Setting classpath not working in java control panelr of jre1.5

-Dawt.toolkit=ttt.util.ProxyToolkit -cp ; ;C:\TTTHTML\TestingTool\tttruntime_v1.2.jar;
when I place above path in java control pannel as runtime parameters
browser is crashing in java 1.5 but in java 1.4 its working fine.
Another observation i have made is that runtime parameters your specifiying in java control panel if there not there in the specfied location
in java 1.4 version browser crashes but in java 1.5 it wont crash.
You can give garbage parameters browser wont crash in jre1.5 where as in jre1.4 browser will crash

Blah. It seems absurd that it doesn't work, but I've spent several hours at it and have gotten no further.
For now I'm just resigned to the fact that I won't be able to have HTML in the JTextPane if I also want components.
No one has any ideas?

Similar Messages

Dynamic rooting (User Record) setting is not working in Nakisa OrgChart SP3

Dear All
The Dynamic rooting setting is not working in the Nakisa OrgChart SP3.
It is giving an error message - "Cannot find the root of your orgchart. The orgchart box may have been deleted or incorrectly specified, or no valid org structure can be found for the selected effective date. Please change the root of the chart or select another effective date."
We followed the same steps as given in the Admin guide of SP3 (P.no. 109 - shown below)
In Orgchart --> General Settings:
* Select the Org chart root value source.
User Record: Retrieves the record specified in the next step from the employee data element.
*Do one of the following to define the org chart root:
If User Record was selected in the previous step, select the field containing the ID of the required organizational object in the employee data element from the User record field drop-down list. For example, if you wish to root the org chart at the org unit of the logged-in user, select the field containing the org unit ID. Hence, we have selected the Org unit ID.
Note:
We had enabled single sign-on with logon tickets
Retained the standard settings in Security Settings --> Employee Source
Had provided full authorization to the roles
If we use the "OrgChart Root" option available in 'Orgchart root value source', the org structure gets displayed correctly from the root object defined.
As this is an standard functionality, Kindly guide us in resolving the issue.
Regards
Ravindra

Ravindra.
You don't have to and shouldn't always include the username and password parameters for the SAP Connection string. When you omit them it will use the user's login credentials.
Remember though that:
The SAPRoleMappingConnection will need them included in order to get the details for the user in the first place.
Without the username and password specified in a connection string you can't click the option to test the connection and result in a successful connection. Remember unable to connect does not necessarily equate to wrongly configured.
I've filtered the log file for errors and the following entries were flagged up:
26 Jun 2012 10:00:06 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:13:52 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 13:43:49 ERROR com.nakisa.Logger - java.lang.reflect.InvocationTargetException
26 Jun 2012 13:55:09 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 14:32:03 ERROR com.nakisa.Logger - com.nakisa.framework.utility.Files : deleteFile : java.io.IOException: Unable to delete file: E:\usr\sap\D15\J00\j2ee\cluster\apps\Nakisa\OrgChart\servlet_jsp\OrgChart\root\.system\Admin_Config\__000__THY_SAP_Live_RFC_01\AppResources\attr.txt
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:44 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:48 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : The dataelement ( SAPPositionVacancyDataElement ) is not defined.
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - BAPI_SAP_OTFProcessor_LinkedDataElement : while trying to invoke the method com.nakisa.framework.data.Command.getType() of an object loaded from local variable 'p_cmd'
26 Jun 2012 15:47:55 ERROR com.nakisa.Logger - com.nakisa.framework.webelement.charting.data.ChartingData : createNodesFromData : Notes Error: NullPointerException
At the very least it looks like SAPPositionVacancyDataElement is missing and whilst the other errors around it are unfamiliar I wonder if it might be a good first step to see if you can track down the reference to and existence of this data element? That being said it looks like your last test occurred well over an hour after this (so you may have already resolved it) and resulted in nothing but information messages. If that is the case it might be worth "rolling" your log file or manually trimming it to the right time frame when posting it? Otherwise it can be misleading as people could flag up issues you have already resolved.
So assuming you haven't tried Luke's suggestion (which should only take a couple of minutes to do) I think you should go back and do so right away .
Regards,
Stephen.

Applets not working with Java 1.7.0_51 in MII 14.0 SP4 Patch 5

Hi,
I'm currently evaluating the migration of our MII 12.0 developments to MII 14.
But I'm running in several issues just trying to use simple things like a SQL query template with an iGrid Display template in test mode.
Used versions are: MII 14.0 SP4 Patch 5 and on client side the latest Mozilla Firefox with Java 1.7.0_51
At first I always get a java security warning when the applet is being loaded about unsigned applications.
At second the applet itself is not running. It always shows "No data available" and the java console shows the following errors (iResult is the id of the applet):
iResult [ERROR] - Couldn't set query template: No Query Defined
iResult [ERROR] - Couldn't set display template: null
iResult [ERROR] - Couldn't set display template: null
Is this perhaps a general problem, that the MII applets are not working with Java 1.7.x versions?
If I call the same MII page from a client with Java 1.6.x it is working without errors.
Do you have some suggestions for me?
Regards Timo

please clear your JAVA Cache. that should solve the JRE issue. thanks

How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , a white window appears .

How do i make a tab active and make it stay that way always. If i put a website in my home page in order for the tabs to open automatically in that same homepage , this setting is not working, every time I open a tab , the window appears white .

By default Firefox opens a blank page for a new Tab, there is no setting to change that action without installing an add-on.
New Tab Homepage extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/777

The ringer setting is not working on my iPhone 4s

My iPhone fell into my pond for less than 10 secs. I pulled it out in time to dry it off and shake some of the water out. I made sure the screen was still working and sounds were functioning then I turned it off and left it in a bag or rice for 24 hrs. The next day I took it out and it was working fine. Now suddenly today, the ringer setting is not working. When I go into settings>sounds I press on ringtone and it seems to be working. Speakers are fine and when someone calls I have no problem. I can also hear the ringtones. But when someone txts me or when I get notifications it doesn't have any sound? The alarms don't work and the sounds in apps don't work. When I put the charger in, it doesn't make a sound. It vibrates only except when someone calls me... My headphone jack seems to be working fine because I can hear everything even the text tones and sounds in apps... What should I do? How much will I have to pay to get someone at apple to fix this problem? I'm assuming there is still some moisture in the phone maybe? It was working for a week until today I'm not planing to upgade to the iPhone 5 anytime soon. Btw, the volume buttons do work it's just when I press on it, it doesn't show the bars when you press up or down... it's just blank.

If it's physically stuck it might be best to bring it into the Apple store at George Street Sydney.
Set up an appointment with the Apple store via the website http://www.apple.com/au/support/contact/

BAPI not working in Java Webdynpro

Hi,
My BAPI from SAP is working in Netweaver perfectly, but when I call the same with the equal parameters in Java webdynpro, no results.
I'm using following function: 'CVAPI_DOC_VIEW'.
Any idea why the BAPI is not working in Java Webdynpro?
Regards,
Tim

Hi Tim,
AFAIK 'CVAPI_DOC_VIEW' will work only in standard SAP Dynpro. Inside Webdynpro it is forbidden to save files in the background and using GUI class with execute, so you cannot use that Standard FM.
Check this thread .
Thanks
Katrice

HT201269 one fine day, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost conta

one fine day yesterday, my i phone just hangup lost all contact detail. The screen only show a picture depicting cable connection to iTune. I have tried to restore iphone to factory setting but not working . May i know how to proceed to recover lost contacts.

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

HT3211 My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

My tracking pad is not working. It controls itself and does not follow my finger commands. If I bring it to an apple store, would I be able to have a new pad installed?

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, take the computer to the Apple store to have it checked out
and repaired, if needed.
Best.

CLASSPATH not working !

I'm on Windows XP.
I have three jar files - the Microsoft SQL Server 2000 jar files - msbase.jar, msutil.jar and mssqlserver.jar.
I have copied them everywhere I can think of and set the CLASSPATH and even tried using the -classpath switch - I still get the error class not found.
I've copied them into the current directory, into the lib directory the lib\ex directory.
What am I doing wrong ?

I'm using the appletviewer as it's just a test applet to talk to SQL Server 2000.
Does the classpath switch work with appletviewer ?
Code is as follows
* Copyright 2003 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
* Use of this software is authorized pursuant to the terms of the license found at
* http://developer.java.sun.com/berkeley_license.html.
* This is a demonstration JDBC applet.
* It displays some simple standard output from the Coffee database.
import java.applet.Applet;
import java.awt.Graphics;
import java.util.Vector;
import java.sql.*;
public class OutputApplet extends Applet implements Runnable {
private Thread worker;
private Vector queryResults;
private String message = "Initializing";
public synchronized void start() {
     // Every time "start" is called we create a worker thread to
     // re-evaluate the database query.
     if (worker == null) {
     message = "Connecting to database";
worker = new Thread(this);
     worker.start();
* The "run" method is called from the worker thread. Notice that
* because this method is doing potentially slow databases accesses
* we avoid making it a synchronized method.
public void run() {
String url="jdbc:microsoft:sqlserver://servA:1433;DatabaseName=test";
     String query = "SELECT * FROM DBO.SHOW";
     try {
     Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
     } catch(Exception ex) {
setError("Stage #1: Can't find Database driver class: " + ex);
     return;
     try {
     Vector results = new Vector();
     Connection con = DriverManager.getConnection(url,"view", "view");
     Statement stmt = con.createStatement();
     ResultSet rs = stmt.executeQuery(query);
     while (rs.next()) {
          int rn = rs.getRow();
          String s = rs.getString(2);
          String f = rs.getString(4);
          String text = "Row: " + rn + " " + s + " - " + f + " row:" + rs.wasNull();
          results.addElement(text);
     stmt.close();
     con.close();
     setResults(results);
     } catch(SQLException ex) {
     setError("Stage2 SQLException: " + ex);
* The "paint" method is called by AWT when it wants us to
* display our current state on the screen.
public synchronized void paint(Graphics g) {
     // If there are no results available, display the current message.
     if (queryResults == null) {
     g.drawString(message, 5, 50);
     return;
     // Display the results.
     g.drawString("Horses in TNH: ", 5, 10);
     int y = 30;
     java.util.Enumeration enum = queryResults.elements();
     while (enum.hasMoreElements() && (y<200)) {
     String text = (String)enum.nextElement();
     g.drawString(text, 5, y);
     y = y + 15;
* This private method is used to record an error message for
* later display.
private synchronized void setError(String mess) {
     queryResults = null;
     message = mess;
     worker = null;
     // And ask AWT to repaint this applet.
     repaint();
* This private method is used to record the results of a query, for
* later display.
private synchronized void setResults(Vector results) {
     queryResults = results;
     worker = null;
     // And ask AWT to repaint this applet.
     repaint();

Lenovo AIO C440 - not working infrared remote control

Hello,
is there any hint how to get infrared remote control working for a new C440 model? Tomorrow I will try to measure and/or replace batteries which could be bad. For now it is totally not working.
Another question: the remote should work only within AverMedia TV app or in the whole Windows 8?
Regards,
Zdenek

hi bohdik,
Welcome to the Lenovo Forums.
The IR Windows Media Center remote control is for use with C440 models with optional TV tuner. If you have this model, make sure the TV Tuner driver and the ITE CIR Driver from the lenovo support site are installed under Device Manager (press Windows Key+R then type devmgmt.msc) then follow the Set up a TV signal in Windows Media Center. guide.
Note:
You must have Windows 8 PRO to enable Windows Media Center
See this articles in reference:
How to add Windows Media Center to Windows 8 Pro
How To Install And Set Up Media Center On Windows 8
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Last_page button is not working in table control-urgent

hi all,
iam displaying the data in table control.in my pf-status i have first_page,next_page,prev_page and last_page.out of 4 buttons 3 buttons are working finr except last_page. any body can send me the code for this program.iam sending my program below.
REPORT ZMAHI_TABLE_CONTROL .
TABLES : VBAK,VBAP.
DATA : BEGIN OF ITAB OCCURS 0,
         VBELN TYPE VBAK-VBELN,
         ERDAT TYPE VBAK-ERDAT,
         ERNAM TYPE VBAK-ERNAM,
         ERZET TYPE VBAK-ERZET,
         REASON(40) TYPE C,
       END OF ITAB.
DATA :   FILL TYPE I VALUE 1.
DATA : N TYPE I .
DATA      : BEGIN OF XVALUES OCCURS 50,
              BUTXT LIKE T001-BUTXT,
            END OF XVALUES.
DATA      : BEGIN OF XFIELDS OCCURS 50.
        INCLUDE STRUCTURE HELP_VALUE.
DATA      : END OF XFIELDS.
DATA      : BEGIN OF SEL_VAL OCCURS 50.
        INCLUDE STRUCTURE HELP_VTAB.
DATA      : END OF SEL_VAL.
TABLE CONTROL DECLARATIONS------
CONTROLS : CONTROL_DATA TYPE TABLEVIEW USING SCREEN '100'.
DATA : OK_CODE TYPE SY-UCOMM,
LIN TYPE I,
LIN1 TYPE I,
LIN2 TYPE I,
LIN3 TYPE I.
DATA: LINES TYPE I,
      LIMIT TYPE I VALUE 1.
DATA :   LINE_COUNT       TYPE I,
         LINEI            TYPE I,
         LINEJ            TYPE I,
         LINE1            TYPE I,
         LINE2            TYPE I,
         LN1              TYPE I.
SELECTION-SCREEN : BEGIN OF BLOCK B1.
SELECT-OPTIONS   : P_VBELN FOR VBAK-VBELN.
SELECTION-SCREEN : END OF BLOCK B1.
START-OF-SELECTION.
SELECT VBELN
         ERDAT
         ERNAM
         ERZET
    FROM VBAK
    INTO TABLE ITAB
WHERE VBELN IN P_VBELN.
CALL SCREEN 100.
*&      Module F4_HELP INPUT
MODULE F4_HELP INPUT.
FREE : XFIELDS,SEL_VAL,XVALUES.
MOVE : 'ZMAHI'     TO XFIELDS-TABNAME,
         'REASON'    TO XFIELDS-FIELDNAME,
         'X'        TO XFIELDS-SELECTFLAG.
APPEND XFIELDS.
XVALUES = 'Non Trade F&F'.
APPEND XVALUES .
XVALUES = 'Non Trade Retention'.
APPEND XVALUES .
XVALUES = 'Oldbills Accnt cntmnt'.
APPEND XVALUES .
XVALUES = 'Non Trade Not claimed'.
APPEND XVALUES .
XVALUES = 'Non Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Non Trade Payment Block'.
APPEND XVALUES .
XVALUES = 'N/T Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'N/T Unstld Advances'.
APPEND XVALUES .
XVALUES = 'N/T OThers'.
APPEND XVALUES .
XVALUES = 'Trade Non Receipt OF BOE'.
APPEND XVALUES .
XVALUES = 'Trade OEM Adjustments'.
APPEND XVALUES .
XVALUES = 'Trade Reject Of Material'.
APPEND XVALUES .
XVALUES = 'Trade NOt Claimed'.
APPEND XVALUES .
XVALUES = 'Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Trade Payment BLock'.
APPEND XVALUES .
XVALUES = 'Trade Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'Trade Non Submission of bills'.
APPEND XVALUES .
XVALUES = 'Trade others'.
APPEND XVALUES .
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
       EXPORTING
            CUCOL         = 0
            CUROW         = 0
            DISPLAY       = ' '
            FIELDNAME     = 'REASON'
            TABNAME       = 'ZIFIOD011'
       IMPORTING
            SELECT_VALUE = ITAB-REASON
       TABLES
            FIELDS        = XFIELDS
            SELECT_VALUES = SEL_VAL
            VALUETAB      = XVALUES.
ENDMODULE.                 " F4_HELP INPUT
*&      Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'CANCEL' OR 'EXIT' OR 'BACK'.
      LEAVE TO SCREEN 0.
   WHEN 'NEXT_LINE'.
     CONTROL_DATA-top_line = CONTROL_DATA-top_line + 1.
     limit = fill - lines + 1.
     IF CONTROL_DATA-top_line > limit.
       CONTROL_DATA-top_line = limit.
     ENDIF.
   WHEN 'PREV_LINE'.
     CONTROL_DATA-top_line = CONTROL_DATA-top_line - 1.
     IF CONTROL_DATA-top_line < 0.
       CONTROL_DATA-top_line = 0.
     ENDIF.
    WHEN 'NEXT_PAGE'.
      CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE + LINES.
      LIMIT = LIMIT + 1.
      CONTROL_DATA-TOP_LINE = LIMIT.
    WHEN 'PREV_PAGE'.
      CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE - LINES.
      LIMIT = LIMIT - 1.
      CONTROL_DATA-TOP_LINE = LIMIT.
   WHEN 'LAST_PAGE'.
     CONTROL_DATA-TOP_LINE = FILL - LINES + 1.
    WHEN 'FIRST_PAGE'.
      CONTROL_DATA-TOP_LINE = 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module SCROLL_BAR INPUT
MODULE SCROLL_BAR INPUT.
DESCRIBE TABLE ITAB LINES CONTROL_DATA-LINES.
ENDMODULE.                 " SCROLL_BAR INPUT
thanks,
maheedhar.T

Hi Ravi,
The code which u sent to me is not working for next page and previous page.
can u plz resend me the code.
iam sending my code below.
REPORT ZMAHI_TABLE_CONTROL .
TABLES : VBAK,VBAP.
DATA : BEGIN OF ITAB OCCURS 0,
         VBELN TYPE VBAK-VBELN,
         ERDAT TYPE VBAK-ERDAT,
         ERNAM TYPE VBAK-ERNAM,
         ERZET TYPE VBAK-ERZET,
         REASON(40) TYPE C,
       END OF ITAB.
DATA :   FILL TYPE I VALUE 1.
DATA : N TYPE I .
DATA      : BEGIN OF XVALUES OCCURS 50,
              BUTXT LIKE T001-BUTXT,
            END OF XVALUES.
DATA      : BEGIN OF XFIELDS OCCURS 50.
        INCLUDE STRUCTURE HELP_VALUE.
DATA      : END OF XFIELDS.
DATA      : BEGIN OF SEL_VAL OCCURS 50.
        INCLUDE STRUCTURE HELP_VTAB.
DATA      : END OF SEL_VAL.
TABLE CONTROL DECLARATIONS------
CONTROLS : CONTROL_DATA TYPE TABLEVIEW USING SCREEN '100'.
DATA : OK_CODE TYPE SY-UCOMM,
LIN TYPE I,
LIN1 TYPE I,
LIN2 TYPE I,
LIN3 TYPE I.
DATA: LINES TYPE I,
      LIMIT TYPE I VALUE 1.
DATA :   LINE_COUNT       TYPE I,
         LINEI            TYPE I,
         LINEJ            TYPE I,
         LINE1            TYPE I,
         LINE2            TYPE I,
         LN1              TYPE I.
SELECTION-SCREEN : BEGIN OF BLOCK B1.
SELECT-OPTIONS   : P_VBELN FOR VBAK-VBELN.
SELECTION-SCREEN : END OF BLOCK B1.
START-OF-SELECTION.
SELECT VBELN
         ERDAT
         ERNAM
         ERZET
    FROM VBAK
    INTO TABLE ITAB
WHERE VBELN IN P_VBELN.
CALL SCREEN 100.
*&      Module F4_HELP INPUT
MODULE F4_HELP INPUT.
FREE : XFIELDS,SEL_VAL,XVALUES.
MOVE : 'ZMAHI'     TO XFIELDS-TABNAME,
         'REASON'    TO XFIELDS-FIELDNAME,
         'X'        TO XFIELDS-SELECTFLAG.
APPEND XFIELDS.
XVALUES = 'Non Trade F&F'.
APPEND XVALUES .
XVALUES = 'Non Trade Retention'.
APPEND XVALUES .
XVALUES = 'Oldbills Accnt cntmnt'.
APPEND XVALUES .
XVALUES = 'Non Trade Not claimed'.
APPEND XVALUES .
XVALUES = 'Non Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Non Trade Payment Block'.
APPEND XVALUES .
XVALUES = 'N/T Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'N/T Unstld Advances'.
APPEND XVALUES .
XVALUES = 'N/T OThers'.
APPEND XVALUES .
XVALUES = 'Trade Non Receipt OF BOE'.
APPEND XVALUES .
XVALUES = 'Trade OEM Adjustments'.
APPEND XVALUES .
XVALUES = 'Trade Reject Of Material'.
APPEND XVALUES .
XVALUES = 'Trade NOt Claimed'.
APPEND XVALUES .
XVALUES = 'Trade Dispute'.
APPEND XVALUES .
XVALUES = 'Trade Payment BLock'.
APPEND XVALUES .
XVALUES = 'Trade Subsntly Cleared'.
APPEND XVALUES .
XVALUES = 'Trade Non Submission of bills'.
APPEND XVALUES .
XVALUES = 'Trade others'.
APPEND XVALUES .
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE_EXT'
       EXPORTING
            CUCOL         = 0
            CUROW         = 0
            DISPLAY       = ' '
            FIELDNAME     = 'REASON'
            TABNAME       = 'ZIFIOD011'
       IMPORTING
            SELECT_VALUE = ITAB-REASON
       TABLES
            FIELDS        = XFIELDS
            SELECT_VALUES = SEL_VAL
            VALUETAB      = XVALUES.
ENDMODULE.                 " F4_HELP INPUT
*&      Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'CANCEL' OR 'EXIT' OR 'BACK'.
      LEAVE TO SCREEN 0.
   WHEN 'NEXT_LINE'.
     CONTROL_DATA-top_line = CONTROL_DATA-top_line + 1.
     limit = fill - lines + 1.
     IF CONTROL_DATA-top_line > limit.
       CONTROL_DATA-top_line = limit.
     ENDIF.
   WHEN 'PREV_LINE'.
     CONTROL_DATA-top_line = CONTROL_DATA-top_line - 1.
     IF CONTROL_DATA-top_line < 0.
       CONTROL_DATA-top_line = 0.
     ENDIF.
   WHEN 'NEXT_PAGE'.
     CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE + LINES.
     LIMIT = LIMIT + 1.
     CONTROL_DATA-TOP_LINE = LIMIT.
   WHEN 'PREV_PAGE'.
     CONTROL_DATA-TOP_LINE = CONTROL_DATA-TOP_LINE - LINES.
     LIMIT = LIMIT - 1.
     CONTROL_DATA-TOP_LINE = LIMIT.
   WHEN 'LAST_PAGE'.
     DESCRIBE TABLE ITAB LINES LIMIT.
     CONTROL_DATA-TOP_LINE = LIMIT.
   WHEN 'FIRST_PAGE'.
     CONTROL_DATA-TOP_LINE = 0.
WHEN 'P--'.
CLEAR ok_code.
PERFORM paging USING 'P--'.
WHEN 'P-'.
CLEAR ok_code.
PERFORM paging USING 'P-'.
WHEN 'P+'.
CLEAR ok_code.
PERFORM paging USING 'P+'.
WHEN 'P++'.
CLEAR ok_code.
PERFORM paging USING 'P++'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module SCROLL_BAR INPUT
MODULE SCROLL_BAR INPUT.
DESCRIBE TABLE ITAB LINES CONTROL_DATA-LINES.
ENDMODULE.                 " SCROLL_BAR INPUT
*&      Form paging
      text
     -->P_0356   text
*FORM paging USING    VALUE(P_0356).
FORM paging USING code.
DATA: i TYPE i,
j TYPE i.
CASE code.
WHEN 'P--'.
CONTROL_DATA-top_line = 1.
WHEN 'P-'.
CONTROL_DATA-top_line = CONTROL_DATA-top_line - line_count.
IF CONTROL_DATA-top_line LE 0.
CONTROL_DATA-top_line = 1.
ENDIF.
WHEN 'P+'.
i = CONTROL_DATA-top_line + line_count.
j = CONTROL_DATA-lines - line_count + 1.
IF j LE 0. j = 1. ENDIF.
IF i LE j.
CONTROL_DATA-top_line = i.
ELSE.
CONTROL_DATA-top_line = j.
ENDIF.
WHEN 'P++'.
CONTROL_DATA-top_line = CONTROL_DATA-lines - line_count + 1.
IF CONTROL_DATA-top_line LE 0.
CONTROL_DATA-top_line = 1.
ENDIF.
ENDCASE.
ENDFORM. " PAGING
*ENDFORM.                    " paging
thanks,
maheedhar.t

Why does set font not work in report generation toolkit?

I would like to change font and underline when inserting text into a Microsoft Word document. I have tried using the
"Set Report Font" vi directly in front of an "Append Report Text" vi in my own application. The inserted text at the bookmark is always in the default text mode
of the document. Is this a bug?
I also tried the find and replace vi with the same result. Font will not change.
I also cannot find any examples of this usage that work. See example vi file below.
Save at C:\ or adjust the template location accordingly in the vi.
Can anyone help me out?
Thanks,
Chris
Attachments:
ChassisTestAutomatic (6.1).vi ‏39 KB
TestPlan.dot ‏34 KB

Dhubbell wrote:
That's a cool tool Ben! However, with a bookmark, you know the location on a Word Template, and if you know the location in MS Word, you can then set the fonts you want in Word.
Do you know how to change the fonts in a string?
Example, How do you insert this block of text on a SINGLE MS Word bookmark?
PART NUMBER: 1234567890
DESCRIPTION: These lines are formated dynamically, some orders may have 1 PN, and other orders many have 500 PNs.
I'm formatting my line details and inserting them on a MS Word bookmark. After the initial bookmark I have no more control of the fonts for the entire string block. I'd like to dynamically change the fonts in a string and I'd like to use MS Word. I saw HTML report writing, but, in my particular application, HTML reports will not work.
Doug
I don't have the time to try anything but as a suggestion I would experiment with the range start end properties (e.g. from start =0 to end =
12 bold is true, from 13 to 23 bold is false, ....) You first insert text without formatting then you use the range start and end to format the text.
I'm not sure it will work but it's worth a try.
Ben64
note: I would create a 2D array of start and end index of your string and auto-index a for loop that contain the range property node.

Dynamic configuration not working in Java mapping

Hi All,
I have a scenario where i am using java mapping. In this i am doing following
1)Read file name from input message header
2)set file name in output message Header
3) set Directory name in output message Header
i have used following code .. but iit is not working... when i test end to end... in reciver communication channel it is failing stating " message failed as "Directory is not set in Header. Also i checked in SXMB_MONI "dynamic configuration".It is not showing Directory.
this is code.
public void transform(TransformationInput transformationInput,TransformationOutput transformationOutput)
               throws StreamTransformationException {
               private Map para;
               String Directory ;
               String inputFileName;
               String var1 = "ABC";
               para = transformationInput.getInputHeader().getAll();
               DynamicConfiguration conf = (DynamicConfiguration) para
                         .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
               DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
                     inputFileName = conf.get(keyFileName1);
               DynamicConfigurationKey keyFilename = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "FileName");
               DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
                         .create("http://sap.com/xi/XI/System/File", "Directory");
               Directory = "tmp/"+var1;
               conf.put(keyFilename,inputFileName);
               conf.put(keyDirecory, Directory);
I am in PI 7.1 ,   and in eclipse its showing warning that Para is not used.
Can anyone show some lights.
Also is there any way to debug this?? like is there any function by which i can write the trace for each step to see those in MONI.

Method name:   public void createDirectory(Resultlist result, Container container)throws StreamTransformationException
//Use Simple UDF and do the following lines
String Directory ;
String inputFileName;
String var1 = "ABC";
DynamicConfiguration conf = container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
inputFileName = conf.get(keyFileName1);
DynamicConfigurationKey keyFilename = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey keyDirecory = DynamicConfigurationKey
               .create("http://sap.com/xi/XI/System/File", "Directory");
Directory = "tmp/"+var1;
conf.put(keyFilename,inputFileName);
conf.put(keyDirecory, Directory);
and remove these 3 lines
//private Map para;
//para = transformationInput.getInputHeader().getAll();
//DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION
>>I am in PI 7.1 , and in eclipse its showing warning that Para is not used.Can anyone show some lights.
You can simply remove declaring Map Para line... The eclipse gives warning because you dont assign values for it and you are trying to use...
For using the same input file name in output side, you dont need coding ... you need only for the directory...
Enable ASMA attributes in the channel.
Edited by: Baskar Gopal on Feb 24, 2011 10:58 AM

Auto Boxing not working in Java 6?

Hi All,
I am studying and practicing to become Java Certified and I am just using an example from the Java Certification Guide Chapter 11 Swing Components from Sybex for Java 5.
I am using Eclipse and the latest Java 6 SDK in WIndows XP.
The code below runs fine in Solaris 10 using Java 1.5.0_14-b03:
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
public class StringLengthTableModel extends AbstractTableModel {
     private String[] strings;
     public StringLengthTableModel(String[] strings) {
          this.strings = strings;
     public int getRowCount() {
          return strings.length;
     public int getColumnCount() {
          return 2;
     public Object getValueAt(int row, int col) {
          if (col == 0) {
               return strings[row];
          } else {
               return strings[row].length();
     public String getColumnName(int col) {
          return (col == 0) ? "String" : "Length";
     public static void main(String[] args) {
          JFrame frame = new JFrame();
          String[] strings = { "January", "February", "March", "April", "May",
                    "June", "July", "August", "September", "October", "November",
                    "December" };
          StringLengthTableModel model = new StringLengthTableModel(strings);
          JTable table = new JTable(model);
          frame.getContentPane().add(table);
          frame.setSize(500, 250);
          frame.setVisible(true);
However in Windows XP and using the latest Eclipse IDE and the Latest Java 6 SDK I get:
Exception in thread "AWT-EventQueue-0" java.lang.Error: Unresolved compilation problem:
     Type mismatch: cannot convert from int to Object
The questionable method line is
               return strings[row].length();
in the method
     public Object getValueAt(int row, int col) {
          if (col == 0) {
               return strings[row];
          } else {
               return strings[row].length();
Any ideas????
You would think and hope the latest release of Java like Java 6 would be backward compatible with the auto boxing and auto un boxing features that were introduced in Java 5.
Any comments, thoughts, ideas would be appreciated.
Thanks,
Carlos A. Morillo
[email protected]

CarlosMorillo wrote:
Exception in thread "AWT-EventQueue-0" java.lang.Error: Unresolved compilation problem:
     Type mismatch: cannot convert from int to ObjectGo to that line in Eclipse and look for the red squiggly line. Click on the I symbol next to it. At a guess the project is set up to work in 1.4 mode.
Also learn to love the "Problems" panel. This should not have been a runtime error.
Any ideas????Your project is in 1.4 mode. Right click on the project in the "Project Explore" window. Select properties, select "Java Compiler", check the "Enable project specific settings" and make sure the little drop downs all say "6.0".

Jdk 1.4 install - "." in Classpath not working

Hello friends,
I have installed jdk1.4. However "javac" won't compile files that include classes in the current dir:
import classname;
I keep getting error
import classname;
^ "." expected.
But the first thing in my CLASSPATH is ".;..".
I don't see why it is not working properly. The system is windows 2000, and it was set up as enviroment variable. It worked fine with jdk1.3.
Help!

Found the problem - since they are in the same dir, shouldn't include them in "import..." at all.

Setting classpath not working in java control panelr of jre1.5

Similar Messages

Maybe you are looking for