Setting Folder Pane in Screen Painter
Hi All,
I have a question about setting a value of pane - folder's property. When I set this property in Screen Painter and choose form preview form's pane level changes, but when I save this form in xml file and load in my add on I have to add code that changes pane level after clicking on folder. Also SAPbouiCOM doesn't contain such property like Pane. What is this property for? Why it works in SP and doesn't when load from xml? Is this just for Screen Painter?
Regards
Szymon
Form.PaneLevel is a property for form and it changes form panelevel.
I think that comparable property for for Folder.Pane (in Screen Painter) would be val off and val on.
The most important thing for me was to be sure that I have to handle changing of panelevel by myself. I thought that maybe this property wasn't handle by SAP SDK correctly.
Regards
Szymon
Similar Messages
-
Folder Creation by Screen Painter
Hi All,
I created a form through Screen Painter which contains 5 folder. I set Pane =1,Pane=2 etc in all five folder and set from Pane and To pane for each Item as 1:1, 2:2 etc.In the Preview mode it shows all item in the corresponding folder. When I run the same form in Debug mode, Sometime it shows only folder not its items. To view items in the folder, i have to open .srf form in screen painter and re run it in debug mode.
Please suggest me a solution.
Thanks in advance,
BBNHi
Try setting the form PaneLevel in Code like this
If pVal.Before_Action = True Then
Select Case pVal.EventType
Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
Case "Folder1"
oForm.PaneLevel = 1
Case "Folder2"
oForm.PaneLevel = 2
End Select
End Select
End If
hope it helps -
Problem with Folder created in Screen painter
Hello,All
I created six folder for UD screen with screen painter and i set pane level properties correctly. While running with screen painter we can see each and every item with respect to folder
But the problem is while loading this user defined form in SAP B1 items related with folder is not coming. (Not at all coming any item under any folder) if will run same screen in screen painter items correctly.
is der any coding is required for foder creation and manage
By
Firos.CHi Firoz,
You need to set a PaneLevel for each and every pane and that pane level is what you need to set as the From Pane and To Pane for the individual items within that corresponding pane.
Say, you have a pane with PaneLevel = 3, then, for all the items within that pane, you need to have the from and to pane as 3.
Hope this helps,
Best Regards,
Satish. B. -
How to set default values on the screen painter parameters?
Hello ABAP Gurus,
I would just want to ask how to set default values on the screen painter parameters.
Thank you for your replies.Hi,
To set default values for screen painter parameters initialize the field names with default values in the PBO module....
say u have the field name as f_field1....
in the PBO of that screen initialize it....
f_field1 = '100' "here 100 is the default value.
<b>reward points if useful.</b>
regards,
Vinod Samuel. -
Can I set the subject line to wrap around in folder pane? If so, how?
I have my view set to Vertical - Folder pane and Preview pane side-by-side. I like to be able to display more of the subject in folder pane without enlarging the folder pane's width of reducing the width of the preview pane. Is it possible to make the columns in folder pane to wrap the information into two/three lines? If so, how do I do it? I have looked at each and every option but haven't been able to find any setting to do this. I have, also, checked the add-ons but haven't found anything.
Welcome to the Apple Community Dylan.
There is no way to set up home sharing on the Apple TV without the original remote from Apple, you will need to purchase a new remote from the Apple Store.
If you already have homesharing set up on the Apple TV, you merely need to set it up in the remote app settings. -
Screen Painter Image Button cannot set relative path
Hi,
I am using screen painter to create a UI form and i put image into each button. The form can run properly in my PC due to the image path is under my local path. However, the button is gone when i install the UI form in other PC. When using button object in screen painter and it not allow me to set the relative path. Anyone can help??
Cheers,
AnnaHi Gianluigi,
Thanks for your reply. However, i did try to rename the .srf file to .xml file and change the path to the following
<b><specific image=".\test3.jpg" /></b>
But the program didn't work. But if i change it to <b><specific image="c:\test3.jpg" /></b>, give it the exact path then the program work again.
Do you have any idea on it?
Anna -
Design Folder in Screen Painter
Hello,
Where can I find information on Design Folder in Screen Painter?
Because the information on the help is very basic.
Best Regards,
Jose.Hello David,
I have fallowed all the instructions you give me, but i keep having problems.
The first think am doing is make an event from a menu, that loads the application, after these I need to assign the event to the form. I have replicated every step from the sample ComplexForm. I have added the events, the one from the menu and the one for the form in the same class. I dont know if this is how I should do it, or I should follow another step?
Private Sub SBO_Application_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean) Handles SBO_Application.MenuEvent
If (pVal.MenuUID = "Mymenu") And (pVal.BeforeAction = False) Then
//Here call the form but no function
CodigoForm()
End If
End Sub
Regards,
Jose -
Finding / Setting the Pane Level of a new folder
I have added a new folder to the Business partner form but cannot seem to work out what the Pane Level is for the new folder - how do you do this ?
The folder is showing but I cannot set the pane level or add items to it.
I followed the SDK sample which uses a pane level of 5 for the Order Form but I cannot see where it is set.
ThanksOk,
I admit my stupidity here - Panes are a virtual item that you put items on and view in conjunction with clicking a form header .
Fixed my own problem again. -
How to Set Default Value of Dropdown Menu on Screen Painter
Hi,
I have 2 dropsdown menu, the first one's dropdown values are taken as defined (input1 TYPE bcont-type). The second dropdown values are defined using FM vrm_set_values. How do I set the default value for both dropdown in screen painter?Hi,
Try this
PARAMETERS: P_EBELN TYPE EKKO-EBELN MODIF ID S1 AS LISTBOX VISIBLE
LENGTH 20.
ID = 'P_EBELN'.
VALUE-KEY = 1.
VALUE-TEXT = 'Hi'.
APPEND VALUE TO T_DROP.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = ID
values = T_DROP
EXCEPTIONS
ID_ILLEGAL_NAME = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE T_DROP INTO WA_DROP INDEX 1.
P_EBELN = WA_DROP-TEXT. -
How to set Function Code for Radion Buttons in Screen painter
Hi,
I have faced problem of grouping 3 radio buttons in screen painter (no graphical editor). How to do it?
I have checked similiar threads in SDN, but those are for graphical editor.
Radio Buttons in custom screeen
http://****************/Tutorials/ABAP/Checkbox/page1.htm
http://****************/Tutorials/ABAP/Checkbox/page2.htm
Regards,
SukhboldHi,
U want to create radio button in the selection screen then u can create like this
PARAMETERS : c1 AS CHECKBOX USER-COMMAND cd,
r1 RADIOBUTTON GROUP rad,
r2 RADIOBUTTON GROUP rad.
AT SELECTION-SCREEN OUTPUT.
IF c1 = 'X'.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '0'.
screen-active = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-name = 'R1'.
screen-input = '1'.
screen-active = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Thanks, -
Setting values in Drop down list in Screen Painter
Hello Freinds,
I have the requirement as, I have drop down list in screen painter and want to fill the values in that list using database table.
So using foreign key table I have updated the values in the list.
But now client wants me to fill the dropdown list with ID as well as description..
Please suggest me how to achieve this.
Thanks and Regards
NishadHi,
You the FM 'F4IF_INT_TABLE_VALUE_REQUEST' and try.
Fill the internal table with the key and description and pass the same to above FM.
You will get sample code by searching the forum.
Thanks.
Anversha -
Matrix column position problem in screen painter.
hi.
i am facing one problem.
ie.
i am developing one screen.
it is having 3 matrix
each matrix is having some columns
one matrix ok two matrix ok thrid matrix ok.
but
under third matrix i put some columnes
1, 2 ,3, 4,
in screen painter design mode every thing is ok
it is appearing like 1,2,3,4
but at preview mode or through the code if i open
it is appearing like 1, 4,3,2
in preview mode screen painter if i click on the form settings it is showing only..
matrix one columns only it is not showing either 2 or 3
and if i open the form through the code..
i am able to see the columns of matrix 1 n matrix 2 and matrix 3
i am using some code.
If (pVal.FormUID = "WIP2PROCESS" And pVal.ItemUID = "1000007") Then
oForm = SBO_Application.Forms.Item("WIP2PROCESS")
oForm.PaneLevel = 2
oForm.Settings.Enabled = False
oForm.Settings.MatrixUID = "59"
End If
now through the source code i am able to see the each column under matrix.
but if i change the matrix position at form setting it is changing but
if i click other folder and come back to previous folder..
again the column position is 1, 4,3,2
previously i changed to 1,2,3,4
how can i do it..
screen painter can i change it..
Any information plz update me..Hi Srinivas,
Can you do one thing for me ? Open your form in screen painter, set the columns as you want to display. Now change the unique id for the matrix. Then try to open it through code or see in preview mode.
Hope it helps.
Thanks & Regards
Ankit Chauhan -
In screen painter I am unable to attach the folder with the respective matrix. Please give the complete method to attach the above mentioned.
Hi Manish,
I am not too sure what you want to know, but if you want a matrix to be displayed only on a specific folder you should do the following. I am going to show you the code, but you can do parts of it in screenpainter as well. In screen painter you cannot display it like you would at runtime.
On your matrix you would set the PaneFrom and PaneTo properties. To only set it visible on the first folder:
Dim oItem As SAPbouiCOM.Item
Dim oForm As SAPbouiCOM.Form
oForm = oApplication.Forms.ActiveForm
oItem = oForm.Items.Item("My_Matrix")
oItem.FromPane = 1
oItem.ToPane = 1
To add the folder you'll have to remember to set the ValOn and ValOff properties:
Dim oFolder As SAPbouiCOM.Folder
oFolder = oForm.Items.Item("My_Folder").Specific
oFolder.Caption = "MyFolder"
oFolder.DataBind.SetBound(True, "", "UDS_1")
oFolder.ValOff = 0
oFolder.ValOn = 1
To invoke the folder's click event you have to code it manually:
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean) Handles oApplication.ItemEvent
If pVal.FormTypeEx = "My_Form" Then
If pVal.BeforeAction = True Then
If pVal.ItemUID = "My_Folder" Then
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
Dim oForm As SAPbouiCOM.Form
oForm = oApplication.Forms.ActiveForm
oForm.PaneLevel = 1
End If
End If
End If
End If
End Sub
Hope it helps,
Adele -
Screen Painter / MatrixLayout ..
Hi,
I copied the BusinessPartner form which contains a folder with a matrix that uses layout 'mlt_VerticalStaticTitle' ..
Now I want to add another matrix to a separate folder in the same screen but it wont let me set the layout to 'mlt_VerticalStaticTitle' !! Anyone any ideas ? I tried copying the one which works but screen wont let me ..
Seems very strange to me .. Anyone any idea ?
Also can someone tell me what the form keyword 'GridItemUID' means - I looked in the manual but can't find anything ..Hi
I am using SDK sample Catching Events to have xml of the forms for example.
You want to have Master with 2 Details (matrix).
- Create an MASTER_DATA table TableA.
- Create 2 MASTER_DATA_ROWS tables TableB, TableC.
- Create UDO, for example with title MyUDO, with TableA with choosing between services "Create default form" and 2 child: TableB, TableC.
Execute CatchingEvents project (with SaveXML(oForm) method on et_FORM_LOAD event) and open form of UDO.
So you have an example of Master and 2 Details (matrix) in 2 Folders.
For "mlt_VerticalStaticTitle" I can said only what this is a MatrixLayout.
In Screen Painter I found what you have for MatrixLayout 3 options: None, Vertical, VerticalStaticTitle. 2° and 3°: they can be a profit when one wants to have the tributes, the bands of the dresses. Sorry my english.
Try
Best Regards
Sierdna S.
P.S. Example of CatchingEvents project
Private Sub SBO_Application_ItemEvent(ByVal FormUID As String, _
ByRef pVal As SAPbouiCOM.ItemEvent, ByRef BubbleEvent As Boolean _
) Handles SBO_Application.ItemEvent
If pVal.FormType != 0 Then '
Dim EventEnum As SAPbouiCOM.BoEventTypes
EventEnum = pVal.EventType
If (EventEnum <> SAPbouiCOM.BoEventTypes.et_FORM_ACTIVATE) _
And (EventEnum <> SAPbouiCOM.BoEventTypes.et_FORM_LOAD) _
Then
Dim oForm As SAPbouiCOM.Form
oForm = SBO_Application.Forms.ActiveForm
If oForm.Title.Equals("MyUDO") Then
SaveAsXML(oForm)
End If
End If
End If
End Sub
Private Sub SaveAsXML(ByRef oForm As SAPbouiCOM.Form)
Dim oXmlDoc As Xml.XmlDocument
Dim sXmlString As String
oXmlDoc = New Xml.XmlDocument
'// get the form as an XML string
sXmlString = oForm.GetAsXML
'// load the form's XML string to the
'// XML document object
oXmlDoc.LoadXml(sXmlString)
Dim sPath As String
sPath = IO.Directory.GetParent(Application.StartupPath).ToString
'// save the XML Document
oXmlDoc.Save((sPath & "" & oForm.Title.Replace(" ", "") & "_" & oForm.UniqueID & ".xml"))
End Sub
Edited by: Sierdna S on Jul 8, 2008 6:01 PM -
TB V-24.4.0, Win XP32, Transfered from OE to TB today on friends system getting ready to upgrade to Win 7 64. Original email account is from Verizon.net and was able to import all mail and address book setting correctly into TB. However, at top of TB's folder pane, his main account isn't listed, only local folders. When I sent a test email to his account, it did not receive so I tried to click on the "Get Mail" button above the folder pane without sucess. Next to the right of the "Get Mail" button is a drop down and when I open, I see "get all new messages at the top and his main account (complete email address) below. Now when I click on his email in that button, his main started to populate fine. Looks like the main profile (account) isn't the default and after 3 hours of reading tips, support, help files, etc..at my wits end trying to get it setup correctly so I can back it up with Mozbackup and restore on new system. I would like to include a screen shot but not finding an option to do so at this time, another issue? Thanks in advance.
given a single pop account import from outlook express, the "Local folder" will be the folders for the account. This is controlled from Tools menu Alt+T) > account settings > Server settings > advanced button.
This is also where the option to "include this server when getting mail" is hidden. Turn it on if you can.
Using the local folder is actually less confusing as there is only one set of inbox sent etc. and is all most people need even with multiple pop accounts all using the same global inbox.
The use on IMAP requires a separate account in the list as content is synchronised folder by folder.
Maybe you are looking for
-
How do I delete photos in the icloud and have them stay gone?
How do I delete photos in the icloud and have them stay gone!
-
My partition menu in Disk Utility is greyed out in recovery partition
So upgraded to yosemite and after a while decided that i would do a clean install of it because it didn't update the recover partition and i could no longer boot into Ubuntu partition. So i made my bootable drive and booted into it. I was met with: W
-
Ipad 1 screen black, need to reset to factory default
After 4 years of use, my ipad 1 has 1/2 screen black (looks like pixel failure). I have a password on the ipad that I can not unlock because I can not see the whole screen. I want to be able to set it back to factory default (wipe all data). I tri
-
Multiple Fact sheets issue for Account
Hi All, Need help to trigger the multiple fact sheets. SAP has given one SAP note "2104590 - Use of multiple PDF factsheets in account overview page". I have implemented that note and entered Custom Class and Z smartform in the configuration . SM30-
-
I am creating a Free-Standing Application using FRAME. As I want to improve the friendiness of my button, instead of using text over the button, I intend to use some picture image. I have been trying hard to work the code out but to no avail. May I e