc.
I hope they fix it with the new software package in Leopard. I'm somewhat afraid it's going to be 'Leper' at first though. We'll see...

GR/GI slip print option to be set as default for movement type 311

HI,
I am required to do transfer posting by using tcode MIGO . In this the slip(GR/GI) print indicator is currently not checked . I need to check it every time to get the print .
PLease tell me how can i set this option to be always set as checked as default setting . I need to do this movement type 311 specific.
Waiting for your reply
Thanks
Rohit Chavan

Hi
If you are looking at having the print checkbox selected automatically when you goto MIGO, set the parameter ID NDR in your user master record as X.
Regards
Prasad

"Created By" field to set up defaults for vlookups/dropdowns

Hello,
I am working on my firm's sharepoint 2013 site and have a custom list that I am trying to make easy for users to use. One of the things I am trying to do is to set default values for some of the dropdown/vlookup columns based on the user who is creating
the new entry.
So let's say I create a list in the site that will contain these two columns:
User Business Unit
A Accounting
B Manufacturing
The user column will match my big list's created by names that are automatically generated. In the big list I will have a Business Unit column that will be matching the values from above. The users should be able to select for which Business Unit they are
doing the work for but majority of the time they will have a default one.
My goal is to have user A, when creating a new entry to have Business Unit automatically set to Accounting, but also for that user to be able to change it to Manufacturing if needed. This should only apply for creating the item.
Any ideas how this can happen if at all? I searched all over for this, but can't find an example of how exactly to do it. As a side note, I cannot install any add-ons since I don't have permissions but can write script web parts if that is needed.
Thank you in advance

Hi,
Per my understanding, you might want to set default value for the “Business Unit” column by looking up to another list.
You can apply
JavaScript with Client Object Model to the NewForm.aspx page to meet your requirement.
A possible solution can be like this: When user opens the NewForm.aspx page of the current list, the custom JavaScript will be executed to get information about the
current user, then query the other list for the default value, set the value to the drop down list of the “Business Unit” column dynamically. The JavaScript can be added into a Content Editor Web Part and insert into the NewForm.aspx page.
The links below would be helpful for implementing this scenario:
About how to
select an option of drop down list using JavaScript:
http://www.imranulhoque.com/javascript/javascript-beginners-select-a-dropdown-option-by-value/
About
how to use JavaScript Client Object model to access SharePoint list:
How to: Create, Update, and Delete List Items Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185011(v=office.14).aspx
Common Programming Tasks in the JavaScript Object Model
http://msdn.microsoft.com/en-us/library/office/hh185015(v=office.14).aspx
Here are two links about how to
add code into SharePoint page via Content Editor Web Part:
http://blogs.msdn.com/b/sharepointdev/archive/2011/04/14/using-the-javascript-object-model-in-a-content-editor-web-part.aspx
http://sharepointadam.com/2010/08/31/insert-javascript-into-a-content-editor-web-part-cewp/
Best regards
Patrick Liang
TechNet Community Support

Attach a custom content type and set as default for picture library using client object model

Hi,
How to associate custom content type to a picture libraray and set it as default using the client object model?
Thanks

Hello,
Here you go:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/b1de0697-0006-4f89-8909-1b94aa18ad89/how-to-reorder-content-types-in-list-with-client-context
http://www.niteenbadgujar.com/2013/05/change-default-content-type.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

How do I set a default for folders to be read & write

I have an IMAC with OSX v10.6. I am on a network with a few other computers. My disk is used to house shared folders. When I create a new folder or file from Word it is set to "read only" and I have to go into the file info and set it to "read & write". This may be a simple fix but I would like to know how to change my preferences to fix this issue.
THANKS!

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

When I try to set a default for viewing all folders using the view options, it fails to apply this view to all folders. What am I doing wrong?

I open the 'view options', select the mode of viewing I want, click the 'always open in' and push the use as defaults button... this, by all accounts, should work to apply this mode of viewing to ALL my folders and subfolders... yet it does not.

I've had to work on this a little before it "stuck" to my preference; it appears that if you open a folder within a folder and set the option, it will apply to that and any within that, but not up a level. So you need to make sure you have it set at the top folder level and you have it set like this:
Also, if you have a folder in the dock, you will need to either control click it or - in my case I want column view - you need to Command click the folder and it'll open in column view. I've not liked this "feature" since it was changed in Snow Leopard; previously, you could just click on the folder and it would open the way you had it set.

Set Sim Default for call?

Similar Messages

Maybe you are looking for