Setting time limit on running report

Does anyone know if you can set a time limit on a report? I want a report to be canceled if it runs for more than 30 minutes. I see that you have the option in the Queue Manager when creating a job, but I want it to happen for my web-based reports...

You can count the numer of times something occurs and use that as a condition to stop things.  How you go about stopping things depends on how your animation is set up.  If it is a straight timeline animation, you would just use a stop(); command.

Similar Messages

  • Exceeded time limit in running   CALL FUNCTION 'BAPI_COSTCENTERGROUP_CREATE

    Hello all,
    Please may I ask your help in creating cost center group.
    I used BAPI COSTCENTERGROUP_CREATE, everything is ok except that when I run the program it dumps because the time it process is exceed the time limit. It's my first time to work with BAPI.
    This is urgent.
    Please help and advice me what to do.
    I'll give the highest points.
    THANK YOU SO MUCH. God bless.

    Hi chenara ,
    I did'nt  use this bapi before but this is what i would do :
    1. put  a break-point just before enter the bapi and try to see
       what is the problem , ( look at what you send to the bapi ,
      go with F5 inside and try to see where it is stuck ) ,
      i know it is hard to debug sap bapi but sometimes it helps.
    2. go to the basis team , they can help you to monitor
       what take the most time.
    i hope this could help you.
    Lilach Menashe.

  • Set time limit

    I have looked under the settings->general->restrictions for a way to set time limits for games (Ipad 2 running 4.3) without much luck.
    I have also google'd the question and the the best I've found is an app (timer) with mixed reviews.
    Any suggestions out there?  (I am trying to set time limits for my kids)

    Make a suggestion to Apple:
    https://www.apple.com/feedback/ipodtouch.html
    Have yo looked at this app? It is a subscription app after a 30 day trial.
    ParentKit - Parental Controls for iOS
    Also see:
    time of day restriction for ipod touch: Apple Support Communities

  • Do we have any option to set time limit for report execution

    Hi Experts,
    Please Could any one clarify is there atime  limit to set  for report execution and if it crosses the limit it wud not display a data,
    Thanks in advance
    Nitya

    Hi,
    Basis should be help you in timeout settings on various cases. Time out setting while execution from portal is there.
    Regards,
    Akshay

  • Time limit between running a job?

    A little background - I'm trying to create a trigger that logs all logins to a table. While testing, I noticed that if I deleted the table the trigger was trying to call then I could not log on because the trigger would fail. This would cause me to have
    to start SQL in single-user mode with -f parameter, and then use SQLCMD to connect then delete the trigger.
    I wanted to fix the trigger so that this would not happen. Here's what I did...
    Created a table msdb.MySchema.LogonHistory.
    and a trigger...
    CREATE TRIGGER [Tr_ServerLogon]
    ON ALL SERVER WITH EXECUTE AS 'sa'
    FOR LOGON
    AS
    BEGIN
    IF OBJECT_ID('msdb.MySchema.LogonHistory', 'U') IS NOT NULL
        BEGIN
            INSERT INTO msdb.MySchema.LogonHistory
            (DBUser, AppName, LogonTime, SystemUser)
            VALUES(USER, APP_NAME(), GETDATE(), ORIGINAL_LOGIN())
        END
    END
    This worked perfectly. If I deleted the table people could still log in.
    I wanted to expand to add an ELSE statement to send an e-mail if the table didn't exist.Problem is, I received an e-mail for EVERY connection. Simply logging in to Management Studio adds 5-6 rows to my LogonHistory table. Here's the ELSE statement I added:
    ELSE
        BEGIN
            EXEC msdb.dbo.sp_send_dbmail @profile_name = "DBMail", @recipients = '[email protected]', @subject = 'Your table doesnt exist', @body='Error'
        END
    I was thinking instead of executing sp_send_dbmail I could a job with that in it. The question is can I limit the job to run only once every hour? Or is there something else I could do within the trigger? I was thinking I could check send_request_date in
    sysmail_mailitems where subject = 'Your table doesnt exist' and compare the send_request_date to the current GETDATE() and only e-mail if it's greater than 1 hour difference.
    Just want to make sure there's not something easier/obvious that I'm missing.

    Yep.. You can configure the job to be executed once every hour. For that just go to job properties -> Schedules tab. Create a new schedule as below
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Setting time for Time Machine backup to run

    Is it possible to set Time Machine to run at a particular time of day? It always seems to start a backup at about 10:00 pm when I'm right in the middle of working on something. Seems to be sort of useless to perform a backup WHILE changes are being made. I'd like to set it to run at like 3:30 am, when necessary.
    Is there a way to do that?
    Thanks!

    check out _*Time Machine Editor*_.

  • Page cannot be displayed while  running report in OAS (10.1.2.3)form/report

    Hi All,
    I have a report which take 4 hrs time to execute the report
    If i run this 4 hrs report,the report runs sucessfully when we see in particular
    report server in application server.
    But, we wont get any pop up to open report after executing sucessfully
    at user end, A error message is displayed in only report param page like,
    "The page cannot be displayed"
    I Think only param page is expired but not form session.
    We have also set the parameters like in report/conf/repsername.conf
    engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
    Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
    we have set "maxBlockTime" for long running report (4h)
    <init-param>
    <param-name>maxBlockTime</param-name>
    <param-value>12600000</param-value>
    </init-param>
    Please help me out to solve this issue.
    Regards
    Kirana

    I am facing a similar problem. Did you find a solution to this problem?
    Thanks
    Karnail

  • How to make an exception to RDS session Idle Time Limit?

    A little bit of background:
    We are running WYSE Thin Clients to connect to a RDS server farm at our company. We have set the Idle Session Time Limit to 12 hours, in Remote Desktop Session Host Configuration (in Connection --> Properties --> Sessions tab). This limit
    is a site requirement.
    The issue: We would like to configure a few accounts to stay logged into the RDS server indefinitely, past the 12 hour limit. How can we do this without changing the time limit for everyone?
    I have tried a script to simulate mouse movements/key presses at intervals on the client session to trick RDS, but Remote Desktop Service Manager does not show that the script affects the idle time for that client. Is there another automatic way to simulate
    user input to keep the client session active? What kind of hardware interrupt is RDS hooking into to determine that a human input has been pressed? A script would be the least intrusive to our infrastructure so if it is possible this is definitely preferred.
    I've heard that Group Policy may be a solution here - but our local IT department do not have admin access to the Domain Controller for our site, it is managed by a third party. However, if I were to solve this using group policy, what would be the
    steps? I would appreciate a step-by-step walk through if it is possible. We would have hundreds of users that need the 12 hour limit applied, and only a few that needs the infinite logon - so please keep practicality in mind.
    Thanks in advance to anyone who helps.

    Hi,
    Thank you for posting in Windows Server Forum.
    In your case, I would like to suggest the steps for you. Yes, you need to take this successful via group policy. 
    You can create 2 group: Just for reference: 
    Group 1- MinLoginTime  
    Group 2-MaxLoginTime
    Add the required users to particular group. 
    Users upto 12Hrs- MinLoginTime
    Users above 12 Hrs- MaxLoginTime
    Now need to apply group policy setting on this required groups. 
    Group 1- MinLoginTime: 
    Set time limit for active but idle Remote Desktop Services sessions-
    Enable -Set 12 Hrs
    End Session when time limits are reached- Enable
    This is because it will disconnect the session of your users who reached to 12 hrs.
    Group 2-MaxLoginTime: 
    Set time limit for active but idle Remote Desktop Services sessions-
    Not configured\Disable
    If you disable or do not configure this policy setting, this policy setting is not specified at the Group Policy level. By default, Remote Desktop Services allows sessions to remain active for an unlimited amount of time. 
    You can find the above setting option under below mention path.
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
    User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
    Note: These Group Policy settings will take precedence over the settings configured in Remote Desktop Session Host Configuration. If both the Computer Configuration and the User Configuration policy settings are configured, the Computer Configuration policy
    settings take precedence.
    More information:
    Configure Timeout and Reconnection Settings for Remote Desktop Services Sessions
    http://technet.microsoft.com/en-us/library/cc754272.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Parameter Page Displays "Page Cannot Be Displayed" while running report

    Hi All,
    I have a report which take 4 hrs time to execute the report
    If i run this 4 hrs report,the report runs sucessfully when we see in particular
    report server in application server.
    But, we wont get any pop up to open report after executing sucessfully
    at user end, A error message is displayed in only report param page like,
    "The page cannot be displayed"
    I Think only param page is expired but not form session.
    We have also set the parameters like in report/conf/repsername.conf
    engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
    Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
    we have set "maxBlockTime" for long running report (4h)
    <init-param>
    <param-name>maxBlockTime</param-name>
    <param-value>12600000</param-value>
    </init-param>
    Please help me out to solve this issue.
    Regards
    Nagaraj

    Parameter Page Displays "Page Cannot Be Displayed" while running report

  • Recording time limit on QuickTime?

    Using Mountain Lion's bundled (out-of-the-box; free) version of QuickTime, is there a set time limit to a single screen capture recording?
    Specifically, I want to press record and have it screen record 30 to 60 mins of continuos video. Is this possible as long as I have plenty of hard drive space?

    Nice! That's exactly what I needed to know.
    Yes, basically I want to capture just a portion of the screen (web-cam live feed) for 45+ mins. (no, not pr0n)
    Any idea what the min per MB rate of capture is?

  • RemoteApp Session Time Limit

    Hi,
    I'm a Windows Server 2008 R2 user. 
    I'm looking to terminate a remoteApp session that is left idle.
    I have already change the "Set Time Limit for Active but idle Remote Desktop Services Session to 1 minute" and i have also enabled "Terminate Session When time limits are reached" for both Computer Congfiguration and User Configuration. 
    Other Session Time Limits options are not configured. 
    After doing so, i did type gpupdate in the command prompt. 
    But whatever changes i make, doesn't have any effect on the RemoteApp. 
    Please to help to advice,
    Thanks,
    Jvarman

    Hi,
    Thank you for your post in Windows Server Forum.
    As you have already configure Session Time Limit group policy, you need to apply other group policy related to RemoteApp that is “Set time limit for logoff of RemoteApp sessions”. You can specify the time limit for RemoteApp to disconnect.
    The setting is under the same path which you have provided for Session Time limit. 
    Note: We recommend that you set other session limit policy settings that end the session to a time limit that is higher than the RemoteApp logoff delay policy setting. If this is not the case, there is a possibility for conflict.
    More information:
    Terminal Services RemoteApp Session Termination Logic
    http://blogs.msdn.com/b/rds/archive/2007/09/28/terminal-services-remoteapp-session-termination-logic.aspx
    Hope it helps!
    Thanks,
    Dharmesh

  • How do I set time limits for my iphone?

    You know how there are parental controls on the macs in the settings. In there you can set up time limits of how long you can use the computer for but I can't find it on the iphone where you can set time limits for use. I looked at the restrictions sections but I don't see anything on setting time limit. How could I set time limits for use on my phone? I go on my phone too much and I really have to set restrictions to limit my time on it.

    There are apps you can download i believe to do this.
    https://itunes.apple.com/us/app/parental-timelock-time-limit/id689577280?mt=8
    for example

  • Time Limit exceeded error in ALV report

    I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.

    You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
    You may need to re-check your query...And also, review the alv catalog and any events you are using....
    Greetings,
    Blag.

  • FBL3N report showing dump 'Time limit exceeded'

    Hi experts,
    We are running report FBL3N ( G/L Account Line item display) for all GL accounts for financial Year 2008-2009( Posting date 01.04.2008 to 31.03.2009 ).The report is showing short dump( Time limit is exceeded ). Even for one month, we are getting the same error.
    We would like to know the best practice to run the standard reports for longer periods with out getting dump.
    Thanks in Advance.
    Regards,
    Farhanaz.

    Hi
    See Note 1135916 - Line items: Help for analysis for long runtime
    I hope this helps you
    Regards
    Eduardo

  • Error - Object variable or with block variable not set while running report

    Hi,
    I am trying to run BEx reports through portal.
    However I am not able to run any report. I am getting following error.
    "Run time error '91':
    Object variable or with block variable not set"
    This is not BEx installation or excel issue as I am not able to run reports using someone else's desktop also.
    Also I have authorization to those reports. So doesn't seem to be authorization issue.
    Please help me to resolve this problem.
    Thank you in advance.
    Regards,
    Deepti Jain.

    Hi Deepti,
    Can i knw how you solved this issue?
    Regards,
    Maili

Maybe you are looking for