Setting the property "Cache Level" of the pcd object to "None".

Hi all
I have an EP 6.0 on NW04 SPS 17. I need to solve a problem and found note 960975. My question is, how could we change the setting the property "Cache Level" of the pcd object to "None"? Where should I go? Is it on the NWA, Visual Admin, Configtool or somewhere else?
Many thanks before.
Regards
Agoes
Message was edited by:
Agoes Boedi Poerwanto

Hi Agoes,
By using the tool Support Desk -> Portal Content Directory -> PCD Administration you can do this. Please note that this tool should only be used in debugging situations.
There is a new section "Release a Unit from the cache cluster wide" in this tool. With this new functionality, you can remove an object from the cache on all nodes in the cluster. If the object is still in use, it will be reread immediately from the database
Releasing the entire PCD cache can severely affect performance. Hence, if there are inconsistencies suspected with a single object, e.g. a role or an iview, the new section "Release a Unit from the cache cluster wide" can be used to evict the given object from the cache on all nodes in the cluster.
Cheers,
shyam

Similar Messages

Outputting to tape - setting the right audio level on the camera?

Hey there,
I'm using FCP 4.5 on OS 10.4 on a 1.8gHZ Powermac.
I'm recording a mini-DV tape to be played in a theatre. I think I'm setting the reference tone to around 18dbs. However, I'm outputting the tape through a consumer camera.
My question is, do I have to worry about setting the audio levels on the camera to reflect the reference tone of the sequence (ie the basic sound level of the sequence)? I'm not sure the camera even has that function - is it more something that needs attention on a pro deck?
Any advice here would be much appreciated!
Best
Richard O'Sullivan
UK

In your scenario, the only thing you have to worry about during recording is that your audio level is below 0 dB (-12 dB is always a good level). Anything above 0 dB is pretty much unusable.
If in doubt, its always better to record softer than louder.
-Alexi

The Property Inspector is missing the V Space and H Space fields in DW6 - where did they go?

I just downloaded DW6. The Property Inspector is missing the V Space and H Space fields, therefore I am unable to add space around my images. Suggestions?

It is no longer available because the problem with that was that it applied spaces around the image rather than where the user actually wanted them. You now need to use CSS and apply margins and paddings and target exactly where you want them by using something like this:
img {
    margin-bottom: 0;
    margin-right: 0;
    margin-left: 0;
    margin-top: 0;
    padding-top: 0;
    padding-right: 0;
    padding-bottom: 0;
    padding-left: 0;
img {
     border: 0;
     padding: 0;
The second style is generic to set margin and padding for all four sides.
Good luck.

The SharePoint Server Publishing Infrastructure feature must be activated at the site collection level before the Publishing feature can be activated.

Hi All,
I am trying to activate the Publishing feature for a SharePoint website using a custom Site Definition File. The problem I am getting
is when I try to use the custom site template I get an error message:
New-SPSite : The SharePoint Server Publishing Infrastructure feature must be activated at the site collection level before the Publishing feature can be activated.
The custom
Site Definition File snippet is show below:
<?xml
version="1.0"
encoding="utf-8"?>
<Project
Title="SiteDefinition1"
Revision="2"
ListDir=""
xmlns:ows="Microsoft
SharePoint"
xmlns="http://schemas.microsoft.com/sharepoint/">
<NavBars>
</NavBars>
<Configurations>
    <Configuration
ID="0"
Name="SiteDefinitionDelegateControls2">
      <Lists/>
      <SiteFeatures>
        
        <Feature
ID="{3bae86a2-776d-499d-9db8-fa4cdc7884f8}"
Name="FeatureDefinition/15/3bae86a2-776d-499d-9db8-fa4cdc7884f8"
/>
        
        <Feature
ID="{a392da98-270b-4e85-9769-04c0fde267aa}"
Name="FeatureDefinition/15/a392da98-270b-4e85-9769-04c0fde267aa"
/>
      ...Other Site Features
      </SiteFeatures>
     <WebFeatures>
        
     <Feature
ID="{94c94ca6-b32f-4da9-a9e3-1f3d343d7ecb}"
Name="FeatureDefinition/15/94c94ca6-b32f-4da9-a9e3-1f3d343d7ecb"/>
     ... Other Web Features
      </WebFeatures>
      <Modules>
        <Module
Name="DefaultBlank"
/>
      </Modules>
    </Configuration>
</Configurations>
<Modules>
    <Module
Name="DefaultBlank"
Url=""
Path="">
      <File
Url="default.aspx">
      </File>
    </Module>
</Modules>
</Project>
I hope you can help
Colin

As the error says. The Publishing Infrastructure feature must be activated at the Site Collection level where you are creating a new site PRIOR to turning on the Publishing feature. So if you are trying to use this site definition to create a
new Site Collection then its not going to work. If you are trying to create a sub site then make sure that Publishing Infrastructure is enabled in the site collection before trying to create a sub site with this site definition.
Internally Microsoft does this for the Publishing Portals using custom code. Here's an article that discusses how to do it in SharePoint 2010.
http://msdn.microsoft.com/en-us/library/office/gg615465(v=office.14).aspx
Compare what's in the article to one of the Publishing templates available out of the box in 2013 and you should be able to find the assembly that is used to load the Publishing features.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Infoset query of vendor payments at the cost distribution level of the document

We would like an infoset query of vendor payments at the cost distribution level of the document. The issue seems to be joining vendor to the document cost distribution lines.
1.) BSAK + BSIK can be combined with an infoset data structure but only contain the vendor line of a document; the cost distribution lines are not in the tables.
2.) BSIS + BSAS can be combined with an infoset data structure but lack vendor data and joins (to a vendor source) are not an option with data structures. Vendor data added with an additional field is too slow to be a primary selection field.
3.) Logical data base KDF in an infoset returns only the vendor line of a document, not the cost distribution lines.
4.) Logical data base BRM in an infoset can have vendor from BSAK/BSIK attached by an additional field but performance is too slow to be useful. Joins are not an option in a logical data base infoset.
5.) Complete data is lacking when table joins between document cost distribution tables and vendor data tables are possible, (SPL actual line item table & BSIP or FMIFIHD & FMIFIIT). BSIP lacks AB documents (reversals). FM tables lack general ledger only documents.
6.) BSAK and BSIK together have complete vendor data but joins of both to a basis table are not an option. Left outer joins are too slow, inner joins won’t work since the tables have mutually exclusive data.
Does anyone know of any other options?

Hi,
This is SAP Business one reporting and printing forum. Please find correct forum and repost above discussion to get quick response.
Please close this thread here with helpful answer.
Thanks & Regards,
Nagarajan

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my p

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?

You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

How to determine the current update level of the system

How can we determine the current update level of the system. uname -a shows the release but how to obtain the update level through a program?
I have this sample program to display the version
#include <iostream>
#include <sys/utsname.h>
#include <dirent.h>
using namespace std;
int main()
struct utsname osinfo;
// Call uname to get system info, then extract strings.
uname(&osinfo);
if (osinfo.machine) {
    cout<<" Machine : "<< osinfo.machine;
if (osinfo.sysname) {
    cout << "\nOS Name : " << osinfo.sysname;
if (osinfo.release[0] != '\0') {
    cout<<"\nRelease : " << osinfo.release;
}My aim is to check if the Solaris box is 5.10 update 4 or not.
Edited by: nidhish9 on Nov 27, 2007 5:11 AM

nidhish9 wrote:
How can we determine the current update level of the system. uname -a shows the release but how to obtain the update level through a program?
I have this sample program to display the version
#include <iostream>
#include <sys/utsname.h>
#include <dirent.h>
using namespace std;
int main()
struct utsname osinfo;
// Call uname to get system info, then extract strings.
uname(&osinfo);
if (osinfo.machine) {
cout<<" Machine : "<< osinfo.machine;
if (osinfo.sysname) {
cout << "\nOS Name : " << osinfo.sysname;
if (osinfo.release[0] != '\0') {
cout<<"\nRelease : " << osinfo.release;
}My aim is to check if the Solaris box is 5.10 update 4 or not.
Edited by: nidhish9 on Nov 27, 2007 5:11 AMIt's in /etc/release...
essapd020-u004$ cat /etc/release
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
           Copyright 2007 Sun Microsystems, Inc. All Rights Reserved.
                        Use is subject to license terms.
                            Assembled 16 August 2007
essapd020-u004$ It can be processed with some simple commands:
essapd020-u004$ cat /etc/release | head -1
                       Solaris 10 8/07 s10s_u4wos_12b SPARC
essapd020-u004$ cat /etc/release | head -1 | cut -f2 -d_ | cut -c1,2
u4
essapd020-u004$ Best,

Authority Check at the T.Code level for the user in particular User Group

Hi Friends,
I have created a ZREPORT and assigned this report to a ZTRANSACTION CODE.
Need to give Authority Check at the T.Code level for the user in particular User Group.
I have searched in SCN, but not get suitable pages.
How to solve this?
Regards,
Viji.

Hi Viji.
Saha way is actual way for authority tcode but user authority in TCODE:- SE38 he/she can run report(ZREPORT) wise program is run is no authority check.
Another way is you have also check authority in program level.
DATA: T_ROLE_USERS TYPE STR_AGRS OCCURS 0 WITH HEADER LINE.
   INITIALIZATION.
CALL FUNCTION 'ESS_USERS_OF_ROLE_GET'
    EXPORTING
      ROLE       = 'ZROLE'' " Role define
    TABLES
      ROLE_USERS = T_ROLE_USERS.
READ TABLE T_ROLE_USERS WITH KEY UNAME = SY-UNAME.
   IF SY-SUBRC NE 0.
   RETURN.
   ENDIF.
Thanks & Regards
Rahul

How to get the Minum Grade level from the view cluster table V_T710CL_B

Hi Guys,
I want to fetch the Minum Grade level from the view cluster table V_T710CL_B
kindly help me
Regards
Rusidar.

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

When I open Bridge Master Collection CS6, I get the message: There was a mistake in Bridge, therefor the cache cannot be read. Try to erase the central cache to solve the problem.

When I open Bridge Master Collection CS6, I get the message: There was a mistake in Bridge, therefor the cache cannot be read. Try to erase the central cache to solve the problem. The solutions given by Adobe don't help me. Does anyone have another solution....????
Als ik Bridge open krijg ik een venster te zien met de boodschap: Er is een fout opgetreden in Bridge waardoor de cache niet kan worden gelezen. Probeer de centrale cache te wissen in de cachevoorkeuren om de situatie op te lossen. De oplossingen van Adobe verhelpen het probleem niet, heeft iemand anders een oplossing .....????
Alvast bedankt. Jaap Wals.

When launching Bridge, press and hold down Command-Option (Mac) or Control-Alt (Win) + Shift to choose “Reset Preferences”, Purge Entire Thumbnail Cache”, and/or Reset Standard Workspaces”.

[HELP] Error creating property: file. Please verify the Property size is within the Repository limits.

I am using portal 8.1
was trying to upload a file (.doc) to the repository, and encountered such error.
com.bea.content.RepositoryRuntimeException: Error creating property: file. Please
verify the Property size is within the Repository limits.
TIA

Hi,
hopefully this may help towards a solution.
Are you using the Loader EJB ?
1) Are you publishing to a root node within the "BEA repository" ?
-> does this work ?
Do you have code that reads something like:
loader.loadDirectory("firstNode");
loader.loadFile("firstNode", myBinaryValue, myBytes, myProperties);
-> Having banged our heads off a lot of walls on this, we think that it is only when you try to publish to a sub-node within the repository that problems appear.
2) Try publishing to a sub-node in this manner:
loader.loadDirectory("firstNode/secondNode"); // Ensure exist in Repository
String contentNodeName = "firstNode/secondNode/myContentNode");
loader.loadFile(contentNodeName, myBinaryValue, myBytes, myProperties);
--- Drop us a line as well as replying to this group (as I don't check daily etc). Myself and a collegue, Niamh Fitzpatrick, have been looking at this. Thanks Niamh.
Hopefully this will work.

When I downloaded 6 I lost the "Empty Cache" function. The "Reset" function is still the same, though. How do I get the empty cache back?

When I downloaded Safari 6 I lost the "Empty Cache" function. The Reset function is still the same as 5.7. How do I get the empty cache back?

Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Best.

What is the difference between the library cache pin and the library ...?

What is the difference between the library cache pin and the library cache lock ?
What is the relation between them?

Jonathan Lewis has a nice summary of these two items:
{message:id=2079008}

I have selected 'Show on edit details page' for the property 'Status Message' for the User Profile Service, yet i do not see the property.

I would like to have the ability for the user to edit the property 'Status Message'. In the properties it says that it should be available in the details section however I am not seeing it there. Does anyone know if I might have something set
incorrectly or is this expected behavior.
Steven Albrecht
University of Colorado Denver
Steven Albrecht

Hi Steven,
For this issue, I'm trying to involve someone familiar with this topic to further
look at it.
Thanks,
Eric Tao
TechNet Community Support

What is the oldest release level of the option for "TRANSFER" ?

Dear all,
We have to use the option "LENGTH" and "NO END OF LINE" of TRANSFER. Because big one record text file output is required.
But we have the problem on compiling. We can compile the program under environment (a) but not (b).
(a) SAP_ABA release 620 level 0062
(b) SAP_ABA release 620 level 0044
What is the oldest release level that enable to use this option ?
vvvvvvvvvvvvvvvvvvvv^
Toshio Kawamura
Ryoka Systems Inc.

Snow Leopard, 10.6.3 or later, will support iLife 11, at least for iPhoto up to 9.2.3. You would need to purchase a copy of the iLife 11 disk from a 3rd party retailer and update the iPhoto 9.0 to 9.1, 9.2 and then 9.2.3 thru the Apple Downloads site: iPhoto 9.1
OT

Setting the property "Cache Level" of the pcd object to "None".

Similar Messages

Maybe you are looking for