Set up LAMP server, but not viewable from outside.

I set up a LAMP server, followed the guide http://wiki.archlinux.org/index.php/LAMP there. I can view it from localhost or the IP address or the web address http://plaufcan.homeunix.org. But it is not viewable outside of my local network. What else do I have to do?

If your router is showing an external IP address of 192.x.x.x, I am guessing that you are on a DSL line, and that you more than likely used the windows setup software to configure your internet connection.
Basically, when you run the software, many of the modems go into a very dumb router configuration. Your router is picking up a natted ip address from the modem, and using that to update dyndns.
# nslookup plaufcan.homeunix.org
Non-authoritative answer:
Name: plaufcan.homeunix.org
Address: 192.168.2.101
I'll bet you dollars to donuts that you can open your browser and go to http://192.168.2.1 (or alternatively http://192.168.2.254) and you'll get access to the modem. You'll have to find the page that allows it to be set to a bridge. After that, you'll have to set the router up to do any authentication that your ISP requires.
One of the large ISP's in Canada use modems like this for their DSL, and it causes no end of problem when SOHO users add another router. NATted NAT connections do not always play nice.

Similar Messages

Remote Server Admin not working from outside of network for 1 server

Our company recently changed ISPs and I had to change our two 10.4 server's IP addresses. We have a mail server (intel xserve) and a file/web server (quicksilver g4). Both servers have two network cards in them. The problem is two-fold:
1- I can successfully manage the Xserve machine locally on our network and from my home. However, I can only manage the Quicksilver g4 server locally. Any kind of external access is not even acknowledged.
2- I'm not sure if I missed any steps when changing IP addresses for these server-based computers. Also, I'm not sure if I correctly set our dns names to the correct IP address.
For some background, this is the exact IP update process I used for each server:
Quicksilver G4 (file/web server) - Installed network card #2 and configured it with the new Public IP in the "System Preferences/Network" panel. In Server Admin I set our website to use the new public IP address. (network card #2 has no firewall device in between it and the internet.)
Then, I configured the default network card #1 to a static, yet private IP address that's behind our DLink firewall device with the rest of our network.
Intel Xserve (e-mail server) - Network card #1 was the only one setup before our network change. It had a static, public IP address. When we changed ISPs, I configured network card #2 to the new static, public IP address supplied to us by the new ISP in the "System Preferences/Network" panel. This new IP address is where all email traffic currently gets pointed to. (All mail is successfully sent and delivered.) Until our former ISP gets shutdown, I still have network card #1 configured to the older static public IP address. After the old ISP is shut off, I plan on changing network card #1 to a static, private address.
Any assistance would be greatly appreciated.
Mac OS X (10.4.8)

What should I check in AD? I am by no means an expert with AD.
Yes, I am using the same client OS.
I am talking about RDP over the internet, like from home to the office. We have a static IP assigned to the router from ISP. A static internal IP assigned to the server on the LAN. And the router port forwards 3389 to the assigned IP.
It was working fine before we reinstalled Server 2012. These are the steps I took when reinstalling:
1. format drive and install OS
2. rename the server
3. install SQL server
4. Install TFS and SharePoint
5. Add Active Directory role and promote to Domain Controller
6. Add domain users
7. Enable remote access on the server and add users to remote access list

Verizon mail deleted from server is not deleted from IPAD2 but works fine on Android

I have both an Android phone and an IPAD. This Android (RAZR) and my previous one (Droid2) worked fine. Mail deleted from the server is also deleted from the phone. Deleted from phone would delete from server. Worked great. On IPAD, when setting up the Verizon mail account, it defaults to POP and I can set it to delete from server when removed from IPAD. However, mail deleted from the server is not deleted from the IPAD and so I have to remove it manually (a second time). Why does it work on Android and not on IPAD? Settings on Android appear to also be for POP. Can anyone help with this? It's too hard to believe that with so many people using IPADs, that this is such a problem. I've read that Verizon isn't supporting IMAP, but how in the world is the Android phone working?
MrBigHands

Any mail service POP downloads a copy of the message to the phone. It would then need to be deleted from the device itself. What you are referring to where its deleted in both places is an IMAP type email service.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I set up my iCloud account on iPad with an exchange account and aol account. I can see exchange and aol emails but not those from .me account or apple email. I got it to show all 3 accounts on my iPhone with no problem. Hat am I missing?

I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions?

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

What can I do when web pages with scripting display ok from a server but not locally?

I have html and java script in the same folder path, both on a server and locally. The pages display correctly when accessed from the server, but not when accessed locally. Is there a change I can make to Firefox to solve this problem?

An address starting with c: wouldn't be any kind of domain name. C: is the drive lettering system DOS and and later uses. By default, A: and B: are reserved for your first and second floppy disk drive. All hard drives are then named C: through Z:, if you have that many. C: is normally your startup disk.
Anyway, their PDF file is incorrectly linked to a file directly on the C: drive of someone's computer. It's not going to work no matter what you do.

Same command works on the server but not on the workstation

Scenario
Exchange 2010 sp3
Name Value
CLRVersion 2.0.50727.4984
BuildVersion 6.1.7600.16385
PSVersion 2.0
WSManStackVersion 2.0
PSCompatibleVersions {1.0, 2.0}
SerializationVersion 1.1.0.1
PSRemotingProtocolVersion 2.1
Worstation:
Name Value
PSVersion 4.0
WSManStackVersion 3.0
SerializationVersion 1.1.0.1
CLRVersion 4.0.30319.18063
BuildVersion 6.3.9600.16406
PSCompatibleVersions {1.0, 2.0, 3.0, 4.0}
PSRemotingProtocolVersion 2.2
I input a command from my workstation using ISE
get-exchangeserver | Where-Object {$_.IshubtransportServer -eq $True} | Get-MessageTrackingLog -Start (get-date).AddHours(-2) -Sender '[email protected]'
Error:
The input object cannot be bound to any parameters for the command either because the command does not take pipeline input or the input and its properties do not match any of the
parameters that take pipeline input.
The Exact same command from the Server works.
In my profile I have the following:
set-Location c:\
$Session = New-PSSession -ConfigurationName Microsoft.Exchange -ConnectionUri 'http://MyExchangeServer/powershell'
import-pssession $Session
Import-Module ActiveDirectory
$host.PrivateData.ErrorForegroundColor = 'green'
Clear-Host
From My Workstation:
PS C:\> Get-PSSession
Id Name ComputerName State ConfigurationName Availability
1 Session1 MyExchangeServer Opened Microsoft.Exchange Available
Why does the command work on the server but not on the workstation?
Alexis

Hi Tiri2014,
There are some differences between Remote PowerShell and Exchange Management Shell. You cannot use the pipeline when you run some cmdlets by using Remote PowerShell.
Here’s a link to similar case for your reference:
Error message when you try to pipe the result of a cmdlet into another cmdlet by using Remote Powershell in Office 365 dedicated: “The input object cannot be bound to any parameters
for the command”
http://support.microsoft.com/kb/2701827/en-us
Hope it helps
Best regards

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all?? Looks like I can set it for one but not others. All, one, or nothing

Hey Eric,
Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
Again, thanks for trying, it is appreciated.

Task fails on server but not on my development PC

hi
I have this annoying error on my server but not in my PC,
When I run the task from VisualStudio2010 it works perfectly. Then I deploy the package to my SqlServer2012 "Intgegration Services Catalogs" and run the deployed package from the SqlManagementConsole I got the error.
The source is an oracle DB and the query wich calculate the field "MONJTO_HRSEXTR" do it with this "sum(nvl(h.monto,0)) monto_hrsext" on the select statement.
I guess the problem is SSIS thinks that the column MONTO_HRSEXTR is "Unicode string[DT_WSTR]" with "lenght=38" and when the conversion process try to cast to Decimal(12,2) it fails. There are 2 big questions here
1.Why it works on my development PC and not in the server when deployed?
2.why the "Data Conversion Transtormation Editor" thinks the field is a Unicode string[DT_WSTR] if that field is a sum result from numerics fields in the oracle table
Thanks a lot!!! for any Idea
Salu2 Sergio T

Hello
Thanks for your time, I made a modification
to the package to redirect all rows
that cause error
All errors are rows with decimal values
such as "11.3" "33.44"
All values are using "," instead of
"." and that's the problem
what is strange is that the same source,
in both cases the same database
It will be something related to the
configuration of the oracle client on the Windows
server? The Oracle is in another server, a unix server.
I do not know much about oracle.
I know we use TSNnames for connecting, but I really don't know what to see, any idea??
thanks again for your time Jan
Salu2 Sergio T

Setting for J2EE server do not exist

Hi,
I have prepared a web service from a FM.
I can't test it from the WSADMIN since this system is not integrated to a J2EE server. So I get the error message "Setting for J2EE server do not exist"
I am able to generate the WSDL file from Tcode WSADMIN
How can I test this web service from a browser with a J2EE server? If browser not possible then how can I test this web service.
Thank you,
Sam

Hi Sam,
I am not sure if you can test the web services without a J2EE server. For
testing in wsadmin, you do not need the system to be integrated with a J2EE server. Only the details of any J2EE server in the landscape can be given in
wsadmin -> Goto -> Administration Settings .
Regards
Srikishan

In v.11, how can I capture video but not audio from a camera?

In v.11, how can I capture video but not audio from a camera?

Rodney
I see what you mean....Premiere Elements 10 appears to be the last version that had options for the user to select Capture Video and/or Audio in the its Capture Window.
If you are doing DV data capture firewire into the Premiere Elements 11 Capture Windows and want a final file without audio and you cannot do this at the camera level, then consider....
1. Do the Capture "to the Timeline" - video linked to audio result on the project's Video Track 1
a. Right click the Timeline DV AVl and select Delete Audio and then edit accordingly.
or
b. Import the DV AVI but, when you go to export it, in the export settings, remove the check mark next to Audio so that the export contains only the video portion.
Publish+Share/Computer/AVI with Presets = DV NTSC Standard
Please let us know if any of that worked for you.
Thank you.
ATR

I just bought a wacom and brings photoshop elements 8, but not download from thecd let me know if I

I just bought a wacom and brings photoshop elements 8, but not download from thecd let me know if I can download the software PSE 8 directly from the Internet. I have the serial number.

When i bought a wacom tablet several years ago the version of photoshop
elements that came with it was on the cd (dvd), is it not that way now?
Or are you having problems installing elements from the included cd (dvd)?
MTSTUNER

Help, CCX7 not triggered from outside, codec problem.

Good Day..
Here we have a scenario that is, a customer upgraded from CUCM4.2 and IPCC4 to CUCM7.0 and CCX7.0, in the old deployment, he used codec G.729 on IPCC and for sure for the voice prompts, and it used to work fine, now, after the upgrade, and using the same script, prompts and choosing G.729 to run on CCX, we are only able to listen to prompts and go into the AA menu options internally, but when calling from outside, nothing, it keeps ringing.
I changed the codec back to G.711 from CCX’s service parameter, and called from outside, the CCX opens the script yes, but not playing any prompts…
Although the gateway used to work with IPCC normally, I had configured codec G.729 and ran it under a special dial-peer dedicated for CCX trigger DN, still nothing changed..
Any guides please.
AT

Does not matter if you are using MGCP or H323 the same rule applies for xcoding needs. The bigger question is what has changed as part of the upgrade as there should be no changes from operations point of view.
I would suggest checking if there are media resources such as Xcoder that for some reason did not register after the upgrade. Also, is the site with the GW experiencing the issues remote from the UCCX server? If you want to use G729 for calls into the GW simple change the region assigned to the GW's DP to use G729 between itself and the UCCX cti ports.
HTH,
Chris

FEP clients update defintitions from SCCM server, but not timely

Our FEP clients are configured to download definition updates from WSUS. They seem to be doing this, but not as frequently as they should; the policy is set to check for updates every 7 hours, but they do not usually download updates until definitions
are a week or more out of date.
This seems to be true even if we try to force an update by clicking the
Update button on the FEP client. For example, my client right now shows "Definitions created on" 2/13/2012, but "Definitions last checked:" shows a 2/15/2012 timestamp (I clicked the button a few minutes ago).
While the definitions on my workstation are two days out of date, other computers on the network have today's definitions, so it looks like the definitions on the SCCM server are up to date.
What's going on here?

hi
im also having the same issues please find the WindowsUpdate.log and give me a fix
========== Logging initialized (build: 7.6.7600.256, tz: +0530) ===========
2014-01-27 14:39:10:134
724 14d4
Misc = Process: \??\C:\WINDOWS\system32\winlogon.exe
2014-01-27 14:39:10:134
724 14d4
Misc = Module: C:\WINDOWS\system32\wuaueng.dll
2014-01-27 14:39:10:134
724 14d4
Shutdwn FATAL: WUAutoUpdateAtShutdown failed, hr=8024A000
2014-01-27 14:39:18:230
1216 748
AU ########### AU: Uninitializing Automatic Updates ###########
2014-01-27 14:39:18:230
1216 748
DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-01-27 14:39:18:230
1216 748
DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-01-27 14:39:18:230
1216 748
DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-01-27 14:39:18:230
1216 748
DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-01-27 14:39:18:230
1216 748
DnldMgr FATAL: DM:CBitsJob::SetCallbackHandler: SetNotifyInterface failed with 0x80080008.
2014-01-27 14:39:39:968
220 df8
Misc =========== Logging initialized (build: 7.6.7600.256, tz: +0530) ===========
2014-01-27 14:39:40:000
220 df8
Misc = Process: C:\WINDOWS\System32\svchost.exe
2014-01-27 14:39:40:031
220 df8
Misc = Module: C:\WINDOWS\system32\wuaueng.dll

Mp_statusreceiver directory over 50GB - MP has been removed from this server, but not completely?

I had a server run out of disk space today. Digging in, the ccm mp_statusreceiver directory had 650,000 files in it, over 50GB in size. From what I understand, I think that folder is queuing up messages to go from a management point to the primary
server, but the server in question had it's management point removed a couple of weeks ago. It seems like it's still gathering data to send, but not sending it to the primary server, and filling up the drive.
If that's the case, then it seems the management point didn't actually get removed from the server, even though it's no longer listed in the config manager console as a management point. (The server still has a DP on it.)
How can I clean up whatever remnants of the MP are installed on this server?

Hi,
Yes, you need a path for mp.msi. I saw that is located at C:\Program Files\Microsoft Configuration Manager\bin\X64.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Set up LAMP server, but not viewable from outside.

Similar Messages

Maybe you are looking for