Settings for RoadMap UI Element

Hi all,
is it possible to influence the width of an RoadMap UI Element? How can I do this?
Thanks in advance,
Torben

Hi Deepthi,
Check out the Webdynpro Component WDR_TEST_EVENTS -> View Roadmap.
And you can also look at this link:
[http://help.sap.com/saphelp_nw04s/helpdata/en/03/ac884118aa1709e10000000a155106/frameset.htm|http://help.sap.com/saphelp_nw04s/helpdata/en/03/ac884118aa1709e10000000a155106/frameset.htm]
Kind Regards,
Roelof Albers

Similar Messages

With Premiere elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Codec and Aspect settings for a crisp video and a small file size?

With Premiere Elements 11, when Publish/Share (saving) a finished video, selecting H.264 .mov file type, what are the recommended Aspect and Codec settings , for a crisp video with a small file size?

Gary Krouse
We will customize a very detailed reply, but
(a) What are the properties of your source media?
(b) What did you or the program set as the project preset to match the properties of the source media?
(c) What specific requirements do you have for this H.264.mov export file?
File size can be a compromise between bitrate, file size, and quality.
Thanks.
ATR

Correct video settings for a Nikon D300s to input into Adobe Premiere Elements 10?

I understand that it is critical when using Adobe Premiere Elements 10 that the video settings of your project match the settings of your camera. I want to upload video from my Nikon D300s DSLR which has the video setting options of 480P (640 x 480), 576P (720 x 576), 720P (1,280 x 720), and 1080i (1,920 x 1,080). I will primarly be making videos either to upload to You Tube, or save on a dvd. Can anyone tell me which would be th right settings for my camera and Premiere?

It depends on which resolution you're shooting your videos in.
It looks like that cam shoots in 1280x720 at 24p. There should be a DSLR project setting for that.
But if the camera shoots in all of the video modes you've listed, you can shoot it in any -- just make sure to select the DSLR project settings that match the video.

Make Default Settings for cost element -OKB2

Hi,
What is the importance of the this process?
Please give your views, I have read the information provided by SAP.
Regards,
Pankaj

Hi
This process is for creating Cost Elements.
We can create Cost Elements in FS00 by selecting Edit Cost Element and giving Validity Period and Cost Element category.
We can create Cost Elements in KA01 also.
In the above 2 processes we can create a single Cost Element only at a time.
If you want to create more number of Cost Elements at a time, then you need to do the Process of Automatic Creation of Cost Elements, Make Default Settings -->OKB2 , Create Batch Input Session -->OKB3 and Execute Batch Input Session -->SM35.
Regards
Venkat

Questions on cache and general RSRT settings for plancube

Hi,
we would like to:
1) set request status 1 in RSRT for our planqueries, in order to automatically refresh the query after executing a planfunction (problem we have now is that the results of a planfunction are not automatically updated in the query. Only when doing something else like executing other function, saving, check locks, ... the results are visible).
2) activate delta cache for our planqueries
we have read OSS note 1136163 on RSRT settings. It says:
Aggregation level "A" is implemented internally by the automatically created query "P/!!1P" (plan buffer query). This query acts like an InfoProvider. It reads the data of the database or provides the data from InfoProvider "P", it adds the data of the delta buffer "Dp" (or the delta buffer Dpi if P is a MultiProvider with several PartProviders Pi that can be planned) and transfers the data manager as data of the InfoProvider "A" of type "ALVL". The query "P/!!1P" can use aggregates and the cache; this is exactly like each normal query in "P". If "P" is a MultiProvider, it is useful to set PARTITIONMODE to "1".
              For the query "P/!!1P" that is created automatically for an aggregation level or for all aggregation levels using the InfoProvider P, we recommend the following setting:
              Read mode "H", request status "1", cache mode "1" or higher, delta cache "true" and SP grouping "1".
              Furthermore, the selection to use the structure element (KIDSEL) should be "true".
              The input-ready queries in "A" should not, and cannot, use a cache. The request status is irrelevant since queries in "A" are automatically set to current data. The delta buffer does not currently support hierarchy processing. Therefore, aggregation level "A" cannot completely support read mode "H". For input-ready queries at A:
              Read mode "X", request status "0", cache mode "0".
             The delta cache and SP grouping are not visible
Problems we have:
1) for query P/!!1P (PCA_AGQF/!!1PCA_AGQF in our example) does not allow changing the request status (greyed out). It now has value 0 instead of 1. It also does not allow to activate the delta cache flag. How to change this? In RSDIPROP we have set partitionmode to 1 for the multiprovider and activated the delta cache flag...
2) can we use the cache / delta cache principle for our planqueries? If so, how to ensure these settings remain activated in RSRT?
regards
Dries
regards
dries

Hi,
To change the cache settings for your cube.
Open the cube in RSA1 and click in 'Chance'.
- click in the 'Environment' menu;
- expand 'InfoProvider Properties'
- select the option 'Change'.
You will be able to set the cache mode for this provider.
I don't think it will be possible use cache for a multiprovider, it is
not possible.
Regards,
Amit

How to change settings for all users?

Hi All,
In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
Best Regards,
Arti.

Hi Arti,
In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
Try the first one and I hope you will get the solution.
Regards,
Nishit Jani
Award points only if you find the information useful.

Purchase requisition for service activity / element cannot be generated

Dear SAP MM Experts,
This is a service Creation from the PM order to Purchase Sercive Requisition.
The Error Message Is Generated :Purchase requisition for service activity / element cannot be generated
Diagnosis
Due to the system settings, the system is trying to generate a purchase
requisition for a service activity or a service activity element.
No service package has been created for the activity/element.
As a result, the system cannot generate a purchase requisition.
The activity/element is created or released, but the indicator for
generating a purchase requisition is not set.
Create a service package for the activity/element and then generate a
purchase requisition.
regards,
A S

Solved From PM side

Color management settings for the best print output

Color Management while Printing has been one of the challenging areas which has been discussed a lot over user forums and has been a painful area in terms of clear understanding while taking print outputs.
Here is an easy-to-understand KB (Knowledge Base) article ‘Color management settings for the best print output’ to help you get the best from your printers using PSE and bridge that knowledge gap.
This article explains color management in Photoshop Elements, how to get better prints, and addresses some of the following issues like horizontal/vertical streaks in print output, too dark or too light print output, ICC profile problems and Color differences between prints from PSE and other applications.
Thanks,
Garry

Thanks Noel.
Yes have shared in PSE forum as well. But I usually drop such posts on PS General forum so community moderators as well as our power users who mostly use both PS or PSE or are aware about can communicate to their students, audiences etc.
The idea is to reach out the message to as many as folks via relevant forums. Most of my otehr posts have found mentioned only on PSE forum.
Thanks for the feedback Nice to hear such a great feedback within 5 mts of publishing
Regards,
Garry

Cannot click on steps in RoadMap UI Element

Hello experts,
Is it possible to select a particular step on the RoadMap UI element, by clicking on it?
The idea is to be able to click on a step and be able to navigate to the content of that step directly instead of clicking through Prev/Next.
I do not see an "OnClick" event on a Step wherein I can create a handler. I am on NW 7.0 SPS15
Regards,
Puja

Hi Puja,
I guess you are takling about the step being highlighted with some different color when the user selects the step . if it is so then there is definatly an option for highliting the step with a color when you click on it . Let me expalin you a very simple example by which you can understand iit more clearly.
Step 1. You create a steps for instance (3)(step1, step2, step3). so here when i try clicking it on each step 3 different compeonents needs to be called wiht the step being highlighted.
Step2:Create a node in the context say Roadmap (0:1) cardinality and attributes as (set_step(property as string) (set_next (wdy_boolean) set_previous (wdy_boolean).
Step2. In compoent controller of your component create 3 methods hope u are already aware of this.
set_step( ), Set_next( ), Set_previous( ). and in attributes of component controller "Navigate" and in importing values giv 'Target'. whcih will capture the the target when we click on the steps.
Step3: create inbound plugs and method Onselect.
hope you know the procees to be done futher.
Note: if you are not able to get the step as highlighted plz chekc in the method set_step wether the step values are being passed correctly if no then pass the value of step properly then i am sure that it will higlight the step when u click on it .
if you want the code for the above senario will surely send it to u .
GoodLuck!.
Regards,
Sana.

Shopping Cart - Default Settings for items

Hi all,
We are on SRM 7.0 SP05 classic scenario with backend ECC 6.0 EHP4. There is a requirement to retain shopping cart default settings so that user is no need to enter default values on each shopping cart creation.
We are intent to develop a custom WDA for users to edit their own shopping cart default settings, the values will be saved to user position attributes and extended attributes (including some customized attributes) at PPOMA_BBP. After that, default settings will be copied from attribute during shopping cart creation, for example:
Item Basic Data: Product Category <== extended attribute "Product Category" value which is set as default
Account Assignment: Account Assignment Category <== attribute KNT which is set as default
Assign Number: Cost Center <== attribute CNT, Asset <== attribute AN1, WBS Element <== attribute PRO (plus two custom attributes to hold value of Internal Order and Network)
Here are the questions:
(1) For GL account, we did not config combination of Product Category and Account Assignment Category in SPRO, we will create a custom attribute as mentioned above. However, where can we insert our coding to copy custom attribute value to default setting during shopping cart creation? Is class /SAPSRM/CL_PDO_USER_CONTEXT a candidate? If yes, which method should be enhanced?
(2) For Delivery Address, if we do not use standard address management and maintain value at attribute ADDR_SHIPT, we intent to use similar approach: maintain custom attribute and then populate to default settings. The same question is where can we insert our coding to copy custom attribute values to default setting during shopping cart creation?
Thanks.
Regards,
Donald

Hi Lee,
Please implement the following SAP notes in SRM 7.0
There is a product bug in SRM 7.0
1. 1450367-Default settings for Acct assignment.
2.1442277 -Default setting for delivery address.
hope it will solve your problem
Regards
G.Ganesh Kumar

R3 settings for IDOC-IDOC scenario

Hi,
For IDOC to IDOC scenario what are the settings we have to in R3 System other than XI configuration settings.
What are setting for both sender and receiver side.
Thanks,
Kishore

Hi Kishore,
http://help.sap.com/saphelp_nw04/helpdata/en/18/22b800773211d396b20004ac96334b/content.htm
http://www.erpgenie.com/index.php?option=com_content&task=view&id=346&Itemid=57
http://searchsap.techtarget.com/loginMembersOnly/1,289498,sid21_gci994575,00.html?NextURL=http%3A//searchsap.techtarget.com/expert/KnowledgebaseAnswer/0%2C289625%2Csid21_gci994575%2C00.html
http://www.thespot4sap.com/Articles/SAP_ALE_Other_Concepts_Conclusion.asp
Refer this material..
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
Try this..Hope this will help.
Steps to configuration(Basis) >>
1. Create Logical System (LS) for each applicable ALE-enabled client
2. Link client to Logical System on the respective servers
3. Create background user, to be used by ALE(with authorizaton for ALE postings)
4. Create RFC Destinations(SM59)
5. Ports in Idoc processing(WE21)
6. Generate partner profiles for sending system
The functional configuration(Tcode: SALE)
Create a Customer Distribution Model (CDM);
Add appropriate message types and filters to the CDM;
Generate outbound partner profiles;
Distribute the CDM to the receiving systems; and
Generate inbound partner profiles on each of the clients.
Steps to customize a new IDoc >>>
1. Define IDoc Segment (WE31)
2. Convert Segments into an IDoc type (WE30)
3. Create a Message Type (WE81)
4. Create valid Combination of Message & IDoc type(WE82)
5. Define Processing Code(WE41 for OUT / WE42 for IN)
6. Define Partner Profile(WE20)
Important Transaction Codes:
SALE - IMG ALE Configuration root
WE20 - Manually maintain partner profiles
BD64 - Maintain customer distribution model
BD71 - Distribute customer distribution model
SM59 - Create RFC Destinations
BDM5 - Consistency check (Transaction scenarios)
BD82 - Generate Partner Profiles
BD61 - Activate Change Pointers - Globally
BD50 - Activate Change Pointer for Msg Type
BD52 - Activate change pointer per change.doc object
BD59 - Allocation object type -> IDOC type
BD56 - Maintain IDOC Segment Filters
BD53 - Reduction of Message Types
BD21 - Select Change Pointer
BD87 - Status Monitor for ALE Messages
BDM5 - Consistency check (Transaction scenarios)
BD62 - Define rules
BD79 - Maintain rules
BD55 - Defining settings for IDoc conversion
WEDI - ALE IDoc Administration
WE21 - Ports in Idoc processing
WE60 - IDoc documentation
SARA - IDoc archiving (Object type IDOC)
WE47 - IDoc status maintenance
WE07 - IDoc statistics
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC Creating IDoc Type from Change Pointers
RSEOUT00 Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
You can directly create an iDoc using some transaction like...
Use TCODE bd10 - to Send Data
and TCODE bd11 - to Get Data
and you can check the IDoc List using TCODE we02.
As you want step by step procedure.
1. Define Logical System and Assign Logical System
TCODE sale
2. Define RFC
TCODE sm59
3. Define Port
TCODE we21
4. Define Partner Profile
TCODE we20
5. Define Distribution Model
TCODE bd64
6. Send Data
TCODE bd10
7. Get Data
TCODE bd11
8. IDoc List
TCODE we02
There are basically two types of IDOCs.
Basic IDOCs
Extended IDOCs
Idoc Components
Basic Idoc
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extension Idoc
Extending the functionality by adding more segments to existing Basic IDOCs.
Creation of IDoc
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Create IDOC Type
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
u can also check all these links related to idocs
http://www.allsaplinks.com/idoc_sample.html
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sappoint.com/abap.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEIO/BCMIDALEIO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDALEPRO/BCMIDALEPRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDISC/CAEDISCAP_STC.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVEDI/CAEDI.pdf
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseCategory/0,295197,sid63_tax296858_idx0_off50,00.html
http://sap.ittoolbox.com/documents/popular-q-and-a/extending-a-basic-idoc-type-2358
http://help.sap.com/saphelp_47x200/helpdata/en/dc/6b7eee43d711d1893e0000e8323c4f/frameset.htm
Reward points if this helps
Regards
Pragathi.

Different user settings for scrolling in tables or ALVs

Hi Experts,
I have a strange problem.
I have a Web Dynpro Application that uses the UI Element table. For one user who uses it the scrolling mode is a scrollbar and for an other user the scrolling mode is a paginator. That appears not only for this application. ALL applications on the system have this difference for users. So, not only in tables does that appear. In ALVs too!
Does anybody know where I can configure this for every single user?
Thanks a lot!
Best regards,
Ingmar

The only thing I can figure is that the user getting the paginartor has accessibility turned on:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/19/e64941bfb4de2be10000000a1550b0/frameset.htm
That is the only option I know of that should override the system or application settings for scrolling. In particular accessibility can be turned on at the user profile level:
To do this, in transaction SU01 for your user name choose the tabstrip Parameters, insert the parameter ID ACCESSIBILITY_MODE with the value X, and save the entry.
Or within the portal:
To do this, in your user profile in the portal, under General Information select option Activate Accessibility (Screen Reader Required) and save your entries. This specification is evaluated by Web Dynpro ABAP.

Publish and Share Settings for Storing on Amazon S3 and linking on blog, in autoresponder, etc

I want to publish/share my Premiere Elements 11 video such that I can store it on Amazon S3 and then link to it in my blog, facebook, autoresponder. I know I DON"T want the Online settings because I am not directly uploading to YouTube, etc.
There are so many possible choices my head is spinning.
Are the settings for playing on a computer - what I want? And if so, exactly WHICH settings do I want? I tried the FLA settings, having read that flash is the way to go. But the final video looked really horrible. Please HELP! Thanks!

posturally
What computer operating system is your Premiere Elements 11 running on?
First, if you have not already, you will need to do some homework regarding Amazon S3 and its requirements for uploads to it for sharing purposes...requirements to include duration, file size, and formats (video and audio compressions as well as file extension), etc..
And, how is your Premiere Elements 11 project set up....
a. What is the project preset, and does the project preset match the properties of the source media?
b. What are the properties of the source media? (See Edit Menu/Project Settings/General and its readings for Editing Mode, Timebase, Frame
Size, Pixel Aspect Ration (even if they look grayed out).
Based on the above, now your choices for the export setting...assuming that 1080p30 (1920 x 1080 @ 30 progressive frames per second) is OK
with Amazon S3, then look at
Publish+Share
Computer
AVCHD
with Presets = MP4 - H.264 1920 x 1080p30
That will give you an AVCHD.mp4 (1920 x 1080 @ 29.97 progressive frames per second).
So, more details and a look at the AVCHD.mp4 export if applicable to your project settings.
We will be watching for your follow up and results. Please do not hesitate to ask questions or to ask for clarification.
Thanks.
ATR

Personalization of Roadmap steps in Roadmap UI element

Hi All,
I want to know of if it is possible to hide/unhide the Raodmap steps in the Roadmap UI element at runtime. When I do ctrl + right click, the entire roadmap is hidden.
Thanks,
Pooja

HI Pooja,
for personalizing i hope this would help u better :
Changing the position and visibility of UI elements for example, for fields and tables.
· Adding or changing additional interface information for example changing the button text or adding quick infos.
· Role-specific changing of interface labels.
· UI element roadmap: Removing individual, unneeded process steps.
· Statically changing individual field attributes.
· Changing the alignment of individual UI elements for example, line starting point, align right, centered alignment.
· Wider selection of fonts and colors for the interface layout
Hope this might help u.
For further ref check on to this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/11/01754276e4c153e10000000a1550b0/frameset.htm
Regards,
Nagarajan.

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Settings for RoadMap UI Element

Similar Messages

Maybe you are looking for