Setting the Audit Level to off

Hi,
I had configured the Audit level for a bpel composite to Off with the help of below property in composite.xml and deployed the same.
<property name="bpel.config.auditLevel">Off</property>
The Property also reflects in the SystemMBeanBrowser for the composite but the problem is though the Composite payload is not persisted anymore but the composite tracking instances are still persisted.
As per the Oracle documentation : "Off": No logging is performed. Composite instance tracking and payload details are not collected.
Can someone help or provide pointers why the logging is not off for composite tracking instances ?
Do i need to add something else also in the composite.xml apart from this property ?

Hi,
<property name="bpel.config.inMemoryOptimization">true</property>
<property name="bpel.config.completionPersistPolicy">faulted</property>
are already set but it was not working though.
However, i have found the problem finally :)
The issue was that to prevent the persistence of composite tracking, the audite level has to be set at the composite level and not at the component level
because setting it on component level will only prevent the dehydration of the component and not the references and the services.
Regards,
Anugoonj

Similar Messages

Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off

I am on Oracle 11.1.1.7 BPM suite on W8 64 bit. I can't launch the flow trace and get the error "Unable to get the composite instance for the invocation. This could be because instance has not yet been created or because the audit level for the SOA infra has been set to Off". I have set the audit level to development at the soa-infra>SOA Administration> Common Properties > Audit level set to development and Capture Composite Instance State is Checked.
Can somebody advice.
Thanks

Can you please confirm me the following steps...
Log in to the EM console, Expand soa-infra (soa_server1) , go to the partition where your composite is been deployed, Click on your composite, On the right, click on the dropdown Settings and choose Composite Audit Level. you can choose to set the Audit Level for this composite. If you choose Inherit, it will take the settings to what the server is being set to. Otherwise, we can override it by choosing Off, Production, or Development.
Make sure your setting for that composite is not Off, keep inherit or production or development.
Thanks,
N

Is there a way to set the default level of keyframe easing?

I'm currently using the graph editor to smooth my ease-in / ease-out keyframes with 100% influence. I'm having to adjust the easing of each keyframe individually.
Is there a way to set the default level to 100%, so that I can just select "Easy Ease In" and have it apply without having to go into the graph editor? It would save a lot of time.

No, there's not a way to do that, but it's a good feature request. You can submit feature requests here:
http://www.adobe.com/go/wish

Setting the isolation level in Toplink or in my EJB beans?

Hi,
Seems like you can set the isolation levels in both Toplink and in the deployment descriptor of your ejb project.
What is the recommended place to specify the isolation level settings?
With kind regards.

Hi,
Seems like you can set the isolation levels in both Toplink and in the deployment descriptor of your ejb project.
What is the recommended place to specify the isolation level settings?
With kind regards.

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

beatngu13
I made an account just to "like" your comment and say that you are a god among men.
I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
From the bottom of my heart, thank you!

How to set the isolation level on Entity EJBs

I am using 10.1.3.3 of the OC4J app server.
I am creating an application that uses EJB 2.1.
I am trying to set the isolation levels on the EJBs to either serializable or repeatable read.
When i deploy the EAR file from the OC4J admin console, i can set the isolation level property on the EJB's however when i inspect the orion-ejb-jar.xml file I do not see the isolation level being set. Furthermore, i tried to manually change the isolation setting by editing the orion-ejb-jar.xml and adding the isolation="serialiable" attribute on the entity bean descriptor. I then stopped and restarted the server. I noticed that my change was no longer in the file.
Can someone please let me know how to solve this problem and set the isolation level on Entity EJBs . Thanks

I find it at ejb.pdf from BEA.
          The transaction-isolation stanza can contain the elements shown here:
          <transaction-isolation>
          <isolation-level>Serializable</isolation-level>
          <method>
          <description>...</description>
          <ejb-name>...</ejb-name>
          <method-intf>...</method-intf>
          <method-name>...</method-name>
          <method-params>...</method-params>
          </method>
          </transaction-isolation>
          "Hyun Min" <[email protected]> wrote in message
          news:3c4e7a83$[email protected]..
          > Hi!
          >
          > I have a question.
          > How to set the transaction isolation level using CMT in descriptor?
          >
          > The Isolation level not supported in CMT?
          >
          > Thanks.
          > Hyun Min
          >
          >

Error when setting the JARM level up to 10

Hello,
I would like to improve the performance of our Web Dynpro Application.
I set the JARM-Level up to 10 in order to look in the Web Dynpro Console and search for slow functions etc.
But if I want to deloy my application, I always get the error:
"This compilation unit indirectly references the missing type com.sap.util.monitor.jarm.IMonitor (typically some required class file is referencing a type outside the classpath)"
This error appears in the file "InternalNavigationView.java" (which is generated by the Web Dynpro Code Generator)
I tried to add the import "com.sap.util.monitor.jarm.IMonitor ", but this import doesn't exist.
Does anybody know, how I can fix the problem?
Thanks in advance!

Hi Bettina,
If you are developing your aplication as DC then
1)       expand ur DC
2)       select Used DCs(right click on it)
3)       Add Used DC
4)       In the new window Expand Local Development
5)       Expand SAP_JTECHS
6)       Select com.sap.util.monitor.jarm and click on finish
If it is a project then
1) Right click on your proejct and select properties
2) Select Java Build Path
3) Add External Jars, now select the required jar files which needs added.
Regards,
Jhansi

How do I permanently set the zoom level? I am sick of hacing to "ctrl +" on every page!!

How do I permanently set the zoom level? I am sick of hacing to "ctrl +" on every page!! It is a HUGE waste of time. If I can't do it, then no more FF.

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

Where can I set the log level for the "Inbox log file" ?

From the Siebel 8 Bookshelf, it says :
"To set the level of the Inbox log file for troubleshooting
*In Siebel Tools, set the Log Level for the Inbox log file (Alias = InboxLog) to 5*."
But where exactly in Siebel Tools can I find that Log Level ? Which object does the Siebel bookshelf talk about ?

Hi,
Loglevels are not configured in Siebel Tools. You have to configure them with the siebel client. You can find a parameter at "Administration - Server Configuration / Server / Events"
Search for "Inbox General Log Events". Set this parameter to 5. It think this should help you.
Cheers Andreas

Finding / Setting the Pane Level of a new folder

I have added a new folder to the Business partner form but cannot seem to work out what the Pane Level is for the new folder - how do you do this ?
The folder is showing but I cannot set the pane level or add items to it.
I followed the SDK sample which uses a pane level of 5 for the Order Form but I cannot see where it is set.
Thanks

Ok,
I admit my stupidity here - Panes are a virtual item that you put items on and view in conjunction with clicking a form header .
Fixed my own problem again.

How do i set the expunge option on/off manually through an ldap field...?

I am goign to make 3 class of services and create users accordingly. Depending on the cos i will set the expunge option on/off by default. How do i do this?

You can't
Expunge is something done by the client, not by the server, even the actual action is handled by the server.
Perhaps I'm not understanding what it is you're looking for. Expunge is a specific IMAP command. . .

How do I set the logging level with the plug-in 1.4

I am writing an applet that will be hosted in the plug-in version 1.4. I'd like to set up some logging statements using the java.util.logging API. I have successfully got it to print out log messages, but it is not printing anything below level INFO. How can I set it up to print out log statements at the FINEST level?

If you are using the default logger for logging from the applet, the default log level from the logging.properties file in your JRE lib directory is the place. There is an entry
.level= INFO In this file. You can modify this entry.
This is a a roundabout way of achieving it. since we are modifying the default log level here, it will be used by other java applications as well. I am looking for a better solution.

I need to set the zoom level at 100% so the drop downs on my work site will work. How do I set this?

I go to a web site to turn in my work hours. This site has drop downs to select information. These drop downs will not work. I called the company I work for and they said that the zoom level needs to be set at 100% on Firefox for these to work. I need to know what I have to do to set this. There system uses Adobe Reader, I have the 9.0 version on my computer.

View menu => Zoom => Reset (or Ctrl-0 [zero] ) - but I doubt that's the problem. Eg. zoom in or out on this page and menus work fine.
Could be Adobe versions are out of sync.

Setting the Isolation Level to Read Uncommitted

Hello All,
We are using BO XI r3 and SQL Server 2008. I would like to change the isolation level of the connection to read uncommitted. There are 2 options that i could by Googling..
1. Making changes in the SBO file... this didnt work
2. Making changes in the connectinit... even this didnt work
i am not sure if there is anything else to done... but i tried quering a table with a lock, the report got stuck so i am guessing that the settings didnt work

Hi
this is the only method for changing the transaction isolation level.
Locate the path to your odbc.sbo file
Click the connection in UDT and when server responds Click the Details button
scroll down to the sbo line
That is the file location of your sbo file (this will be the same on client and server)
This change needs to be done, for client and servers both
The isolation can only be set for the global connection. Not per universe.
Locate the file and make a backup before making any changes
Find the Tag
<DataBase Active="Yes" Name="MS SQL Server 2008">
Below that tag should be a "Force SQLExecute" Parameter
Like This
<Parameter Name="Force SQLExecute">Procedures</Parameter>
ADD this line
<Parameter Name="Transaction Isolation Level">READ_UNCOMMITTED</Parameter>
Save the odbc.sbo
After client and server are changed
Restart SIA
Run the webi document again.
Locations of the sbo file:
R2: <Installation Directory>:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\dataAccess\connectionServer\rdbms
R3: <Installation Directory>:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\dataAccess\connectionServer\rdbms
BI4: <Installation Directory>:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\rdbms
To make these changes effect, you have to restart ‘CMS server’, ‘the Connection Servers’, ‘Webi Report Server’ from ‘Central Configuration Manager’ (CCM).
Information is available in the Data Access guide
Jacqueline

Can I set the normalization level in the Bounce dialog?

I want to normalize my tracks to, say, -1db instead of 0db. Is there any way to set the normalize feature in the bounce dialog to do this?

Hi
The Art Of Sound wrote:
Which in turn reduces the dynamic range......
Louder parts get quieter... and quieter parts get louder....
No
Turning the gain up or down to ensure that the peak levels ( or RMS levels) merely turns the whole signal level up or down: no compression or expansion
http://en.wikipedia.org/wiki/Audio_normalization
CCT

Setting the Audit Level to off

Similar Messages

Maybe you are looking for