Setting A4 Paper Size for Smartform

Hi,
The Customer needs the output of a Smartform in A4 Paper but tilted.
As the width of the required output is more and the height is less, the content will fit into one single page but the page has to be tilted. How can I acheive it.
Thanks in advance,
Ishaq.

hi
good
here is the procedure in sapscript,you can try the same in smartform,
1.) Create the letter-size form, let's say: Z_DELNOTE.
2.) Try to make the first form flexible enough so that it can serve as a 'master form', with the only required difference being paper size.
3.) Copy that form into a new one, Z_DELNOTE_A4 and convert the paper size to A4. Adjust any windows as needed.
4.) Set up output config to point to the first form.
5.) In your print program, insert logic before the OPEN_FORM to append '_A4' to the form name field when appropriate (e.g. based on plant).
6.) Perform all subsequent changes to the first form and overlay the second one as in step 3.
thanks
mrutyun^

Similar Messages

How to set the paper size for scan import

Adobe Professional 10 - How to set the import paper size to letter or A4 (for example). The only option is automatic and it scans legal size. Normally the options would appear but I have no options other than "automatic".

Moving this discussion to the Scanning & OCR forum.

Set paper size for image on roll paper

Q I am trying to set the paper size for a H 30cm x W 80cm image using roll paper on an Epson R3000 printer. Computer Dell I7 64b and using Elements 9. Thank-you, John

Garry - Many thanks for the reply. I was following the usual routine but I had never needed to use the 'User defined' box previously but it appears this is vital to the whole process when using roll-paper. I also found that the paper height becomes the Length when using roll-paper. I nearly entered the paper height (as requested) as 10m (length of roll) but you need to enter the length of the actual print required or the print process will start in the middle of the 10m roll! always seems to be that little extra missing from the manuals! John

Setting paper size for multi-tab numbers file?

i have a (currently) 3 tab spreadsheet that someone is working with me on. two of the tabs i print to 12 x 18 and one of the tabs i print to 8 x11.
right now i have to open inspector, set paper size to 8 x 11, go to print view and slider-scale to appropriate size so it will print to single width, open print dialog, select 8 x 11 printer, print the pages from this tab. then i go back to inspector, select 12 x 18, select next tab, go to print view and slider-scale to appropriate size so it will print to single width, open print dialog, select 12 x 18 printer, print the pages. then i select the next tab, go to print view and slider-scale to appropriate size so it will print to single width, and run a print to 12 x 18 paper.
this gets me all three documents if i didn't make a mistake somewhere and forget to select the correct printer or open inspector or whatever.
can someone tell me whether in numbers i can set a PAGE SIZE for a TAB (as i have done above) and have it stick or does the selection of a page size in numbers apply to the whole document? i keep sending this to my bookkeeper and getting it back and this is a whole lot of aggravation that is really messing up my workflow and there seems like i should be able to find a way to streamline this.
note: i am actually /receiving/ xls from my bookkeeper (and exporting to xls when i send it to her) and we also need to keep the tabs together b/c one tab is pulling info from the others but i am wondering if there could be some kind of workaround.
i'd like to ask her to just print the pages to pdf before she sends it to me but this is an added layer of work on her end that is not going to happen. also, i /can/ open in excel (i have excel for the mac) so if this works easier by printing from excel i will do that.
any experience with this issue would be greatly appreciated.
THANKS

hi Y. BIG time thank you for this. i was not aware this was such an issue. i definitely cannot have any ambiguities in my spreadsheet and customizing it in numbers is the whole reason i am spending this time formatting (i.e. to make it intuitive and visual).
that said, if accepting excel and then exporting to excel will cause problems i absolutely cannot have this.
can you help me a little more on what the problems are? i have already got a file with two tabs directly imported from Quickbooks (by my book keeper in excel) and a tab that she set up that pulls data from these tabs - and then i have MY tab that i have been customizing and proofing and fixing as i go along. more info on this work below.
are there commands i can run to clean this up?
what is considered OK to do in numbers if i am accepting excel (printing? adding new numerical entries)?
THANK YOU
background: right now i am /mostly/ doing formatting things like adding bold outlines or adding color or whatever but i have /also/ been dragging and dropping some rows to put them in a better place and fixing some cell sums that were either left out by my book keeper or which needed to be added to check THEIR work. are you saying that by doing this i am setting myself up for various formatting issues such as merged cells?
if so, once i finish the format of the spreadsheet and the tabs i can only exclusively open in numbers if this is necessary. are there some commands i can run to "clean up" issues? for instance can i go around the various tabs and unmerge cells to clean things up?
also, i definitely cannot split up tabs into individual documents as the customized spreadsheets are pulling numbers from a set of tabs that are quickbooks imports....

How to set the paper size when printing to postscript...

I need help in setting the paper size in the PrintPreference when using either the Postcript File or Adobe PDF printer to generate ps files.
Here's what I am doing (in c++) and I seem to be getting only 8.5x11 no matter the document page size:
LPDISPATCH p_Dispatch = Document.DocumentPreferences();
p_Dispatch = Document.DocumentPreferences();
if(p_Dispatch)
DocPreference docPreference(p_Dispatch);
pgOrientation = (idPrintPageOrientation)docPreference.get_PageOrientation();
pageW = docPreference.get_PageWidth();
pageH = docPreference.get_PageHeight();
paperSize = docPreference.get_PageSize();
docPreference.ReleaseDispatch();
p_Dispatch = Document.PrintPreferences();
if (p_Dispatch)
{ PrintPreference printPreference(p_Dispatch)printPreference.SetPrinter(idPostscriptFile);
printPreference.PrintFile(outfile);
printPreference.SetPaperSize(paperSize ); /*I have also tried idCustom but it crashes with invalid parameter for the object type.*/
printPreference.SetPaperWidth(pageW);
printPreference.SetPaperHeight(pageH);
VARIANT vprinterPresetType;
vprinterPresetType.vt = VT_I4;
vprinterPresetType.lVal = CInDesignApplication::idCustom;
Document.PrintOut(FALSE, vprinterPresetType);....
So how do i pas the document paper size to the print preset or preference?
I appreciate your input.

Moving this discussion to the Scanning & OCR forum.

HP Laserjet M401A could not set different paper size and tray on printer properties

Good morning all. I'm experiencing a issue setting custom paper size and tray in this printer properties. I would like to set up three different printers, on the same port, to print directly on a specific tray (without enter the printer properties and select the proper tray and size). I have this printer with the additional third tray. I have set up A4 in tray 1 (bypass), custom size in tray 2 and 3 on the printer. When i enter the printer PROPERTIES i want to set up set custom paper size in tray 2 and 3. No way.The only sizes i can see is 13x8, a4, a5, letter, legal, and so on (there are maybe 7 choices). So i choose NOT SPECIFIED. When i go on printer PREFERENCES, i can set up my custom paper size.But when i choose my custom paper size, the tray 2 and 3 go away and i can only choose bypass or tray 1.If i set up A5 (for example) the tray 2 and 3 re-appear. How is it possible? where i am wrong? Many thanks, any help would be appreciated.Cheers,Luca.

I have done extensive research online and looked for relevant posts in other forums, plus I downloaded a LaserJet 4L service manual. The verdict: A common cause of this no-power problem is a faulty DC controller board, blown fuse(s) on it, or other circuitry glitch. I am sure that the paper tray is inserted correctly.
So I decided to cut my losses (I'm not inclined to pull the printer apart to try to fix it--it's not worth my time) and tossed the printer. It's not cost-effective or time-effective to spend a lot of money or time to resuscitate old hardware, except perhaps as a learning exercise.
I consider this thread now closed.

How can I set a point size for staticTexts

Hi everyone
How can I set a point size for staticTexts?
    staticTexts.add({staticLabel:"Please select a tedious job"});
thanks
Teetan

Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
var stringList = [
"01. digit at end: superscript",
"02. digit at beginning: superscript",
"03. notes applied to italic (table only)",
"04. Initial Cap+ markup",
"05. Small Cap + markup",
"06. del [ ] + markup",
"07. add an EM at beginning",
var win = new Window("dialog","Tedious Jobs_(\"TDJs\")");
this.windowRef = win;
win.grp = win.add ("group", undefined);
win.grp.alignChildren = "top";
win.grp.margins = 5;
win.grp2 = win.grp.add ("group", undefined);
win.grp2.orientation = "Column";
win.grp2.alignChildren = "left";
win.grp3 = win.grp.add ("group", undefined);
win.grp3.orientation = "Column";
win.grp3.alignChildren = "fill";
win.grp2.Txt1 = win.grp2.add ("statictext", undefined, "Please select a tedious job");
win.grp2.Txt1.indent = 0;
win.grp2.Ddl1 = win.grp2.add ("dropdownlist", undefined, stringList);
win.grp2.Ddl1.selection = 0;
win.grp2.sTxt1 = win.grp2.add ("statictext", undefined, "________________________________________");
win.grp2.sTxt3 = win.grp2.add ("statictext", undefined, "Be careful and pay attention in what you selected.");
win.grp2.sTxt3.graphics.font = ScriptUI.newFont ("Arial", "Regular", 10);
win.quitBtn = win.grp3.add("button", undefined, "Ok");
win.cancelBtn = win.grp3.add("button", undefined, "Cancel");
win.defaultElement = win.quitBtn;
win.cancelElement = win.cancelBtn;
win.quitBtn.onClick = function() {
win.close();
if (w.show() == 1) {
                var mRes = mStringList.selection.text;
                mSelection = mStringList.selection.index;
                app.insertLabel( "mDialog", mSelection.join() );    // to store dropDownList positions (as a string "," delimited)
                return mRes;
        } else { exit(); }
app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "TDJs");
function main(){
var myObject;
var myCheckSelection = false;
if(app.documents.length > 0){
if(app.selection.length > 0){
   switch(app.selection[0].constructor.name){
    case "InsertionPoint":
    case "Character":
    case "Word":
    case "TextStyleRange":
    case "Line":
    case "Paragraph":
    case "TextColumn":
    case "Text":
    case "Cell":
    case "Column":
    case "Row":
    case "Table":
mySelected = app.insertLabel( "mDialog", String(mySelection.selectedIndex) );     //     to remember selection’s set
if(app.selection && app.selection[0].hasOwnProperty ("tedious_works") );
      tedious_works();
else{
alert("Wrong selection. Please try again.");
function tedious_works() {
app.findGrepPreferences = app.changeGrepPreferences = null;
switch (mySelection.selectedIndex){
       case 1: {
   app.findGrepPreferences.findWhat = "^\\d";
   app.changeGrepPreferences.position = 1936749411;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
            break;
       case 2:{
   app.findGrepPreferences.findWhat = "(?i)\$note.+\$$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "（附[註注].+）$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 3:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<a";
   app.changeGrepPreferences.changeTo = "A";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<b";
   app.changeGrepPreferences.changeTo = "B";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<c";
   app.changeGrepPreferences.changeTo = "C";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<d";
   app.changeGrepPreferences.changeTo = "D";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<e";
   app.changeGrepPreferences.changeTo = "E";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<f";
   app.changeGrepPreferences.changeTo = "F";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<g";
   app.changeGrepPreferences.changeTo = "G";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<h";
   app.changeGrepPreferences.changeTo = "H";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<i";
   app.changeGrepPreferences.changeTo = "I";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<j";
   app.changeGrepPreferences.changeTo = "J";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<k";
   app.changeGrepPreferences.changeTo = "K";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<l";
   app.changeGrepPreferences.changeTo = "L";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<m";
   app.changeGrepPreferences.changeTo = "M";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<n";
   app.changeGrepPreferences.changeTo = "N";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<o";
   app.changeGrepPreferences.changeTo = "O";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<p";
   app.changeGrepPreferences.changeTo = "P";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<q";
   app.changeGrepPreferences.changeTo = "Q";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<r";
   app.changeGrepPreferences.changeTo = "R";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<(?<!’)s";
   app.changeGrepPreferences.changeTo = "S";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<t";
   app.changeGrepPreferences.changeTo = "T";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<u";
   app.changeGrepPreferences.changeTo = "U";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<v";
   app.changeGrepPreferences.changeTo = "V";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<w";
   app.changeGrepPreferences.changeTo = "W";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<x";
   app.changeGrepPreferences.changeTo = "X";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<y";
   app.changeGrepPreferences.changeTo = "Y";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<z";
   app.changeGrepPreferences.changeTo = "Z";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 4:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<A";
   app.changeGrepPreferences.changeTo = "a";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<B";
   app.changeGrepPreferences.changeTo = "b";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<C";
   app.changeGrepPreferences.changeTo = "c";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<D";
   app.changeGrepPreferences.changeTo = "d";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<E";
   app.changeGrepPreferences.changeTo = "e";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<F";
   app.changeGrepPreferences.changeTo = "f";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<G";
   app.changeGrepPreferences.changeTo = "g";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<H";
   app.changeGrepPreferences.changeTo = "h";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<I";
   app.changeGrepPreferences.changeTo = "i";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<J";
   app.changeGrepPreferences.changeTo = "j";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<K";
   app.changeGrepPreferences.changeTo = "k";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<L";
   app.changeGrepPreferences.changeTo = "l";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<M";
   app.changeGrepPreferences.changeTo = "m";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<N";
   app.changeGrepPreferences.changeTo = "n";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<O";
   app.changeGrepPreferences.changeTo = "o";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;

How do I change the default paper size for printing?

I am running Firefox 3.6.3. Recently, the default paper size for printing unexpectedly changed to a user-defined size of 3.00" x 4.57". It used to be letter size (8.5 x 11). The default paper size is 8.5 x 11 for everything else. I have tried changing the size in the preferences dialog box and then clicking "default", but after I close Firefox or if Firefox opens a new window, the default size switches back to 3.00" x 4.57". Does anyone know how to fix this?
== This happened ==
Every time Firefox opened
== About 2 weeks ago

In "mine" dutch firefox 3.6.12 there is no option to change paper-size see
"about:config" Promise to be careful (and be!) Enter "print.postscript.paper_size" gives a empty screen
"paper_size" gives a few results
What about the numbers 4259872, 4784247 and what is the meaning of
paper_size, paper_size_type , paper_size_unit

Upto how much I can set maximum Heap size for jvm?

I am running application on 8GB RAM Windows 64 bits machine.
I am running out of OutOfMemory (Heap Space). I want to increase the Heap Size for my jvm.
But can anybody please tell me what is the limit by which I can set the maximum size for heap?
Thanks in Advance,
Jenish

Max allowed memory per process is 2 raised to the 64th power. What maximum memory you can set depends on the memory available
for your application. You may be able to set more than 8GB ram then it will use the swap space and it will slow down your application
performance. So try different memory size and see which one works best for your application.

How to Set the Paper Size in Smart Forms

Hi Friends,
I need to SET the Paper Size to default A4 in a smart form...and in some other case we need to set to other type 8.5 X 11...How can i set it....?

Moving this discussion to the Scanning & OCR forum.

Web pages come out tiny, I must use control + to view every page. How can I set a defult size for every page I vivit?

After upgrading to 3.6 all the web pages come out tiny. The text and the pictures. I must use the Ctrl + in order to make the web page fill my screen. What do I have to do to set a default size for every web site I visit?

■ Easiest method, if you allow firefox to tabs you used then on restarting I believe it also retains the zoom settings
* '''Tools -> Options -> General -> Startup = use current pages'''
■ There are also extensions that can be used, some allow individual sites to have individual settings. Look at the [http://support.mozilla.com/en-US/questions/772884 this thread] which also discusses related matters.
■ The best method if you need the same effest accross all sites is probably changing one of the preferences within the config files, it is discussed in the above linked thread and also in this MozzillaZine article http://kb.mozillazine.org/Layout.css.dpi

Create coustom page size for Smartforms

Dear All
How to create coustom page size for smartforms.
rgds
pramod

HI
To define a new page format, choose
Administration -> CCMS -> Print->® Spool Administration.
Choose Full Administration and then Page Formats on the Device Types tab page. On the next screen choose Change and Create or Create with Reference. Fill out the fields on the next screen.
Activating a New Page Format
Before using a new page format, you must specify it as a page format in a SAPscript form. Be careful when replacing a page format in a standard SAPscript form as the form may not necessarily fit on the new page format.
You also have to define a format and device type format for the new page format before you can use it.
Thanks and Regards
Santosh Kate

Set global font size for the whole application.

Is there a way of setting a font globally
What I mean I want to set a font size for the whole application.
Is this posable ??
Thanks Craig

After posting over 300 questions I would think you would be passed the "New to Java TechnologY" stage.
The answer for Swing applications is yes this can be done.
I don't know how to do it for AWT components.
Since you posted the question in this forum (as oppose to the Swing forum for Swing related problems), I'm assuming this is an AWT related question and therefore I can't help you.

How to set the fetch size for a ResultSet object?

Connection con = getConnection();
Statement stmt = con.createConnection();
ResultSet res = stmt.executeQuery("select * from table");
//res.setFetchSize(?);
while (res.next)
res.get....
}I do not know the number of rows .
How can I set the fetch size for the ResultSet object?
I try
res.last();
res.setFetchSize(res.getRow()/2);
res.beforeFirst();
while (res.next)
res.get....
}but it's so slow if there are 6000 rows.
How can I set the fetch size for the ResultSet object more effectible?
And what is the best number to set the fetch size?

The fetch size defaults to a standard number. It is unlikely that it will be any faster if you set it unless you only plan to read a small number of rows.
i.e. if you are going to read all the rows, you need to read all the rows no matter what.
Unless the system has set the fetch size to 1 changing it will not be faster.
Depending on the row length, reading in 6000 rows is going to take a long time. You could try using a cpu profiler to improve performance.
Do you really need to read everything in every row?

How to set the stack size for alchemy application?

Anybody know how to set the stack size for alchemy application?
If you know, please tell me how to adjust the stack size for alchemy application?

Hi,
The stack size is set as public const gstackSize in the alchemy generated code. You can see this if you build with ACHACKS_TMPS set. The default is one megabyte.
One way to change the stack size is to use llvm-dis to disassemble avm2-libc/lib/avm2-libc.l.bc, generating avm2-libc.l.ll, modify the constant, and then use llvm-as to recompile your modified library and overwrite the old one. These utilities should be in your path if alchemy is set up.

Setting A4 Paper Size for Smartform

Similar Messages

Maybe you are looking for