Setting properties with parameter values in templates

I'm using templates with JSF. I'd also like to acquire the value of a request parameter and pass it to a setter method in a ManagedBean so that I can derive the page body from it. My simplified template looks like this :
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:ui="http://java.sun.com/jsf/facelets"
 xmlns:utils="http://java.sun.com/jsf/composite/utils" xmlns:f="http://java.sun.com/jsf/core">

<f:metadata>
 <f:viewParam name="myparameter" value="#{myBean.someProperty}" />
</f:metadata>
<h:head>
 <title>No title here.</title>
</h:head>
<h:body>
 <div id="page">
 <div id="main">
 <ui:insert name="body" />
 </div>
 <utils:navigation />
 </div>
</h:body>
</html>The "body", created with ui:composition, is using "myBean". But it doesn't matter because the "set" method isn't being called on the bean. Where should I put "f:viewParam" code
to set the property of a ManagedBean if I'm using templates?
Thank you in advance for any help.

Problem solved.
Found the solution to my general problem by making use of the Annotation "ManagedProperty". It only applies to request scope apparently but that is the scope where I need it.
I found these two pages helpful.
http://stackoverflow.com/questions/4888942/viewparam-vs-managedpropertyvalue-param-id
http://download.oracle.com/javaee/6/api/javax/faces/bean/ManagedProperty.html

Similar Messages

Crystal Report Viewer 11.5 Java SDK - How to set sub report parameter value

Good day!
I have a report with 3 sub-reports in the detail section. Main report has two parameters and each sub-report has one parameter in turn. We have our own JSP to receive parameter values from the user. I am using the following code to do the parameter value setting later into the report. Parameter value setting works for main report, but not for the sub-report.
I get an Error, for the first sub-report, from the viewer saying:
The parameter 'parametername' does not allow null values
On this article: [article link|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333233323331%7D.do]
It says to set the report name of the parameter field to the name of the sub report. On this aspect, assuming this tip/solution works, I would like to read the names of the sub-reports and their parameter names. I do not want to hard-code them into our application.
Here is my current code:
sdk.occa.report.data.Fields parameterFields = new Fields();
I have a HashMap of <parameterName, parameterValue>
Iterate through the map
report.data.ParameterField aParameterField = new ParameterField();
aParameterField.setReportName(""); //main report
report.data.Values theValues = new Values();
ParameterFieldDiscreteValue aParameterFieldDiscreteValue = new ParameterFieldDiscreteValue();
aParameterFieldDiscreteValue.setValue (aValue);
theValues.add(aParameterFieldDiscreteValue);
aParameterField.setName(parameterName)
aParameterField.setCurrentValues(theValues);
parameterFields.add(aParameterField);
viewer.setParameterFields(parameterFields);
Please look at the line:
aParameterField.setReportName(""); //main report
Here's where I would like to say
if (parameter is subreport's parameter) then setReportName(subreport name);
Thx

It was little difficult to navigate down the objects to find the sub reports and their parameters. I am attaching the code:
May be there are other ways to do the same.
public String getReportNameForParameter (String parameterName, ReportClientDocument reportClientDoc)
 String result = "";
 boolean found = false;
 try {
 SubreportController src = reportClientDoc.getSubreportController();
 DataDefController ddc = reportClientDoc.getDataDefController();
 IDataDefinition idd = ddc.getDataDefinition();
 Fields fs = idd.getParameterFields();
 Iterator fiter = fs.iterator();
 while (fiter.hasNext()) {
 IField ifld = (IField) fiter.next();
 if (parameterName.equals(ifld.getName())) {
 found = true;
 //System.out.println ("\t Field Name/Description/HeadingText: " + ifld.getName() + "/" + ifld.getDescription() + "/" + ifld.getHeadingText());
 if (!found) {
 IStrings reportNames = src.getSubreportNames();
 //System.out.println (" Sub Reports If Any ...");
 if (reportNames != null) {
 Iterator iter = reportNames.iterator();
 while (iter.hasNext()) {
 String repName = (String) iter.next();
 //System.out.println ("\t Sub Report Name " + repName);
 ISubreportClientDocument srcd = src.getSubreport(repName);
 ddc = srcd.getDataDefController();
 idd = ddc.getDataDefinition();
 fs = idd.getParameterFields();
 fiter = fs.iterator();
 while (fiter.hasNext()) {
 IField ifld = (IField) fiter.next();
 if (parameterName.equals(ifld.getName())) {
 result = repName;
 break;
 //System.out.println ("\t\t Field Name/Description/HeadingText: " + ifld.getName() + "/" + ifld.getDescription() + "/" + ifld.getHeadingText());
 //System.out.println ("********************************************************** ");
 catch (Exception exc) {
 System.out.println ("Error/Exception while trying to find the report name for parameter [" + parameterName + "]");
 System.out.println ("*******************************************************************************************");
 exc.printStackTrace();
 return result;

Bookmark transaction with parameter values

Hello,
i want to add a bookmark to the sapgui (6.4) usermenu which starts a transaction (rsdmd) and also passes the parameter-value (infoObject), so that the user don't has to search for the respective infoObject.
Is that possible with sapgui?

Hi
You can call a transaction passing it values for the screen:
Addition 2
... USING bdc_tab [bdc_options]
Effect
Use this addition to pass an internal table bdc_tab of row type BDCDATA from the ABAP Dictionary to a dialog transaction. The additions bdc_options control the batch input processing. When a transaction with addition USING is called, the system field sy-binpt is set to value "X" in the called program - while this transaction is running, no other transaction can be called with this addition.
OR
You could call the program that the transaction calls directly using the submit statement as follows:
SUBMIT {rep|(name)} [selscreen_options]
                    [ list_options ]
                    [ job_options]
                    [AND RETURN].
Your full requirement however is unclear as you do not specify whether you are working with SAP Standard programs or custom programs etc. I think you should elaborate on your requirement.
Regards

NPE setting properties with CustomEvent

Hello, I am trying out CustomEvents, but there is something strange setting properties. I try to do a
public class CustomEvents extends VBean {
   private ID myEvent = ID.registerProperty("MY_EVENT");
   private ID myData = ID.registerProperty("MY_DATA");
   private IHandler handler = null;
   private void log(String message) {
      System.out.println(message);
   public CustomEvents() {
      log("Constructor");
   public final void init(IHandler handler) {
      this.handler = handler;
      super.init(handler);
      log("Init");
      try {
         CustomEvent customEvent = new CustomEvent(handler, myEvent);
         if ( (myEvent == null) || (myData == null) || (handler == null) || (customEvent == null) ) {
            log("There be nulls");
         handler.setProperty(myData, "hep");
         dispatchCustomEvent(customEvent);
      } catch (Exception e) {
         e.printStackTrace();
      log("done");
}but end up with an
Constructor
Init
java.lang.NullPointerException
     at oracle.forms.handler.JavaContainer.setProperty(Unknown Source)
     at fi.affecto.webmarela.forms.CustomEvents.init(CustomEvents.java:31)
     at oracle.forms.handler.UICommon.instantiate(UICommon.java:2984)
     at oracle.forms.handler.UICommon.onCreate(UICommon.java:1040)
     at oracle.forms.handler.JavaContainer.onCreate(Unknown Source)
     at oracle.forms.engine.Runform.onCreateHandler(Runform.java:2254)
     at oracle.forms.engine.Runform.processMessage(Runform.java:3347)
     at oracle.forms.engine.Runform.processSet(Runform.java:3491)
     at oracle.forms.engine.Runform.onMessageReal(Runform.java:3099)
     at oracle.forms.engine.Runform.onMessage(Runform.java:2857)
     at oracle.forms.engine.Runform.sendInitialMessage(Runform.java:5635)
     at oracle.forms.engine.Runform.startRunform(Runform.java:1207)
     at oracle.forms.engine.Main.createRunform(Unknown Source)
     at oracle.forms.engine.Main.start(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
done
*/any suggestions? myData is not null but has it failed to hook on to something during initialization? I decompiled JavaContainer and it only has null checks for top-level incoming parameters and the stack trace doesn't give any more detail. Or am I misunderstanding the usage of Custom Events completely?
Thankful for help,
-Nik

Nicklas,
the problem is that Forms does not have a property
handler.setProperty(myData, "hep");
You need to override
public boolean setProperty(ID ID, Object object)
in your Java implementation. Then within this method you evaluate if the ID is "myData" and if, do something. If no ID match can be found then you call
return super.setProperty(_ID, _object);
Thsi way all custom properties are handled by you and all Forms properties are passed to Forms.
Frank

To SET HANDLER for parameter value

Dear Gurus,
When the user enters a plant value in PARAMETER then i need to hide some of the Screen fields.
But the system has to trigger the PAI automatically
I know this can be acheived using CL_GUI_CFW but how to implement the SET HANDLER method for a parameter
I searched and found the HANDLER METHODS for ALV, TREE, TIMER etc but I want it for SELECTION-SCREEN elements.
I searched WIKI.SDN.SAP.COM and SDN and other stuff.
Please provide me sample code possibly
Please guide me.
Regards
Ramchander Rao.K

for selecion screens, I have this:
PARAMETERS p_cebe TYPE char01 RADIOBUTTON GROUP grp1 DEFAULT 'X' USER-COMMAND flag.
           PARAMETERS p_ceco TYPE char01 RADIOBUTTON GROUP grp1.
PARAMETERS: p_kokrs LIKE cobk-kokrs DEFAULT 'CORP' MODIF ID cec,
                                    p_gjahr LIKE cobk-gjahr                MODIF ID cec.
         PARAMETERS : p_rbukrs LIKE faglflexp-rbukrs MODIF ID ceb,
                                   p_ryear LIKE faglflexp-ryear   MODIF ID ceb,
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_cebe = 'X' AND screen-group1 = 'CEC'.
      screen-active = '0'.
    ENDIF.
    IF p_ceco = 'X' AND screen-group1 = 'CEB'.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.

Database logon failed when opening report with parameter values in CrystalReportViewer

Hi,
I designed 2 crystal reports: report A contains parameter fields and report B did not contain any parameter
I can open both reports in development site using CrystalReportViewer control. When I open the reports in testing site,
I can open report B but can't open report A. It display error message "Database logon failed". When I set EnableDatabaseLogonPrompt
to true and try to open the report A again, it shows database connection data which was created on report.
In addition, it is strange that it displays error "Database logon failed" when I click an item in group tree panel of the report B. This indicates that it can load data from database
in testing site but it connect to development database when clicking items in group tree panel
All reports connect to database using Windows Authenication. It use dynamic database connection at runtime
How to ensure the report always connect database using login data dynamically at runtime?
Below is my code about database connection:
string strServerName = null;
string strDatabaseName = null;
ReportDocument rptDoc = new ReportDocument();
rptDoc.Load(strFilePath);
ConnectionInfo connInfo = new ConnectionInfo();
TableLogOnInfo logonInfo;
for (int i = 0; i < rptDoc.Database.Tables.Count; i++)
logonInfo = rptDoc.Database.Tables[i].LogOnInfo;
ReportHelper.GetReportConnection(ref strServerName, ref strDatabaseName, strSystemType);
logonInfo.ConnectionInfo.ServerName = strServerName;
logonInfo.ConnectionInfo.DatabaseName = strDatabaseName;
logonInfo.ConnectionInfo.IntegratedSecurity = true;
rptDoc.Database.Tables[i].ApplyLogOnInfo(logonInfo);
rptDoc.Database.Tables[i].Location = rptDoc.Database.Tables[i].Location.Substring(0, rptDoc.Database.Tables[i].Location.Length - 2);
crvViewer.ReportSource = rptDoc;
crvViewer.DataBind();
Development environment:
- SAP Crystal Reports 2013 Support Pack 1
- Visual Studio Professional 2012
- .NET Framework 3.5
- DDL
CrystalDecisions.Shared (v 13.0.8.1216)
CrystalDecisions.Web (v 13.0.8.1216)
CrystalDecisions.CrystalReports.Engine (v 13.0.8.1216)
Database connection in crystal report:
- Database Type: OLEDB (ADO)
- Provider: SQLOLEDB
- Integrated Security: True
Thanks and Regards,
Tony

Hi Tonylck
Try to pass login info to crystal report dynamically as follows:
using System;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
namespace WindowsApplication1
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
ReportDocument cryRpt = new ReportDocument();
TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
ConnectionInfo crConnectionInfo = new ConnectionInfo();
Tables CrTables ;
cryRpt.Load("PUT CRYSTAL REPORT PATH HERE\CrystalReport1.rpt");
crConnectionInfo.ServerName = "YOUR SERVER NAME";
crConnectionInfo.DatabaseName = "YOUR DATABASE NAME";
crConnectionInfo.UserID = "YOUR DATABASE USERNAME";
crConnectionInfo.Password = "YOUR DATABASE PASSWORD";
CrTables = cryRpt.Database.Tables ;
foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
crtableLogoninfo = CrTable.LogOnInfo;
crtableLogoninfo.ConnectionInfo = crConnectionInfo;
CrTable.ApplyLogOnInfo(crtableLogoninfo);
crystalReportViewer1.ReportSource = cryRpt;
crystalReportViewer1.Refresh();
Ref
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-dynamic-login.htm
Mark as answer if you find it useful
Shridhar J Joshi Thanks a lot

Quering properties with dependant value

Hi,
I have 2 properties in KM which property B is dependant on property A.
for example:
Property A - Country
Property B - Cities
Allowed values are:
Germany - Walldorf, Berlin, Frankfurt, Hamburg
France - Paris, Nice, Bordeaux
(values were entered hard coded when properties were defined)
How do I get propery B's values by quering on property A by Java Code?
For example: for Germany I want to get Walldorf, Berlin, Frankfurt, Hamburg.
Thanks,
Omri

Solved it my on.
By querying on the 'additional_meta_tags' field I can get the 'dependOn' value and correct property.
Omri

RWRUN60: Problem with parameter value containing space between single quote

Hi All
I'm using RWRUN60 to generate my report by following way:
C:\orant\BIN\RWRUN60.EXE userid=DBUser/dbpasswor@db BACKGROUND="NO" BATCH="YES" DESFORMAT="pdf" DESNAME="C:\report.pdf" DESTYPE="FILE" ORIENTATION="LANDSCAPE" PARAMFORM="NO" P_REPORTID="2431" P_REPORTNAME="Report Name" report="C:\report.rdf" P_WHERE="StartDate>=to_date('2011-07-14 10-37-00','YYYY-MM-DD HH24-MI-SS')"
When I tried to run given command above nothing was executed executed and any log didnt created.
I found out that problem occurs when text between two single quotes contains spaces. In my case it is a parameter P_WHERE. I need to keep such format because it is part of report query.
When I removed last parameter from command RWRUN60 successfully genereate pdf document.
Further I added new test parameter P_TEST(it is ignored by rdf) in the end of command line following:
P_TEST="test '11'" - rwrun60 generates report
P_TEST="test '1 1'" - rwrun60 doesn't; generate report
Can somebody help how to resolve given problem. Is it parsing bug or what else?

Spaces on command lines a very often a bad idea. Get rid of them by changing the command, e.g.:
to_date('2011-07-14:10-37-00','YYYY-MM-DD:HH24-MI-SS')

Direct print out with parameter values dialog

Post Author: lp75
CA Forum: .NET
Is it possible to get a parameter dialog on a direct print out ?reportDocument."Show a dialog similar to that one in CrystalReportViewer"reportDocument.PrintToPrinter(...);

Post Author: ole
CA Forum: .NET
reportDocument."Show a dialog similar to that one in CrystalReportViewer" is not possible, because ReportDocument has no user interface at all. You have to look in namespace CrystalDecisions.Windows.Forms. There are things like CrystalDecisions.Windows.Forms.PromptingDialog. There are also some other dialogs. I don´t, if that will work. Maybe it is a help. Please inform if you are successful. I think I will need it some day, too.

Missing parameter values when trying to export to pdf in C#

HI all,

I'm having a problem passing a parameter from my c#.NET code through Crystal Reports 2008...

Crystal Reports Developer version 12.1.0.892
using a WinXP machine
The parameter I've setted up in Crystal Reports Design is one to dynamically change the query that will run on the report:
"SELECT * FROM REPORTS.{?Protocolname}_FC_QUERY"


The code I use calling one of the reports I must provide:

using System;
using System.Collections.Generic;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
using System.Data;
using System.Data.OracleClient;
using System.Collections;
namespace CrystalReportsRapportjes
{
class MainClass
{
public static void Main(string[] args)
{
Console.WriteLine("Start of program!");
string connString = "server=CT_PRD;user id=report;password=report";
OracleConnection conn = new OracleConnection(connString);
try
{
conn.Open();
Console.WriteLine("Connection opened.");

Console.WriteLine("Connection Properties:");
Console.WriteLine("\tConnection String: {0}", conn.ConnectionString);
Console.WriteLine("\tServerVersion: {0}", conn.ServerVersion);
Console.WriteLine("\tState: {0}", conn.State);
QL_ExportReport("C:\\Data\\converted2crystal\\PLANNING_REPORT_params.rpt");

} catch (OracleException e) {
Console.WriteLine("Error: " + e);
} finally {
conn.Close();
Console.WriteLine("Connection closed.");
}
Console.WriteLine("End of program!");
Console.ReadKey();
}
private static void QL_ExportReport(string reportName)
{
ReportDocument CR_reportDocument = new ReportDocument();
DataSet ds = new DataSet();
CR_reportDocument.Load(reportName);
CR_reportDocument.SetDatabaseLogon("Reports", "Reports");
for(int i=0;i<CR_reportDocument.DataDefinition.ParameterFields.Count; i++)
{
Console.WriteLine("Reading parameters");
Console.WriteLine(CR_reportDocument.DataDefinition.ParameterFields.ParameterFieldName);
if(CR_reportDocument.DataDefinition.ParameterFields.ParameterFieldName==
"Protocolname")
Console.WriteLine("Correct parameter found, now assigning value");
ParameterValues ThisPV = new ParameterValues();
ThisPV.AddValue("TMC999C999");
CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.Clear();
CR_reportDocument.DataDefinition.ParameterFields.DefaultValues.Clear();

CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;
//CR_reportDocument.SetParameterValue("Protocolname","TMC999C999");
//CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
}
CR_reportDocument.Refresh();
CR_reportDocument.ExportToDisk(ExportFormatType.PortableDocFormat,"C:\\Data\\converted2crystal\\EDC_PLANNING_RPT_params.pdf");
CR_reportDocument.Close();
}
}
}

The exceptions he throws using this code is = CrystalDecisions.CrystalReports.Engine.ParameterFieldCurrentValueException: Missing parameter values. ---> System.Runtime.InteropServices.COMException: Missing parameter values.
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException
at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream
at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream
at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export
at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk
at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 72
at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33

When I use the code
CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
instead of
CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;

the error I get there is:
System.ArgumentException: Value does not fall within the expected range.
at CrystalDecisions.Shared.SharedUtils.ConvertToDecimal
at CrystalDecisions.Shared.ParameterDiscreteValue.set_Value
at CrystalDecisions.Shared.ParameterValues.AddValue
at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 69
at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33



Can someone please tell me what's the right way passing a parameter to a report?

Thanks in advance.

You should use the
ReportDocument.SetParameterValue("ParameterName", "ParamValue");
>
Els Cochez wrote:
> When I use the code
> CR_reportDocument.DataDefinition.ParameterFields.CurrentValues.AddValue(ThisPV);
> instead of
> CR_reportDocument.DataDefinition.ParameterFields.ApplyCurrentValues(ThisPV) ;
> 
> the error I get there is:
> System.ArgumentException: Value does not fall within the expected range.
> at CrystalDecisions.Shared.SharedUtils.ConvertToDecimal
> at CrystalDecisions.Shared.ParameterDiscreteValue.set_Value
> at CrystalDecisions.Shared.ParameterValues.AddValue
> at CrystalReportsRapportjes.MainClass.QL_ExportReport in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 69
> at CrystalReportsRapportjes.MainClass.Main in c:\Data\sharpdevelopfolder\CrystalReportsRapportjes\CrystalReportsRapportjes\Program.cs:line 33
> 
> 
> Can someone please tell me what's the right way passing a parameter to a report?
> 
Try parsing the parameter value to a decimal value before setting it as parameter value.
Hope this will help

ORA-19510: failed to set size with ORA-27059: could not reduce file size

Hi,
I have RMAN backup implemented and getting below error.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on c1 channel at 01/12/2014 04:28:37
ORA-19510: failed to set size of 12839996 blocks for file "/home/oracle/DBBACKUP/Oracle10g1/Full_Backup/DB_Backup_201401128366598241" (blocksize=16384)
ORA-27059: could not reduce file size
Linux Error: 28: no space left on device
Additional information: 2
I have checked with following scenarios:
1. taking backup by setting the MAXSETSIZE parameter value greater than the maximum size of tablespace.
2. taking compressed incremental backup with maxsetsize as unlimited.
3. taking compressed incremental backup with maxpiecesize value as 20G/40G/80G/120G and maxsetsize as unlimited.
Following is the RMAN backup script:
RMAN> run
2> {
3> allocate channel c1 device type disk maxpiecesize 120G
4> format '/home/oracle/DBBACKUP/Oracle10g1/Full_Backup/DB_Backup_%Y%M%D%t%p';
5> backup incremental level 0 as compressed backupset database plus archivelog delete input;
6> crosscheck backup of database;
7> crosscheck backup of controlfile;
8> crosscheck archivelog all;
9> delete noprompt expired backup of database;
10> delete noprompt expired backup of controlfile;
11> delete noprompt obsolete recovery window of 15 days;
12> release channel c1;
13> }
14> exit;
Oracle database version is 10.2.0.1.
The database is on Linux system and we are taking the RMAN backup on mounted Windows NTFS disk.
The remaining space on NTFS system 1.7TB and the total database size 850GB. Used size by database is 500GB.
Regards,
Yogesh.

Hi,
First get the backup piece size its trying to allocate for file "/home/oracle/DBBACKUP/Oracle10g1/Full_Backup/DB_Backup_201401128366598241"
= 12839996*16384
= 210370494464/1024/1024/1024
=195.9GB
Its trying to allocate ~196GB for the file.
1. Make sure the RMAN backup piece won’t exceed the O/S permitted filesize limit.
2. But we can restrict the RMAN backup piece using the MAXPIECESIZE option.
You restricted it to 120GB but actual requirement to allocate backup piece file is ~196GB.
I think you need to change the MAXPIECESIZE and give it a try.
Please update if it succeeded or failed.
Thanks & Regards,
Gayu

How to set parameter in rtf template

Hi,
I've created a data model query using a parameter in BI Publisher Enterprise. When I'm showing the data I'm first ask for the parameter value.
Now I want to create a rtf template in BI Publisher Desktop. What do I have to do that the user can set the parameter and then see the result? So how to set the parameter in my query?
Thanks
chrissy

Hey Chrissy... i am realy sorry, i have guided u in the wrong way...
Above which i have explained was about Variable....
To test passing a parameter value, ff you are using the:
XML Publisher Runner – on the Setting tab enter a new line containing:
Name: xslt. InvThresh
Value: 1000
Template Builder
In the config file under <<TEMPLATE_BUILDER_HOME>>/config enter under the Properties section:
<property name="xslt.InvThresh">1000</property>
<xsl:param name="InvThresh" select="0" xdofo:ctx="begin"/>
InvoiceNumber Inovice Amount
Grp: Invoice13222-2 $100.00EFE
Grp: Invoice= <?for-each:G_INVOICE_NUM?><?if:ACCTD_AMT>$InvThresh?>
13222-2 = <?INVOICE_NUM?>
$100.00= <?ACCTD_AMT?>
EFE = <?end if?><?end for-each?>
Hope this will help u out....
sorry for tht .....
Thanks
Praveen Gollu.

Issue with filtering values in Web Template

I am facing a problem with filtering values in Web Template.
I have two queries based on two different data providers. One query is getting data from an Info set and the other from a Remote Cube. I have a single navigational block to filter values for both these queries but the change gets reflected only on the variable of one query. The other reflects no change and shows all the values irrespective of the filter condition.
I have tried the option of setting in the properties of the navigational block, affected data providers as both your data providers.But no effect.
Can a single navigational block be used to filter values on 2 queries which are built on different data providers? If yes, can someone please tell me how it is possible?
Kindly let me know how can I make the changes appear in both the queries?I am using SAP BI 3.5.
Thanks & Regards,
Suchitra

Hi Peng,
Frank also published a fix for 11g R1: http://www.oracle.com/technology/products/jdev/tips/fnimphius/rc_expand_menu_on_mouse_over.html
function showMenu(event){
var adfRichMenu = event.getSource();
adfRichMenu.getPeer().show(null,true);
}This should work.
Luc Bors

Printing report that has a parameter with multiple values crashes jvm

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

I am using BOE XI 4.0 as an unmanaged RAS.
I am able to preview a report that has a string discrete parameter that can have multiple values. If I give it a single value. It previews fine. If I give it an empty string it prints all values which is fine. If I give it two discrete values, it displays just those two.
However, if I try printing the report to a printer:
1 parameter value - prints fine.
2 parameter values - crashes jvm
empty string parameter value - crashes jvm
I would appreciate some direction on how to do this. It works in crystal reports for eclipse.
The test jsp I am using is based off of the samples. The print test jsp is the same as the preview test with the exception of the following code differences.:
preview report.jsp code
// Create a Viewer object
CrystalReportViewer viewer = new CrystalReportViewer();
// Set the report source for the viewer to the ReportClientDocument's report source
viewer.setReportSource(clientDoc.getReportSource());
// Process the http request to view the report
viewer.processHttpRequest(request, response, getServletConfig().getServletContext(), out);
// Dispose of the viewer object
viewer.dispose();
print report jsp code
PrintReportOptions printOptions = new PrintReportOptions();
printOptions.setPrinterName("DELL");
try {
      clientDoc.getPrintOutputController().printReport(printOptions);
} catch (ReportSDKException ex1) {
      System.out.println("Message - " + ex1.getLocalizedMessage());
} catch (Exception ex2) {
      System.out.println("Message - " + ex2.getLocalizedMessage());
clientDoc.close();

Change value parameter in RTF template

Hi
sorry if possible change a value parameter in RTF template?
Thanks in advance for any insights!

Thanks but I already tried it and it works.But if there is a second page with the parameter value rebooting.
For this reason I wanted to reset the parameter value.
Thanks

Setting properties with parameter values in templates

Similar Messages

Maybe you are looking for