Setting up Jabber with Edge 95 and E40

I would like to set up Jabber on my PC to work with my company's E95 F8.0 NTSC and E40.  I'm told that I need a video license. 
Where do I get that license?
Is there an evaluation version available to make sure everything works before buying the license?
Are there any other considerations?
Any direction would be greatly appreciated!

Hi,
A temporary license is issued prior to shipment, or if the order has been placed already. Please check this URL:
https://tools.cisco.com/SWIFT/LicensingUI/demoPage
You can also send an email to the licensing team to see if they can provide one:
[email protected]
Regards, 
Tere. 
If you find this post helpful, please rate!

Similar Messages

  • Opportunistic TLS between our Exchange 2010 SP3 on Premise (WIth Edge) and Exchange Online Protection.

    Hi,
    We would like to configure Opportunistic TLS between our Exchange 2010 SP3 On Premise Systems (with Edge) and EOP.
    I can see that Opportunist TLS is enabled on both the send and receive connectors in EOP. SO I think no change required here.
    The On premise Send Connector (Configured by EdgeSync) does not have the option for Opportunistic TLS. Under "Configure Smart Host Authentication Settings" it is currently set to "None". I have the option for "Basic Authentication
    over TLS" but this requires a Username and Password. No option for Opportunistic TLS. When I look at the properties of the send connector (get-sendconnector "sendconnector_name" | fl) I
    can see that the IgnoreSTARTTLS parameter is set to FALSE - so I think that means it is enabled. So I think no changes required here- right?
    The receive connector on the Edge Server has the TLS option on the Authentication tab - so I guess I just check that option right?
    The Edge servers also run TMG and the two are integrated. I don't think this changes anything but thought I would include it in case it does.
    Anything I have missed?
    Thanks very much.
    Geoff
    ilmuro69

    Hi,
    We would like to configure Opportunistic TLS between our Exchange 2010 SP3 On Premise Systems (with Edge) and EOP.
    I can see that Opportunist TLS is enabled on both the send and receive connectors in EOP. SO I think no change required here.
    The On premise Send Connector (Configured by EdgeSync) does not have the option for Opportunistic TLS. Under "Configure Smart Host Authentication Settings" it is currently set to "None". I have the option for "Basic Authentication
    over TLS" but this requires a Username and Password. No option for Opportunistic TLS. When I look at the properties of the send connector (get-sendconnector "sendconnector_name" | fl) I
    can see that the IgnoreSTARTTLS parameter is set to FALSE - so I think that means it is enabled. So I think no changes required here- right?
    The receive connector on the Edge Server has the TLS option on the Authentication tab - so I guess I just check that option right?
    The Edge servers also run TMG and the two are integrated. I don't think this changes anything but thought I would include it in case it does.
    Anything I have missed?
    Thanks very much.
    Geoff
    ilmuro69

  • I've lost the contacts and calendar events from my 3GS after setting up iCloud with iPad3 and PC Outlook.  Any solutions?

    I've lost the contacts and calendar events (& email) from my 3GS after setting up iCloud with iPad3 and PC Outlook.  Any solutions?
    I tried to re-synch it with the PC iTunes, but no luck, even when re-checking the boxes for Outlook...

    I should mention that i have NOT upgraded to iOS 5 on the 3GS and don't want to.  Therefore, no iCloud on the phone.

  • Can I build a interactive log-in form with Edge and Export Raw code to edit?

    Hey Everyone,
    I love adobe edge, but I'm still getting used to it. It's very easy to use, but I ran into an issue. I am redesigning a webpage for a client and need to build a log-in page and re-design the site. The site is a Dashboard that will be on an ipad and computer. What I need to do is take my design and design a template for them to use. They require HTML4 and up with some coding (not a fan of coding, I am strictly a designer, and before you guys critize about why I took the job when I don't know coding, it's a side project they are having me do for them while the main design project is being evaluated and I'm on contract so I don't have a choice, still would like to learn how to achieve what I need) but I still want to maintain the animation I have planned for the log in, very simple nothing special. Basically what I want is when you log in and click in the "text" box the background image will go from the clear image to the blur image.
    What I've done so far,
    I built the log-in page as a test to see if it would work (didn't take long since I saved as a PSD and imporated the files). I've attached an imagw to show a visual of what I am trying to do. The animation works fgreat for what i need, but now I want the box I click in to be writtable inside and work with the animation. I can't seem to figure out how to make the box's I created typable to type in for a "Username" and "Password" in other word interative. I used the boxes provided in edge because they are HTML boxes, but I want them to become text boxes to enter the Username and Password (It doesn't have to be perfect just enough for me to type in to pass off to the programmers). I know you can make edge interative with muse and what not and I was hoping to achieve what I want for them so I can export it and pass it off to the programmers. Is there a way to add this in Edge? If not, I know you can export to Dreamweaver and  when I import the file to Dreamweaver I just see a grey box with the file I created (.oma I think) from Edge but not the content unless I "Preview it" in a browser.
    So is there a way to build what I want in edge without resorting to dreamweaver? If so and there is code to input can you guys provide step by step on how to put it in the program? And is there a way to export the project so I can pass the RAW code to the programmers to do there thing? Lastly, is there a way to incorporate Jquery mobile to Edge? For the Dashboard can I build the same thing in Edge? Example what will be in there are things like charts, Calendars, Dates, Etc, Etc.  If I need to resort to building it in dreamweaver I can provide the code for you guys to alter to change for what I need. Like I said I'm not a big fan of coding and a little stranger to it. I just know the basics and the fact I haven't touched dreamweaver since CS4 makes it even harder to use. Some tools I like are gone such as AP divs. However i like the new elements you can inject into the program such as the Jquery stuff, but for the simplist things I want to do such as moving them left or right or centering them is a different story.
    Please Help!
    Thanks!

    if you search on the forum you can find useful posts about creating a form in edge
    Zaxist

  • A friend set me up with icloud and in the process he lost some of the book i was listening to. I can't find it in my ipod or on my computer. It is part one and two of a book; interest part three showed up hough.

    A friend set me up with icloud on my ipod touch and in the process lost part one and two of the book I had purchased from itunes. I searched for it and it is not in my ipod any longer, although part 3 is there.  I tried to download it again from itunes store but they said I already purchased it and I didn't want to be charged again. What can I do? I am not happy at all because all I did with my Ipod was listen to my book and now I can't.

    Hi.
    If you've bought it from iTunes, you should be able to re-download it for free.
    Download directly from iPod by going to the iTunes Store-App and find the "Purchased"-menu. From here you should get a complete list of all your bought items and the ability to re-download.
    Download from iTunes on PC/Mac by opening iTunes > Go to iTunes Store > Go to the menubar on the left and choose "Purchased". Now, from the appearing window select the proper categori on top of the screen.
    I hope this was helpful.

  • How to set up Bluetooth with iPhone and computer

    Hi there.
    I am now the proud owner of a brand new iPhone 3GS 32GB and I'm in love...
    I'm trying to set it up with Bluetooth. I used to be able to "Bluetooth" files to and from my computer with other mobile devices but I have difficulties with the iPhone. It won't connect. Anybody knows what I need to do? Cheers.

    The iPhone _does not_ support Bluetooth file transfer. You must use the USB cable for syncing, or there are file transfer/storage apps in the App Store (Files, File Magnet, Air Sharing, there are lots) that use Wi-Fi.
    On the iPhone, Bluetooth is limited to voice calls, music streaming to stereo headphones, and tethering (using the phone as a cellular modem). Tethering requires carrier support - O2 and Orange support it, Tesco does not.

  • I have set up iphone4s with pc and ticked only required songs to transfer to Iphone and clicked apply all the iphone displays under each genre is loading. This has been going on for 12 hours. How long does it take. It only shows 6.3gb used out of 13.6eyi

    I have set up Iphone4s with my pc and ticked only required songs to sync. I clicked apply and it has been going for over 12 hours on my Iphone just displayimg loading. The capacity on my iphone shows a capacity of 6.3gb used out of 13.6 Am i doing something wrong ?

    Thanks for the replies. It took a while not hearing anything so thought I was alone. I have done many of the suggestions already. The key here is that it occurs on both phones with apps, and phones still packaged in a box.
    A Genius Bar supervisor also checked his Verizon data usage log and found the same 6 hour incremental use. Suprisingly, he did not express much intrigue over that. Maybe he did, but did not show it.
    I think the 6 hour incremental usage is the main issue here. I spoke with Verizon (again) and they confirmed that all they do is log exactly when the phone connected to the tower and used data. The time it records is when the usage started. I also found out that the time recorded is GMT.
    What is using data, unsolicited, every 6 hours?
    Why does it change?
    Why does it only happen on the iPhone 5 series and not the 4?
    Since no one from Apple seems to be chiming in on this, and I have not received the promised calls from Apple tech support that the Genius Bar staff said I was suppose to receive, it is starting to feel like something is being swept under the rug.
    I woke up the other day with another thought ... What application would use such large amounts of data? Well ... music, video, sound and pictures of course. Well ... what would someone set automatically that is of any use to them? hmmm ... video, pictures, sound. Is the iPhone 5 succeptible to snooping? Can an app be buried in the IOS that automatically turns on video and sound recording, and send it somewhere ... every 6 hours? Chilling. I noted that the smallest data usage is during the night when nothing is going on, then it peaks during the day. The Genius Bar tech and I looked at each other when I drew this sine wave graph on the log print outs during an appointment ...

  • Setting up network with newer and older AirPort Extremes

    Okay, I thought this was going to be so simple. I have a newer (like a year old - square) Airport Extreme that I have three computers wirelessly hooked up to in the house. Great... so now, I want to hook up the old iMac in my son's room that doesn't have a wireless card to the network. It is too far away to use the ethernet cable into the back of my newer Airport Extreme station so I figured I'd dust off the old saucer type base station, plug the ethernet cable into that in my son's room and then just easily get the old base station to network with the newer one wirelessly.
    Not so easy. The newer one has no reference how to make a network with other base stations whatsoever and the old book describes how to with the Airport Admin Utility which is not available to the newer version, just Airport Utility and it does not have the WDA options listed. I tried to extend the network and then Doh! The whole network disappeared.
    Is this a compatibility issue with the older and newer base stations? Would it just be easier to put in a wireless card to my very old iMac, if that's even possible? Has anyone successfully networked an old and new base station together? If so how?
    Thanks!

    Welcome to the discussions!
    When you have an older "g" device (the flying saucer) and a newer "n" device (the square one) in order for them to communicate using wireless only, you must configure both of them in what is known as WDS configuration.
    This is a quite tricky setup for most users. The best set of instructions that I've seen for this comes from expert user Tesserax in this thread:
    http://discussions.apple.com/thread.jspa?threadID=2355832&tstart=0
    If you elect to try this type of setup, you will probably need to hold down the option key on your Mac while you click on the Wireless Mode selection box to get the WDS option to appear. (My guess here is that Apple "hides" it because it slows down the network substantially). But, it's the only way to do what you want to accomplish with and old and new device.
    Other options would include the wireless card you mentioned for the iMac. Even better might be a pair of ethernet powerline adapters. One adapter goes near the AirPort Extreme and the other near the iMac. The AC wiring in your home transmits the ethernet signal of the powerline. Works great, almost no configuration required and better than wireless in many cases.

  • How can i set up emails with header and signature

    HI all
    I have an email account that is work only, all emails sent have a graphic header on the top, and finish with my name and company contact details.
    I would like this done automatically, Currently I drag the header in, which is a pain when I send a lot. I have set up the signature but when I reply to an email, it puts the signature at the bottom of the whole email and not just the reply. Is there a way of making my life easier.
    Russ

    For Apple Mail, you can set this up using what is called "stationery"; it's off to the top right of the message composition window when you're sending a message. Click that, and select the stationery you want to fill in. See the mail documentation and see the "Save As Stationery..." options in the menu.
    Mac OS X Server doesn't AFAIK have a mechanism for automatically inserting this sort of stationery stuff at the mail server; the message contents are largely determined locally at the Apple Mail or other mail client.
    Here's [Apple Mail Stationery Pro Tip|http://www.apple.com/pro/tips/mail_templates.html]. As for selecting this by default, I don't know that that's available without some local customizations. There are ways to cause a particular template to open by adding it into the dock or the Finder sidebar, but I don't know of an integrated way to automatically and always select a default stationery for your messages.
    See if the folks over in the [Apple Mail forums|http://discussions.apple.com/forum.jspa?forumID=1338] might know more about that.
    And here are [more details than you probably want|http://developer.apple.com/Mac/library/documentation/AppleApplications/Con ceptual/MailArticles/Articles/stationery.html] on how this stuff is constructed.

  • How to set up Windows with Reader and certificate for all users

    Good afternoon (GMT),
    we're dealing with a Win XP (SP3) system that is set up by an Administrator. One task is to set up the system in a way that all users (w/o admin rights) become able to read a certified-protected PDF. Currently we know a way to install the "public key" for this certificate only for one known user. But how to proceed when not all users are known? The users shall later on never be asked to confirm the certification installation/registration.
    If it helps, here is the software version:
    Acrobat 8.12 to encrypt the PDF via certification. In near future I will switch to Acrobat 9.x
    Reader 7.x and/or 8.x on customer PCs.
    Thank you for ideas and hints.
    BTW: Next time we want to provide a solution for Win7 systems, too.
    Carsten

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • Is there a known bug when animating images with edge and dps?

    Hi, I've seen some oddities when using edge to create html5 elements for Indesign. Essentially I have spent hours trying to get an image to scroll from left to right. Works fine in a browser and worked fine in dps and iPad yesterday. Using the same setup: the stage in edge is 768x1024 I then animate a large image in the x axis 0 to -500 over 6 secs, I then apply a ease in and out. I then save the HTML, and publish for dps. Within dps I goto file > place and select the published file that edge generates for dps. I then update and preview either in desktop or iPad - the file loads but the animation does not play.
    Weirdly if I follow the exact same steps but add some other bits of animation ie drawing a square and moving it, the animation plays. If I open an existing file I.e your inbuilt tutorial files, delete the content and redo the image animation it works, it's only in a new project that it doesn't  preview or play in iPad?
    Another issue I have is when it does load the animation doesn't load in that well and shows most of the bottom and then after a .5sec the rest of it loads. so it's a vbit scrappy - any suggestions?

    Thanks,
    To give you a bit more info, we used my bosses computer and he was able to recreate the same issue with the animation not loading. however if we change the process by using the rectangular frame tool and using the web content folio overlay it works, and inserting the HTMLResources.zip. However we noticed that the animation did not run smoothly, very jerky like the ipad was struggling. I've now corrected this, by changing the properties of the image within edge from div to img. This seem to have worked nicely.
    So there are some weird things going on, more so around the publishing function within edge.
    Many thanks

  • Line2/Mic2 setting not holding with Skype and MS

    I am currently running SB Audigy 2 ZS Platinum with Creative front panel on a XP SP2 machine. I am extremely happy with this sound card. I have the latest drivers and updates for both OS and sound card installed?Recently i ran into something that has boggled me. I can set the mic settings in the sound settings to default to the Line2/Mic2 port on the front panel?and it works fine. However when i try to use skype or MS IM with my headset plugged into the front panel, the setting changes to the rear panel mic setting as soon as i try to make a call. I set both skype and MS IM to use "windows default" for the mic input, but it changes (the same thing happens when i set them to use the SB Audigy selection), almost like those programs are forcing their own settings. No other program i am running does this and i can do video edits with voice overlays using the front panel without any problem.
    My headset is not USB, it is analog with seperate plugs for both earphones and mic and otherwise works perfectly. Frankly i am stumped, i would rather not have to use the rear panel Mic port if i can avoid it?Thanks in advance for any and all assistance. Jean Luc?

    Some programs do force their own default settings for the recording device, Messenger is one of those programs, it alters the mixer settings. You can try muvixer, it resets your recording settings when a program changes them. http://www.muvaudio.com/muvixer/

  • Unable to set wireless connection with imac and Canon MX860 printer ...

    I recently converted to a Mac and bought a Mac Book, iMac, Airport Extreme, and a Canon MX860 printer. i have installed the canon software numerous times on my iMac to set up the wireless connection. yes, the airport extreme recognizes the printer and i am able to connect to my private and guest networks. the signal strength is good. It's the next part that I'm always stuck at. The Printer settings does not display when i choose More Printers and select Canon IJ Network. I called Apple support and we tried changing my network settings to an unsecured network and it still has the same issue. It was recommended this may be Canon driver issue and advised me to contact Canon. I reset the Airport, changed my network name and password .. i think i tried everything and it still does not work. What was I thinking when i said i wanted to convert to Mac? I can't move forward and connect my macbook or pc yet until I successfully connect the imac. Yes, i installed the latest canon IJ Network tool. of course the USB connection is fine but that defeats the whole purpose if why i bought this printer. please advise how to fix. this is getting very frustrating.

    Some help at http://store.apple.com/us/product/TV352LL/A perhaps in the comments.
    And maybe at http://www.amazon.com/Canon-PIXMA-MX860-Wireless-Printer/product-reviews/B001R4C 5BK in the comments.
    "I ran into the same network installation issue that I've seen in other Canon printers. Canon's network setup forces you to connect by USB cable first. Only after you tell the program that you want to use the computer over the network can you remove the USB cable, move the printer if needed, and if you're using a wired connection, reconnect a network cable. The process isn't particularly difficult, but it's more cumbersome than what other printers let you do, which is simply put the printer where you want it, plug in an Ethernet cable, and install the software." source = http://shop.pcmag.com/shop/product/pcmag/84634068.aspx?SB=6&OB=1
    "MAC wireless network printer setup requires turning off firewall, and works fine if you leave firewall off (not recommended). If you set firewall at "essential connections only," wireless networked MX860 won't work. You must add MP navigator and solution apps to your firewall enabled list. Then it worked fine on the admin account, but still won't work on users account which required additional permission settings and selections. After 2 hours it worked fine, but I would've expected better instruction manual for MAC." source = http://cnet.nytimes.com/multifunction-devices/canon-pixma-mx860/4852-3181_7-3352 9769.html
    "The only trouble that I have had with this machine is setting up the wireless network. The manual instructions are impossible for me to understand and I ended up having to call for assistance. Which easily solved the problem. And again when I had to reconfigure my network settings it was impossible to follow the logarithm of instructions in the manual. Again I needed to call for assistance. If I need help after the year manufacture's warranty I will be charged for these calls." source = http://www.zimbio.com/InkjetPrinter+Reviews/articles/1932/Canon+PIXMA+MX860+Wireless+One+PhotoPrinter
    Even Windows people have trouble:
    "I NEED INTRUCTIONS ON HOW TO CONNECT MY HP LAPTOP TO THE CANON MX860 PRINTER."
    "I'm with you. I have my mx860 connected usb to my pc with the printer being shared but my wireless laptop can't find it no matter what I try."
    And, unhappy Vista person:
    "I had high hopes for this printer - it seemed to have it all. But the wireless feature never worked, it only worked on my gigabit network for about two weeks (only THREE print jobs including the test print), and never observed it to work via USB - Vista (x64 Ultimate) would throw an error saying it could not attach the device."

  • Can't send email with EDGE and Earthlink ISP

    I cannot send email using EDGE. Receiving email is ok. My ISP is Earthlink. I contacted Earthlink support and they admit they don't have a clue. I have trid the setting specified by Iphone users guide, Apple mail setup asst., Apple support docs, Earthlink, etc. Nothing has worked.
    Thanks for any help

    Thanks for everyone's input. For the most part,I got the same suggestions from everyone here,the Apple support docs, the Earthlink support docs, and Earthlink support rep. All to no avail. For others that have this problem.
    THE SOLUTION: You must plug in your phone to itunes, uncheck to sync, and eject the iphone. Then mannually setup the acccount as directed by the Apple support docs, same settings as shown in the Earthlink support docs.
    This worked for me.

  • Set up iCloud with iPhone and iMac, and all my calendar items disappeared from my iPhone.  Help?

    I had a full calendar on my iPhone4 before I activated iCloud on my iMac and iPhone.  All that's left on the iPhone calendar are a few birthdays.  Can someone please tell me how to sync my iMac with my iPhone via iCloud (boy, that's a lot of "i's")??

    If you are going to use iCloud then stop using iTunes. Set up 2 user accounts on your PC, one for you and one for her, in each account enter the correct iCloud credentials (ie: yours for you and hers for her), do not sync the items that are on iCloud with iTunes, it will make a mess.

Maybe you are looking for