SetDpmServer.exe (4.1.3465.0) on Windows Server 2012R2 (Azure VM) This app can't run on your PC: Access denied

Hi,
I've installed on a Windows Server 2012 R2 (Azure VM) the DPM agent 4.1.3465.0. This VM is not a domain member of my DPM 2012 SP1. So I ran the command
SetDpmServer.exe -dpmServerName dpm.domain.com -isNonDomainServer -userName dpm -productionServerDnsSuffix
domain.com
Although I'm running the command prompt as Administrator I receive:
This app can't run on your PC
And in the command prompt I see: Access denied
How can I tackle this?
Thanks,
John
John

Hi John,
Here are 2 things I would like to confirm.
1. Please confirm if Protection Agents is installed on target computer before running the command line.
In following article it provides the command line which you are using now. However it mentioned to install Protection Agents manually on target server first:
Installing Protection Agents on Computers in a Workgroup or Untrusted Domain
http://technet.microsoft.com/en-us/library/ff399479.aspx
And please noticed the 2 community additions:
1. make double-click on DPMAgentInstaller_x64.exe without specify DPM server name
2. follow the examples in this article:
http://technet.microsoft.com/en-us/library/ff634193.aspx
1). Enable NETBIOS over TCP/IP on BOTH DPM Server and proposed managed machine's WINS tab of NIC card properties sheet Local area connection status -----> Properties -----> Internet Protocol Version 4 -------> Properties ----> Advanced ----->
WINS tab. Also assumes disable Windows Firewall OR create needed port openings.
2). When using SetDpmServer.exe command also CRITICAL to use ONLY NETBIOS name of DPM Server and do NOT include [-productionServerDnsSuffix <DnsSuffix>] end command at username.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Setup.exe "This app can't run on your PC"

Hello, I've been trying to install Windows 8 on my macbook pro (mid 2012) using boot camp. I was using a windows 8 .iso file with a flash drive. I got Windows 8 installed and running, but when I tried to install the boot camp drivers off of the flash drive (setup.exe) I keep getting a fullscreen error message saying "This app can't run on your PC. To find a version for your PC, check with the software publisher." I've tried redownloading the windows support drivers to the flash drive but it didn't work. I'm having trouble finding any instance of this on all of the forums I checked and it is geting very frustrating. If anyone can help with this it would be much appreciated.

I think I found the problem, I discovered that I had installed a 32 bit windows 8 instead of the 64 bit one. Based on some other threads I've seen I'm guessing this is the problem and will post again when I'm finished reinstalling the 64 bit version in case anyone is curious.

Using Windows 8 64-bit and downloaded itunes 11 but when i run the installer it says "this app can't run on your pc".. any help?

Any Help with this? Very frustrating

Clear your browser cache and try downloading again. Make sure you get the 64 bit installer.
tt2

How many licence for Windows Server 2012R2 in hyper-v cluster base on free Hyper-V Server 2012R2

Hi
I build cluster consist 4 nodes (2 procesors, 4 core per procesor=8 virtual processors per node). I installed free Hyper-V Server 2012 R2 on each node and created cluster.
I've got one Windows Server 2012 R2 Standard. How many VMs (with Windows Server 2012 R2 Standrard as OS) can I run on this cluster using this DVD? 1, 2 or none?
Thank you in advance
Tomasz
Kind Regards Tomasz

The detail here is this:
You are asking about the 'virtual instance granting' license.
- this only applies if Windows Server is installed on the bare metal with the Hyper-V Role added. (regardless of the edition)
- this only applies to licensing, it does not limit the number of VMs that you can run.
- If there is a cluster, all nodes should be the same edition to remove any licensing ambiguity.
This is strictly OS licensing for the VMs and has absolutely nothing to do with how many VMs you can run:
Most likely your hardware will run out of physical resources before you reach the maximums outlined here:
http://technet.microsoft.com/en-us/library/jj680093.aspx
If you have a cluster - there can be a maximum of 8,000 running VMs
If you have individual Hyper-V Servers there can be a maximum of 1,024 running VMs
Do the math - you would need a minimum of ~8 cluster nodes to touch that 8,000 number. But as you add nodes, you don't add HA VM capacity. But you can run a combination of HA and non-HA VMs up to a the maximum of 1,024 running VMs per node.
In other words, mix and match if you want to push the boundary.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

How to Migrate windows 2008r2 RDS server to Windows server 2012r2 RDS

Hi, I want to migrate our 2008r2 RD server + Cals to windows server 2012r2 server, the user will still connect to 2008r2 server but the server hosting the license will be migrated to a 2012r2 server. Currently I have 2 servers that users can connect
to that are served by the 2008r2 RDS (the server I'm converting is just hosting the license) the server user connect to point to this license server. How do I proceed to migrate, I'm searching for documentation but I can't find much, I found that I can only
convert to 2012r2 from 2012 or better OS, so I installing a temporary 2012 server to do a double migration seem to be the best course of action but I can't find any documentation on how to Migrate the Remote Desktop Services Role Services from 2008r2 to Windows
Server 2012.
Also I just discovered that this server is also hosting license for windows server 2003 terminal service. Will I be able to host these licences on 2012R2 ?
Any pointer would be appreciated.

Hi,
It seems like migration the Remote Desktop Services Role Services from 2008r2 to Windows Server 2012 is not supported.
http://technet.microsoft.com/library/dn479239.aspx
So i think you may install and configure the RDS server on Windows Server 2012 and then migration to Windows Server 2012r2.
Hope this helps.
Regards.
Vivian Wang

Windows Server 2012R2 DHCP Load Sharing Mode

Hello,
I am planning to migrate a standalone DHCP Server on Windows 2003 to Windows Server 2012R2. With this migration, I like to use the 2012R2 Load Sharing Mode feature for DHCP. This implementation cover TWO sites.
My initial plan was to have two Windows 2012R2 DHCP Servers (virtual) at each site thus servers at each offers site redundancy as well. So two at Site 1 and two at Site 2 on load sharing mode. If ServerA at Site 1 goes down for some reason Server B
at Site1 will service the DHCP clients in load sharing mode without going to Site 2. I came across a MS document that says:
Number of Servers: DHCP failover is not supported for more than two DHCP Servers. The failover relationship is always comprised of two DHCP servers.
Does this mean I can have only TWO DHCP Servers in a load sharing mode. One at Site 1 and the second one at Site 2??
Thanks in advance
TIA TP

Hi,
The DHCP failover relationship is comprised of DHCP server and its partner. In a relationship there are just 2 DHCP servers.
But this doesn’t mean you can just use 2 DHCP servers in your sites. The DHCP failover setting is based on DHCP scope, for one DHCP scope there could be just one DHCP failover relationship including 2 DHCP servers. If you have more than 1 DHCP scope,
for example, set DHCP failover relationship between DHCP server 1 and DHCP server 2 for scope A. then set DHCP failover relationship between DHCP server 1 and DHCP server 3 for scope B.
The document Step-by-Step: Configure DHCP for Failover(http://technet.microsoft.com/en-us/library/hh831385.aspx) is a introduction about this function and for your reference.
Depends on the DHCP scope’s configuration and the requirements of your network. You may enhance or customize the architecture of implementation.
Best Regards,
Eve Wang

Windows Server 2012R2 - svchost.exe 60-100% load!

We are using RDS collection with two Windows Server 2012R2 session hosts. Both hosts are virtual servers (clean installation) and are used as session hosts (terminals) with 10 to 25 users each. RDS Connection Broker is also virtual machine with Windows
Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0.
There is problem with high cpu load on these servers. Sometimes Svchost.exe starts to cause 60-100% load. Our virtual machines have 10 virtual processor cores. Load is caused by LSM (Local Session Manager) Service from DCOM Launcher group. Svchost
creates many thread as you can see on picture attached. Sometimes this load disappears after 12-24 hours, sometimes it needs restarting whole server.
We still cannot find cause of this problem, although we managed to reproduce this issue one time by logging two admin accounts to server console and force disconnecting one of these accounts by third admin account connecting to server console by RDP
mstsc.exe with -admin parameter.
Our users are very unsatisfied :-(
This is screenshot of Process Explorer - svchost.exe - Threads:

Hi,
Thank you for posting in Windows Server Forum.
Do you have any recent updates, might happens due to automatic updates which also can cause high cpu through svchost.exe. Please check as suggested by “Larry” by turning off Windows update service. In addition go through beneath articles for more information.
1. Automatic Update causes SVCHOST.exe high CPU
2. Getting Started with SVCHOST.EXE Troubleshooting
Hope it helps!
Thanks,
Dharmesh

Can't create ODBC connection in Windows Server 2012R2

I just finished installing the instant client & odbc connection on Windows Server 2008R2. I then attempted to perform the same installation on a new Windows Server 2012R2 instance and encountered the following issue.
After extracting the contents of the 64bit instant client & odbc files into c:\oracle\instantclient_12_1, adding this to the path statement, and adding a TNS_ADMIN environmental variable, I successfully ran odbc_install.exe from an admin cmd window. I then opened the 64bit ODBC Data Source Administrator, clicked add, selected the Oracle in instantclient_12_1, and clicked finish. As soon as I did so, I received the following error: "The setup routines for the Oracle in instantclient_12_1 ODBC driver could not be loaded due to system error code 126: The specified module could not be found. (c:\oracle\instantclient_12_1\SQORAS32.dll)"
I uninstalled the odbc client (odbc_uninstall.exe) and attempted again with the 32bit version & 32bit odbc configuration screen. I get the exact same result with 32bit as I do with 64bit.
Any help would be appreciated.
EDIT: Nevermind. Apparently I needed the Microsoft Visual C++ 2010 SP1 Redistributable Package for the correct DLLs

Hi,
I am running Netweaver 7 and ERP2005.
J2EE support pack is 9. The sap note that you mentioned is for NW2004 and our system is running on NW2004s.
Now I am trying to reconfigure the sld. In case if you can suggest me another solution, I will be very happy to try that out...
Thanks for your reply
Edited by: Rakesh Bothra on Apr 20, 2011 4:23 AM

Error While installing Visual Studio 2005 in windows server 2012R2

Hi Team
One Help
I am using windows server 2012R2.I want to install visual studio 2005.
i downloaded VS 2005 from :
http://www.microsoft.com/en-us/download/details.aspx?id=804
while installin i am getting this error :
"the upgrade patch cannot be installed by the windows installer service because the program to be upgraded or missing or upgrade patch may update a different version of the program.Verify that progam to be upgraded on exiting computer that you have
the correct upgrade patch"
PLease help us.
Thanks,
Bob

Hi Gopi,
Are you trying to add the hosts to your OEM 12c, and then choosing "Deploy Agent"?
Please check this error message about the image file..
The image file C:\oracle\core\12.1.0.2.0\jdk\bin\java.exe is valid, but is for a
machine type other than the current machine.
"Validating OMS_HOST & EM_UPLOAD_PORT failed."
If the agents are deployed earlier from another OEM12c server, please undeploy them and then try.
Thanks,
Rajiv.

The Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes

since yesterday 08/10/2011 the Firefox window doesn't open at all I can't run safe mode or make other trubleshot changes. When I click on the desktop short-cut the Firefox windows starts loading but before open is crushing.I have sent several messages to you but no answer and my Firfox is not working.

Which version of Firefox and which OS are you using?
There are other ways of opening safe mode given at http://kb.mozillazine.org/Safe_Mode - See if that helps.

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Windows Server 2012R2 Failover Cluster error with mounted volumes

Hi all,
I've a problem with mounted volume on a WSFC build on top of Windows Server 2012R2, the situation is:
M: is the volume hosting mounting points
disk-1, disk-2, disk-3 are volume mounted on M:\SomeFolder
Theese volumes are used by a SQL Server Failover Cluster Instance, but my problem is related to WSFC. I've set dependencies so disk-1, disk-2, disk-3 depend upon H:
If I try a failover of the role "SQL Server" I observe that when the disk come online in the other node they fail with this error:
Cluster resource 'disk-1' of type 'Physical Disk' in clustered role 'SQL Server (ISQL2014A)' failed. The error code was '0xaa' ('The requested resource is in use.').
Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it. Check the resource and group state using Failover Cluster
Manager or the Get-ClusterResource Windows PowerShell cmdlet.
If I manually take offline H: and than bring it online and then manually take online all disk (1 to 3) they come online with no error.
I'm going crazy!

I've found the root of the problem: the servers are virtual machine on a VMware ESX 5.5 infrastructure, VMware claims that on 5.5 multipath is supported for raw device mapping disks but disabling multipath (I've set to fixed path) the Windows Server Failover
Cluster stops to get problems.
Now we have opened a support call with VMware.

Installing MS Exchange on Windows Server 2012R2 Essentials?

Hi Guys,
I am having trouble finding the appropriate answer to my question - is it possible to install MS Exchange 2013 on Windows Server 2012R2 Essentials edition? Needless to say that this server will be a DC as well - I am aware that it is ot recommended to install
Exchange on domain controller but that is not my question here. I just need to know if it can be installed on 2012R2 Essetials edition? Thank you.
Dino

No. I'm not aware of any documentation showing how this can be done.
Too complicated, the sharing of the IIS the needed ARR..... not supported...not recommended. You get the idea.
That ship has sailed.
Unfortunately TechNet subscriptions aren't coming back, sorry folks :-(

Some Word Files will not open on Windows Server 2012R2

I have identical versions of Word 2010 on two different computers. One is Windows 7, and one is Windows Server 2012R2. The Win 7 is my primary writing machine but sometimes I need to open a Word file on the other machine.
Some of the files open fine on Windows2012 machine, but some give me an error:
"Word experienced an error trying to open the file." It then makes some suggestions for things to try, including Repair as I am opening the file, but none of these suggestions work. I keep getting the same error.
I cannot see what is different between the files that open fine and the files that give this error.
They all open fine on the Windows 7 machine.
I have tried do a full Repair on Microsoft Office and then rebooting.
The normal way of sharing the files is to copy from Windows 7 to a cloud location and then downloading on the Windows 2012 machine. But I have also tried emailing the file to myself from Windows 7 and opening the email on Windows 2102. I get the same problem.
What else can I try?
Thanks
Kalen Delaney
HTH, Kalen Delaney www.SQLServerInternals.com

To get round this – right click on the file and select properties. Next click unblock.
see here:
http://answers.microsoft.com/en-us/office/forum/office_2010-word/word-experienced-an-error-trying-to-open-the-file/07b539fa-c641-e011-9767-d8d385dcbb12
KR

I deleted my iMovie from computer and from my purchases list in AppStroe. When I'm trying to download it again from App Store a pop up window comes up and says: "These apps were already assigned to your Apple ID and are available in your Purchases list"

I deleted my iMovie from computer and from my purchases list in AppStroe. When I'm trying to download it again from App Store a pop up window comes up and says: "These apps were already assigned to your Apple ID and are available in your Purchases list". Please help me to reinstall it.

If new versions of iPhoto and the other iLife applications (iMovie and GarageBand) were purchased by the previous owner from the Mac App Store, then they will be locked to the previous owner's Apple ID and cannot be transferred to you. You will have to re-purchase them under your own Apple ID.
If this is an older MBA that came with Snow Leopard or an earlier version of Mac OS X, though, the system would have come with an installation disk that included the iLife applications, a disk which the seller should have provided to you. Those iLife applications would be older versions, of course, and may or may not work in Lion depending on how old they are.
Regards.

SetDpmServer.exe (4.1.3465.0) on Windows Server 2012R2 (Azure VM) This app can't run on your PC: Access denied

Similar Messages

Maybe you are looking for