Setting comment through tuxedo oracle transaction manager
Hi
We are using tuxedo functions tx_* for managing transactions to oracle database.
Generally we can specify a comment with Oracle's commit statement which allows identification of transaction in case of issues.
My question is that how can we specify the commit comment with tx_commit() function from a tuxedo server.
Thanks
-Tariq
Tariq,
There isn't any COMMENT parameter available on the Tuxedo tx_commit() or tpcommit() call. However, you courld call the Tuxedo userlog() function just before calling tx_commit(), and this will write whatever comment you want to the Tuxedo ULOG call. When userlog() is called within a tranasction the line written to the ULOG includes 3 hexadecimal numbers representing the Tuxedo GTRID (global transaction ID.) If an error occurs during the transaction, Tuxedo may also write messages of its own to the ULOG, and these messages will also show the GTRID.
The TMTRACE environment variable can also be used to write information about the calls made during a transaction to the ULOG. For example,
export TMTRACE=*:ulog:dye
will cause information about all ATMI calls to be written to the ULOG.
Regards,
Ed
Similar Messages
-
Oracle Enterprise Manager - HTTP error: 503 Service Unavailable
Dear all,
some time ago I've upgraded Oracle Database 10g up to version 10.2.0.4.0 on a Linux system.
Now if I try to connect to HTTP Oracle Enterprise Manager interface (http://(My server name):1158/em/console/aboutApplication) I see this error into my browser: "503 Service Unavailable - Service is not initialized correctly. The Em Key is not configured properly. Run "emctl status emkey" for more details."
If I perform "emctl status dbconsole" command from command line I have this output
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
So I've tried to restart Oracle Enterprise Manager trough command line using "emctl start dbconsole":
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control .... started.
Now dbconsole seems to be running as follows
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://(My server name):1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
but my browser always shows the same above error.
If I try to perform the suggested "emctl status emkey" command trough command line I have this output:
TZ set to Europe/Vatican
Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Please enter repository password: (Here I put sysman password)
Exception caught
ORA-06550: line 1, column 13:
PLS-00201: identifier 'MGMT_TIME_SYNC.STARTUPSYNC' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00201: identifier 'MGMT_TIME_SYNC.STARTUPSYNC' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:111)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:330)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:287)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:744)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:217)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:968)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1189)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3369)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3475)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4399)
at oracle.sysman.emSDK.conf.ConfigManager.startupEmKey(ConfigManager.java:855)
at oracle.sysman.emSDK.conf.ConfigManager.statusEmKeyInRepos(ConfigManager.java:1113)
at oracle.sysman.eml.sec.rep.EmKeyUtil.statusEmKey(EmKeyUtil.java:273)
at oracle.sysman.eml.sec.rep.EmKeyUtil.main(EmKeyUtil.java:583)
I've done no changes on Linux operating system side.
Could somebody help me, please?
Thanks for help and regards.
DragonsLordKERNEL
Edited by: DragonsLordKERNEL on 17-nov-2008 11.06Check if your emkey file is still under $ORACLE_HOME/sysman/config/emkey.ora
Also check Oracle doc,
http://download.oracle.com/docs/cd/B19306_01/em.102/b40002/security2.htm#BABJGGIG
consider remove the recreate emkey if it doesn't work out. -
Can not stop cleanly Oracle Enterprise Manager 10g
Hi,
i can not stop cleanly the OEM (Oracle 10.2.0.1.0) on my Debian 3.1.
saturn:~# su - oracle -c "/u01/app/oracle/product/10.2.0/db_1/bin/emctl stop dbconsole"
TZ set to Europe/Berlin
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://saturn:1158/em/console/aboutApplication
Stopping Oracle Enterprise Manager 10g Database Control ...
--- Failed to shutdown DBConsole Gracefully ---
failed.
When i look into the processlist i see the running agent :-(
oracle 25434 0.0 0.3 70188 14296 ? S Nov29 0:31 /u01/app/oracle/product/10.2.0/db_1/bin/emagent
Any ideas to stop the OEM-Agent Console cleanly, without hard kill the process?
Thanks!
BlueI have read there is a bug in EM-Konsole, i help me with the kill commands:
killall emagent
killall perl
killall java
Sorry, thats not a fine solution, but it works.
Blue -
-Inquiry on how to set login credentials for Oracle management server?
Dear All
I am on my Oracle Enterprise Manager console. Can you please let me know how can I set its login credentials so other users can login to it via network?
Thank youThank you very much. I found my super administrator credentials set as 'SYSMAN/oem_temp' and it got through.
-
Please provide the patch set for Oracle Enterprise Manager Grid Control 10
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com -
Unable to copy Transaction in Oracle recievales manager
Ebs 12.1.3
oracle receivables manager
steps to reproduce the problem
receivables manager>transactions>copy transaction
after querying the transaction number in the schedule section
number of days and first gl date gives error
ERROR
An Unexpected Error-1403 has occurred. An alert has been sent to the system administrator.
ORA-01403: no data found
I compiled all the ar forms and compile apps schema
there are 32 invalid objects out of which not a single belongs to apps schema
Thankz
ApPSMAStI
SHARInG IS CArInGyeah there are some error in Apache log file the error are regarding java files
[Sun Oct 2 sometime] [error] [client address]
[ecid: 1317514466:xx.xx.xx.xx:10355:0:217,0] File does not exist:/apps/apps_st/comn/java/classes/
[Sun Oct 2 sometime] [error] [client address]
[ecid: 1317514466:xx.xx.xx.xx:10355:0:218,0] File does not exist: /apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
and the rest of the files are
any workaround
Thanks
AppsMAstI
SHariNG
IS
CArInG -
In the Media pack Readme for parts required to be downloaded for different EPM products, Essbase has Oracle Identity Management 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) listed. Can someone please tell me if this is a must have. If not under what conditions does one need to have this?
Thanks,
Ted.It is not a must have, if you don't know what OIM is then you probably dont need it :)
Cheers
John
http://john-goodwin.blogspot.com/ -
Oracle Process Manager gone after applying patch set 10.1.3.4.0
Hi everyone,
I downloaded the patch set 10.1.3.4.0 from [http://www.oracle.com/technology/software/products/ias/htdocs/101310.html] and intalled it on my machine but after the installation finished, I found problem in runing Oracle Process Manaer Console. When I try to login, it redirects to DomainPickup.jsp and after entering oc4jadmin id and password below message appears: No domains accessible to the user logged in.
When I click on Goto BPEL Admin and try to create a new domain, it does not accept "default" as domain id: it says "Domain already exists." when I give different name, it shows this error:
Exception
Operation failed because:
Domain creation error.
An exception occurred while attempting to create the domain "sample" at path "c:\oracle10gR1\product\10.1.3.1\OracleAS_1\bpel\domains\sample". The exception reported is:
I was using SOA suite 10.1.3.0 and it was working properly before upgrade. Now, I can see the version of BPEL Console has changed to 10.1.3.4.0 and still I can login to Enterprise Manager and ESB conole properly but I missed BPEL Console somehow.
I ran the setup from patch set and selected the Oracle Home for my soa suite 10.1.3.0 and continue the rest of installation. I don't know where I did mistake.
I will appeciate if someone can help me to fix this problem. I could not found any note for applying this patch on download page too.
Thanks
EsfandThis forum is for 11g. Try asking your question on the SOA Suite forum here
SOA Suite
Heidi. -
Oracle configuration manager proxy setting
Hello,
I m trying to install Agent speratly using this file
"Linux_Grid_Control_agent_download_10_2_0_2_0"
after unzip and using runninstaller......
but durring asking the configuration it ask for the
"oracle configuration manager proxy setting"
even it is opptional and i hav not checked it .... it is not going next.
i dont want to configure it (but when i give values proxy ip and port, not accept it).
plz solve this issue
Thanx.Whats error it throw on pressing next
please paste the install action log -
Oracle Enterprise Manager through OWB
Hi ,
Hw can I invoke Oracle Enterprise Manager, I have to do this for scheduling the jobs in OWB.
Right Now I am going thru Start > Programs > Oracle - OUHome1 > Enterprise Manager console where I am not able to see a tab for 'JOB' which can be used to schedule the OWB jobs?Start > Programs > Oracle - OUHome1 > Enterprise Manager consolethat is EM console
go through the below link to start OEM.
http://www.oracle.com/technology/obe/2day_dba/gettingstarted/gettingstarted.htm#t1 -
Problem in setting up Oracle Approvals Management (AME)
Hi Friends,
I Receive an error message of "No rules are applicable to this transaction" during AME testing of
a real transaction for the Payables invoice approval process.
### Responsibility name and request ID ###
Approvals Management Business Analyst
### Responsibility and navigational paths to reproduce ###
1. implement Oracle Approvals Management.
2. Implement workflow for Payables invoice approval.
3. Perform real transaction test case in AME.
Thanks a lotHi again...
I already applied patch AME.B RUP 2 but still the same error encountered :(
=================================
Approvals Management Reporting Utility Support Tool
Doc ID: Note:287255.1
=================================
Based on the above, I tried to generate a report utility for AME.
the value returned by step is 'Post-AME.B'I want to do the ff:
1. Login to AME Application using "Approvals Management Administrator" responsibility.
2. Search for your transaction type
3. Click on the transaction type
4. AME-Internal ID of the choosen transaction type will be displayed.
Note: Please note that the AME Internal ID (Application ID) is usually a negative integer.
Make a note of the AME Internal ID
How do I get the AME-Internal ID ? based on the page below:
http://rapidshare.com/files/174201557/AME2.JPG.html
Thanks a lot -
Comments through service manager portal
Hi all,
I have the requirement to send out a notification if a user adds comments to a task they have logged though the portal which has not already been allocated to an analyst. We already have notifications
set up for allocated tasks but are struggling to set up ones for unallocated ones. <o:p></o:p>
Any help would be much appreciated
Many Thanks!The notification will go to an inbox that is monitored by the service desk. The reason I have been asked to set this up is because users are chasing up tasks that are yet to be assigned by adding
a comment through the portal. These comments are going unnoticed until the task is picked up by an analyst (not great customer service)<o:p></o:p> -
Unlocking the AD account through Oracle Identity Manager 9.1.0.2
Hi friends,
I have a question about Oracle Identity Manager 9.1.0.2, I have configured the Active Directory connector for Identity Manager, you can perform the unlock process when the account was blocked by Active Directory failed attempts at authentication to a workstation .
Very grateful for your supportHello,
As Sagar suggested, you could -
(1) write a task "Unlock AD account" - write code to unlock an user account in AD. Check if any such task is existing in the connector. You might be able to reuse it. If not, write your own task for this purpose.
(2) Based on your implementation, choose "Changed Password" or "Password Updated" task in your process definition. And on success of this task, add "unlock AD account" task to invoke.
(3) "self-management account unlock" will work automatically as soon as a user will reset his password. You don't have to implement anything else here.
That's it !!!
Hope this helps, -
Forte Transaction Management & 2PC
Forte Transaction Management & 2PC
The main purpose of 2PC in a distributed transaction manager is
to enable recovery from a failure that occurs during the window
of transaction commit processing. The Forte transaction manager was built
with this in mind but only with respect to the "volatile" (or "in memory")
objects that Forte manages. What this implies is that because Forte stores
objects in memory and not persistently on disk, the requirement of recovery
for these objects is significantly reduced (if not eliminated all together).
Forte follows a distributed 2PC model in that tasks and messages carry
along with them transaction identification and, during commit processing,
every distributed participant is polled for its availability to commit
the transaction. Applications saving persistent data to disk during a
distributed Forte transaction need to concern themselves with the potential
for failure during the commit processing window. Forte's prepare phase polls
each site (confirming a communications link with each distributed participant)
but no prepare request goes to the database primarily because (in release 1 and
2 of forte) no database supported a general distributed two-phase commit
(one could take issue with that in the case of Sybase, but rather than debate
this point, suffice it to say that the general direction in the industry for
support of this functionality was through TP monitors -- more on that later).
Once all sites are ready to commit Forte expects that the commit will
complete successfully. If at this moment, for example, a participating
Sybase server terminates (with data not yet committed) while a participating
Oracle server has already committed its unit of work, then the outcome of
the distributed transaction is inconsistent - if no one has yet committed
Forte will still abort the transaction. This "window of inconsistency"
is documented in the Forte TOOL manual.
Mission critical applications that require distributed transactions can
address this window of inconsistency in a number of ways:
* Utilize a TP monitor such as Encina (see below)
* Log distributed updates in an auxiliary database table (much like a
distributed transaction monitor's transaction-state log). This approach has
been the traditional banking application solution prior to the commercial
availability of products like Encina, Tuxedo, TopEnd, etc.
This solution is somewhat complex and is usually not generic enough
so as not to have to change code every time a new table or database
site is introduced into the application's data model.
* Rearrange the data model in order to eliminate the need for distributed
transactions. This is usually only a temporary solution (with smaller
numbers of active clients) and cannot be applied to complex legacy systems.
With the advent of the X/Open distributed transaction architecture (the
XA Interface) more database vendors have found that by complying with the
XA interface they can plug their database-specific implementation of
transaction into a globally managed transaction, with commit and abort
processing being conducted by a central coordinator. Of course, the
overall transaction manager coordinating the global transaction must
itself, persistently record the state of the different distributed
branches participating in the transaction. A significant portion of
the functionality provided by products such as Encina, Tuxedo, TopEnd and
OpenTP1 is to provide exactly this global transaction management.
Rather than extend the Forte distributed transaction manager with the
functionality necessary to manage and recover distributed transactions
that modify data on disk, Forte has chosen to integrate with the emerging
set of commercial transaction monitors and managers. This decision was
built into the original design of the Forte transaction model (using XA and
early Tuxedo white-papers as guidelines):
* In Forte release 2 an integration with Encina was delivered.
* In January 1997 a press release announced an integration of
OpenTP1 with Forte for release 3.
* The Forte engineering staff is currently investing integration
with other transaction management products as well.
Neil Goodman,
Forte Development.You don't. ("manage" a transaction)
There is nothing really to "manage".
A transaction is automatically started when you make any changes to data (e.g. fire off a DML statement).
You simply needs to issue a COMMIT or ROLLBACK when needed. A COMMIT at the end of the business transaction and not before (i.e. no committing every n number of rows). A ROLLBACK when hitting an exception or business logic error that requires the uncommitted changes to be undone.
That in a nutshell is it. It is that simple.
Oracle also supports creating savepoints and rolling back only some changes made thus far in the transaction.
The only other thing to keep in mind that a DDL in Oracle issues an implicit commit. Firing off a DDL with cause any exiting uncommitted transaction to be committed.
Transaction "logic/management" should not be made more complex than this. -
Oracle Enterprise Manager 10gR4 is Released
Here is the press release. Material is already posted on OTN. Enjoy!
Oracle(R) Enterprise Manager Delivers Unique New Capabilities for Top-Down Application Management
Tuesday November 13, 8:15 am ET
New Capabilities Address Cross-Tier Performance Diagnostics, Integrated Incident and Problem Management and Application Data Sharing
ORACLE OPENWORLD, SAN FRANCISCO, Nov. 13 /PRNewswire-FirstCall/ -- Building upon its "top-down" approach to managing application and Information Technology (IT) infrastructure resources, Oracle today announced key new enhancements to Oracle® Enterprise Manager 10g. The new enhancements deliver a broad range of capabilities, across the application lifecycle, for custom and SOA-based applications and pre-packaged applications and include faster performance diagnostics for production applications; simplified incident and problem management through integration with Oracle's Siebel CRM HelpDesk and PeopleSoft Enterprise HelpDesk applications; expanded capabilities to manage Oracle Business Intelligence; and easy and secure data sharing across the application lifecycle.
Oracle's top-down approach to application management uniquely addresses the need for an end-to-end application perspective -- whether technology-focused or business-focused -- while enabling administrators to virtually eliminate the confusion caused by low-level system alerts that cannot be easily correlated to business exceptions. This has been a common and costly shortfall in traditional systems management software and frequently contributes to prolonged application downtime.
"Helping customers drive better business results is the essence of Oracle's top-down approach to application management," said Richard Sarwal, senior vice president of Systems Management Products, Oracle. "With the addition of Connectors enabling closed-loop incident and problem tracking with Siebel CRM and PeopleSoft Enterprise HelpDesk applications and breakthrough application performance management capabilities using Oracle Enterprise Manager's Application Diagnostics for Java feature, Oracle takes another significant step in fulfilling our top-down application management strategy."
"With this new release, Oracle is expanding both the breadth and depth of the application management capabilities available through Oracle Enterprise Manager, providing features designed for detailed diagnosis of Java application performance issues in production environments, with the ability to trace transactions between Java application servers and database sessions," according to Tim Grieser, Program Vice President, Enterprise System Management Software, IDC
Taking Application Performance Management to the Next Level
The new Oracle Application Diagnostics for Java capability in Oracle Enterprise Manager can monitor and diagnose performance problems in production Java applications with minimal impact on application performance and availability. Unlike most Java performance management tools that utilize bytecode instrumentation, Oracle Enterprise Manager's new feature has a highly innovative diagnostics engine that introduces less than one percent performance overhead on production applications and does not require IT operations to have a deep understanding of the application logic. The new feature also has a hot-pluggable architecture that enables the diagnostics engine to be deployed in heterogeneous middleware environments, without shutting down the application server. Oracle Application Diagnostics for Java is included in the Oracle Application Server Diagnostics Pack and the new Oracle Diagnostics Pack for Non-Oracle Middleware.
Improving Performance Diagnostics Across Application Tiers
Diagnosing end user performance problems has become increasingly difficult because of the increased deployment of multi-tiered web applications and the dynamic nature of web-based applications. With Oracle Application Diagnostics for Java, administrators now have powerful diagnostic capabilities by enabling application administrators to trace in-flight transactions and correlate user request activities in the Java application to corresponding activity in the database. Similarly, database administrators can quickly identify Java applications that may be causing resource contention in the database. This cross-tier diagnostics helps accelerate problem resolution by identification of resource bottlenecks across tiers.
Tighter Integration for Siebel CRM Diagnostics and Oracle Enterprise Manager
Siebel CRM diagnostic capabilities have been integrated with Oracle Enterprise Manager, providing a single integrated tool for problem diagnostics in Siebel CRM and its underlying infrastructure. Siebel CRM administrators can use Oracle Enterprise Manager for end-to-end management of Siebel CRM and to simplify Siebel CRM diagnostics based on user and server performance analysis. In addition, Siebel CRM customers can benefit from broader application support including Siebel CRM 8.0, 7.8 and 7.7.
Enhancing Management Capabilities Across the Application Lifecycle
New Management Connectors for Siebel CRM HelpDesk and Peoplesoft Enterprise HelpDesk applications allow the deployment of end-to-end IT incident and problem management solutions capable of unprecedented levels of automation and closed-loop remediation. The connectors enable Siebel CRM and PeopleSoft Enterprise HelpDesk customers to benefit from an integrated solution that spans the service lifecycle from incident logging and tracking to top-down management of applications including problem management, patching and provisioning across the technology stack. The bi-directional integration between Oracle Enterprise Manager and Siebel CRM and PeopleSoft Enterprise HelpDesk applications helps streamline key support processes by automatically creating service requests for incidents captured in Oracle Enterprise Manager. Support analysts using these help desk products are automatically empowered with respective corrective actions to accelerate problem resolution.
Expanded Capabilities for Business Intelligence Management
Oracle Management Pack for Business Intelligence is a new Oracle Enterprise Manager pack that extends the benefits of top-down application management to Oracle Business Intelligence Enterprise Edition Plus. Using the BI management pack, customers can receive proactive alerts on impending problems, troubleshoot and tune performance problems, manage configurations, proactively enforce configuration policies, and enforce service level agreements on Oracle Business Intelligence Enterprise Edition Plus deployments.
Easy and Secure Data Sharing Across the Application Lifecycle
Also new is the Oracle Data Masking Pack, to protect sensitive production data by using masking rules to replace confidential or sensitive production information with realistic but scrubbed data. This pack provides a scalable, secure solution for application data sharing for a wide variety of needs ranging from application development, testing, quality assurance as well as business processing. See related news release dated today.
Availability and Pricing
The enhancements listed above are generally available today with Oracle Enterprise Manager 10g Release 4.
Oracle Application Server Diagnostics Pack and Oracle Diagnostics Pack for Non-Oracle Middleware are priced at $6,000 each per CPU. Management Connectors are priced at $5,000. The Oracle Management Pack for Business Intelligence is priced at $10,000 per CPU. The Oracle Data Masking Pack is priced at $10,000 per CPU of the server where data is being masked.
For more information about Oracle Enterprise Manager 10g Release 4 and the family of Plug-ins, Connectors and Management Packs and to download free evaluation software go to: http://www.oracle.com/enterprisemanager/. Terms, conditions and restrictions apply.
About Oracle Enterprise Manager 10g
Spanning applications, middleware, and database management, Oracle Enterprise Manager 10g delivers integrated enterprise management for Oracle and non-Oracle systems to more than 21,000 Management Pack customers worldwide. Employing a unique "top-down" approach to managing application and IT infrastructure resources, Oracle Enterprise Manager allows customers to focus on what matters for its business -- greater agility, better service quality and lower operational costs. With a broad set of administration, configuration management, provisioning, end-to-end monitoring, service level management, and security capabilities, Oracle Enterprise Manager 10g helps customers manage service levels, proactively isolate business exceptions before they become emergencies, and remediate issues at any level spanning application and heterogeneous infrastructure -- all within one management solution. Learn more at http://www.oracle.com/enterprisemanager/.
About Oracle
Oracle (Nasdaq: ORCL - News) is the world's largest enterprise software company. For more information about Oracle, visit our Web site at http://www.oracle.com.
Trademarks
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
This announcement is provided to you solely for information purposes, is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. Many factors can materially affect Oracle's product development plans and the nature and timing of future product releases. The development, release, and timing of any features or functionality described remains at the sole discretion of Oracle. This information may not be incorporated into any contractual agreement with Oracle or its subsidiaries or affiliates. Oracle specifically disclaims any liability with respect to this information.
Message was edited by:
Chung WuThis is expected behavious. It is because Enterprise Manager cannot run with the new server name. You can either go through loads to change the config files or simply drop and recreate the console.
Maybe you are looking for
-
Hello, I got a new bb curve a month ago and I never sent messages since cause I didn't need to. But the other day, my friend sent me a picture but I never received it. Afterwards, I tried to send her a picture but it didn't work either. So I checked
-
Hi I am using JH2.0 with JDK 1.4.1. JavaHelp mostly works, but I am having a few problems that I cannot find answers for in the forum or documentation. 1. On first use of context-sensitive help, the help viewer opens at the default page, not the requ
-
Photos not appearing in apps outside iPhoto
I recently added 2 new events in iPhoto and everything looks fine in iPhoto. The problem is that the 2 new events and the photos/videos inside those 2 events do not appear in iMovie. iMovie sees everything but the 2 most recent events. I have rebuilt
-
I am using the OSMF framework for developing my own video player... I need to know that can I ad a functionality by which I can skip the Pre Roll Advertisement Video only after a certain duration... say 30 seconds? eagerly waiting for your suggestion
-
Logon balancing error:cannot connect to message server (rc=9)
Hi Gurus, I have just installed SAP GUI 710 in my new system and copied the saplogon.ini file to the respective folder in the new system. I am now able to see the servers in the logon pad but not able to login . When i try clicking the logon i am get