Help, CCX7 not triggered from outside, codec problem.

Good Day..
Here we have a scenario that is, a customer upgraded from CUCM4.2 and IPCC4 to CUCM7.0 and CCX7.0, in the old deployment, he used codec G.729 on IPCC and for sure for the voice prompts, and it used to work fine, now, after the upgrade, and using the same script, prompts and choosing G.729 to run on CCX, we are only able to listen to prompts and go into the AA menu options internally, but when calling from outside, nothing, it keeps ringing.
I changed the codec back to G.711 from CCX’s service parameter, and called from outside, the CCX opens the script yes, but not playing any prompts…
Although the gateway used to work with IPCC normally, I had configured codec G.729 and ran it under a special dial-peer dedicated for CCX trigger DN, still nothing changed..
Any guides please.
AT

Does not matter if you are using MGCP or H323 the same rule applies for xcoding needs. The bigger question is what has changed as part of the upgrade as there should be no changes from operations point of view.
I would suggest checking if there are media resources such as Xcoder that for some reason did not register after the upgrade. Also, is the site with the GW experiencing the issues remote from the UCCX server? If you want to use G729 for calls into the GW simple change the region assigned to the GW's DP to use G729 between itself and the UCCX cti ports.
HTH,
Chris

Similar Messages

Weird Can not access class from outside package problem

Hi, I have this problem and it seems the error message is very clear what the problem is but I did make the GeneralTestResult class PUBLIC already. What could be wrong? I did search for it but this is too general and didn't find any solution. Anyone can point out the problem? TIA.
public abstract class GeneralTestResult
public static int FAILING_THRESHOLE = 25;
public abstract String getTestName();
public abstract boolean isPassed();
public abstract int getLeftEyeResult();
public abstract int getRightEyeResult();
public abstract Calendar getTestDate();
// in a different file
package VisionSaver.Tests.TestResults;
import java.util.*;
public class AcuityORContrastTestResult extends GeneralTestResult
private String m_testName;
private int m_leftEyeVision, m_rightEyeVision;
private Calendar m_testDate;
// in a different file
package VisionSaver.Tests;
import VisionSaver.Tests.TestResults.*;
public class Acuity extends VirtualKeyboard implements ActionListener, Runnable, WindowListener
AcuityORContrastTestResult r = new AcuityORContrastTestResult(...);
}The compiling error is:
"Acuity.java": GeneralTestResult() in VisionSaver.Tests.TestResults.GeneralTestResult is not defined in a public class or interface; cannot be accessed from outside package at line 529, column 40

The GeneralTestResult class is a packaged class. Sorry, when I cut and paste, I didn't copy everything. So here is the complete GeneralTestResult file:
package VisionSaver.Tests.TestResults;
import java.util.*;
public abstract class GeneralTestResult
public static int FAILING_THRESHOLE = 25;
public abstract String getTestName();
public abstract boolean isPassed();
public abstract int getLeftEyeResult();
public abstract int getRightEyeResult();
public abstract Calendar getTestDate();
}From the compiler's message, it seems like the import is OK. It just won't allow me to access non-public class but my classes here are declared public. Any other ideas? TIA

SSH and media wiki not connecting from outside of my LAN

I cant seem to connect to ssh or my mediawiki server from outside of my LAN. Ive forwarded all the needed ports and been going over my config all night. I also made sure my router wasn't blocking anything.
-ssh tells me connection denied
-when i go to my http server i can list directorys but as soon as i try to load media wiki i get a 502 error
*these problems do not happen if im connecting from another machine in my local LAN
This is my sshd_config
# $OpenBSD: ssh_config,v 1.25 2009/02/17 01:28:32 djm Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
#Host *
# ForwardAgent no
# ForwardX11 yes
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
#HostbasedAuthentication yes
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
#AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
#Port 22
Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
# EscapeChar ~
# Tunnel yes
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
#RSAAuthentication yes
#PubkeyAuthentication yes
#HostbasedAuthentication no
#PasswordAuthentication no
#HashKnownHosts yes
#StrictHostKeyChecking ask
#LoginGraceTime 120
#PermitRootLogin no # (put yes here if you want root login)
hosts.deny
# /etc/hosts.allow
sshd: ALL
mysqld: ALL
# End of file
# /etc/hosts.deny
ALL: ALL: DENY
# End of file
hosts.allow
# /etc/hosts.allow
sshd: ALL
mysqld: ALL
# End of file
I feel like its a security policy or something im not catching.
Ive been searching and working to fix this all night to no avail.
Thanks ahead of time for any help.

djszapi wrote:
Hello ahronzombi!
Do you try it with apache web server ? If yes, is there any related information in the apache.log when someone try to connect from out. What's in your http server related config files, vhosts, etc?
Ill try that today. i tried something similar with sshd and looked at the verbose output of the program when trying to connect remotely. it was never touched, like no one tried to connect. i feel like its a network security issue since i can connect locally. but ill check these logs as well

2010 Publishing Approval Workflow not triggered from Office 2010 application

I have a peculiar situation to which I have been Googling for weeks now but to no avail.
Basically, I have configured a publishing approval workflow to fire when the user checks in a word document as a Major version. I tested it and all was fine. I later found that on a select few PC's on the office network the prompt (workflow initiation
form) was not popping up when checking the document in via the office 2010 word client and therefore the workflow wasn't being initiated.
I have gone down many avenues of group policy, SP permissions, AD settings, even reinstalling office but nowhere nearer to solving the issue.
Please bear in mind I have it configured correctly from a SharePoint point of view i.e. checked the box to allow workflow to be manually started & start to approve publishing on major version.
This might be a clue: it works when checking in via SharePoint but not when checking it in via word, therefore indicating a desktop client or office issue.
Does anybody have any knowledge of what triggers the initiation form to fire and what might block it or not register its existence from an office app point of view? Any general comments would be welcome.
Spec of problem machines: - Windows 7 (x32/64), Office 2010 Std, SharePoint 2013 server (but using 2010 workflow in this case).
Marc Grocott

Hi Marc,
Based on your description, my understanding is that when you check in a major version from word, the workflow initiation form not appear.
In order for Document Approval workflows to work seamlessly with word, you can tick the option: "Allow this workflow to be manually started by an authenticated user with Edit Item Permissions".
Here is a detailed article for your reference:
Approval workflow does not start from Microsoft Word
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Search help is not triggering second time in interactive form

Hi,
I have online interactive form in WDABAP. And I have few search helps in the form, If i click on any search help it is opening and I can select the value and the same is populated to the field. But if i click it again search help is not opening.
Only one time it is triggering and also after I clicked one serach help, other search helps also dont work.
Can some one guide me? Is it something to do with scripting or any other configuration?
Now Im using ALD7.1 and Reader version is 8.1.0.
did any one faced this problem? Really appreciate if some one can help me on this.
Regards,
Ravi

hi,
The following code is generated in the preopen event of the valuehelp.
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 710.20061129084151.349066.349066 - ValueHelpDropDown.xfo
                   var processingValueHelp = ContainerFoundation_JS.getGlobalValue(event.target, "processingValueHelp");
                   if(processingValueHelp == false) {
                       ContainerFoundation_JS.setGlobalValue(event.target, "processingValueHelp", true);
                       this.rawValue = "";
                       this.clearItems();
                       ContainerFoundation_JS.SendMessageToContainer(event.target,
                                                                     "valueHelp",
                                                                     this.dataNode.somExpression.replace(/(xfa.?\.)(datasets.?\.)(data.*?\.)/, ""),
                                                                     this.rawValue,
                                                                     event.target.mouseX,
                                                                  event.target.mouseY);
                   // END OF DO NOT MODIFY
I have tried placing this code in click event instead of preopen.But still no use. Can we make changes to this code? Can some one give me some idea what changes need to be done..
Regards,
Ravi

Windows server anywhere access not working from outside the lan

ok so heres what i have done so far i installed windows server 2012 essential on a computer followed the wizard to add a couple of users and gave them anywhere access followed the wizard and ran the anywhere access to completion setup the ports 80 and 443
on router manually to forward to my router ip 10.0.1.20
my server is still on dynamic ip
then i go to a windows 7 ultimate computer whent to the connect url downloaded the connect tool ran to completion and restarted the computer so far everything working inside my lan i can connect to the server see shared files and open the dash management
now i go outside connect to a wired or wireless network of a friend and try to connect to http://xxxxxxx.remotewebaccess.com
but am unsuccessfull then i check on my network adapter page and see that there is a new adapter that is called as my remotewebaccess.com so i click on it and try to connect but still fails........
please help what am i doing wrong?
i checked everywhere and cant find a solution.
Thank you

It is probably better to assign a static IP to your server, but OTH it may not change. But you really hate to go off on vacation and have the ip change and everything break.
Now you said you forwarded ports 80 and 443 to your router, I bet you meant your server?
Do www.whatismyip.com and from outside ping xxxx.remotewebaccess.com and make sure they are true same ip
From a PC or the server on your network go to grc.com and do shields up and make sure it reports 80 and 443 as open
Grey

SMB not working from outside local network

Hello,
On my old MacBook I installed OS X Server to create a file sharing server. I set it up using my public IP address so that I could access my files from outside the local network. I don't have an Apple router, but I found the port number for SMB and AFP and did the port forwarding. My issue is that smb stopped working. It used to work out side the network because it tested it. My Mac can still connect though outside the local network using my public IP. I have no clue why SMB is not working as it was working recently. My only idea is that I got a new modem from my ISP. Could that make a difference? I don't get it because AFP still works fine. File sharing using SMB is checked in the server app and file sharing preferences so it is not that. I am using OS X 10.8.4 on a MacBook running OS X Server version 2.2.1. Any help would be appreciated.
Thanks,
Michael

Is it a modem only, or is it a modem/router that might be creating a double-NAT on your network?
Incidentally, since you're running Server, you might want to use the built-in VPN gateway to give yourself better security - tunneling AFP/SMB through a router/firewall is pretty insecure.
Matt

FTP on Mac OS X Server - not accessible from outside

I need to set up FTP on my mac mini urgently as I need to share over 0,5 TB of video material for a "last-minute" production.
I have set everything up wth shares and all and have a "XYZ" user under "Local Network User" so i can give others this username/password and have services FTP and File Sharing enabled for this user. Yet I can not connect to my server via FTP and 21 port from outside world, although FTP is enabled both on router and as a service in Mac OSX Server app.
What am I doing wrong? VPN and other services such as email and the rest are working like a charm.
Thanks so much!

Any ideas? Still struggling with this problem...

Central Contract Mngt: Contract Confirmation Out not triggering from ECC

Hi,
Can some one take a look at this and let me know if you have any suggestions
After following note 1268821 we have Contracts replicating from SRM to ECC via PI. However we are not getting the Contract Replication Confirmation Out triggering from ECC to SRM The configuration in PI is waiting to receive PurchasingContractSRMReplicationConfirmation_Out from ECC for delivery to PurchasingContractSRMReplicationConfirmation_In in SRM.
Does anyone know what we maybe missing, perhaps a setting in ECC that will trigger the Confirmation Out to SRM?
Any help much appreciated.
Che

Just an update.
It turns out that ECC is generating message PurchasingContractERPConfirmation_Out which is contrary to what we are expecting PurchasingContractSRMReplicationConfirmation_Out.
Have logged it with SAP support for now.

HELP PHONE NOT CHARGING FROM WALL ANYMORE!!!!

I had this problem last night i was checking my yahoo e-mail and preceded to download a picture to my e-mail as the picture was downloading the iphone locked up i was unable to do anything not even power the iphone off or get back to home. all i did was wait for the battery to drain down ( because the picture i was downloading was frozen and the light on the iphone stayed on) once i got home and plugged the iphone back in to charge ( beacuse battery went dead) the apple logo showed up and the phone seemed to be back to normal so i thought the only way it will charge now is if i have it hooked in to my IMAC. the icon for charging is working while hooked up to the mac but for the **** of it i tried charging from the wall (tried different outlets that all work) and the thing will not charge. it will only charge from the computer only why is this please help someone
IMAC G5 20" INTEL, IPHONE 8G, IMAC G4 17", IPOD 60G Mac OS X (10.4.10)

Same thing happened to me. Suddenly, I could not charge from the wall outlet. To test it, I also tried to charge my iPod from the unit and it didn't work. Went to Apple Store and got a new USB wall charger, even though the Genius guy gave me a hard time and was convinced nothing was wrong with my charger. He exchanged it, I took the new one home and it works perfectly.
I have read that other people's chargers are defective, too. Hope this helps.
MacBook Pro 2.16 Ghz Mac OS X (10.4.10)

Mappings not triggered from Process flow?

Hi,
I have some mappings under a process flow..they are triggered daily but today they were not triggered can anyone tell me how to go about this?

Hi ,
If you have deployed the schedule then it will be in Disable state .
You can check that by logging into SQL*PLUS as the Target user and running
select job_name, state from user_scheduler_jobs;
Use the Schedule tab on the Control Center Jobs panel in the Control Center Manager to schedule
the job. Highlight, right click the job and from the pop-up menu select "start". Use the same query to check the current status:
select job_name, state from user_scheduler_jobs;
The above query will show whether the scheduled job is SCHEDULED, RUNNING or SUCCEEDED.
Thanks,
Sutirtha

BADI PROCESS_PO_CUST is not triggered from APO tcode /n/sapapo/snptlb

Hi ..
We are using BADI : PROCESS_PO_CUST to make Client Specific Changes and is Working Fine in R3.
But While create PO in APO Via transaction(/n/sapapo/snptlb) this BADI is not triggered.Please let me know if you have any inputs on the same
Cheers
Mukundan.R

Solved. Thanks to ABAPOne.
Referring to: FIELDSELECTION_ITEM method in ME_PROCESS_PO_CUST Badi

NLB address not reachable from outside

Hi experts,
I experience the following problem - I have a Windows NLB cluster of 3 servers, however I'm not able to reach or ping the virtual address from the outside. I can ping it from any of the hosts included in the cluster, but not from the hosts
not being a part of a cluster - even in the same subnet.
Another thing worth mentioning is, that every single host is displaying only itself in the cluster. However if you want to add one more node which is not shown it says it is already a part of the cluster. If you then connect to another
node via NLB Manager it jumps under the same cluster name. So you can connect to all three of them one by one and then they show up but not after you initially load the NLB Manager. All the nodes are Converged and started, they are marked green. Any clues
on where to start troubleshooting?

Hi Dariusz Nowara,
“that every single host is displaying only itself in the cluster” this case show it is incorrect configuration when you create cluster, please refer the following related information
to correct them first.
Network Load Balancing cluster node does not successfully converge
https://support.microsoft.com/en-us/kb/812870/
The similar thread:
NLB Manager donot show the other host
https://social.technet.microsoft.com/Forums/windowsserver/en-US/9262c47a-cfe1-4696-9442-dd8d82651891/nlb-manager-donot-show-the-other-host?forum=winserverClustering
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Excel 2007 - Files will not open from outside of Excel 2007

Hello,
I'm a new user of Xcelsius 2008, in fact I just had it installed yesterday. The issue I've come across ever since the install, is when I attempt to open an Excel 2007 file from My Documents window (i.e Windows Explorer) a new instance of Excel will open, churn for a few seconds and then nothing...the file doesn't open nor is there a new workbook, all I see is a blank Excel screen.
I am however, able to click on Open within Excel, navigate to the appropriate location and open the file that way.
A couple notes: a) yesterday I also had Business Objects XI 3.1 installed yesterday, one of the options is "Enable Office Add-ins" I've tried to open files through Explorer with and without this enabled. b) When I try to open a file with Explorer, at the bottom of Excel I see: "Opening:EUROTOOL.XLAM" for a brief moment, and again, all I'm left with is a new instance of a blank Excel screen.
Any help would be greatly appreciated!
Thanks!
Chase K.

Hi Chase
Welcome to the forum!
Well its the newbie gotcha! The behavior is caused by Live Office compatibility mode. Go to File - Preferences - Excel Behavior and turn it off, disable it, uncheck it! Exit Xcelsius and restart.
You'll probably never have to use internal LO mode since the recommended workflow if you're using LO is to do it outside of Xcelsius anyway.
I know its hard to read all the info when you get a new product. But the initial LO compatibility screen you clicked through does warn about this.
And don't forget to update to the latest FP2, it'll save you posting about issues that have already been fixed.
Andy

Set up LAMP server, but not viewable from outside.

I set up a LAMP server, followed the guide http://wiki.archlinux.org/index.php/LAMP there. I can view it from localhost or the IP address or the web address http://plaufcan.homeunix.org. But it is not viewable outside of my local network. What else do I have to do?

If your router is showing an external IP address of 192.x.x.x, I am guessing that you are on a DSL line, and that you more than likely used the windows setup software to configure your internet connection.
Basically, when you run the software, many of the modems go into a very dumb router configuration. Your router is picking up a natted ip address from the modem, and using that to update dyndns.
# nslookup plaufcan.homeunix.org
Non-authoritative answer:
Name: plaufcan.homeunix.org
Address: 192.168.2.101
I'll bet you dollars to donuts that you can open your browser and go to http://192.168.2.1 (or alternatively http://192.168.2.254) and you'll get access to the modem. You'll have to find the page that allows it to be set to a bridge. After that, you'll have to set the router up to do any authentication that your ISP requires.
One of the large ISP's in Canada use modems like this for their DSL, and it causes no end of problem when SOHO users add another router. NATted NAT connections do not always play nice.

Help, CCX7 not triggered from outside, codec problem.

Similar Messages

Maybe you are looking for