Setting up headless Netra server for remote access

Hello,
I am looking for some step by step info on how to setup a default installation of Solaris 10 (headless) on a Netra T1 Server so that I can access it from a Windows box via VNC or what have you. I do not know anything, I am Solaris illiterate so the more you can tell me the better. Maybe someone knows where a guide is already? I have tried hunting up and down the internet already but only find bits and pieces of info here and there and then only relating to solaris 8/9. Trying to put all this info together is causing a big headache and makes it difficult to understand.
Will somone take pity upon me and help?
Thank you so much!
PW

Hi
its really easy
You need to have Apple remote desktop
there are bunch of software s like chichen vnc and etc.
01. open your router from your web browser
02. go to nat settings
03. screch the option calld port forwading
04. enter the server ip address to that
05. save and restart the router
** What you did so far
if some one want to connect from your static ip address now it will forwerd to your server. *******
Go to system preferences (on server)
go to sharing
enable remote management
select opetions which you want
your done
2nd part Adding Computer to ARD
Select All Computer ----> click plus button and select add by address
put the Address : ip address
user name : server User name
password : server password
eureka
now you done

Similar Messages

Help setting up Lion Server for remote access

I have been going in cricles for weeks trying to set this up correctly. Can anyone tell me what I'm doing wrong?
I got Lion Server and Server Admin Tools all updated and have been trying to follow Terry Walsh from We Got Served's guide but I missing something.
I purchased a domain from GoDaddy. Let's call it bradnet.com
My domain and dyn domain are not really what I have typed here but close enought that they should work for my example and trouble shooting.
Because my ISP (Comcast) doesn't provide a static IP I registerd for an account with dyn.com. This is where I get really confused. With dyn.com i created a host name: bradnet.dyndns-rocks.com and downloaded there updater software. It found my public IP address and said everything is ok.
I went back to GoDaddy and in my DNS manger page added the host: bradnet.dyndns-rocks.com and entered my public IP.
I then went to the server pane to edit the host name. I followed your instructions to edit the name and selected Host Name for Internet. I left the computer name as mini (what I had previously named it for file sharing before the server upgrade) and entered mini.bradnet.dyndns-rocks.com as the host name. When it takes me back to the server pane, in the bottom window it states:
Your Server's host name is mini.bradnet.dyndns-rocks.com, and its IP address is 192.168.1.10. You can change network settings in the Server pane.
I never get the your network is configured properly message.
I went and set my computer's IP to DHCP with manual address (although all of my machines are set up with DHCP reservations so I guess that is a little redundant) to 192.168.1.10.
I skipped the port forwarding step because I am using the latest AirPort Extreme as my router.
I then opened a browser and tried:
http://bradnet.com
http://mini.bradnet.dyndns-rocks.com
http://mini.bradnet.com
http://bradnet.dyndns-rocks.com
All of these got me the can't find the server response from Safari.
Also, I have not yet set up Directory Services. Terry's guide seems to suggest to do this step first.
I'm sure I have messed up some step somewhere can you see what I have done wrong?
Also, is it a problem to set up open directory services using a .local host and then go back and change it for internet access later or do you need to set that up from the start? My family is getting impatient with me trying to get this to work.
Thanks for any help anyone can offer!
Brad

That manual page is not fully correct. There is written:
Public UDP Port(s): <enter the appropriate UDP port value(s)>
Public TCP Port(s): <enter the appropriate TCP port value(s)>
Private IP Address: <enter the reserved IP address of the host device (from step 1)>
Private UDP Port(s): <enter the same Public UDP Ports or your choice>
Private TCP Port(s): <enter the same Public TCP Ports or your choice>
But it should be:
Public UDP Port(s): <enter unique UDP Ports of your choice>
Public TCP Port(s): <enter unique TCP Ports of your choice>
Private IP Address: <enter the reserved IP address of the host device (from step 1)>
Private UDP Port(s): <enter the UDP Ports used by your device>
Private TCP Port(s): <enter the TCP Ports used by your device>
Make sure you use the same ports in the private settings as you have defined in your IP camera. Normally a camera will use port 80 by default, so use 80 here.
The Public ports must all be unique. If you have not defined a port 80 here, you can also use 80. This will fail however when using multiple cameras. I for instance have 5 IP cameras and use the public ports 8451, 8452, 8453 etc.

Need help setting up Mac OSX Server for remote/off-site access

Hello, I want to be able to access our g5 tower running Mac OSX Server 10.5.8 remotely when not in the office. We have a static IP.
Are there easy step-by-step directions someone could provide or point me to? Thanks a bunch.

Hi
its really easy
You need to have Apple remote desktop
there are bunch of software s like chichen vnc and etc.
01. open your router from your web browser
02. go to nat settings
03. screch the option calld port forwading
04. enter the server ip address to that
05. save and restart the router
** What you did so far
if some one want to connect from your static ip address now it will forwerd to your server. *******
Go to system preferences (on server)
go to sharing
enable remote management
select opetions which you want
your done
2nd part Adding Computer to ARD
Select All Computer ----> click plus button and select add by address
put the Address : ip address
user name : server User name
password : server password
eureka
now you done

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

I have a mac mini server which I want to set up for remote access from windows and mac pcs. How do I do this. I can access it form my home network OK

Posted in error.

How to configure Time Capsule etc as a local network server with remote access server and for backups

I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
We've managed to set up a wireless network and both have wireless internet access through the TC
But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
How is the security setup on the TC?
The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate but it allows me full access to all the files.
If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

Setting up my Mac for remote access

Hey! I'm trying to set up, what i guess is a VPN? I'm running a g4 with Mac OSX 10.3.9.
Is there a way i can set it up to give someone remote access to that computers files?

I have the same problem. It must be somewhere in the computer, but I can't find it. I look forward to seeing responses to this problem.
Kelly

Configure Time Capsule for remote access

I have a second generation 2TB Time Capsule, operating on Bridge Mode, connected to an Arris Touchstone Telephony Gateway TG862. I want to configure Back to My Mac to be able to access the Time Capsule remotely.
I've followed the basic steps and get this message from the settings in the iCloud Pane in System Preferences: Setup router for better performance. And this details: Contact your ISP for a different server address.
I've tried Google and OpenDNS, and also disabling the Firewall in the Arris router, and still can't access the Time Capsule remotely.
I also tried disabling NAT and seeing it up as Bridged in the router, and disabling Wireless as well, trying to configure the Time Capsule to serve NAT and DHCP to no avail.
Any steps I'm missing or a whole different approach I should take to be able to access my Time Capsule remotely?
Thank you in advance for any help.

You will have to learn how to port forward in your Arris Gateway..
Arris Touchstone Telephony Gateway TG862
The easiest way is to simply google it.
http://forums.comcast.com/t5/Home-Networking-Router-WiFi/Port-forwarding-in-Arri s-TG852G-CT/td-p/954929
It certainly appears to be problematic.. which is not surprising... If you really need remote access I would request a pure modem from your ISP (Comcast??) or simply replace it with one in the list. You will need to turn off any inbuilt firewall in the router and use DMZ perhaps to the TC.
There is a few posts on youtube which also might help you. eg
https://www.youtube.com/watch?v=_8tKBHvCz_0
But I am on ADSL so my setup is too unlike yours to really tell you much.
If you want to test something.. let me recommend you load Teamviewer onto a computer in your LAN.. set the computer up to never sleep and then try and reach it using Teamviewer from WAN connection.. if that works.. let me recommend you stick to something of this type. Unless you are prepared to change modems with your ISP I doubt you will solve it.
If teamviewer fails nothing is going to work.. you need to at least turn off the firewalls in both the computer and the router..
If you don't want to leave a computer running 24/7 to accept incoming requests.. then use WD MyCloud or similar type NAS.. which are far better designed for remote access than Apple routers.. or use a cloud storage and keep files you might want there.

Desperate help needed to configure WVC210 for remote access?

Hi, I'm new and desperately need some help on setting up my WVC210 for remote access.
I manage to setup and see images from my WVC210 using my home LAN via both wired and also wireless.
I have 2 questions:
(a) for wireless connection, i only manage to get connection to my WVC210 if i disable the wireless security from my router. But that means i'm opening my wireless LAN to everyone. How can i still get connection to the camera if i enable the wireless security from my router. (FYI: my router is 2Wire ADSL from Singnet Mio)
(b) how can i get connection to my WVC210 from outside or in my office? I type in the camera Fixed IP address (displayed on the front screen) on the web browser, by it shows a error page. Is there some setting that i might need to adjust ?
Pls kindly help me
Thank you.

Bernard,
For Item (2) is there any difference between the camera built-in dyndns updater versus the software updater? I am under the impression that the software updater is easier to manage.
The biggest difference for you is that the camera always stays at the same location, and the laptop goes with you. Every time you access the internet from a different location with the laptop the software updater is sending the new IP address to dyndns.com. This causes you to lose access to your camera because the FQDN doesn't point to your home IP address anymore. Once the dyndns credentials are in the camera (or router) there is no management needed. The device will automatically update dyndns.com with your new IP address as it changes, and you do not need to do anything.
For Item (3), are you saying port forward 1025 is it for the 2nd camera only or for both? Or is it 2nd camera use 1025 and first camera use 8080?
Here's an example of what I mean:
Camera 1: 192.168.1.210 port 1024. In router, forward port 1024 to 192.168.1.210
Local Access: http://192.168.1.210:1024
Remote Access: http://bernards210.dyndns.org:1024 (Example)
Camera 2: 192.168.1.211 port 1025. In router, forward port 1025 to 192.168.1.211
Local Access: http://192.168.1.211:1025
Remote Access: http://bernards210.dyndns.org:1025 (Example)
Camera 3: 192.168.1.212 port 1026. In router, forward port 1026 to 192.168.1.212
Local Access: http://192.168.1.212:1026
Remote Access: http://bernards210.dyndns.org:1026 (Example)
to access the 2 camera outside, do i have to have another dyndns host name or can i use the current one for both camera?
As you can see in the above example, the dyndns name remains the same for remote access to all three cameras. The only change is the port number at the end. Your router will translate the port number to the IP address that the port is forwarded to, allowing you to select the camera that you wish to view by changing the port number in the address.
I was actually thinking that the camera web browser can show 2 camera at the same time. Is it possible?
No. Each browser window will display a single camera. You can however opens multiple instances of your browser to allow viewing of more than one camera simultaneously. A better solution is to install the Video Monitoring Software that is included with the camera which allows you to view multiple cameras in the same window.

How to Use synchronous RFC calls during test run for remote accesses

there is a Setting for the usage of RFC accesses from a tested system
using eCATT.
'X' - Use asynchronous RFC calls during test run for remote accesses
' ' - Use synchronous RFC calls during test run for remote accesses
I developed an eCATT as following :
SAPGUI ( SAPGUI_1 , Target_system_1 ).
SAPGUI ( SAPGUI_2 , Target_system_2 ).
My question is how to run the eCATT in a synchronous RFC calls
PS: I do not want to change the Target_system to the same one in the
above script of ecatt.Because I need to run it in 2 different Target
systems sometime.
for example, I give a Target_system_3 when run this eCATT
I want the SAPGUI_1 and SAPGUI_2 run the Target_system_3 but not the
Target_system_1 or Target_system_2 .
Could you please tell me how to make it without the changes in script?
Edited by: Weitong Liu on Mar 24, 2011 9:44 AM

Hi Liu,
Weitong Liu wrote:
> ' ' - Use synchronous RFC calls during test run for remote accesses
This is the standard option value. Asynchronous are not the standard way and used only for very special purposes.
Weitong Liu wrote:
> I developed an eCATT as following :
> SAPGUI ( SAPGUI_1 , Target_system_1 ).
> SAPGUI ( SAPGUI_2 , Target_system_2 ).
> My question is how to run the eCATT in a synchronous RFC calls
The commands will be executed in sequence. So each call will be synchronously replayed against TS1 and TS2.
What is you issue with this standard procedure?
Kind regards,
Christoph

VRF-Aware IPSec for Remote Access

Dear All,
Has anyone successfully implemented VRF-Aware IPSec for Remote Access ?
I am trying to implement this feature on a PE which has MPLS enabled
on the Internet facing interface.
With the config below, I am being able to establish an IPSEc tunnel but not being able to PING the VRF interface configured on the same PE.
I will be really grateful for any comment or any pointers for what could
be possibly wrong with the configuration below:
aaa new-model
aaa authentication login USER-AUTHENTICATION local
aaa authorization network GROUP-AUTHORISATION local
crypto keyring test-1
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group test-1
key test-1
domain test.com
pool cpe-1
acl 101
crypto isakmp profile test-1
vrf test-1
keyring test-1
match identity group test-1
client authentication list USER-AUTHENTICATION
isakmp authorization list GROUP-AUTHORISATION
client configuration address initiate
client configuration address respond
client configuration group test-1
crypto map IPSEC-AWARE-VRF 2 ipsec-isakmp dynamic test-1
ip local pool cpe-1 192.168.81.1 192.168.81.254 group test-1
crypto dynamic-map test-1 1
set transform-set test-1
set isakmp-profile test-1
reverse-route remote-peer
Internet facing interface
interface GigabitEthernet4/0/0
ip address x.x.x.x 255.255.255.240
ip router isis
mpls ip
crypto map IPSEC-AWARE-VRF
Customer facing interface
interface GigabitEthernet1/0/0.1
encapsulation dot1Q 100
ip vrf forwarding test-1
ip address 110.110.110.1 255.255.255.0
Kind regards,
ZH

Million thanks for this.
This now works after disabling CEF on the public facing interface.
Regards,
Zahid

Setting up an Internal Server for Captivate 5 using ASP

We recently purchased Captivate for one of the features of being able to setup an internal server. I viewed the blog entry about setting up an internal server and it seemed pretty straight forward except that our server is setup for ASP not PHP. Does anyone have a template for ASP coding and have you set up an Internal Server for collecting Quiz Results in the Quiz Results Analyzer instead of using Acrobat.com.

Server address = FTP host
Host directory is optional but you need to ensure that Dreamweaver is looking at the root directory of your website in Remote View.
If you see a folder such as public_html or html or httpdocs or similar then you're one level too far up in the folder hierarchy on the server.
Simply put the root directory folder name (public_html or html or httpdocs or whatever it's called on your server) into the Host Directory field in Dreamweaver.

Set up Oracle HTTP Server for a particular IP address

How do I set up Oracle HTTP Server to allow access control based on a particular IP address to certain CGI Scripts if a site is a local site?
I have tried this in httpd.conf file but it does not restrict a particular IP address (say 10.1.2.4) in my home network (consists of 3 PCs). 10.1.2.3 is the IP address of node where OHS is installed. I access my OHS from client like this http://10.1.2.3:7777/cgi-bin/printenv
ScriptAlias /cgi-bin/ "C:\oracle_home\Apache\Apache\cgi-bin/"
<Directory C:\oracle_home\Apache\Apache\cgi-bin>
AllowOverride None
Options None
Order Deny,Allow
Deny from all
Allow from 10.1.2.3
</Directory>
Note: - I have not made any changes in the default configuration of OHS.
Any help for a student like me will be highly appreciated.
Regards
Rajesh Kumar

No the idea is not to disable the signature. The reason why I wanted you to locate the specific block/deny was to make it easier to fix it. I would still recommend to use the Event Action Filters only to exclude the host and not disable the signature altogether.
That said, there are some signatures that "according to the documentation" cannot be excluded using event actions like Sweep signatures. These signatures have a field for Source/Dest IP built-in to exclude specific hosts. HOwever to be honest I could get event actions to work perfectly with event actions on our customers ;), so it could be an old restriction still mentioned in the docs.
Lastly, you only disable a signature when you are absolutely sure that you are not running the Software/Application/Service on your network. For example on one customer we would frequently get VPN 3000 COnc. HTTP attack signatures fired for internet traffic, and since there is no chance to add any VPN3k on this network (its already End of Sale), I disabled this signature.
Regards
Farrrukh

Setting up local testing server for coldfusion 9

I could use some help with this thread in coldfusion forum...
setting up local testing server for coldfusion 9 w dreamweaver on mac
http://forums.adobe.com/thread/773350
thanks

I'm marking this as assumed answered, as you seem to have solved the problem in the other thread.

LDAP vs local login for remote access

Hi Team,
I am evaluating the best means for single factor authentication for remote access (client to site or SSL VPN). The options I see are creating local usernames and password or integration with Active Directory via LDAP. What are the pros and cons of these solutions.
I feel local logins are more secure comparitavely because the user first login using local login and password and then has to use the domain credentials for accessing corporate resources. Of course, this comes at an admistrator overload and local management of user names and passwords. Do you have any opinion on this? Any acknowledgement will be highly appreciated.

Hello Manoj,
IMO, I would never consider the LOCAL DB as an option for a corporate deployment. It does not scale and it is not easy to manage.
Local DB is used in case you need to manage a number of 15 users for instance, so in this case it is managable, but when it comes to a higher number it is not an option.
Active Directory is a better solution since it is meant to handle hundred of users and allows password-management for instance. Also you can have many ASA devices, performing DB bindings and queries to check the users credentials to the AD servers, so you don't need to deal with tons of user accounts on each ASA, for instance.
If you are looking for a more secure way to authenticate your users you can consider two-factor authentication using certificates for instance:
AnyConnect Certificate Based Authentication.
Why to use AD:
Pros
Scalable.
Easy to manage.
Allows password-management.
Cons:
Expensive (not open AD solution).
HTH.
Please rate helpful posts.

Can i set a node manager serve for 2 domain on one machin??

My question is simple.
I installed webcenter suite and soa suite in a machine using difference linux user and difference middleware home.
and I want to set a node manager server for two domains (soa_domain and webcenter_domain).
Is is possible?
When I tried to register domain list in node manager domain list using nmEnroll() of wlst, it failed.
please check following logs in 7101 is admin server port of soa domain and I ran node manager on webcenter domain.
Thanks in advance.
BmW.
~~~~~~~~~~~~~~~~~~
wls:/offline> connect()
Please enter your username :weblogic
Please enter your password :
Please enter your server URL [t3://localhost:7001] :t3://localhost:7101
Connecting to t3://localhost:7101 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'soa_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> wls:/soa_domain/serverConfig> nmEnroll('/u02/app/soa11g/middleware/user_projects/domains/soa_domain', '/u02/app/wc11g/middleware/wlserver_10.3/common/nodemanager');
Enrolling this machine with the domain directory at /u02/app/soa11g/middleware/user_projects/domains/soa_domain ...
Traceback (innermost last):
File "<console>", line 1, in ?
File "<iostream>", line 1447, in nmEnroll
File "<iostream>", line 1848, in raiseWLSTException
WLSTException: Error occured while performing nmEnroll : Problem enrolling the machine. : /u02/app/soa11g/middleware/user_projects/domains/soa_domain/config/nodemanager/nm_password.properties (Permission denied)
Use dumpStack() to view the full stacktrace
wls:/soa_domain/serverConfig> exit();

you might be victim of the "node manager starts WL Server with same Unix user id that was used to start Node Manager itself" problem
see here http://forums.oracle.com/forums/thread.jspa?threadID=2184607&tstart=89
I have been looking everywhere for a simple way to tell Node Manager to use a different Unix UID,
anybody any clue?
here http://download.oracle.com/docs/cd/E12840_01/wls/docs103/nodemgr/overview.html the Node Manager doc page

Setting up headless Netra server for remote access

Similar Messages

Maybe you are looking for