Setting up server after upgrading to latest OS X

i keep getting this error and then setup closes. any suggestions?
An SSL error has occurred and a secure connection to the server cannot be made.

After I reset my computer name to the original name, prior to upgrade, keychain allowed me to get a new certificate. once that was done the installation proceeded.

Similar Messages

Iphone 5S issue after upgrade to latest version 8.1.2

hi,
recently i upgrade my phone to latest version 8.1.2 , brought me 2 new issue
1) siri - sometimes can't awake when using speak command " hey siri " in charging mode
2) battery stability - Battery start behave strange after > 35% , can drain to 19 or less in a seconds, previous version able to sustain until 3% before the device ready to switch off, now the device dead in 19~10% force device to shut off , when put the charging cable to phone turn on with battery meter approximately 30% >
i have this issue quite sometimes after upgrade to latest version
3) app crash- the devices sometimes crash, quit the app or freeze but this rarely happen
hope can come out some version to fix above matters, which can be such annoying especially the second issue as highlighted.
thank

RESOLVED - I can't believe it, but I have actually figured this out.
Getting frustrated with going in circles, I decided to dig into security options. First off, I opened Windows' Properties for the start-up icon for InDesign. Right off, I noticed under the Compatibility tab that InDesign was set to run in Compatibility Mode for Windows XP (Service Pack 3). This did not seem right, so I turned off the option to run in Compatibility Mode and re-started up InDesign. Low and behold, the option Window | Mini Bridge was now displayed! And it worked!
Sorry to have bothered you gentlemen with this problem. I really appreciate your assistance!
Mark.

SAP B1 APPLICATION IS RUNNING SLOW IN SERVER AFTER UPGRADE

Hi,
The sap application is running slow in server after upgrading it from 9.0 to 9.1 it's taking 5-10 secs to open a document after clicking it and its taking more time in client system.
what are the steps to be taken so that the application will run without any delay.
Regards,
Karthik B

hi please check bellow thread ,it may help you
Client Machines Logon to SAP Server is Very Slow
update the status
regards
AKR

After upgrade to latest firmware canon network printer won't print

after upgrade to latest firmware canon network printer won't print. It's a canon MP540 on a wireless network. It will print a test page but won't print from any application, just sits there with the message 'copying print data'!
Running Mac OS X Lion 10.7.2 (11C74), with firmware SMC Version (system): 1.73f63.
Any help gratefully received.

First off if you can print a test page there is absolutely no reason you wouldn't be able to print from a application...none. But stranger things have happened now that we have Lion. Within the application are you selecting the wireless printer........just had to check.
I have the MP620 which is simlar to your MP540 and have no problems printing from my MBA (June 2011). I too have the latest firmware and software......without problems printing.
A few things I'd try would be to remove the wireless printer from your computer (in Preferences, printers), restart, and repair permissions. Then add the wireless printer back, and see if it works. If not.....power OFF the printer and turn back on.
If the above fails reinstall the printer driver (yours) I think you will have to plug in the USB cable.
Keep me updated and I'll tyr and help!

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

I am unable to sync my iPad after upgrading to latest operating system. iTunes can't see my iPad when attached to PC. Anyone else having this problem?

Nicholas...
You may need to restart the Apple Mobile Device.
Follow the instructions here > iOS: Device not recognized in iTunes for Windows

Imac won't boot after upgrade to latest Yosemite

After Upgrading to latest Yosemite version - my Imac will not start - it just hangs there or eventually comes with Crash window tellling it will restart.
However the Imac does launch in safe mode - holding down the shift key -but then there is no sound - so that no good.
Can you solve this you will be the christmas hero in Danish land.
NB sofar I have tried
reset PRAM- reinstalled Yosemite - Verified Disk is ok.
iMac (27”, ultimo 2009) - 2,66 GHz Intel Core i5
Yosemite 10.10.1 (14B25)
Latest crash log
nonymous UUID: 273AE997-AFAA-D71B-8080-9D38EA80ADEB
Sat Dec 27 19:52:13 2014
*** Panic Report ***
panic(cpu 1 caller 0xffffff800d01e80a): Kernel trap at 0xffffff800d1338c3, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000010689fb25, CR3: 0x0000000124a97000, CR4: 0x0000000000002660
RAX: 0xffffff801aaa5df8, RBX: 0x00bfbfbf00bfbfbf, RCX: 0x0000000009000000, RDX: 0xffffff800d6f42d0
RSP: 0xffffff80a69bb460, RBP: 0xffffff80a69bb4b0, RSI: 0xffffff80a69bb507, RDI: 0xffffff800d6f42d0
R8: 0xffffffffffffffe9, R9: 0x000000000000003a, R10: 0xffffff8077cf3008, R11: 0x0000000000000000
R12: 0xffffff80a69bb4f0, R13: 0x0000000000000017, R14: 0x0000000000000017, R15: 0x000000000000031b
RFL: 0x0000000000010206, RIP: 0xffffff800d1338c3, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000010689fb25, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80a00bde10 : 0xffffff800cf3a811
0xffffff80a00bde90 : 0xffffff800d01e80a
0xffffff80a00be050 : 0xffffff800d03a443
0xffffff80a00be070 : 0xffffff800d1338c3
0xffffff80a69bb4b0 : 0xffffff800d331348
0xffffff80a69bb5a0 : 0xffffff800d331d55
0xffffff80a69bb740 : 0xffffff800d32aab9
0xffffff80a69bb7d0 : 0xffffff800d340ccf
0xffffff80a69bb9a0 : 0xffffff800d13f2f8
0xffffff80a69bba80 : 0xffffff800d13ea95
0xffffff80a69bbbb0 : 0xffffff800d152005
0xffffff80a69bbc00 : 0xffffff800d15fcc7
0xffffff80a69bbf20 : 0xffffff800d154f0a
0xffffff80a69bbf50 : 0xffffff800d44dcb2
0xffffff80a69bbfb0 : 0xffffff800d03ac46
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14B25
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x000000000cc00000
Kernel text base: 0xffffff800ce00000
__HIB text base: 0xffffff800cd00000
System model name: iMac11,1 (Mac-F2268DAE)
System uptime in nanoseconds: 88678398319
last loaded kext at 88213280354: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f8f484000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHDAHardwareConfigDriver 267.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.AppleTyMCEDriver 1.0.2d2

Hello snake-apps,
Welcome to Apple Support Communities.
The article below provides troubleshooting tips that’ll help resolve kernel panic issues, like the one that you’re seeing with your iMac after upgrading to OS X Yosemite.
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Ciao,
-Jason

After upgrading to latest version of iTunes it will not remember my podcast password as it did before

After upgrading to latest version of iTunes it will not remember my podcast password as it did before

Hey becky612,
Thanks for the question. I understand that your iPod nano is not recognized in iTunes after updating. The following troubleshooting articles may provide a resolution based on your symptoms:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

After upgrading to latest IOS while playing games screen is flickering

While playing games screen is flickering after upgrading to latest IOS.

I have taken it out of the case - I figured it would obstruct the sensor (also have no screen protector).
Only thing I haven't tried from the Basic troubleshooting steps you mentioned was to "restore as new".
That I did try it tonight (succesffully restored), BUT my problem still exists.
You mentioned to go in the MAC store > Would they replace it (for free) if they reach the conclusion it's some sort of manufacturer faulty wiring even if it's a 3Gs (as an old model)?
Would they still if phone had water damage (this I'm just curious - the phone didn't)?

Mavericks Mail not working properly with Exchange server after upgrade from Lion

Mail will no longer maintain a stable connection to my company's Exchange server after upgrading to Mavericks from Lion. Nothing has been changed on the Exchange server. It has only partially downloaded the messages that are on the server. It seems to download current messages when they hit the server. It has difficulty sending messages. When I send a message, it gets stuck in the Outbox. It is constantly losing the connection to the server. The problem is only occuring with Exchange email. My iCloud email works properly as well as a POP3 account.

No shortage of pre-existing threads on Mavericks mail issues...
https://discussions.apple.com/message/23706759#23706759
https://discussions.apple.com/message/23469853#23469853
https://discussions.apple.com/message/24277596#24277596
https://discussions.apple.com/message/23769976#23769976
https://discussions.apple.com/message/19077388#19077388
https://discussions.apple.com/message/24170482#24170482
https://discussions.apple.com/message/24483692#24483692

Popup LOV returns not found on this server after upgrading to APEX 3.2

The Popup Key LOV (Displays description, returns key value) does not work after upgrading to APEX 3.2 from APEX 3.0.
Don't now if the character set is relevant.
The database character set on APEX 3.0 was:
NLS_CHARACTERSET: WE8MSWIN1252
DAD CHARACTERSET: WINDOWS-1252
APEX 3.2:
NLS_CHARACTERSET: AL32UTF8
DAD CHARACTERSET: UTF-8
When clicking on the popup the message is "The requested URL /pls/apex31mb/wwv_flow_utilities.gen_popup_list was not found on this server.".
This error applies for both Firefox and IE.

Can't reproduce the error on apex.oracle.com, the popup works fine.
The only difference I notice on the environments is the database version (our: 10g, oracle.apex.com: 11g), but I can't see this have any influence.

Unable to connect to the MS Exchange server after upgrading to ios 7.1.2

I received a new iPad 4 through work. Upgraded to ios 7.1.2, but now I'm not able to connect to the Exchange server. Contacted IT through work, they have no idea how to correct it. They say all of my settings are fine. The error message says "Cannot Get Mail   The connection to the server failed." Any thoughts?

Appears to be a wifi connection problem. Did it work prior to the iOS update?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Since it's a company wifi, you won't be able to do many of these.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How to Change Your iPhone’s (iPad’s) DNS Servers
http://www.macinstruct.com/node/558
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have ipad-2 16 gb wifi after upgrading to latest software 4.3.5 my wifi icon is bleached and showing no wifi i tried resetting several times and also tried re booting it and i restored the software several times but still the problem remains please

Respected sir,
i have ipad-2 -16gb wifi. i recently upgraded to latest software 4.3.5 by using i tunes. after updating my ipad wifi icon is bleached and showing no wifi tried resetting several times and also tried rebooting it and i restored the software several times but still the problem remains please help me out.
waiting for your response.
i am using windows 7 operating system.
with regards
vinayaka

Vinayaka-
After all you've tried, Dah*veed is probably right about needing warranty assistance.
But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
Try unplugging your WiFi router for a few seconds. Then reset the iPad's network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect to your WiFi.
Fred

Photoshop CS6 can't save to server after upgrading to Mac OS Yosemite Server from Mac Lion Server

We recently upgraded our server from a Mac Pro 2008 with OS X Lion Server to a Mac Mini 2014 with LaCie 20TB 5Big Thunderbolt 2 RAID drive. Everything is working fine with the exception of Photoshop. It does it intermittently but once it happens it will continue to do so. We get message like "Can't save to disk because of disk error" and "Can't save file because of program error" . Sometime we are able to do a "save as" and save over it. Most of the time we have to "save as" with a different file name and then rename and recopy the file. We have check permission on all the file as well as the server HD has ignore ownership checked. Again only three things changed. 1) Sever hardware change from Mac Pro to Mac Mini. 2) Server software upgraded from 10.7 Lion to 10.10 Yosemite(both have the latest update). 3) Drive when from internal on Mac Pro to External Thunderbolt 2 LaCie drive. We have no problem with Illustrator or Indesign. Only Photoshop. Anyone with any suggestion is greatly appreciated.

Unfortunately you seem to be using Photoshop in a way that Adobe discourages, so you may not be getting a lot of helpful advice.
Networks, removable media | Photoshop | CS4 and later

After upgrading to latest 10.2 Youtube no longer works in fullscreen

Hello.
After upgrading to the latest version of Flash, 10.2, I can no longer see videos fullscreen in YouTube because all I get is a blank screen.
I’m using Internet Explorer 8 with not toolbars installed. My antivirus is ESET Smart Security with the Windows default firewall enabled.
My graphics board is an Intel Graphics Media Accelerator 4500M
PS: I’ve uninstalled 10.2 and installed again 10.1 and the YouTube problem was no present. So we can conclude that the problem lies in fact in the 10.2 version of Flash player.

Hi, Before you Uninstalled 10.2, did you happen to update your video card driver? This has helped others that were experiencing this issue. The Adobe Flash Player Team are investigating this issue and trying to have Users document certain
info so they can duplicate the issue in house.
I don't know if you'd be interested in providing some information on your experience, but this is the site to do so.
http://kb2.adobe.com/cps/839/cpsid_83952.html#main_For_Windows_users
Part of the issue is the Technology for StageVideo, included with the latest FP version and the hardware acceleration. Updating the video card drivers and or turning off the hardware acceleration seems to solve it. However, documenting what is happening before and after is helpful to them.
Thanks,
eidnolb

Problems with set up disc after upgrading hard drive

I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB. The new hd is SATA, a WDScorpio. The pins on the end look the same, and I've had no problem with the physical install. When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon. I load the disc while holding down the "C" key, and all that happens is the disc gets ejected. What am I doing wrong? I also have my hd backed up w/time machine in an external hd. Any ideas?

Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

Setting up server after upgrading to latest OS X

Similar Messages

Maybe you are looking for