Setting up a Digital Signature

Hi all.  I have Adobe Acrobat X, and I'm trying to set up a digital signature with a graphic.  The graphic is actually a signature that is scanned. The problem is when I create the digital signature graphic, the graphic signature is very small and almost unreadable. 
How can I make it so the graphic signature is larger?
Thanks

Moved to Acrobat Security & Digital Signatures forum: http://forums.adobe.com/community/acrobat/security_%26_digital_signatures?view=discussions

Similar Messages

  • How to set up the digital signature for xi server

    dear all,
    these days i need to implement a interface using the digital signature technology to enable it's security transition.
    we are going to use the digest sign with partner.
    Could anyone of you tell me the detailed steps concerning the seting up at xi server for this pupose ?
    Thanks a lot !

    This is a really urgent request,
    does anyone have the experience on this, please give me some hints ,thanks !!
    BR
    ZhouHui

  • Save method for digital signatures

    Hi - I have several thousand forms all set up for digital signatures, which I use for locking down the form fields (render read-only). This works fine. The problem I have is that when a user digitally signs the form, they automatically get asked to Save As - with a default location on the local machine. Can this be changed to allow the user to simply save and overwrite the form in its original location. Of course there is a danger with doing this, but users with document/case management systems do not necessaritly know where to save the document, so basically they want to open up the form from their CMS/DMS, complete it, digitally sign it and simply save (automatically back in the location they launched it from.
    Does anyone know where I can even look - I have trawled the registry, the digital signature settings, etc, but no luck.

    Hi - these are all reader extended through Livecycle ES Reader extensions and are signed by users in Reader. What I am asking is if anyone has an idea where this behaviour is declared, so that I can change it.

  • Digital Signature tool to Embed Approver signature on PDF Original Files

    Hi,
    Good Day...!
    We have implemented SAP DMS and configured workflow for DMS. When it reaches certain status workflow will be triggered and send workitem to the Approver. If approver can approve or reject based on his review on the original document. If he approves DIR will directly go to released status. Once Approver approves Digital signature has to popup and it has to embed approvers signature on the Original file.
    Is there any third party tools available in the market or can any body provide some inputs how to achieve.
    Please share your experience, if anybody has implemented the same.
    All original files we are using will be in PDF format.
    Note: Our requirement is Approver's signature has to embed on to the Original file when he approves the document.
    Thanks & Regards,
    Prasad.

    Hi,
    Please find details on digital signature in DMS
    Prerequisite
    1)You must have Authorization object {}C_SIGN_BGR to be set (ask basis team to do the same) for the digital signature.
    2)Following  are the authorization object for Documents (If you have all access to the authorization object will be very good, mainly a & b must).
    a) C_DRAW_TCD
    b) C_DRAW_TCS
    c) C_DRAW_STA
    d) C_DRAW_BGR
    e) C_DRAW_DOK
    f) C_DRAD_OBJ
    How to config for Digital Signature in DMS
    The required settings are made under
           a)Document Management ->Approval?->Define individual Signature .
           b)Document Management ->Approval?->Define Signature strategy .
    2.   Assign a signature strategy to the document status .
    3.   Also the required settings are made in customizing under
          Document Management - Control data - Define Document Types (DC10) - Define document status.
         Assign a signature strategy to the document status (As per point no.1 in sign start).
    4.  Save the changes.
    5.  Create DIR
    6.  In DIR once the Document status is set for required digital signature, the system informs you that a digital signature is required. Yellow warning will come, enter two times.
    7.  The Digital Signature dialog box appears. Enter your comment in the text field. Select the individual signature that is assigned to your authorization group in the Signatures to be              executed section and enter the password .Then save it again.6) you can see this digital signaure again, in cv03n, go to top menu Environment --> digital signature.  You will get all the details. 
    Thus the Digital signature process has been completed.
    With help of Transaction code SU01 ,in user tab enter your user name and press F7 check first and last name if it is correct its well and good or else go to change mode and enter correct one, save it.Because while making digital signature using user ID and password it is must or else it will give an error.
    Additionally check the help link for more details.
    http://help.sap.com/saphelp_470/helpdata/en/83/acd928db1c11d397d3080009c17b92/content.htm
    Regards,
    Deepak Kori

  • Digital signature verbiage

    How do I remove the digital signature verbage to the right of the signature but leave the signature.  In other words, I just want the signature there and nothing else.

    When you set up a digital signature appearance you can customize what appears. Exactly how you do this depends on what version of Acrobat/Reader you're using:
    Acrobat 9: Edit > Preferences > Security > Digital Signatures > Appearance > Edit
    Acrobat/Reader 11: Edit > Preferences > Signatures > Digital Signatures > Creation & Appearance > More > Appearances > Edit
    Once you've set up an appearance, you can select it from the list when signing.

  • Digital signature password

    I recently set up my digital signature but when I tried to use it my password was not recognized or did not match. How can I set up or reset the password?

    Hi,
    Just so I get the big picture, you used Acrobat or Reader to create a digital ID, saved the digital ID to a file, and now you are trying to use that digital ID to create a digital signature, but as part of the signature creation process when you type the password into the Sign Document dialog (in the Password field) you are getting the incorrect password alert dialog?
    Is that correct?
    Thanks,
    Steve

  • DMS & Workflow - Handling Digital Signatures

    Hello,
    I have set up a DMS status network, and I'm controlling this network using workflow.
    My workflow listens to "DRAW" for changes, and when a particular status is seen,
    workflow starts.
    This workflow sends out work items to several users, prompting them to review.
    At this point, users can go into the DIR from their Inbox, and either select Approve or Reject Status.
    Both Approve and Reject status are set up to require a Digital Signature.  Workflow controls moving the status back to a "ready" state for the next reviewer.  It also keeps track of the number of reviewers, in order to know when all reviews are done.
    When everyone behaves in timely manner, this works great.  Workflow has no issue with setting DMS statuses - in most cases.
    However, I also have deadline monitoring set up on my workflow.  After 3 days pass with no action, I want to "auto-reject".  System id WF-BATCH is what I use to set statuses through workflow, and this works fine in most cases. However since the status "Approve" and "Reject" are set to require digital signatures, this system initiated status change FAILS.  The system does not provide a digital signature for itself.
    My question is - is this possible through configuration - to set it up in some way that a system ID can promote to a status and either pass a password or simply not require a digital signature?
    My network is kind of stuck at this point because one of the 2 statuses MUST be selected for it to proceed.
    Edited by: Bill Bessette on Jul 24, 2008 9:40 PM

    Hello Niranjan,
    That's an interesting suggestion... I'll investigate.  Any additional detail you can provide on how to implement this User/Pwd hard coding in WF would be appreciated.
    In the meantime, here is some additional info.
    Imagine a status network as follows:
    Draft
    Initiate Workflow
    In Review - Reject/Approve
    Active
    Document starts in draft.  The author selects a status of (Initiate Workflow) at which point the workflow starts.
    Workflow moves the status from (Initiate Workflow) to (In Review)
    and puts a work item in the reviewers mailbox. Reviewers can change the status to (Reject) or (Approve) and each requires a digital signature.  After each reject/approve, Workflow moves the status back to (In Review) so that the next person may act.  When everyone has reviewed and approved, workflow moves the status to (Active).  If anyone has rejected, workflow moves the status back to (Draft.)
    This is a simplification, but that's the scenario.  WF-BATCH is our workflow ID that has SAP-ALL authorization.  Problem occurs when deadline monitoring is in effect.  If a reviewer doesn't act within the designated deadline, the monitor fires and the work item is flagged as obsolete.  Due to the status network, the only valid path is to either move to (Approve) or (Reject).  But since both of those statuses have been set up to require digital signature, they fail.  We end up stuck in (In Review) with no way out.
    If hard coding the userid WF-BATCH and the password in some table will solve this problem, then we'd be thrilled.
    Bill
    Edited by: Bill Bessette on Jul 25, 2008 6:00 PM

  • Digital Signature in Quality Notification

    All,
    I am getting the following Information message  while trying to perform the Digital Signature for the quality notification
    No signatures exist for the header of the notification 2000000091
    I have activated the OPS functions using SFW5 and done the configuration for 'Specify Digital Signature' in configuration for the Quality Notification. Kindly let me know why this error occurs.
    Thanks in advance

    Hi all,
    Just addining some more details to my previous post.
    I have a problem with standard Digital Signature for Quality notifications. I'm talking about standard function from EHP 3 and higher where DS is available in IMG customizing.
    All settings I know seems to be correct but still it does not work.
    Here is what I set up (or was there already):
    - new standard function in IMG was activated by basis
    - configured SSF and PSE digital signature in STRUST  with SAPSECULIB, no errors
    - access to object C_SIGN_BGR is provided in authorization role
    - user SSF settings done in SU01 - SSF ID & profile name from STRUST application parameters, RFC destination SAP_SSFATGUI --> but I found that this is not really necesarry to maintain when using signature with user ID and password, or is it?
    - check programs SSF01 & SSF02 shows no errors
    - System statuses DSAC and DSCL added as allowed for other notification statuses in BS22
    - configured Signature Strategy with standard authorization group 00000001, and standard individual signature 00000001. Signature method is R Sap user and password.
    - configured step "Specify Digital Signature" for Quality notification (under QM->Notifications->Processing. Standard type F2, few business transactions like PMM2 (put in process) or PMM4 (close) . Assigned strategy created in previos step.
    Now, even after above custimizing is done, still the Digital Signature in QN does not work. According to documentation, after setting up "Specify Digital Signature" for Quality notification, system status DSAC should be assigned. In fact in my case it is not.
    I guess I've missed some steps - do any of you have any idea what to do?
    Thanks a lot in advance and br,
    Bartek

  • How do I remove a digital signature from Adobe Acrobat Pro.  I have set it up wrongly.

    I created a digital signature but I wanted to change the signature and it also was not password protected. So I deleted the signature but cannot delete the certificate to set it up again.
    Mac OS X (Operating System)
    So I am unable to delete the digital signature in Acrobat Xi pro.
    I did the following: Adobe | Preferences | Signatures | Creation and Appearance Preferences and deleted the signature. But Adobe | Preferences | Signatures | Digittal ID and Trusted Certificate Settings, does not want to delete.
    Tank you.

    It's not clear to me what you're trying to accomplish. If you get rid of your digital ID you will still be prompted to create/add one when you need to sign a form, which you say you still need to do? Do you really just want to e-sign (hand-drawn signature, or stamp) instead of digitally sign? Do the forms you're using have digital signature fields?

  • How do I set up digital signature with a common access card?

    I am running a Linux machine, and am trying to set up adobe reader on my computer to be able to sign using my a CAC. I can use the digital signature/certificates on the card to access websites in other programs on my computer, so I know it works... having trouble figuring out how to set adobe up to use it.

    Download and install AirPort Utility for Windows.

  • Small Business Digital Signature Set-up

    We have about 125 employees that have digital signatures created using Acrobat 9 and X. Is there a way to import all employee certificates (public keys) at one time into Acrobat so we can validate signatures when the signed PDF is opened?

    You can import all certificates on one Acrobat installation, set the trust, and then use Security Settings Export feature in Acrobat to export all these trusted identities. Then you send the acrobatsecuritysettings file to each employee and have them to Import Security Settings from this file.

  • Has there been an update or fix to the digital signature time zone off set being one hour off?

    Has there been an update or fix to the digital signature time zone off set being one hour off? I have seen that in the forum that this was identified as a bug back in June 2012. Any updates on this as it is still occurring in my version of Acrobat X with all updates applied. Thanks.

    Windows 7
    Sent from my BlackBerry 10 smartphone.

  • How do I reset my password for my digital signature I set up earlier today for a bank loan Signature Authorization?

    How do I reset my password for my digital signature I set up earlier today for a bank loan Signature Authorization?

    I am new at doing encrypted signatures and don't know how to bring it up in the loan document as it automatically brought up the start up page to get the digital signature.   Where do I go to set up a new one?

  • Can ILM_TOOLKIT  be  used standalone  for Digital Signatures on result sets

    Hello
    Looking for means to digitally sign rolled out PL/SQL software I found the Digital Signature functions of ILM Assistant.
    We probably won’t be using the basic functions of ILM as there’s already an application data lifecycle process in place, but the “Immutability” functions look very interesting.
    A digital signature, for our purpose, could perhaps be created with a query against DBA_SOURCE.
    So far I found the procedures
    ILM_TOOLKIT.create_sql_result_set
    ILM_TOOLKIT:delete_sql_result_set
    ILM_TOOLKIT.load_sql_result_set
    which might do what we want. But I haven’t found any published documentation yet
    Does anyone know if the ILM_TOOLKIT can be installed and used standalone (i.e. without apex and browser GUI) in order to be called directly and if there’s any documentation on it.
    Thank you very much
    Klaus

    Hi,
    You can certainly install the toolkit without the gui, but you would have to modify the installation scripts to keep it from installing the APEX application after the toolkit has been installed.
    There is no published documentation; however, I could give you some insight into what you would need to do. Let me know if this still interests you.
    Thanks,
    Greg

  • Digital Signatures getting lost when page presence set to hidden

    HI All,
    My project uses a multi page PDF which has signature fields in different pages. Because of performance issues i am showing only one page at a time and using navigation buttons to browse through pages. So when the PDF loads it displays Page1 and i sign the Digital Signature field and Click the next button which has event like
    Page2.presence="visible";
    Page1.presensce ="hidden";
    Now page2 is visible and if i move back to the Page1, the digital signatures are lost.
    But if i dont click the button , and save the PDF, the signature field is retained.
    I am not sure how can i retain the signature in this scenario
    Any help on this greatly appreciated.
    Thanks in advance.
    Ajesh Joseph

    What viewer are you using for showing the PDF?

Maybe you are looking for