Setting the Link Group Name in Deep Link based on the value of a column

Using Jdeveloper 11g, Jheadstart 11g
Is it possible to override the link group name in deep linking. For example can I conditionally set that field based on the value of the item.
Regards
Edited by: aliegeh on Jul 25, 2010 8:35 AM
Edited by: aliegeh on Jul 25, 2010 8:43 AM

Thanks for the suggestion.
Here is what I am trying to do:
I have a table with one visible column that has the following entries:
1. Create
2. Modify
3. Verify
4. Approve
5. View
If the user clicks on row 1 (Create) then the link group name should be "CreateEmployees" to create new employees
If the user clicks on row 3 (Verify) then the link group name should be "MaintainEmployees" for verification and so on.
(This is role based and each role will have access to one or more of the rows in the tabler)
It basically mimics a work-flow type of scenario.
I tried to modify the template and looked at the line:
action="$JHS.facesConfigGenerator.addItemGroupLinkTaskFlowCall((${JHS.Current.item})}" but got stuck there.
Is there a way to change "JSH.current.item" in the template to read the group link name from another column say by using #if statements.
One way I also tried was to introduce a column for each action such as CreateAction, VerifyAction etc which kind of agrees with your suggestion but the drawback is the need to modify the table if another task is required.
Regards
Edited by: aliegeh on Jul 25, 2010 8:36 AM
Edited by: aliegeh on Jul 25, 2010 8:42 AM

Similar Messages

Easiest way to know the query group name?

Hello All,
This has been nagging at me for quite some time now. Would appreciate you inputs on the ways to find out the query group name for a set of queries we see on the UI.
The obvious method is to search your query group from the list of query groups that system shows when we navigate to Setup->Queries and Reports->Query Groups. Do we have some other ways as well.
Thanks In Advance
Devesh

Hi Devesh,
If you know the query definition then the easiest way to find the query group would be to use "Search Query Groups by Queries Used" query on the Query Groups list page. This query allows you to select a query definition and returns the query group using the query.
Or you could use "Query Group Review" query on the Query Groups list page. This returns all queries within all Query Groups. You can further refine your search by Query Name or Internal Name of the query you are interested in.
If you want to do a general search for all buy-side list page or buy-side picker page query groups, search for <buylist> and <buypick> respectively.
Hope this helps.
Regards,
Vikram

Query to find the parent group name

what is/are the table name that i should use to find the parent name of the job?
thank you,
warren

Hi Warren,
The parent group name (dbo.jobmst.jobmst_prntname) can be found within jobmst table.
For example, the below query will return parent name of a specified job:
SELECT dbo.jobmst.jobmst_prntname
FROM dbo.jobmst
WHERE dbo.jobmst.jobmst_name = 'Enter name of job here'
BR,
Derrick Au

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the original file name being replaced during the downloading process?

When someone other than myself downloads an image from my web album, a dynamically generated file name replaces the original file name. How I can prevent the file name being changed during this downloading process?

Hi Glenyse,
Here are my steps.
1. I upload multiple image (jpg) files onto my photo album.
2. I select the "sharing" by email option for this album.
3. I enter the recipient's email address.
4. The recipient receives my message and clicks on the link.
5. The recipient accesses my photo album and clicks on one of the images.
6. The image opens up to its own screen.
7. The recipient selects the "download" and then save file option.
Here is the part I do not understand. For some reason, during this "download" process, the original name which I have given to the file is replaced by different name. So I was hoping that someone knows how to prevent the file name from being changed during the "download and save" process.
Much appreciated if you can help me find a solution to this problem.
Mary

An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.

Hi,
So I have 2 PC's and I sign with the same credentials. I have a hard drive which I decided to share. In the setting I created permissions for the user credentials of both vcomputers and have full control access.
Basically, everytime I open my laptop after and it wakes up and try to connect to the network drive, I get the error
An error occurred while reconnecting...The local device name is already in use. The connection has not been restored.
I need to stay disconnecting all drives and reconnecting them. WHen I restart my PC the network drives restore perfectly. I don't understand why it doesnt work on wake.
Any ideas?

It seems that when a machine goes into sleep, the network connection is disconnected, naturally, but the machine still has the connection mapped. If you run the 'net use' you will see the connection. When you try to reconnect it, it sees the
connection and gives you the error.
I do not know if you can directly modify this behavior. However, as a work around, you could build a simple script like:
net use 'connection' /delete ( write it into a text file and save it has a .bat file.)
Use scheduled tasks to have the script run right before the machine goes into sleep. You can do so by setting the task to RUN ON Event: event 42 for the KERNEL_POWER source.
You can see http://superuser.com/questions/679195/run-a-script-when-hibernating-windows-8 for more info .

I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name. How can I restore the names to my recent calls list?

I had to restore my iPhone 4s and now my recent calls show only phone numbers instead of the contact's name. How can I restore the names to my recent calls list?

Are the contact details in your contacts app, the phone app uses the contact app to put names against telephone numbers.

"The iPhone (iPhone name) could not be synced because the connection to the iPhone was reset".

This started yesterday at about 10:30am California time and hasn't stopped or been fixed. Whenever I sync or try to backup my iPhone 5 it goes through the process but right when it's about to finish backing up it gives me an error message that says "The iPhone (iPhone name) could not be synced because the connection to the iPhone was reset"
I have tried using a different USB cable, using a different port on my macbook, restarting both my phone and my computer. And nothing works and I have search through about every search engine and this problem isn't to be found anywhere online. Posting my problem and calling Apple support are my last options. Also I am still running on iOS 6.1.4 and have not updated to iOS7 because I want to be able to have an up-to-date backup file in case anything goes wrong. And I don't want to restore a backup because my last actual backup is from a couple months ago. But another thing I don't quite understand is that even though that message comes up, a couples minutes later my iPhone's summary says the last backup was the current time like it actually DID back it up. So my question is if the error message says that it can't be synced then why does it show that it actually did backup? Please help because I really would like to get rid of this problem so I could backup and sync to update to iOS7.

Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
tt2

Framemaker uses $filename for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen?

Framemaker uses <$filename> for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen? In compiling our books it would be helpful to not have this extension appear as it then requires us to create extra files without them.

See: System Variables

Using Shading Dictionary to perform shading in pdf,before that the shading dictionary call from Pattern Dictionary.In the Pattern Dictionary there is an Matrix based on the matrix value location the shading operatihow the axial shading is preserve in pdf

using Shading Dictionary to perform shading in pdf,before that the shading dictionary call from Pattern Dictionary.In the Pattern Dictionary there is an Matrix based on the matrix value location the shading operation is perform,So i dont know how to calculate value of pattern Dictionary matrix value.
10 0 obj
<< /Type /Pattern
/PatternType 2
/Shading 11 0 R
/Matrix [1.00 .00 .00 1.00 54.00 53.00] // the matrix value how to calculate
>>
11 0 obj
<<
/ColorSpace /DeviceRGB
/Function 12 0 R
/ShadingType 2
/Coords [109.2726 69.00 109.2726 .00]
/Extend [true true]
>>
12 0 obj
<<
/FunctionType 0
/Domain [.00 1.00]
/Range [.00 1.00 .00 1.00 .00 1.00]
/Size [1002]
/BitsPerSample 8
/Length 3006
>>
stream
here is an stream of colors
endstream
endobj
Can anybody help me please.
Regards, Sasi kumar sekar.

Hi, Sasi -
The Matrix maps coordinates in your shading dictionary into User Space. That is, the Matrix entry in the Pattern dictionary specifies a coordinate transformation that will be applied to coordinates specified in the shading dictionary.
To take your example, you have an axial shading extending from (rounding off) 109,69 to 109,0. Your Pattern dictionary specifies the Matrix
[ 1 0 0 1 54 53 ]
This transformation matrix corresponds to a scale of 1,1 (that is, no change in scale) and a translation of 54,53. Thus, the actual endpoints for the axial shading will be the User Space positions 163,122 and 163,53 (assuming I’ve added correctly).
As to what values to use for your Matrix, it depends on how you’ve set up your Shading dictionary. If the coordinates you’ve specified are actually where you want the gradient to go, then just use an identity matrix
[ 1 0 0 1 0 0 ]
By the way, are you sure that the Pattern dictionary includes a Matrix entry? I seem to remember (it's been a while since I've looked at Patterns) that the matrix is supplied as an argument to the makepattern operator:
<<patternDict>> [ 1 0 0 1 0 0 ] makepattern
Hope that helps.
- John Deubert
Acumen Training
PostScript and PDF
Training & Consulting

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the

I Cannot get my organizer to work for Elements 13. "A problem caused the program to stop working correctly. Windows will close the program......" is the error I get. I've uninstalled and reinstalled the program and tried various other things based on the MANY other complaints with this same issue and nothing is working. How can this problem be corrected?

Hi,
Which operating system are you running on?
Are you upgrading from a previous version of Photoshop elements or is this your first?
Are you trying to load the organizer or the editor or do both fail?
Brian

How do I get the Tab Group names to appear above the Tabs?

At one point the names of all my Tab Groups appeared above the Tabs. That is, on every page there's a horizontal list of open Tabs. Above that there used to be a similar looking horizontal list of all Tab Groups. Now that horizontal list of Tab Groups is gone.
This was useful for rearranging and re-categorizing Tabs into different Groups because I could see the whole page for any given Tab, and could move the Tab to a different Tab Group simply by clicking on the Tab and dragging to to any Group in the Tab Groups section above the Tabs section. This was usually easier than rearranging Tabs on the Tab Groups page (accessed by clicking the "Group your tabs" icon at the upper right of the display).
I don't know how this feature got there or why it went away, but I liked it.
How can I get this back?

Tab groups were the primary reason I used Firefox (since the beginning).
Now that they are gone, so am I !!!!!
-- However ... good news! ... they are not gone, just a tiny bit more difficult to manage.
You right click on the tab and select Move To Group. You then create new tab groups within the Tab Group interface. Once you've done that, the familiar Tab Group boxes icon appears in the upper right hand corner of each Group in full display.
Having done it a few times, I can't even remember now what the original method was precisely. But all the functions are still there -- that's the important thing! And I'm still here on Firefox (at least until the next bone-headed crisis....)

Can we rename the log group name in 10g.

I have a database on 10.1.0.5 and want to rename the group name of 4 to 1 without moving the logfiles. ;)
thanks

I have a database on 10.1.0.5 and want to rename the
group name of 4 to 1 without moving the logfiles. ;)What difference does it bring?
I don't think its possible either.

Provide Webservice link not generating corresponding WSDL URL based on the service operation.

Hi All,
The provide webservice link is not generating corresponding WSDL URL based on Service Operation.
E.g. Currently we have two service operations namely Create and Update. We are using Rowset based messaging. Provide Webservice link generated correct WSDL URL for the create operation but it is providing the same URL for Update operation as well. kindly share your knowledge if you guys ever faced similar problem.
Regards
Viswa

Hi Hakan,
Thanks for your reply. Actually i am trying to generate WSDL URLs for each service operation for Travel & Expense module like create expense, update expense etc.
URL generated looks like this : http://xxx.xx.xxx.xx:8011/PSIGW/PeopleSoftServiceListeningConnector/HX_TE_EXPENSE_CLAIM.16.wsdl - this url is meant for CREATE operation. But for the UPDATE operation i am getting the same URL . Normally, Whenever i create WSDL URL for different operation the numeric part of the above URL changes like 16, 17 etc ..based on the service operation but no two operation have same URL like i am getting now. Please provide your knowledge on this issue.
Regards
Viswa

I cannot send or receive group text messages as well as pictures messages / MMS. What should I do? The settings on Messages was set to receive group texts but it does not solve the problem.

I cannot send or receive group text messages and picture messages / MMS. The settings on Messages are already set to receive group texts but it does not help. What should I do?

Wow, 1yerdua. That's far too long to be having this messaging trouble. We want to find the resolution fast! If you turn off your Lumia's WiFi (Menu > Settings > WiFi), are you still able to access data-oriented applications like Internet Explorer? Have you been to other areas of the state/country and experienced the same trouble?
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

HT201287 Can I set up a group message and have myself to be the only one to get responses

I often send group messages about where the group will be going to dinner, or what time an event will be held. I am the only one who needs to get responses to the group message, but everyone in the group gets all responses which is aggravating to most of the group members. Is there a way to send a group message, with me being the only one to receive responses?

Not through the built in Messages app. There may be other group messaging apps that would allow you to do that. However, everyone you message would need to have he same app installed.

Setting the Link Group Name in Deep Link based on the value of a column

Similar Messages

Maybe you are looking for