Setting width of Yes/No item type in jquerymobile

Dear all,
i am using apex version 4.2 on windows 7 in oracle 11g R2 64bit.
i have created one mobile application, i created one item which display as  Yes/No.
the yes value is INSTALLATION and the no value is TROUBLESHOOTING
Now when i run the application, the size of this Yes/No field is very small and none of the whole string is visible to the end user, i.e. only STALLATI  and ROUBLS are displayed.
instead i want to set the width properly so that the values display properly, i.e. INSTALLATION or if the user try to select TROUBLESHOOTING.
I tried to set the width in HTML Form Element Attributes with style="width=100px;" but nothing happens.
Kindly guide me accordingly.
Thank you.

Hi Maahjoor,
Maahjoor wrote:
Any hint with this problem please?
Thank you.
You have to find the CSS classes which is controlling the width of your Yes/No item by using debug tool like firebug(Mozilla firefox) etc.
I have tested for theme Mobile - 51 in Apex 5 and it is working for me
select Page -> Css -> Inline - >put the code given below
.ui-field-contain div.ui-slider-switch, .ui-field-contain.ui-hide-label div.ui-slider-switch, html .ui-popup .ui-field-contain div.ui-slider-switch {
    width: 10.8em !important;
Hope this helps you.
Regards,
Jitendra

Similar Messages

  • Possible to link item type to category?

    Hello,
    I've created some custom item types, and I've got some categories.
    Is it possible to link certain item types to a distinct set of categories?
    So item type 1 can only choose between category A and B, and item type 2 can only choose between category C and D ?
    Thanks,
    Ton

    hi ton,
    this is not possible. the problem is that you can choose category as an attribute for the custom item type. but the configuration of the available categories are done on page group level. the selection is then used for every item that has this attribute.
    regards,
    christian

  • Controlling of Input width for Password Item Type

    can we control the Input Width of
    password Item Type when the form creation.
    If the Item Type is Password for any field during the form creation, i want to control the Input Width for that field for good
    appearence.Pls tell me the solution.
    Thanks

    Through Functional configuration, this is not possible.  Please carry out coding corrections in USEREXIT_COBL_RECEIVE_VBAP as recommended in the following note.
    Note 1739319 - Cost center in Sales order item
    G. Lakshmipathi

  • How to set the default value of an item type DATE PICKER to the day of yest

    Hi
    How to set the default value of an item type DATE PICKER to the day of yesterday ?
    Thank you very much !
    Christian.

    Hi Christian,
    Have a look at this thread Re: Default the Date Picker to Today
    It covers this issue in detail.
    Regards
    Paul

  • Scanning: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.

    Good Day.
    I have recently discovered an issue with scanning.  I have tried scanning straight from the printer, through image capture, and through preview.  All yeilding the same results since they are essentailly kicking off the same scanning applet.  I can scan a jpeg formatted file as long as I applet is in the "Hide Details" mode.  If I click on the "Show Details" button, which I need to do to scan to PDF, I immediately receive an error stating: The image size is too big. Please reduce the image height, width, resolution, scaling or output type.
    I'm currently using an HP C5180 printer.   The most recently installed software was Adobe Digital Editions (I installed this to read an on-line e-book).  Not sure if there is any correlation.    Thanks for any help.
    Mac details are:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,1
      Processor Name:          Intel Core i5
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B27
    Printer access log:
      Source:          /var/log/cups/access_log
      Size:          174 bytes
      Last Modified:          11/21/12 10:09 PM
      Recent Contents:          localhost - - [21/Nov/2012:22:09:16 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
    localhost - - [21/Nov/2012:22:09:20 -0500] "POST / HTTP/1.1" 200 61628 CUPS-Get-PPDs -
    Image Capture Support:
      Image Capture Support:
      Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Info.plist
      Version:          2.3.0
      Path:          /Library/Image Capture/Support/Hewlett-Packard/Devices/HPAiOScan.bundle/Contents/Resources/Dev iceInfo.plist
      Version:          2.3.0
    Photosmart C5100 series:
      Status:          Idle
      Print Server:          Local
      Driver Version:          4.0.0
      Default:          Yes
      Shared:          No
      URI:          dnssd://Photosmart%20C5100%20series%20%5B960B9E%5D._pdl-datastream._tcp.lo cal./?bidi
      PPD:          HP Photosmart C5100 series
      PPD File Version:          4.0.0
      PostScript Version:          (3011.104) 0
      CUPS Version:          1.6svn (cups-327)
      Scanning support:          Yes
      Scanning app (bundleID path):          -
      Scanning app version:          -
      Scanner UUID:          CC8DD435-CC8D-D435-CC8D-D435CC8DD435
      Printer Commands:          ReportLevels
      CUPS filters:
    Inkjet:
      Path:          /Library/Printers/hp/cups/Inkjet.driver/Contents/MacOS/Inkjet
      Permissions:          rwxr-xr-x
      Version:          4.0.0
    commandtohp:
      Path:          /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/comman dtohp
      Permissions:          rwxr-xr-x
      Version:          2.1.1
      Fax support:          No
      Printer utility:          /Library/Printers/hp/Utilities/HP Utility.app
      Printer utility version:          5.9.1
      PDEs:
    PDE.plugin:
      Sandbox compliant:          Yes

    Hello Sig
    The scanner works with a Windows computer, which proves the device is functional at a cursory level. The drivers are now distributed by Apple and this is an Apple computer. There is no scanning software provided by HP. HP's answer is that Mountain Lion takes care of all of this.  I anticipate that some setting or driver was somehow tweaked since the scanner had been working with Mountain Lion until a few days ago.  The device in question is an Apple product. So, I'm pretty confident that I'm in the right place.
    Regards

  • Unable to change gl account in purchasing document rows of item type(8.8 ve

    Hi all,
    In previous sap b1 version ,in purchase document rows of item type -- system allows to change the gl account in rows.
    But in current 8.8 it is missing ,can any one know how to activate this or is there any logical reason to lock this.
    Regards,
    Naresh K

    Hi Chandra,
    In some older version this was possible. This was changed as this is the stock account to avoid usage of incorrect account and valuation report issues.
    If you want a specific stock account for the item change you can define that on the item master data. Set it to Item Level and then change the GL account.
    Hope it helps,
    Jesper

  • I have CS6 in a disk and I can't install it,I get a window with my name and asking for a pass word,the window reads like this:set up wants to make changes type PW to allow this.I type my adobe PW and it doesn't work.I am stake in that step.

    What can I do?I can't install CS6 in a disk.I get a window reading:set up wants to make changes type PW to allow this.
    Type my Adobe PW and is not that.This is frustrating!!!!Downloading, Installing, Setting Up

    Hello ozne,
    as a first step please have a look at these "General infos about the Adobe Account"
    https://www.adobe.com/account.html and http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    Did you purchase your product from these firms like Amazon? If yes, this is not a serial number, only a code with which you can request a serial number from Adobe. Please have a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
    The following part, so I just see at least, ceased to exist on my Adobe website, everything takes place in the link from above. I leave it as an info yet, it might still fit for you. For this purpose, please click your way through to your Adobe Store and find the button "Get Serial Number". Fill in the form and after a while you will get the real serial number.
    Good luck!
    Hans-Günter

  • Set as default value the Item Category in the Maintenance Order

    Hello everyone,
    We are trying to find a user exit in order to set as default value the item category in the Maintenance Order once the Material has been introduced (Tag Components).
    SAP Customizing let the user set the Item Category automatically per Material Type, but we need to set different Item Categories to materials belonging to the same material type.
    We would really appreciate any help relating this issue.
    Thank you very much,
    Víctor Liedo

    Dear Paul,
    Thank you very much for your response.
    I had already tried customizing mentioned by Pithan, but it did not work because we need to set different Item Categories for Materials with same Material Type.
    We have been searching for exits which may let us set Item Category in the Maintenance Order, but it does not seem to be possible.
    What you say about adding some custom validation through user exit, not to set item category as default value, but to check if the one entered is valid, sounds the best way of achieving our commitments.
    I have tried to look for CNEX0037 & CNEX0038, by using transactions SE37 and SE38, search for programs and functions modules, but it did not work. Could you please tell us what kind of objects are?
    Thank you very much in advance.
    Víctor Liedo

  • How to set the value of application item using pl/sql in application process

    Hi guys,
    I want a global variable (application item) whose value will be set at the start when a user logs in to the application. The value will be retrieved from database using a sql query. I do not know the exact syntax to set the value of application item in application process. Also i want to know in which type of application process should i use to set the value of application item when a user starts a session. The value of application item varies from user to user.
    Please help.
    I am using apex 4.2
    Regards,
    Waqas

    You can use the application item as bind-variable with its name. ie. your application item is named G_MY_APPLICATION_ITEM, then you can access/set it using :G_MY_APPLICATION_ITEM.
    For example
    BEGIN
        -- assign like a variable
        :G_MY_APPLICATION_ITEM := 'LARRY';
        -- use in a SQL statement
        SELECT WHATEVER_COLUMN
          INTO :G_MY_APPLICATION_ITEM
          FROM MY_TABLE
         WHERE USERNAME = :APP_USER
    END;
    Peter

  • How to set width of cfgid in percentage?

    I have to make the cfgrid compatible irrespective of screen size. But it is not taking width in perecntage(giving error : Attribute vallidation error, height/width can not be given in percentage.)
    I put the cfgrid inside a div and set width of the div as 100%, but it has no effect on the cfgrid.
    Can anyone please give me a solution??
    I will be thankfull towards any helpfull suggestion.

    Then you have to find a way to get the browser to send information about screen size to ColdFusion. One way to do it is by means of AJAX. Another, in my opinion much simpler way, is to get Javascript to store the screen size as a cookie, and then to get ColdFusion to read the cookie. I was thinking of something like this
    <script type="text/javascript">
    var browserWidth = screen.width;
    var browserHeight = screen.height;
    var expiryDate=new Date();
    /*set expiry date tomorrow*/
    expiryDate.setDate(expiryDate.getDate()+1);
    document.cookie= 'browserWidth='+browserWidth+',browserHeight='+
                                browserHeight+',expires='+expiryDate;
    </script>
    <cfset percentWidth = 90>
    <cfif isDefined("cookie.browserWidth")>
        <cfset browserWidth = cookie.browserWidth>
    <cfelse>
        <cfset browserWidth = 800>
    </cfif>
    <cfset gridWidth = int(percentWidth*browserWidth/100)>
    <cfform>
    <cfgrid format="html" name = "myGrid" width="#gridWidth#">
    </cfgrid> 
    </cfform>

  • How to set width for this modal dialog box?

    Hi All,
    How to set width to this modal dialog box:
    <input id="btnVote" onclick="javascript:SP.UI.ModalDialog.showModalDialog({ url: &#39;../Lists/Sports%20Activities%20Voting/NewForm.aspx&#39;, title: &#39;User Survey&#39;}); return false;" type="button" value="Vote"/>
    Thanks in advance!

    set as bellow:
    <input id="btnVote" onclick="javascript:SP.UI.ModalDialog.showModalDialog({ url: &#39;../Lists/Sports%20Activities%20Voting/NewForm.aspx&#39;, title: &#39;User Survey&#39;,width:700,height:350}); return false;" type="button" value="Vote"/>
    yaşamak bir eylemdir

  • Building Site CSS Safari Problem, no set width?

    Strange problem in Safari, i have a image holder and a description for the image below both floating left, done as a class so you can have another one along side with a different image.
    The image holder doesn't have a set width because the image that goes into it will be varying widths.
    This for some reason does not work in Safari, see here
    Its bizarre because it works fine in IE,FF etc
    Can Safari only render using a set width? Or is there a hack around it?
    Any ideas?

    Here's the thing. I see some items which could be causing
    problems. However, we need to fix the basics before going too far
    into this or you will end up with more problems than when you
    started.
    Run your pages through the validator (
    http://validator.w3.org/ ) and
    fix those errors first. Your problems here seem to be identical on
    both pages. For instance, you have an extra head tag, you have
    <style> tags in the middle of your document (these are only
    allowed in the head), etc.
    Go through those and once you have eliminated the errors from
    the validation we can solve your problems with the
    positioning.

  • Item Type "List Item" dosn't work

    I've tried to give the item type of a item to List item
    After compiling, I launch the form and I get this:
    NoClassDefFoundError
    Plugin Java 10.7.2.11
    Version JRE 1.6.0_31-b05 Java HotSpot(TM) Client VM
    Could it be because of something incompatible in my versions? But it's first time it happens (only with List items)
    Database: Oracle 10gXE
    Forms Builder: 10.1.2.0.2
    JRE: 1.6.0_31
    Jinitiator: 1.3.1.22
    Thanks in advance!

    This error should only appear when you use a list-item with the list-type set to combobox. A combobox in forms is a listitem where you can also enter your own text. If you nly need a dropdown list, set the liststyle to poplist. This works also without patching. if you really need the combobox, patch.

  • Setting width for a OAMessageStyledTextBean

    is there any way to set the width for a messagestyletext item inside a table
    at design time or at run time
    thanks

    Set the length property.
    But in case the length of the values are less(and there are more columns to display), OA framework would automatically decrease the width of this column to make space for other columns.

  • FRM-41014: Cannot set attribute of null canvas item PO_REQ_HDR.ATTRIBUTE8

    I am Doing Form Personalization on Dff in Requisition Headers form. My Requirement is
    requirement is like this
    Segment1 : Requsition Type
    Segment2: Project ID
    Segment3: CAF ID
    ATTRIBUTE7 will have two values
    1. Capex
    2. Opex
    if user selects Capex.. then ATTRIBUTE8 and ATTRIBUTE9 are manadatory
    otherwise optional
    i did personalization
    In Condition Tab:-
    I took Trigger Event as When-Validate-Record
    Trigger Object as PO_REQ_HDR
    Condition :PO_REQ_HDR.ATTRIBUTE7='Capex'
    When i validate it gives The Condition evaluates to false
    In Action Tab:-
    Type Property
    Language All
    Object Type Item
    Target Object Po_REQ_HDR.Attribute8
    Property Name :Required
    Value:True
    then i Pressed Apply Now then It fires Error:: FRM-41014: Cannot set attribute of null canvas item PO_REQ_HDR.ATTRIBUTE8
    Can Any one please sujjest what is the Cause of this Error.
    I am Using 12.0.4 application version.

    Please see these threads.
    Re: Personalization Problem
    How can I make a DFF segment diappear?
    Thanks,
    Hussein

Maybe you are looking for