Settings in SMQS

Hi Everybody,
What are the defaut settings for SMQS in R3 as well as BW. In our server the status is Inactive for all processes. And how to change or register?
Thanks,
Kush

Hi Kush,
Check this:
http://help.sap.com/saphelp_nw04/helpdata/en/af/d4fa40ee14f26fe10000000a1550b0/frameset.htm
Also,
http://help.sap.com/saphelp_nw04s/helpdata/en/62/73241e03337442b1bc1932c2ff8196/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/4c/cf5c3c3b067331e10000000a114084/frameset.htm
Assign points if it is useful.
Rgs,
I.R.K

Similar Messages

Settings for SMQS

Hi Everybody,
What are the defaut settings for SMQS in R3 as well as BW. In our server the status is Inactive for all processes. And how to change or register?
Thanks,
Kush

Hi Kushal,
SMQS sttings in BW:
In releases up to and including BW Service API 3.0C, data packages are transferred independently of any enhancements to outbound scheduling (QOUT scheduler) that have since been made available. Settings in the corresponding control transaction SMQS were not relevant. However, in some cases, it was necessary to explicitly deregister the BW destination (see SAP Note 673940).
With BI Service API in Release SAP NetWeaver 7.0 (Plug-In-Basis 2005.1), you can (optionally) switch control of the transfer to the standardized outbound scheduling of the queued RFC. The approaches differ as follows:
● Connected BI system has Release <= 3.5
Default remains unchanged. You perform the switch manually using the RSA1_TRFC_OPTION_SET program. (Prerequisite in Basis Release 4.6C is qRFC version 9 supplement 45.)
Alternatively, the BW destination can be deregistered automatically.
● Connected BI system has Release >= SAP NetWeaver 7.0
The default setting is changed; however, you can revert to the original setting using the program mentioned above.
If you are using standardized outbound scheduling, the number of processes used to transfer data packages to the BI system has to be maintained for the BI destination in transaction SMQS.
In this case, the global data transfer settings (see SAP Customizing Implementation Guide (transaction SPRO)--->Integration with Other SAP Components ---> Data Transfer to the SAP Business Information Warehouse ---> General Settings ---> Maintain Control Parameters for Data Transfer) only effect the number of processes that are used to transfer the data packages from the extraction process to the tRFC for the transfer.
For regestering Go through...
[http://help.sap.com/saphelp_nw70/helpdata/EN/af/d4fa40ee14f26fe10000000a1550b0/frameset.htm]
When Your destination is registered and the queue status changes from INACTIVE to ACTIVE, if the queues contain LUWs that can be processed for this destination. WAITING and WAITCONN appear if the maximum number of connections has been reached or if the scheduler is waiting for a connection to become available again. As soon as a connection becomes available, the status changes to ACTIVE and the queue is processed.
Regards,
NR
Edited by: N R Pradeep Reddy on Apr 9, 2008 7:27 AM
Edited by: N R Pradeep Reddy on Apr 9, 2008 7:28 AM

SMQS transaction and Vertex calls timeout

Hi,
    We just went live with one our SD projects. Before we went live we never had Vertex timeout issue, but after we went live we started getting 0 or 2 or sometimes 4 dumps in a day "CALL_FUNCTION_REMOTE_ERROR" The function where it dumps is RFC_CALCULATE_TAXES_DOC destination VERTEX. The description says "timeout during allocate" no connect of TP /usr/lpp/vertex/translink/verrfc from
host ansapap7 after 122 sec" .
RFC status: "CODE=CM_PRODUCT_SPECIFIC_ERROR CM_NO_STATUS_RECEIVED
CM_NO_DATA_RECEIVED SAPCODE=456 CONV=06153020"
RFC error text: "RFC_IO27"
CPI-C error text: "CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup
(check that partner exists) "
Wierd thing is that it does not happen all the times. It happens 3 to 4 times in a day, sometimes it happens only once and sometimes does not happen at all.
I checked the SMQS transaction, it shows destination Vertex, max connection 1, max timeout 60. With this setting since last 3 + years we never had timeout issue, then why now when we have some 500 more orders being processed per day. These settings are still working for majority of orders, only some orders could pass through and get this dump.
Can someone guide me what this problem can be. Also can someone tell me is it safe to change the max connections and max timeout parameters in SMQS transactions and will changing those settings help in solving this.
Thanks in advance
Pulin

I had checked 645527 note also. We have not upgraded SAP since last 3 yrs. Its still 4.7, we have not applied any upgrade patches. It started happening after we went live on November 4th 06.
I think, this is some load distribution issue. Should I change the settings in SMQS transaction. Is that safe ?
If any one of you are using Vertex with SAP 4.7 or higher, then can you tell me what is present in table TTXC. Does this table contain old RFC calls(RFC_CALCULATE_TAXES1) or new RFC names(RFC_CALCULATE_TAXES_DOC).?

Settings in SMQR and SMQS

Hello Friends,
Can some one please explain the generel explanations about below feilds in SMQS and SMQR transactions. I m not very familier if i have to change these settings. what do below fields mean...
SMQS:
Destination
Max.Conn.
Max. Runtime
W/o tRFC
Scheduler Monitoring
SMQR:
Queue name
Mode
Max. Runtime
USERDEST
Attempts
Pause
Scheduler Monitoring
Thanks for your help!
Regards,
Marry.

Hi Marry,
Please see the following link:
[http://help.sap.com/saphelp_nw04/helpdata/en/62/73241e03337442b1bc1932c2ff8196/frameset.htm]
Follow the menu path
Queueud remote fuction call -> qRFC Administration -> Outbound queue Adminsistration ->The QOUT Schduler
- This covers SMQS admin, including explanations of max conn and maxtime.
And path
Queueud remote fuction call -> qRFC Administration -> Inbound queue Adminsistration
(This doesnu2019t explain the Attempts and Pause fields. Check note 1579728 for an explanation)
(The above links will lead you to other very useful qRFC documentation.)
Iu2019ve added what I think are some important CRM Middleware considerations below
The most important thing to remember for SMQS is you must maintain all destinations to which queues are sent. Exceptions to the is would include, for example, mobile client destination, Groupware, BW etc - the queues that send data to these systems will remain in status NSOEND until requested from the other side. For such systems, data are added to the relevant queues but will remain in status NOSNED until the receiver actually requests the data (eg using conntrans for mobile clients. I don't know how it works with BW.)
For automatic processing, the destinations should be registered, otherwise queues will stay in status Ready until manually activated in SMQ1.
As far as middleware is concerned there are two main destination types. One is the R3 backend system (eg ECC, or ISU), also maintained as an ABAP connection in SM59.
If you use the mobile scenario, you also need to maintain another type. Destination SAPCRM_MW_RR_000 should be added in the client that exchanges data. If the client is, for example, 100, the main entry for SAPCRM_MW_RR_100 should be maintained in client 000. For performance reasons, these should be set to Excluded (shown as N) rather than registered. Please see note 480543 for more details.
SAPCRM_MW_RR_xxx destinations are defined as logical destinations in SM59.
In SMQR, the most important things is that all queues used by CRM Middleware should normally be registered. But you can use the wildcard - eg R3A, CSA can be maintained and registered. Then they will process automatically.
Normally the default settings are fine for the other various fields.
I hope this is helpful.
Brian.

SMQS - populating host id for new destination

Hi All,
We are setting up a new destination from our R3 to SCM system. We have added the logical system, partner profile, port, SMLG and rz12 settings but could not get the host id in smqs to get populated. Other old destinations are fine with populated host id field.
Checked QSENDDEST table and no host id also defined for our destination. The SMQ1 queue of our R3 is already cleared, checked our settings (see above) and see no issues. I have seen some threads around the net similar to this but none worked so far. Appreciate your help.

I know this was a long time ago, but did you ever get this resolved? I have the same issue and can still find nothing on google!
Simon

Due to my laptop screen failing i have to return to facory settings, can i reinstall adobe reader and adobe air afterwards?

Due to my laptop screen failing I have to return it to factory settings, can I reinstall adobe reader and air afterwards?

I don't see why not. Do you foresee a special difficulty?

After Drive Replacement, iTunes Points To Wrong Folder Even After Adjusting Settings

I moved my music to a new hard drive. I then adjusted settings within iTunes to "point" to the folder on the new drive. The folder name is identical as are all the files within it. I did this a few months back and had no issues once iTunes "located" my files. All files played, playlists remained intact. This time however only a small portion of my files successfully "located" and the remaining 75% are unplayable. When "shown in finder", the unplayable tracks point to a completely random folder within my mail folder of obviously non-music files. I've been searching for weeks how to fix this to no avail. I definitely do not want to lose my playlists, play counts, etc. so starting from scratch with iTunes is not an option for me. Please advise how to fix this very odd issue!
iMac 3.4 Ghz i7
OSX 10.8.5
iTunes 12.0.1.26 (just updated)

To resolve this we will need details. I don't know exactly what is where. Even though it "worked last time" I see people post with that and almost invariably there is something different in the scenario this time.
The iTunes application alone has no idea where media files are. You could drag all the media folders you like to the Media folder and it won't know. You could "point" iTunes to that folder in preferences and it still will never look there. iTunes knows where files are because as you add them to iTunes it puts them in the Media folder and makes a note in that .itl file where the files are located. When you try to play a track iTunes looks up in the .itl file which media file it should try to play when you request the track and goes to that location to play the file. If there file isn't there you get ! You have to mend the links one by one, or iTunes might try, based on you repairing links. to repair other links, but it doesn't usually work that way and is only partly successful at times (as we have already discussed). If you have ever walked into a store and see an empty shelf but their web site says they have 3 in stock and the sales person says all their stock is out on the shelf, iTunes is like that.
Here's a bunch of links on how iTunes works. As you can see, an entire library is a whole bunch of files and support folders working in concert and when they get split up iTunes starts misbehaving.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 and making an iTunes library portable.

Downloader doesn't retain previous settings

Can Bridge Downloader be set to always open with the advanced dialog box and can it be set to retain the previous settings? Also, is there a Preferences for the Downloader? I can see it listed in the menu, but it's ghosted.
It would be a real time-saver if I didn't have to re-enter all the info each time I open the Downloader -- and then start all over again because I missed something and it downloads to the wrong drive/folder or creates dated folders when I don't want them or doesn't enter copyright info in metadata... you get the idea.
Thanks for any help with this.

it doesn't increase my faith in Adobe software when following their procedure that I'd also have to search the system to purge it manually. It begs the question: why did I use the latest Adobe un-installer and the latest Adobe Cleaner
That's an understandable question and I have no certain answer for that, I'm only a user, not a technician
But I like to think that in normal ways an uninstall keeps certain files like settings and cache as it is so you won't have to go through that work again when installing upgrades. Further guessing is that the clean tool does get rid of the hidden and/or invisible preference files but not the cache, hence my suggestion to check anyway.
it's annoying that the Rotate tools were moved off the toolbars,
They are not, you just haven't selected the 'path bar' option under the menu window, put a check mark in front of it in the menu Window and they are there with other useful tool icons. Aside from that Bridge stills keeps deselecting the path bar every now and then. But my hopes for CS6 on resolving that item are high.
and having the Favourites and Folders under separate tiny icons is equally irritating and mousey.
You are right, they are tiny but you can design your own lay out. I have both under each other in one column with a very short favorites panel and a very long folder panel. Grab a folder tab and drag it. You will see there will appear blue lines surrounding the panel. You have three columns to work with, one bleu line (either vertical or horizontal) appears at the position were you can drop the selected panel in it's new lay out. A surrounding blue line means nesting in a panel with multiple tabs. In the beginning this is a bit tricky but you will get used to that. When your happy with the customized lay out save it as a new workspace. Plenty of options!
In PS 12.x, the implementation of the Adjustment Layers panel is also beyond belief!
This sounds as you don't like it while others (me included) are very very happy with it! You just have to get used to different ways of working, once tried a while and getting used to it you don't want to go back, trust me (besides, the shortcuts for adjustment layers still work to my knowledge and if not you can assign them yourself in a custom menu setting).
The problem with not upgrading to any new cycle is that the differences with prior version can get huge. It should so because software needs development and users need to get used to it. I can't tell you how often I have changed my workflow due to new methods (and knowledge) and the majority of this changes have brought me great benefit

How do I get loops to keep the effect settings I hear when previewing?

When I place loops into a new track, the effects settings go away and it is simply a dry signal. How can I move a loop from the browser into a new track and have it keep the effects settings that I hear when I preview the loop?

If you drag a green MIDI loop onto the Arrange window space, it should create a Software instrument track with all the required plug-ins for the sound, so don't drag it to an already existing Software instrument track.
If you drag it to an audio track it will convert it to an audio file, so obviously the instrument/fx plug-ins wont be in the channel strip.
If that's what you mean?

Why does "itunes accounts" use data with all settings OFF?

Does anyone know how to keep "iTunes accounts" under system from using cellular data?
I have already:
1. Toggled OFF all settings in the "Use cellular data for" menu.
2. Turned OFF all automatic downloads and any other options under iTunes/app store settings.
3. Turned OFF Background App refresh.
4. Turned OFF all options under iCloud sync menu.
Right now, the only thing that keeps "iTunes accounts" from pulling cellular data is turning Cellular Data completely OFF, but I don't want to do this because I lose some messaging and voicemail functions and I need to be able to use Find My Phone. I have two identical iPhone 5c's on this account. One is running iOs 8.1.2 and the above settings control it's data usage nicely. The other phone is running iOs 8.1.3 and this one uses 50-100 mb a day even with all the above settings off and the phone almost always on wifi.
I am aware that the phone will lose it's wifi connection when asleep, but that shouldn't be a problem if all the apps/settings are already set not to use cellular data. What am I missing. I've read a bunch of threads on this issue and they all suggest settings I already have OFF.

My personal phone is on 8.1.2. My daughter's phone is 8.1.3.
It is her phone that is currently having this problem, but I reported it under my account; sorry for the confusion.
My phone has had some data problems in the past, but I have been able to control them by keeping almost all data options OFF and the overall switch ON. My usage is back to less than 50 mb per month which makes sense since my phone is almost always on wifi and I don't use data dense applications.
Everything about my daughter's phone is the same as mine except for the 8.1.3 upgrade. She does use things like Instagram more than I do, but I have them all set to not use Cellular Data and the option to change these settings is locked. When I look at the usage on her phone, it isn't her apps that are pulling unexpected data; it's "iTunes accounts" under system services. All the options under iTunes/App Store (auto downloads, home sharing, etc.) and all the iCloud options are already OFF.

How to connect sound or audio to my tv using hdmi adapter. I tried to connect thru sound settings but my tv is not found.

how to connect sound to my tv set using hdmi adapter. Im using 2009 macbook pro 13". I went to sound settings then output and it shows internal speaker built- in, it wont locate my tv set. pls. help, thanks

You probably can't because it looks like your MacBook Pro is too old to carry audio over HDMI. You will need to run a separate audio cable from the audio out port on the MacBook Pro to the audio in port on the TV.
Check your MacBook Pro model year against the list in this Apple tech note:
About Mini DisplayPort to HDMI adapters
Learn about the Mini DisplayPort in the latest Mac models that enables audio and video output for DisplayPort and HDMI.

Using Mini DisplayPort to VGA adapter -- any settings on the Macbook Air I need to change?

Going into a meeting with my Macbook Air with Mini DisplayPort to VGA adapter, which will be connnected to a video projector on site. Never tried this setup before. Will this just work or do I need to adjust any video settings on my Macbook Air?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

I want to Sync my iPhone 4 to iTunes however I get an error message from iTunes each time I connect the phone to the PC saying that I should restore to factory settings. Frustrating because it's already annoying enough that I can't drag and drop mp3's!!!

I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

I have dloaded and reloaded firefox 7 b4 i had firefox 5 now after system restore and proxy setting changes an d default settings fire fox still will not open what am i doin wrong

ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

Settings in SMQS

Similar Messages

Maybe you are looking for