Setting higher MAX resolution in CS6: HOW?

Hi everyone,
I work in an industry where soon our Photoshop TIF files will require super high resolution for our pixel mapping. Though our files are not that big size wise (2x2 inches max), they tend to be between 10,160 and 50,000 DPI, depending on the print format we need to achieve. My question is:
On the current version of CS6, I am not able to import older TIF files with resolutions above 10,000 DPI; they automatically reset to the highest default, 9999.999 DPI. I also am unable to create new files above 9999 DPI. The program says I need to pick an amount between 1 and 9999.999 DPI. We have older machines and versions of CS4/5 that allow us any resolution up to 50,000 DPI, no problem.
Why can't I find any information on how to get my current CS6 version to not only STOP resizing images to 9999.999 DPI, but also how to increase the max resolution allowed? Setting something like this should NOT be this difficult. Did Adobe make CS6 have a high value of 9999? If so, we need to downgrade to an older version because we need this resolution with our newer projects.
Please help me find a setting or way to allow my CS6 to both read and create files at resolutions over 10,000. Thanks.

Might this solution work for you in CS6?
Create a document double the size you need at 5,000 DPI, then reduce by 50% at the end?
CS6 13.0.6 screen shot:
I have no idea if this works for you or not.
Tuna wrote:
station_two
I don't want to go back to an older version, but I am shocked that this recent version (CS6), has limitations on the resolution offered…
I just want to know why new versions have a max pixel setting…
LOL !
The best answer I can give you is because that's what Adobe wants. Period.
"I cannot explain the universe to you, I can only describe it." That's what my astronomy professor used to say at the ETH just over half a century ago.
My experience in the last three decades is that Adobe will extremely rarely address such a question, if ever.

Similar Messages

How do I set high resolution on my Canon Pixma 600 printer?

How do I set high resolution on my Canon Pixma 600 printer? Also the copies from my computer look ok, but when I copy them from the printer, I can hardly read the print. Any help out there? Thanks , Martha

Hello mlshouse1758.
Additional troubleshooting will have to be done to narrow down the cause of your copy issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

T500- Can't set display to max resolution of 1680 x 1050

I bought a T-500 with Windows 7 professonal x64. Max resolution of the screen I can set is 1280x800. But it should have option 1680 x 1050.
Tried via Intel general settings but it says this 1680 x 1050 option already excists, but I have no possibillity to switch to this format.
How can I set this 1680x 1050 resolution?
Hope someone can help.
Thank you.
Vintiem

what is the model number of your T500? xxxx-xxx
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Message says "screen resolution problem" and says to set higher than 1020 x 600. My screen resolution is set higher. Why am I getting this message all the time I use firefox?

when I go on to Firefox I keep getting the message that there is a screen resolution problem and it says I should set it higher a than 1020 X 600. But my screen resolution is set higher. It is set at 1360 x 768. Why am I getting this message continuously?

I've had the problem too... for at least a month or more. It would happen when logging into yahoo mail. But it happens only with firefox... not explorer. I contacted yahoo and he had me first disable add ons... no change... and since it didn't happen with explorer, they said to contact firefox. So I followed the advice of cor-el's post (on this page) and made the text on my page smaller... It did fix the issue.... but, I liked the size of the text the way I had it. So, how do I get it back to that size, and not have that annoying message any longer? thanks!!

How to increase the max resolution of the screen under KDE?

Now, the max resolution I can set is 1280*768, how can I get a larger one? such as 1920*1080.(my screen is big enough)
My arch is installed on a VMware virtual machine, the Win7 install on it can change the resolution as I wish.
I install the arch linux and KDE according to the beginners' guide on the wiki, please tell me if I need to provide more information.
Thank you all : )

You probably need some VMWare guest additions and drivers. Currently, it looks like your system is using the VESA/MESA framebuffer or something.
Have you read the wiki? https://wiki.archlinux.org/index.php/Vmware

I have a new macbook pro and an LG w2361v monitor. The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)

I have a new macbook pro and an LG w2361v monitor. The max resolution the mac is allowing me to set is 1400x1050, why can't I get to the max resolution the monitor can accept (1900x1080)? I know that the monitor is able to accept this resolution but It can't seem to find it. Is it something to do with the new thunderbolt port? or the fact that I'm utilizing the VGA adaptor? I could go HDMI if that works better.

Use DVI or HDMI.
VGA runs out of steam after a while.

Hi, I am using Indesign CS6, How to set the page size in Inches.

Hi, I am using Indesign CS6, How to set the page size in Inches.

All fields in InDesign can be entered in any measurement system. So, if you want to make an 8"x10" document and go to File>New Document and the window looks like this:
…you can type either 8 in or 8" into the Width field like this:
…and when you move to the next field, it will convert the eight inches into the equivalent number in the unit of measure that it is using at the moment, like this:
… (203.2 milimeters is the same as 8 inches). You can also enter a different measurement unit into other fields once the file is created, such as the width or height of a frame, or the position of an object in the X and Y coordinates.
If you would rather just work in inches instead of having to type the inches mark or abbreviation, go to InDesign>Preferences>General and select the Units & Increments tab. There you will see Ruler Units for Horizontal and Vertical at the top of the window. Set them to Inches and all of the fields will display in inches. If you do that to an open document, you will change the unit of measure for that document. If you do it while no documents are open, it will change the unit of measure for any new documents you create. To change the unit of measure for existing documents, you will have to open each and make the change.

Possible to set min/max size to a resizable Stage? If so, how?

Is it possible to set a minimum and maximum size to a resizable Stage? If so, how would this be done? Do I use some kind of onResize event handler or is there some other way?
Here is a sample code where I have a 500 x 500 px image in a 300 x 300 px scrollable scene that is in a resizable stage. Right now, I am able to resize the stage to any size, but I would like to limit the resizable minimum width and height to 100 x 100 px and limit the resizable maximum width and height to 600 x 600 px.
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.control.ScrollView;
import javafx.scene.control.ScrollBarPolicy;
import javafx.scene.image.ImageView;
import javafx.scene.image.Image;
var scene: Scene;
Stage {
    resizable: true
    scene: scene = Scene {
        width: 300
        height: 300
        content: ScrollView {
            hbarPolicy: ScrollBarPolicy.ALWAYS
            vbarPolicy: ScrollBarPolicy.ALWAYS
            width: bind scene.width
            height: bind scene.height
            node: ImageView {
                image: Image { url: "{__DIR__}roses.jpg"}
}

Hi, I don't understand how WidgetFX is going to allow me to set min/max size to a resizable Stage. After all, it is a desktop widget platform and I'm not trying to build a desktop widget. None of the demos I've tried use a decorated Stage with platform decorations that can be used to drag and resize the Stage.
I'm just trying to limit the min/max size of a resizable Stage. If you think WidgetFX will address my problem, I think a better solution is the JavaFX Stage Controller class I found available at http://code.google.com/p/memefx/. However, the JavaFX Stage Controller class still doesn't address the problem I have because it doesn't stop the user from dragging the Stage beyond the size restricted by the min/max height. It only reverts the Stage to the max size after the user already dragged and resized the Stage beyond the max resizable width/height.

Photoshop cs6 crashes with "appcrash - module ig75icd64.dll; no problem for a local admin user however. i've tried giving specified user full access to photoshop.exe and set it to Win XP compatibility. how do i fix this without giving user local admin acc

photoshop cs6 crashes with "appcrash - module ig75icd64.dll; no problem for a local admin user however. i've tried giving specified user full access to photoshop.exe and set it to Win XP compatibility. how do i fix this without giving user local admin access?

Danny,
Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

T420s - Unable to set high resolution when on external monitor via DP.

Sorry, let me clarify -
Unlike the OP, I do *not* switch back to 50 Hz on battery. However, I am running the NVIDIA beta driver. I installed this because with the Lenovo driver, the machine was not outputiting 2560x1600 over the display port. The highest resolution it would output was 2048 x 1000-something (out of the office now and don't have the exact numbers).
So yes, with the Lenovo driver the external DP was working, just not outputting the highest resolution. Installing the Nvidia driver fixed that problem. Whether it is related or not, I don't know, but with this driver I do not get 50Hz resolution on the LCD on battery -- everything stays at 60.
I have not rolled back to the Lenovo driver to test whethe this is reall a driver issue, but suggest that the OP try out the Nvidia driver.
edit note: Change subject to match description.

The unable to set high resolution issue on the T420 (not the T420s) was sent to engineering by JameZ just a few days ago. See more here. I suggest you post there or contact JameZ so they know it also occurs on the T420s.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

How can I set a custom resolution on a MacbookAir for an external monitor?

I've been trying to set a custom resolution on my macbook air for an external monitor but the only options displayed are 1280x1024 and 800x600. How can I bring up more options? Thanks!

Your Mac sets those resolutions (and the display NAME) based on the information your display provides when a query is sent at Startup. If those are the only resolutions shown, then your display has said that is all it can do.
What display is this, and what Interface is being used?
This pane will tell you more about what the display has reported:

Max Resolution or DPI of still images

Hi,
This is an offshoot of a problem I thought I was having with Encore CS5 and transcoding, but it is also part of the solution.
I was creating about a 30 min project on Premier CS5 with AVCHD and still images imported with a couple of mp3 music tracks. Win 7, GTX 295, 6MB Ram.
I can do whatever I wanted in premier in terms of any jpeg could be imported, scaled, add motion, zoom, effects, whatever..
When it was time to put it on a blu-ray, it would get send to Encore via the dynamic link and would always fail at seemingly random places during transcode and of course, ultimately crash, or come up with an "object not found" and ultimately never burn.
I tried all the suggestions, taking spaces out of file names, burning to a blu-ray folder, and everthing else I could find in the forums.
I also spent 2.5 hours with Adobe logged into my computer and they could not figure out why:
ENCORE CS4 would transcode and burn the exact same project CS5 would choke on and fail.
I had ignored the suggestion in the forum that Premier can't handle large image files.. After all, they seemed to load and work, I couldn't imagine that transcoding would fail on a still image at 4000X3000 and 300dpi, but wouldn't you know it, I resized all of my images to lower res, and bingo, CS5 churned and burned the blu-ray. I did notice after trying, that if it won't render in the work area of PPro CS5, that it would also fail in the transcoding in Encore CS5, but not CS4. If it didn't like a particular image, it would just freeze the render process and lock PPro CS5 right up.. After several image resizes and lots of reboots, it finally all rendered, and then it was fine in Encore CS5 after that.
So this brings me to my point, and I would love an official answer or guideline from Adobe..
What is the max resolution of still images that can be used in PPro CS5 and consequentally be handled in Encore CS5? What about dpi?
Am I correct to assume that 300dpi is useless in HD? Meaning, even in true HD on a tv screen, isn't it still 72dpi? I couldn't figure out if it was the DPI or the dimensions of the image it couldn't deal with. It seemed as long as I was around 2500X1500 and under 200 DPI I was ok.. but more than that was definately a show stopper. However, I would also think a 300dpi picture would be sharper and crisper, so this stinks that premier can't seem to deal with a 8-10 megapixel jpeg or image..
I really can't believe it, I really thought Adobe would be ready for todays images from cameras, I mean I think nearly every camera you can put your hands on now shoots 8-10 megapixels which would put you right there in 4000X3000 and 300 dpi, how could Premier Pro CS5 and Encore choke on those? And more amazingly why does Encore CS4 not choke?
D.J.

Ann,
Thank you for the link to that article, and it sort of explains the limits, but it doesn't explain why an image off of a camera that was a jpg at 4000X3000 and 300dpi , which is about 10 megapixels and about 5MB in file size choked the transcode process, as it doesn't seem to be anywhere near the limits. As soon as I changed the images to something more like 2500X1200 and 180 dpi or less, everything was fine.
Could it have anything to do with cumulation? For example, I had about 20 of these images set up in a slide show sort of way, and added some motion to them in the effects.. Do you think that matters?
Also, the DPI in relation to video, as I said, it sure does seem that a larger image at 300 dpi offers quite a bit more clarity in the final product than something at a lower DPI..Especially in the case where I want to zoom in on the image or use some motion.. Maybe I'm nuts and a 72dpi 1920X1080 image is all I will ever need, but then in that case, it doesn't leave much room to be able to zoom in or out and move it around.. And if you do zoom in a lower quality image, then the quality will really be seen when it becomes part of the video.. Which is why I wanted to start with higher res stuff in the first place..
D.J.

15" Max Resolution

Hi
Im considering buy a macBookPro and I cand decide on a 15" or 17".
My main usage is development with Xcode so having a high resolution is important to see code, Simulator, traces, etc.
I see in the specs that the max resolution for the 15" macbook pro is 1440x900.
1) Is this true for all 15"? Including those without *9600M GT*?
2) If I plug the macBook to my PC's monitor (with a resolution of 1280x1024), can I get that resolution or *am I limited to 1440x900 regardless* of the monitor?
3) How does *Dual display and video mirroring* work?
Thanks a lot

The 15" MBP has a native resolution (internal display) of 1440x900. You can set it lower, but display will be suboptimal ('fuzzy'). It can support that resolution while simultaneously driving an external display at a resolution of _up to_ 2560x1600.
So, if you connect a 1280x1024 you can have your internal display at 1440x900 and the external display as 1280x1024 as long as you are using the external as an 'extended desktop', i.e. not mirroring. When mirroring, you see the same thing on both displays, and both displays are set to the same resolution, which is the lower resolution of the two displays. So in your case, if you have mirroring on, the external and the internal would be 1280x1024, meaning the image on the MBP would be fuzzy and stretched.

Max resolution connecting to dell monitor

i am dumb so please pretend i'm your mom trying to set this up and asking the Q . i have a 3 yr old dell 24" (DVI/VGA) monitor and i'd like to connect my 13" MBP to it. i bought the 'mini displayport to DVI adapter' for my mbp and have connected to my monitor, but the max resolution i can achieve under displays is 1280 x 800 to the monitor, so beats the point of using the larger monitor. and the res isn't too crisp either.
am i hosed? if i buy a new monitor to connect to my mbp, can i get finer resolution (i.e. at least 1920x1200)?
or is the 13" mbp limited to 1280 x 800????

System Preferences > Displays
Mirrored or not?
When mirrored, you use a compromise between what the built-in screen wants and what the external screen wants. If you want to Mirror, you have hit your limit.
If you uncheck Mirrored, you get Extended Desktop, and the | Arrange | pane is added.
Using the arrange pane, you drag the little screens to represent how your real screens are on the bench. The mouse can move across the boundary between the screens and onto the other screen.
Choose the Display pane. You get a separate resolution setting FOR each screen ON each screen.

High color resolution

How to set up high color resolution for HP OfficeJet Pro X451dw to 1200 x 1200 (black) & Color (2400 x 1200) as my HP setting box show color resolution 600 x 600 dpi as my color print image is very low not coming rich colored image.
please there is any setting for high color resolution

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Setting higher MAX resolution in CS6: HOW?

Similar Messages

Maybe you are looking for