Setting up CUVC-M and CUVC-D Behind Firewall

I recently setup
cuvc-m and cuvc-d(Scopia Desktop) behind a customer firewall. I opened ports 7070, 80 and 8080. When I browse to the website it starts to connect then says the connection is terminated. What other ports do I need to open to the server for this to work?
I did a wireshark trace and looks like I need to add 443, 10260 and 10262 but I want to confirm this is correct and there aren't others
Thanks
Greg

Dear Alex,
Thank you for reaching the Small Business Support Community.
I would first suggest you to uncheck the "Perfect Forward Secrecy" setting on the RVS4000 and if see if there is some similar setting enabled, then disable it, on the other side. If still the same thing happens, then go to RVS4000, VPN Advanced settings, and disable the "Aggressive Mode" so it becomes "Main mode" and use the same on the other end of the tunnel.
Just in case and as a VPN configuration guide, below is a document called "IPSec VPN setup" if it helps somehow;
http://sbkb.cisco.com/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=587
Besides my suggestions I would advise you to contact your ISP to make sure there is no IPSec traffic restrictions and/or if there is something in particular they require to make this happen and please do not hesitate to reach me back if there is any further assistance I may help you with.
Kind regards,
Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer
*Please rate the Post so other will know when an answer has been found.

Similar Messages

PAT with a single public IP and several servers behind firewall

Hi,
New to the ASA 5505 8.4 software version, but here is what I'm trying to do:
Single static public IP: 16.2.3.4
Need to PAT several ports to three separate servers behind firewall
One server houses email, pptp server, ftp server and web services: 10.1.20.91
One server houses drac management (port 445): 10.1.20.92
One server is the IP phone server using a range of ports: 10.1.20.156
Basically, need to PAT the ports associated with each server to the respective servers behind the ASA 5505.
Here is what I have. Is anything missing from this config? Do I need to include a global policy for PPTP and SMTP?
ASA Version 8.4(4)1
hostname kaa-pix
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.1.20.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 16.2.3.4 255.255.255.0
ftp mode passive
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network server_smtp
host 10.1.20.91
object service Port_25
service tcp source eq smtp
object service Port_3389
service tcp source eq 3389
object service Port_1723
service tcp source eq pptp
object service Port_21
service tcp source eq ftp
object service Port_443
service tcp source eq https
object service Port_444
service tcp source eq 444
object network drac
host 10.1.20.92
object service Port_445
service tcp source eq 445
access-list acl-out extended permit icmp any any echo-reply
access-list acl-out extended permit icmp any any
access-list acl-out extended permit tcp any interface outside eq pptp
access-list acl-out extended permit tcp any object server_smtp eq smtp
access-list acl-out extended permit tcp any object server_smtp eq pptp
access-list acl-out extended permit tcp any object server_smtp eq 3389
access-list acl-out extended permit tcp any object server_smtp eq ftp
access-list acl-out extended permit tcp any object server_smtp eq https
access-list acl-out extended permit tcp any object server_smtp eq 444
access-list acl-out extended permit tcp any object drac eq 445
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static server_smtp interface service Port_25 Port_25
nat (inside,outside) source static server_smtp interface service Port_3389 Port_
3389
nat (inside,outside) source static server_smtp interface service Port_1723 Port_
1723
nat (inside,outside) source static server_smtp interface service Port_21 Port_21
nat (inside,outside) source static server_smtp interface service Port_443 Port_4
43
nat (inside,outside) source static server_smtp interface service Port_444 Port_4
44
nat (inside,outside) source static drac interface service Port_445 Port_445
object network obj_any
nat (inside,outside) dynamic interface
route outside 0.0.0.0 0.0.0.0 16.2.3.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
prompt hostname context
no call-home reporting anonymous

Thanks Lcambron...I got PPTP to work. Everything else works fine. I can access email, access my web server, FTP server, and PPTP server. However, from the above configuration, I cannot access my DRAC over the internet..The DRAC runs on a different internal server, and over port 445. So I have th following lines:
object network drac
host 10.1.20.92
object service Port_445
service tcp source eq 445
access-list acl-out extended permit tcp any object drac eq 445
nat (inside,outside) source static drac interface service Port_445 Port_445
Am I missing something here? Internally, i can telnet to port 445 on 10.1.20.92, so I know it is listening. However, externally, i cannot telnet to my external ip address of the ASA through port 445.
Thanks

Set up a proper live and local DNS behind a router

Hello dear friends,
I'm new to Snow Leopard Server and also i'm quite inexperienced in setting up DNS. We bought a Mac Pro for out small company along with Snow Leopard Server to become independent from our ISP, for some specific services like web hosting, mail and to bring up new services like Address book server, iCal server, FTP, Mobile access etc...
So for me to do that i have to set up our own DNS first. We already bought our domain name (crisconsult.ro) and since then the site has been hosted on our ISP and then aliased to Apple. We also have our own (fix) public IP 80.86.123.116.
Having installed SL Server and set-up, behind an Airport extreme router, the server was unable to pick up our name server which is ns.crisconsult.ro. Since the router is the first in the network, the server became second with a local IP 10.0.1.2. This is the same IP that the server automatically set up for DNS, BUT if i keep this ip on our name server (ns) i feel it's not good since:
host ns.crisconsult.ro returns
ns.crisconsult.ro has address 10.0.1.2
and host 80.86.123.116 returns
116.123.86.80.in-addr.arpa domain name pointer ns.crisconsult.ro.
As i understand there should be our public IP (80.86.123.116), BUT all the tutorials on the net regarding setting up DNS in Leopard Server point that at DNS one should put the machine's own local IP and have the machine look at itself as DNS in network settings.
So? Is there a local DNS and a public DNS to set up? What gives?
I could really appreciate some help in configuring DNS, along to some good and real examples of DNS servers configured behind a router.
Thanks,
Andrei

Andrei,
I too, would love nothing more than to be able to use DNS on my 10.4, 10.5 & 10.6 servers. Unfortunately, the only way I have found to effectively wield a somewhat complete level of control over the bind DNS included with the server, is to abandon all usage of the Server Admin DNS control in favor of something like webmin. The good news is, webmin gives you a host of other features that I (sadly) don't expect to see within the Apple Server GUI any time soon.
Bad news, is that the 'best practice' way of setting up a stable, functional DNS on a Mac Server seems to be: clean install, webmin install, and never, ever use the apple DNS interface. Similar rule applies to web server.
I like to think the measure of a good admin is the ability to fix the problem(s) without having to reinstall completely. However, I can say from much experience and extensive googling, that what you are trying to do is a game of hopscotch in a minefield. You should be VERY familiar with the installation and setup process once you have your box configured the way you want it.
Hopefully one day Apple will decide to take the bull by the horns and address teh fact that DNS is an integral part of a sever set up these days and provide us users with some of that Apple think-outside-the-box-so-you-dont-have-to product that they have been so well known for. I can't say whether they're in too much of a hurry deploying video iPods or super-duper mice that the server product that you and I would love to see work efectively simply doesn't.
Sorry to get on a rant, I just want to save you some time that I lost figgerin' on this vexing enigma. I can use citations for my assertions if need be.
-Chance

Customization and business process behind NRAB (free goods) condition type.

Hi Experts,
I am currently working on SAP DSD development. and for pricing procedure we are using ZCPB10 (beverage kalkulation).
There is a condition type maintained NRAB for free goods .I had seen many threads explaining the concept behind it.
But i am clueless about the customization and business process behind it.
Can someone help me in customizing by giving an example ,so it would be very helpful for me to use .
Regards
Chinmaya

Hi Lakshmi.
The business process is pretty clear.We are selling 10 beer cans to the customer and charging for 8.So basically we need to get inclusive free goods.As per my understanding without going to free goods we can achieve this by NRAB condition type in our pricing procedure.
So the point is how can i set it up or what is the configuration behind NRAB condition type so that it can act in our pricing procedure.

Set location of components and reduce the size

I want to resize JavaFX component and shrink the components which are next to it. Here is the result which I get:
When I click on the angle of this component I can resize it down and right.
http://i.stack.imgur.com/jqoNW.png
The components which are next to it are pushed down and right. Part of them are behind the visible part of the screen.
http://i.stack.imgur.com/rsi0L.png
All components are placed in BorderPane,VBox,HBoxand againBorderPane. I don't want to allow components to move. I want to shrink them and use Scrollpane` when their size is reduced. Can you give me some hits how to solve these two problems?
Ref javafx 2 - Set location of components and reduce the size - Stack Overflow

I did something similar the other day. Based on the resizing of the scene I adjusted the position.
widthProperty().addListener(new ChangeListener<Number>() {
    @Override public void changed(ObservableValue<? extends Number> observableValue, Number oldSceneWidth, Number newSceneWidth) {
        widthChange((Double)oldSceneWidth, (Double)newSceneWidth);
heightProperty().addListener(new ChangeListener<Number>() {
    @Override public void changed(ObservableValue<? extends Number> observableValue, Number oldSceneHeight, Number newSceneHeight) {
        heightChange((Double)oldSceneHeight, (Double)newSceneHeight);
You should be able to do something similar, when you add a change listener to your component and handle the resizing of the other components.
What I don't understand is why you would need a scrollbar, when the components shrink down. I would think it would be the other way round.

I have receive my new ipad 2 last wek and found scratched behind.what should the steps to cliam at JB area

I have receive my new ipad 2 last wek and found scratched behind.what should the steps to cliam at JB area

The iPad was sealed in the box when I got it. It had the plastic screen protector wrapped all around it and when I powered it on for the first time it displayed the "connect to iTunes for setup" message displayed. The only other thing I can think of is if the person I bought it from had ordered it through Verizon on and the iPad was set up on a number on his pre-existing verizon account. My question is should I just keep using it and consider myself lucky? Since there is no way for Verizon to charge me for the usage because I never signed a contract. I realize that if it is on the account belonging to the person I bought it from, they will eventually figure this out and shut it off. But I might as well use it in the meantime right?

How do I set proxy settings for a Java app behind a corporate server?

I have the source code of a Download Manager program written in Java. It has to be run within my college network in which we use the "Corporate Client" server to access the internet. The HTTP proxy is 172.16.68.6 and Port number is 3128. How do I define these parameters in my java program so that it can download files from the internet?
The source code for the program is:
There are four classes:
1. DownloadManager.java
2. Download.java
3. DownloadTable.java
4. ProgressRenderer.java
/*__DownloadManager.java__*/
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.swing.*;
import javax.swing.event.*;
// The Download Manager.
public class DownloadManager extends JFrame
        implements Observer {
    // Add download text field.
    private JTextField addTextField;
    // Download table's data model.
    private DownloadsTableModel tableModel;
    // Table listing downloads.
    private JTable table;
    // These are the buttons for managing the selected download.
    private JButton pauseButton, resumeButton;
    private JButton cancelButton, clearButton;
    // Currently selected download.
    private Download selectedDownload;
    // Flag for whether or not table selection is being cleared.
    private boolean clearing;
    // Constructor for Download Manager.
    public DownloadManager() {
        // Set application title.
        setTitle("Download Manager");
        // Set window size.
        setSize(640, 480);
        // Handle window closing events.
        addWindowListener(new WindowAdapter() {
            public void windowClosing(WindowEvent e) {
                actionExit();
        // Set up file menu.
        JMenuBar menuBar = new JMenuBar();
        JMenu fileMenu = new JMenu("File");
        fileMenu.setMnemonic(KeyEvent.VK_F);
        JMenuItem fileExitMenuItem = new JMenuItem("Exit",
                KeyEvent.VK_X);
        fileExitMenuItem.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                actionExit();
        fileMenu.add(fileExitMenuItem);
        menuBar.add(fileMenu);
        setJMenuBar(menuBar);
        // Set up add panel.
        JPanel addPanel = new JPanel();
        addTextField = new JTextField(30);
        addPanel.add(addTextField);
        JButton addButton = new JButton("Add Download");
        addButton.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                actionAdd();
        addPanel.add(addButton);
        // Set up Downloads table.
        tableModel = new DownloadsTableModel();
        table = new JTable(tableModel);
        table.getSelectionModel().addListSelectionListener(new
                ListSelectionListener() {
            public void valueChanged(ListSelectionEvent e) {
                tableSelectionChanged();
        // Allow only one row at a time to be selected.
        table.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
        // Set up ProgressBar as renderer for progress column.
        ProgressRenderer renderer = new ProgressRenderer(0, 100);
        renderer.setStringPainted(true); // show progress text
        table.setDefaultRenderer(JProgressBar.class, renderer);
        // Set table's row height large enough to fit JProgressBar.
        table.setRowHeight(
                (int) renderer.getPreferredSize().getHeight());
        // Set up downloads panel.
        JPanel downloadsPanel = new JPanel();
        downloadsPanel.setBorder(
                BorderFactory.createTitledBorder("Downloads"));
        downloadsPanel.setLayout(new BorderLayout());
        downloadsPanel.add(new JScrollPane(table),
                BorderLayout.CENTER);
        // Set up buttons panel.
        JPanel buttonsPanel = new JPanel();
        pauseButton = new JButton("Pause");
        pauseButton.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                actionPause();
        pauseButton.setEnabled(false);
        buttonsPanel.add(pauseButton);
        resumeButton = new JButton("Resume");
        resumeButton.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                actionResume();
        resumeButton.setEnabled(false);
        buttonsPanel.add(resumeButton);
        cancelButton = new JButton("Cancel");
        cancelButton.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                actionCancel();
        cancelButton.setEnabled(false);
        buttonsPanel.add(cancelButton);
        clearButton = new JButton("Clear");
        clearButton.addActionListener(new ActionListener() {
            public void actionPerformed(ActionEvent e) {
                actionClear();
        clearButton.setEnabled(false);
        buttonsPanel.add(clearButton);
        // Add panels to display.
        getContentPane().setLayout(new BorderLayout());
        getContentPane().add(addPanel, BorderLayout.NORTH);
        getContentPane().add(downloadsPanel, BorderLayout.CENTER);
        getContentPane().add(buttonsPanel, BorderLayout.SOUTH);
    // Exit this program.
    private void actionExit() {
        System.exit(0);
    // Add a new download.
    private void actionAdd() {
        URL verifiedUrl = verifyUrl(addTextField.getText());
        if (verifiedUrl != null) {
            tableModel.addDownload(new Download(verifiedUrl));
            addTextField.setText(""); // reset add text field
        } else {
            JOptionPane.showMessageDialog(this,
                    "Invalid Download URL", "Error",
                    JOptionPane.ERROR_MESSAGE);
    // Verify download URL.
    private URL verifyUrl(String url) {
        // Only allow HTTP URLs.
        if (!url.toLowerCase().startsWith("http://"))
            return null;
        // Verify format of URL.
        URL verifiedUrl = null;
        try {
            verifiedUrl = new URL(url);
        } catch (Exception e) {
            return null;
        // Make sure URL specifies a file.
        if (verifiedUrl.getFile().length() < 2)
            return null;
        return verifiedUrl;
    // Called when table row selection changes.
    private void tableSelectionChanged() {
    /* Unregister from receiving notifications
       from the last selected download. */
        if (selectedDownload != null)
            selectedDownload.deleteObserver(DownloadManager.this);
    /* If not in the middle of clearing a download,
       set the selected download and register to
       receive notifications from it. */
        if (!clearing) {
            selectedDownload =
                    tableModel.getDownload(table.getSelectedRow());
            selectedDownload.addObserver(DownloadManager.this);
            updateButtons();
    // Pause the selected download.
    private void actionPause() {
        selectedDownload.pause();
        updateButtons();
    // Resume the selected download.
    private void actionResume() {
        selectedDownload.resume();
        updateButtons();
    // Cancel the selected download.
    private void actionCancel() {
        selectedDownload.cancel();
        updateButtons();
    // Clear the selected download.
    private void actionClear() {
        clearing = true;
        tableModel.clearDownload(table.getSelectedRow());
        clearing = false;
        selectedDownload = null;
        updateButtons();
/* Update each button's state based off of the
     currently selected download's status. */
    private void updateButtons() {
        if (selectedDownload != null) {
            int status = selectedDownload.getStatus();
            switch (status) {
                case Download.DOWNLOADING:
                    pauseButton.setEnabled(true);
                    resumeButton.setEnabled(false);
                    cancelButton.setEnabled(true);
                    clearButton.setEnabled(false);
                    break;
                case Download.PAUSED:
                    pauseButton.setEnabled(false);
                    resumeButton.setEnabled(true);
                    cancelButton.setEnabled(true);
                    clearButton.setEnabled(false);
                    break;
                case Download.ERROR:
                    pauseButton.setEnabled(false);
                    resumeButton.setEnabled(true);
                    cancelButton.setEnabled(false);
                    clearButton.setEnabled(true);
                    break;
                default: // COMPLETE or CANCELLED
                    pauseButton.setEnabled(false);
                    resumeButton.setEnabled(false);
                    cancelButton.setEnabled(false);
                    clearButton.setEnabled(true);
        } else {
            // No download is selected in table.
            pauseButton.setEnabled(false);
            resumeButton.setEnabled(false);
            cancelButton.setEnabled(false);
            clearButton.setEnabled(false);
/* Update is called when a Download notifies its
     observers of any changes. */
    public void update(Observable o, Object arg) {
        // Update buttons if the selected download has changed.
        if (selectedDownload != null && selectedDownload.equals(o))
            updateButtons();
    // Run the Download Manager.
    public static void main(String[] args) {
        DownloadManager manager = new DownloadManager();
        manager.show();
This example shows how to create a simple download manager in Java. It contains four classes in foru Java source files:
Download.java: Contains Download class which downloads a file from a URL.
DownloadManager.java: Contains the main class for download manager application.
DownloadsTableModel.java: Contains the class which manages the download table's data.
ProgressRenderer.java: Contains the class which is responsible to render a JProgressBar in a table cell.
The contents of the listed files are written below.
/*__Download.java__*/
import java.io.*;
import java.net.*;
import java.util.*;
// This class downloads a file from a URL.
class Download extends Observable implements Runnable {
    // Max size of download buffer.
    private static final int MAX_BUFFER_SIZE = 1024;
    // These are the status names.
    public static final String STATUSES[] = {"Downloading",
    "Paused", "Complete", "Cancelled", "Error"};
    // These are the status codes.
    public static final int DOWNLOADING = 0;
    public static final int PAUSED = 1;
    public static final int COMPLETE = 2;
    public static final int CANCELLED = 3;
    public static final int ERROR = 4;
    private URL url; // download URL
    private int size; // size of download in bytes
    private int downloaded; // number of bytes downloaded
    private int status; // current status of download
    // Constructor for Download.
    public Download(URL url) {
        this.url = url;
        size = -1;
        downloaded = 0;
        status = DOWNLOADING;
        // Begin the download.
        download();
    // Get this download's URL.
    public String getUrl() {
        return url.toString();
    // Get this download's size.
    public int getSize() {
        return size;
    // Get this download's progress.
    public float getProgress() {
        return ((float) downloaded / size) * 100;
    // Get this download's status.
    public int getStatus() {
        return status;
    // Pause this download.
    public void pause() {
        status = PAUSED;
        stateChanged();
    // Resume this download.
    public void resume() {
        status = DOWNLOADING;
        stateChanged();
        download();
    // Cancel this download.
    public void cancel() {
        status = CANCELLED;
        stateChanged();
    // Mark this download as having an error.
    private void error() {
        status = ERROR;
        stateChanged();
    // Start or resume downloading.
    private void download() {
        Thread thread = new Thread(this);
        thread.start();
    // Get file name portion of URL.
    private String getFileName(URL url) {
        String fileName = url.getFile();
        return fileName.substring(fileName.lastIndexOf('/') + 1);
    // Download file.
    public void run() {
        RandomAccessFile file = null;
        InputStream stream = null;
        try {
            // Open connection to URL.
            HttpURLConnection connection =
                    (HttpURLConnection) url.openConnection();
            // Specify what portion of file to download.
            connection.setRequestProperty("Range",
                    "bytes=" + downloaded + "-");
            // Connect to server.
            connection.connect();
            // Make sure response code is in the 200 range.
            if (connection.getResponseCode() / 100 != 2) {
                error();
            // Check for valid content length.
            int contentLength = connection.getContentLength();
            if (contentLength < 1) {
                error();
      /* Set the size for this download if it
         hasn't been already set. */
            if (size == -1) {
                size = contentLength;
                stateChanged();
            // Open file and seek to the end of it.
            file = new RandomAccessFile(getFileName(url), "rw");
            file.seek(downloaded);
            stream = connection.getInputStream();
            while (status == DOWNLOADING) {
        /* Size buffer according to how much of the
           file is left to download. */
                byte buffer[];
                if (size - downloaded > MAX_BUFFER_SIZE) {
                    buffer = new byte[MAX_BUFFER_SIZE];
                } else {
                    buffer = new byte[size - downloaded];
                // Read from server into buffer.
                int read = stream.read(buffer);
                if (read == -1)
                    break;
                // Write buffer to file.
                file.write(buffer, 0, read);
                downloaded += read;
                stateChanged();
      /* Change status to complete if this point was
         reached because downloading has finished. */
            if (status == DOWNLOADING) {
                status = COMPLETE;
                stateChanged();
        } catch (Exception e) {
            error();
        } finally {
            // Close file.
            if (file != null) {
                try {
                    file.close();
                } catch (Exception e) {}
            // Close connection to server.
            if (stream != null) {
                try {
                    stream.close();
                } catch (Exception e) {}
    // Notify observers that this download's status has changed.
    private void stateChanged() {
        setChanged();
        notifyObservers();
/*__DownloadTableModel.java__*/
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
// This class manages the download table's data.
class DownloadsTableModel extends AbstractTableModel
        implements Observer {
    // These are the names for the table's columns.
    private static final String[] columnNames = {"URL", "Size",
    "Progress", "Status"};
    // These are the classes for each column's values.
    private static final Class[] columnClasses = {String.class,
    String.class, JProgressBar.class, String.class};
    // The table's list of downloads.
    private ArrayList downloadList = new ArrayList();
    // Add a new download to the table.
    public void addDownload(Download download) {
        // Register to be notified when the download changes.
        download.addObserver(this);
        downloadList.add(download);
        // Fire table row insertion notification to table.
        fireTableRowsInserted(getRowCount() - 1, getRowCount() - 1);
    // Get a download for the specified row.
    public Download getDownload(int row) {
        return (Download) downloadList.get(row);
    // Remove a download from the list.
    public void clearDownload(int row) {
        downloadList.remove(row);
        // Fire table row deletion notification to table.
        fireTableRowsDeleted(row, row);
    // Get table's column count.
    public int getColumnCount() {
        return columnNames.length;
    // Get a column's name.
    public String getColumnName(int col) {
        return columnNames[col];
    // Get a column's class.
    public Class getColumnClass(int col) {
        return columnClasses[col];
    // Get table's row count.
    public int getRowCount() {
        return downloadList.size();
    // Get value for a specific row and column combination.
    public Object getValueAt(int row, int col) {
        Download download = (Download) downloadList.get(row);
        switch (col) {
            case 0: // URL
                return download.getUrl();
            case 1: // Size
                int size = download.getSize();
                return (size == -1) ? "" : Integer.toString(size);
            case 2: // Progress
                return new Float(download.getProgress());
            case 3: // Status
                return Download.STATUSES[download.getStatus()];
        return "";
/* Update is called when a Download notifies its
     observers of any changes */
    public void update(Observable o, Object arg) {
        int index = downloadList.indexOf(o);
        // Fire table row update notification to table.
        fireTableRowsUpdated(index, index);
/*__ProgressRenderer.java__*/
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
// This class renders a JProgressBar in a table cell.
class ProgressRenderer extends JProgressBar
        implements TableCellRenderer {
    // Constructor for ProgressRenderer.
    public ProgressRenderer(int min, int max) {
        super(min, max);
/* Returns this JProgressBar as the renderer
     for the given table cell. */
    public Component getTableCellRendererComponent(
            JTable table, Object value, boolean isSelected,
            boolean hasFocus, int row, int column) {
        // Set JProgressBar's percent complete value.
        setValue((int) ((Float) value).floatValue());
        return this;
}

Thank you for the quick reply! But the solution provided by you, it seems, has still not been able to address my issue. I ran the program at command prompt with your said parameters, but the download still gave an error in the App window.
Also, is there some way of defining these parameters in the source code? I am keen in using NetBeans to run the program.
Cheers!

I just got my new i phone 5 s and did all the syncing and backing up for my old iphone 4s and set my 5 up and synced it on itunes it synced evrything but the contacts and othe minior things were the only things that really transfered my apps and all my

I just got my new i phone 5 s and did all the syncing and backing up for my old iphone 4s and set my 5 up and synced it on itunes. It synced evrything but the contacts and other minor things. those were the only things that really transfered. My apps and all my music did not. Tthe thing is when i just went to go manually start dowmloading a few of the songs that i knew i already bought , itunes is making me pay forthem again. Its not saying instal like it usuall does when you go download something aleady purchased on your itunes account. I think or thought it might have something to do with the fact that i just changed my apple id name right before i got my new phine but my apps all re-downloaded (manually-no syncing) without making me pay for them again. i dont want to have to purchase allllll my songs again. Can someone please help me!! Itried going back to my old id or signing out of this id and signing in as my old apple id but now it wot even get on that oneits likjeit doesnt exist anymore.. And when i plug my old phone it shows in the itunes everything thats supposed to be there but all that doesnt stay in the itunes when i actually un plug it so when i plug my 5 in to my computer none of the stuff is in the store for me to actually transfer it I am so good with technology and this has me stumped please help

No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

HT1386 When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software.

When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.

bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

I am having a problem with my iphone 4s "To finish setting up iCloud, iMessage, and FaceTime enter the apple ID password..."

I was using my iphone just like any normal day and out of blue it went off because I let the battery die
it was 1% and I didn't put on charger, I forgot
so I put it on charger just like any normal day and it charged for sometime then it started to turn on
suddenly I got a weird screen on it a pic "iOS 6" and slide button saying "slide to set up" with all languages
I pulled that slide button
I found a screen of
Apple ID Sign In:
To finish setting up iCloud, iMessage, and FaceTime enter Apple ID password for ********@icloud.com
password:
so I wrote my password then clicked next
it got me to another screen saying "Updating iCloud settings...."
then it kept loading and loading so I restarted my mobile then I did all the above steps again
the next time it loaded fast and got me a new screen saying :
Your iPhone is now set up.
You're ready to start using the most advanced iOS ever
Start using iphone
and when I click on start using iphone, the iphone restarts itself and repeats the steps again !!!!!
I've tried everything, restarting my iphone, doing the steps, respring, clicking on home and off button, EVERYTHING !!!!
but it keeps redoing that stupid steps without any end
please HELP ME!! I need my iphone back!!!

weird, i would try to restore through iTunes and set up as new as a test.

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different p

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!

Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.

Where is the hyphen (-) on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

Where is the hyphen on the apple TV? I am trying to set up my network and there is a hyphen in the password for the network

A few options to try:
They hyphen should be next to the + on the character map.
If you are still having issues, provided your ATV software is up to date, you can now connect an Apple Wireless Keyboard through bluetooth connections.
Change your network password so it does not use a hyphen
Good luck!

How to set up DEV, TEST and PROD environment?

We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

We have used BI publisher Enterprise (standalone), Oracle BI Publisher 10.1.3.4.1. Our admin set up DEV, TEST and PROD environment based on the folder. For example, there is DEV folder, TEST folder and PROD folder. Developer is developing reports under DEV folder. Under TEST and PROD folder, there are many sub-folder based on the login user role. Sometimes a report has to be assigned to a multiple sub-folder under PROD. So our admin create symbolic links in the Linux box which BI server is located. That way, if a report is updated, there is no need to update the report in all sub-folder.
The issue I have is we are not allowed to touch any files under TEST/PROD folder. Only admin will move the report from DEV folder to TEST/PROD folder because those links admin created might be broken. However, as a developer, we still have permission to delete/rename/copy report under those restricted folders. Yesterday one report under PROD has been renamed by a developer. And admin complains because the links he has created not working anymore. Just wonder if admin doesn't allow developers to touch the reports under those folders, is there a way to remove the write permission on those folders? Also do you think this is a good practice to set up DEV, TESDT and PROD environment? Any input will be greatly appreciated.

How do I set up the "Objects and Attachments"

Hi .... I'm new at WorkFlow (and SAP for that matter) and have inherited a WF that is already built. In several of the steps I can see "Objects and Attachments" on the work item screen where a User can click to be directed to a transaction. For example, on one screen the User can click on "Incoming Invoice: 5105601690" to be directed to the Invoice Display Screen that is populated with information for that particular invoice (5105601690).
I am looking at the WF using TCode SWDD and cannot figure our how the original developer set this up. So my question is ..... for a particular WF step, how do you set up the "Objects and Attachments: area so that the User will be directed to a particular transaction when he/she clicks on it.
Thanks in advance, and sorry for such a "juvenile" question.
Dan A

Thanks for your reply Rajkumar,
I am looking at the screen you have directed me to. Business object is BUS2081 (actually it is ZMMWBS2081 which is a customized version BUS2081) Method is "Display" and Attribute is "InvoiceDocNumber". How do I know by looking at this that "Display" means Display Invoice? What if I wanted to display the PO instead?
Thanks for the "spoon feeding".
Dan A

How can I set BPEL server enviorment and create BPEL domain?

Without use the http console, how can I set BPEL server enviorment and create BPEL domain?
When I try to use API like below
import com.oracle.bpel.client.Server;
Server s = new Server(ServerAuthFactory.authenticate("oracle","localhost"));
But I always got four exceptions and one warning like below:
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\ejb.properties (The system cannot find the path specified)
Warning: unable to read transaction.interoperability config property
java.io.FileNotFoundException: C:\Workspace\WOSEDISystem\BPEL_Domain_Creation\config\security.properties (The system cannot find the path specified)
java.lang.Exception: Failed to create "ejb/collaxa/system/ServerBean" bean; exception reported is: "javax.naming.CommunicationException: Can't find SerialContextProvider
Is it right to use com.oracle.bpel.client.Server like this, please help me.
Best regards,
Vita

Anyone can help me? Because I need deploy BPEL process on production server, so I need the Java funtion to create domain. Thank you very much if you can tell me the correct method of using com.oracle.bpel.client.Server API.

Setting up CUVC-M and CUVC-D Behind Firewall

Similar Messages

Maybe you are looking for