SetDataSource not setting the data on some reports.

I am working with a VB6 app, and it uses Crystal Reports 8.5. It used to work when I had unbound fields on the reports, but my boss said we need to use bound data fields.
So I changed the reports to use bound data, but only some of the reports now work. The data being passed to the reports is in the form of a recordset. I have a check in place to make sure there are records to post, and for some reports, it acts as though no data was passed at all.
On some reports I get an error "Unable to access first record." Then it tells me "SQL Server Error." But I am using MS Access as the datasource, and I have checked to make sure that all the fields in the database have not changed in any way to what was used in design time.
Any help would be greatly appreciated.
Thanks,
Chris

Hi, Chris;
We just have one instance of that error:
[Link|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313334333533383337%7D.do]
When passing a Record set to a report, the report should have been created using a TTX file. See the following articles:
[TTX|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f008593a-9e1d-2b10-1692-f9966d876b6b]
[TTX2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5050904e-911e-2b10-009f-b5c857d0c0d4]
Regards,
Jonathan

Similar Messages

View not displaying the data in some of the clients

Hi,
Apps - 12.1.3
DB 11gr1
OS- RHEL 5.6, 64 bit
We have an application which is built using .net , but the database is 11gR1 we are connecting vis ODAC ... it was working good.
But when we treid to move to other server, we created a user B , created a VIEW.
But we are facing one strange problem that - when i query its showing data in client PC , but when i ran it from Windows Server 2008 R2 edtion no data is displaying?
Any hints y?
Thanks

Hi;
Is there any error message in alert and also tns,listener log? If no than I suggest rise SR
Regard
Helios

Newbie question about setting the date of a UIDatePicker

I created a UIDatePicker in my view and called it targetDate.
If I don't set targetDate's date property, the UIDatePicker shows up by default with a date of November 30, 0002.
So, when the view loads, I did this:
NSDate *today = [NSDate date];
targetDate.date = today;
(Note: in the above expression, the square brackets around "NSDate date" don't show up and are turning the expression into a link instead.)
After doing that, when the view loads the UIDatePicker object initially shows the correct month and date, but it shows 0001 as the year.
So my question is, why doesn't this set the correct year?
In the Interface Builder the UIDatePicker's minimum and maximum dates are set from 1/1/0001 to 1/1/4001. I don't know if that has anything to do with the problem. I assumed that was just setting the allowed range for picking.
I don't know what the "Date" setting field in the IB above the minimum date field is supposed to be for either.
Anyway, am I not setting the date property correctly?
Thanks,
doug
Message was edited by: Doug Lerner2

Instead of setting the .date property when the view loads I ended setting it when the UIDatePicker is displayed and the date setting works ok now.
By the by, if you have very early dates set, like January 1, 0001, the dates of the months are off by a few days. I guess that has to do with the whatever happened like 1000 years ago when they made a big adjustment to the calendars.
doug

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

Trying to programmatically set the data-source for a Crystal reports report.

I've got the following existing procedure that I need to add to in order to programmatically set the data-source (server, database, username, and password) for a Crystal reports report.
I added the connectionInfo parts, but can’t figure out how to attach this to the existing
this._report object.
This is currently getting the connection data from the report file, but I now need to populate this connection data from a 'config.xml' text file.
Am I trying to do this all wrong?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using CrystalDecisions.CrystalReports.Engine;
using WGS.Reports.Reports;
using CrystalDecisions.Shared;
using WGS.Reports.Forms;
namespace WGS.Reports
public class ReportService
ReportClass _report;
ParameterFields paramFields;
ConnectionInfo connectionInfo; // <- I added this
public ReportService()
public void DisplayReport(string reportName, int allocationNo)
if (reportName.ToLower() == "allocationexceptions")
this._report = new AllocationExceptions();
PrepareConnection(); // <- I added this
PrepareAllocationExceptionReport(allocationNo);
this.DisplayReport();
private void PrepareConnection() // <- I added this
//test - these will come from the config.xml file
this.connectionInfo = new ConnectionInfo();
this.connectionInfo.ServerName = "testserv\\test";
this.connectionInfo.DatabaseName = "testdb";
this.connectionInfo.UserID = "testuser";
this.connectionInfo.Password = "test";
this.connectionInfo.Type = ConnectionInfoType.SQL;
private void PrepareAllocationExceptionReport(int allocationNo)
this.paramFields = new ParameterFields();
this.paramFields.Clear();
ParameterField paramField = new ParameterField { ParameterFieldName = "@AllocationNo" };
ParameterDiscreteValue discreteVal = new ParameterDiscreteValue { Value = allocationNo };
paramField.CurrentValues.Add(discreteVal);
paramFields.Add(paramField);
private void DisplayReport()
frmReportViewer showReport = new frmReportViewer();
showReport.ReportViewer.ReportSource = this._report;
showReport.ReportViewer.ParameterFieldInfo = paramFields;
showReport.ShowDialog();
showReport.Dispose();
Any help would be much appreciated.

Hi Garry,
Please post SAP Crystal Reports questions in their own forums here:
SAP Crystal Reports, version for Visual Studio
We don't provide support for this control now. Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

If the data network is not available for some time, to get it again we need to restart the phone instead it is not finding the data network instantly. why cant the iphone searches data net work offten if not available. i am totally disappointed with this!

Still it could not find the data network.it searches for voice network instantly and works too. but even full voice network available, there is no data network.when i restart the phone it could find data network.
Already i reset network settings for two times.

My preferences are set to 'show informational overlay' but when I scroll through events I do not see the date as I'm supposed to. I only see the date underneath the event. What am i doing wrong?

I so not see the date as I scroll through my events and I have my preferences set to 'show informational overlay'. They only date I see is below the event. What am I doing wrong?

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
OT

Problem while exporting the data from a report to an excel file.

Hi SAP guru's,
I have a problem while exporting the data from a report to an excel file.
The problem is that after exporting, the excel file seems to have some irrelevant characters....I am checking this using SOST transaction..
Required text (Russian):
Операции по счету
№ документа     Тип документа     № учетной записи     Дата документа     Валюта     Сумма, вкл. НДС     Срок оплаты     Описание документа
Current Text :
   ? 5 @ 0 F 8 8 ? > A G 5 B C
!   4 > : C       "" 8 ? 4 > : C      !   C G 5 B = > 9 7 0 ? 8 A 8        0 B 0 4 > : C         0 ; N B 0      ! C <       ! @ > : > ? ; 0 B K        ? 8 A 0 = 8 5 4 > : C
Can you help me making configuration settings if any?
Regards,
Avinash Raju

Hi Avinash
To download such characteres you need to adjust code page to be used during export. You can review SAP note 73606 to identify which code page is required for this language
Best regards

Deleting the data in the infocube will delete the data in explorer reports?

Hi,
I have some explorer reports based on the BW queries.
1. I have deleted the data in BW but when I go and check the data is still visible in the explorer reports ? Is there any option once I delete the data in BW the data should also be deleted in the explorer?
2. Once I transport these explorer reports from dev to Quality, if the quality system cube does not have the data then these explorer reports does not show up any data or else it carries the data as well from the devlopment system?
Regards
A

hi,
Explorer reports will take data from Indexes in BWA, so it will show data even if you delete the data from cubes.
you will have to index your queries/ cubes again if you need the latest data.
I guess this can be scheduled through process chains.
Regards, Mayur

Can not set remote error true in reporting service's properties's advanced

can not set remote error true in reporting service's properties's advanced
美斯: 唔理幾多個皇上啦, 個波呢家係皇上果度!!!

Hello,
Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Are you get some error messages when you set EnableRemoteErrors to true? Or do you mean that it doesn’t
throw error message to us, but the property is useless? And could you tell me the edition of your SQL Server?
It is benefit for us to do further analysis. Thank you for your understanding.
The following document may help you:
http://technet.microsoft.com/en-us/library/aa337165(v=sql.110).aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

SetDataSource not setting the data on some reports.

Similar Messages

Maybe you are looking for