Settings Link in ALV
Hi
I have developed an application using ALV in webdynpro ABAP. Now am crossing across a wierd behaviour. The SETTINGS link above the ALV table gets disabled and also the standard view dropdown is invisible. Also am getting a message "Table does not contain visible columns". This happens only for certain user ids and not all.
Can anyone throw lights on what could be the problem?
Thanks
Karthik
Hi Karthik,
I think I know the issue. This happens when you go into the setting tab of the ALV, delete all columns and save it as a view variant and set it to default view.
Run the application standalone and set it right.
Regards,
Gaurav
Similar Messages
-
Modify "standard view" settings for an ALV in a WD4A view
Hi fellow developers
I have placed an ALV on WD4A view.
In the WDMODIFYVIEW I try to manipulate the ALV settings but somehow the settings of the "standard view" overrule my commands.
The settings of the "standard view" are not modifiable from within the function.
Is there a possbility to change the settings of this "standard view" that is being used for this ALV?
Kind regards
Wouter Heuvelmans
Pyramid Applied SolutionExecute your application in administration mode, afterwards you can change the settings using settings link of the ALV and save the same as part of "Standard View". If you want settings only for a user then ask user create a view of there own and set the same as default view.
Even if you maniuplate ALV Layout settings ( other then Initial settings set during ALV call ) the same will be overruled by the default view set in the ALV i.e. Initial settings.
Regards
Rohit Chowdhary -
Move filter and settings in WD ALV toolbar to the left ?
Hello WD abap experts,
The WD ALV has one big disadvantage: When you have many columns, the alv table is very wide and if you then want to set the filter or change settings, you have to scroll all the way to the right to click filter or settings, then scroll back all the way to the left to change the settings.
I wonder if I could change the layout of the toolbar in a way that the filter and settings links appear first on the left, (before the view dropdwon) instead on the right.
Has anybody done this ? I cannot find the view in SE80, probably it is generated dynamically ?
JohannesHi,
Check the cl_Salv_wd_config_table for the standard functions settings. I guess there is no option to move them left.
if_Salv_wd_standard_function or filter setting ones...check them out..
Regards,
Lekha. -
Audit settings link in oracle 10g r1 enterprise manager
Hello,
Can anybody direct me where can I find "*Audit settings*" link in Enterprise manager?
Oracle version is *10g r1*.
In the book it's written, that "Audit settings" link is located in Administration tab, under Users & Privileges region. But the version of Oracle described in the book is 10g r2. I assume the name and location of the link is different in previous version.
thanks.user467515 wrote:
Hello,
Can anybody direct me where can I find "*Audit settings*" link in Enterprise manager?
Oracle version is *10g r1*.
In the book it's written, that "Audit settings" link is located in Administration tab, under Users & Privileges region. But the version of Oracle described in the book is 10g r2. I assume the name and location of the link is different in previous version.
thanks.V10.1 was very buggy.
V10.1 & V10.2 are obsoleted & unsupported
consider upgrading to supported version V11.2 -
Regional Settings link not shows
We have users in the UK that were on a separate domain. Our Network team used a 3rd party product migrate their AD account to our domain. When the UK users click on their My Settings Link they do not see "my regional settings" I
checked the permissions and all authenticated users can edit their profile.
The odd thing is that if they click on My Settings in a site where their old domain account had permission The regional settings link is there.
We did not use the sp_migrate user feature because our Network people were doing a domain migration.
I cant see to find anything on this. Can some one assist
StacyWhen you say All Authenticated Users can Edit their profile did you mean you have assign them permission to Edit personal user information?
Check the following blog to check what I am referring.
SharePoint 2010 Foundation: Cannot change “My Settings” of a user
Amit -
Rss Settings link missing under Library settings?
Rss Settings link missing under Library settings?
Could you please help on the above?give Site Collection Admin privileges
Also check below:
http://webcache.googleusercontent.com/search?q=cache:YqNnUd4C1UYJ:jonnytreesonline.blogspot.com/2010/11/sharepoint-2010-rss-settings-missing-in.html+&cd=3&hl=en&ct=clnk&gl=in -
I was wondering if anyone knows what API calls I must make to get the 'Edit Locale Settings' Link for a given user which exists on the 'My Account' page.
Thanks,
Mike
P.S. This is for version 5.xI can tell you right now, building your own activity space to cut the steps and do what you want is about the only way to go.
What I would like to know is:
1) Did I miss a simple way of bypassing the MyAccount page to go straight to the Edit Locale Settings page?
- you could just hack the page, create a hyperlink and copy the edit local setting page url... that would work.
- however, you can never get it to redirect back to the current page the user was on, b/c that's now what this edit local setting page does.
2) Is the activity space the simplest and best way of accomplishing what I need?
- yes, b/c the locale setting needs to take place and a refresh of content needs to take place. Basically, you still need to mimick what the edit locale page did to get this to change instantaneously for the user as well as do the rest of the actions you described.
3) If not, would it be possible to create a custom tag to replace the PT:MyAccount tag so that the custom tag goes straight to the locale page?
- you could do it this way. But why not do #1 instead?
The short of it... going to the editor page is the simliest and easiest way about it. But the editor page points back to the my account page. If you want to change this behavior, you will have to hack it somehow... which is not possible really unless you build your own activity space. -
Unable to expand child links in ALV Tree
Hi,
I have written the following code for ALV Tree using function modules.
REPORT ZSID_ALV_TREE.
type pool declarations for tree
TYPE-POOLS : fibs,stree.
tables: ekko.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
it_ekpo TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
it_emptytab TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko,
wa_ekpo TYPE t_ekko.
DATA:w_repid type sy-cprog.
*Data declaration for additional node information
DATA : t_node TYPE snodetext.
*Internal table and wa decl for nodes
DATA : it_node LIKE TABLE OF t_node INITIAL SIZE 0,
wa_node LIKE t_node.
*Start of selection event
START-OF-SELECTION.
*Select the data for tree
PERFORM fetch_data.
*Build the hierarchy for tree
PERFORM build_hierarchy.
*Build Tree for display
PERFORM build_tree.
*& Form fetch_data
text
--> p1 text
<-- p2 text
FORM fetch_data .
SELECT ebeln
up to 10 rows
FROM ekko
INTO corresponding fields of TABLE it_ekko .
loop at it_ekko into wa_ekko.
SELECT ebeln ebelp statu aedat matnr menge meins netpr peinh
FROM ekpo
appending TABLE it_ekpo
where ebeln eq wa_ekko-ebeln.
endloop.
endform.
*& Form build_hierarchy
text
--> p1 text
<-- p2 text
FORM build_hierarchy .
*Building the nodes and hierarchy for tree
CLEAR : it_node[], wa_node.
wa_node-type = 'T'.
wa_node-name = 'Product Hierarchy Level'.
wa_node-tlevel = '01'.
wa_node-nlength = '35'.
wa_node-color = '4'.
wa_node-text = 'Test'.
wa_node-tlength ='20'.
wa_node-tcolor = 3.
APPEND wa_node TO it_node.
CLEAR wa_node.
loop at it_ekpo into wa_ekpo.
wa_node-type = 'P'.
wa_node-name = 'Purchasing Doc'.
wa_node-tlevel = '02'.
wa_node-nlength = '25'.
wa_node-color = '4'.
wa_node-text = wa_ekpo-ebeln.
wa_node-tlength ='20'.
wa_node-tcolor = 3.
APPEND wa_node TO it_node.
CLEAR wa_node.
*Filling the values of internal table into tree
wa_node-type = 'P'.
wa_node-name = 'Material No'.
wa_node-tlevel = '03'.
wa_node-nlength = '20'.
wa_node-color = '1'.
wa_node-text = wa_ekpo-matnr.
wa_node-tlength ='20'.
wa_node-tcolor = 4.
APPEND wa_node TO it_node.
CLEAR wa_node.
ENDLOOP.
ENDFORM. " build_hierarchy
*& Form build_tree
text
--> p1 text
<-- p2 text
FORM build_tree .
*Fm for constructing the tree
CALL FUNCTION 'RS_TREE_CONSTRUCT'
TABLES
nodetab = it_node.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
w_repid = SY-CPROG.
*FM for displaying the tree
CALL FUNCTION 'RS_TREE_LIST_DISPLAY'
EXPORTING
CALLBACK_PROGRAM = w_repid
CALLBACK_USER_COMMAND = 'USER1_COMMAND'
CALLBACK_TEXT_DISPLAY =
CALLBACK_MOREINFO_DISPLAY =
CALLBACK_COLOR_DISPLAY =
CALLBACK_TOP_OF_PAGE =
CALLBACK_GUI_STATUS =
CALLBACK_CONTEXT_MENU =
STATUS = 'IMPLICIT'
CHECK_DUPLICATE_NAME = '0'
COLOR_OF_NODE = '4'
COLOR_OF_MARK = '3'
COLOR_OF_LINK = '1'
COLOR_OF_MATCH = '5'
LOWER_CASE_SENSITIVE = 'X'
MODIFICATION_LOG = 'X'
NODE_LENGTH = 40
TEXT_LENGTH = 75
TEXT_LENGTH1 = 0
TEXT_LENGTH2 = 0
RETURN_MARKED_SUBTREE = 'X'
SCREEN_START_COLUMN = 0
SCREEN_START_LINE = 0
SCREEN_END_COLUMN = 0
SCREEN_END_LINE = 0
SUPPRESS_NODE_OUTPUT = 'X'
LAYOUT_MODE = ' '
USE_CONTROL = 'L'.
IMPORTING
F15 =
ENDFORM. " build_tree
FORM USER1_COMMAND TABLES node STRUCTURE seucomm
USING command
CHANGING value(exit)
VALUE(LIST_REFRESH).
write 'Hi'.
endform.
But I have a problem
1. I can expand the child links in tree structure when I comment the exporting parameter CALLBACK_USER_COMMAND in the function Module 'RS_TREE_LIST_DISPLAY'.
2 But when i uncomment the exporting parameter I am unable to expand the child links in output.
Please let me know if i have missed something in the code.
Useful answers will be rewarded
Regards,
SiddharthHi Sidhhart,
Check out this prog.
REPORT Z_KULDEEP_ALV_HIERARCHY
message-id zord
line-size 270.
Tables:
Vbap,
Vbak.
*& PROGRAM VARIABLES
type-pools slis.
*& INTERNAL TABLES & STRUCTURES
data:
begin of t_header occurs 0,
EXPCOL type c,
vbeln type vbak-vbeln,
audat type vbak-audat,
vkorg type vbak-vkorg,
vtweg type vbak-vtweg,
spart type vbak-spart,
end of t_header,
begin of t_item occurs 0,
vbeln type vbap-vbeln,
posnr type vbap-posnr,
matnr type vbap-matnr,
arktx type vbap-arktx,
pstyv type vbap-pstyv,
end of t_item,
t_fieldcat type standard table of slis_fieldcat_alv with header line,
t_event type standard table of slis_alv_event with header line,
x_keyinfo type slis_keyinfo_alv,
x_layout type slis_layout_alv,
x_variant like disvariant.
*& GLOBAL VARIABLES
data:
g_repid type sy-repid,
g_formname type slis_formname value 'TOP_OF_PAGE'.
*& SELECTION SCREEN *
selection-screen begin of block a with frame title text-000.
Select-options : s_date for vbak-audat obligatory.
p_date type vbak-audat.
selection-screen end of block a.
*& INITIALIZATION *
initialization.
clear : g_repid,t_header,t_item.
refresh : t_header,t_item.
g_repid = sy-repid.
*& AT SELECTION-SCREEN *
at selection-screen.
if s_date-high > sy-datum.
message e001.
endif.
start-of-selection.
select vbeln audat vkorg vtweg spart from vbak
into corresponding fields of table t_header
where audat in s_date.
select vbeln posnr matnr arktx pstyv from vbap
into table t_item
for all entries in t_header
where vbeln = t_header-vbeln.
end-of-selection.
perform sub_display_alv.
*& Form sub_display_alv
text
--> p1 text
<-- p2 text
form sub_display_alv.
*column 1
perform sub_populate_fieldcatalog using:
'VBELN' " field name
'T_HEADER' " table name
'ORDER' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 2
perform sub_populate_fieldcatalog using:
'AUDAT' " field name
'T_HEADER' " table name
'ORDERDATE' " column heading
'10' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 3
perform sub_populate_fieldcatalog using:
'VKORG' " field name
'T_HEADER' " table name
'SALES ORG' " column heading
'6' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 4
perform sub_populate_fieldcatalog using:
'VTWEG' " field name
'T_HEADER' " table name
'DIVISION' " column heading
'2' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 5
perform sub_populate_fieldcatalog using:
'SPART' " field name
'T_HEADER' " table name
'CHANNEL' " column heading
'4' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 6
perform sub_populate_fieldcatalog using:
'vbeln' " field name
'T_item' " table name
'Order' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 7
perform sub_populate_fieldcatalog using:
'POSNR' " field name
'T_ITEM' " table name
'SALES DOC.ITEM' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 8
perform sub_populate_fieldcatalog using:
'MATNR' " field name
'T_ITEM' " table name
'MATERIAL' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 9
perform sub_populate_fieldcatalog using:
'ARKTX' " field name
'T_ITEM' " table name
'SALES ORDER ITEM' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
*column 10
perform sub_populate_fieldcatalog using:
'PSTYV' " field name
'T_ITEM' " table name
'ITEM CATEGORY' " column heading
'8' " column width
' ' " fix column?
' ' " key
' ' " no display
' ' " sum this column
'X' " do not sum
' ' " input allowed?
' ' " currenct type field name
' ' " data type
'X'. " hotspot.
perform sub_assign_events.
Create a Layout for the ALV
perform sub_layout.
Define the key fields that links the header & item tables
perform sub_define_key.
dispaly list
perform sub_call_list_display.
endform. " sub_display_alv
*& Form sub_populate_fieldcatalog
text
-->P_G_FIELDCAT text
-->P_0198 text
-->P_0199 text
-->P_0200 text
-->P_0201 text
-->P_0202 text
-->P_0203 text
-->P_0204 text
-->P_0205 text
-->P_0206 text
-->P_0207 text
-->P_0208 text
-->P_0209 text
-->P_0210 text
-->P_0211 text
-->P_0212 text
-->P_0213 text
form sub_populate_fieldcatalog using
l_fieldname
l_tabname
l_column_heading
l_outputlen
l_fix_column
l_key
l_no_out
l_do_sum
l_no_sum
l_input
l_cfieldname
l_datatype
l_hotspot.
t_fieldcat-fieldname = l_fieldname.
t_fieldcat-tabname = l_tabname.
t_fieldcat-reptext_ddic = l_column_heading.
t_fieldcat-outputlen = l_outputlen.
t_fieldcat-fix_column = l_fix_column.
t_fieldcat-key = l_key.
t_fieldcat-no_out = l_no_out.
t_fieldcat-do_sum = l_do_sum.
t_fieldcat-no_sum = l_no_sum.
t_fieldcat-cfieldname = l_cfieldname.
t_fieldcat-datatype = l_datatype.
t_fieldcat-hotspot = l_hotspot.
append t_fieldcat.clear t_fieldcat.
endform. " sub_populate_fieldcatalog
*& Form sub_assign_events
text
--> p1 text
<-- p2 text
form sub_assign_events.
refresh t_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 1
importing
et_events = t_event[]
exceptions
list_type_wrong = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Read the record for the top-of-page event
read table t_event with key slis_ev_top_of_page.
if sy-subrc = 0.
t_event-form = g_formname.
append t_event.
endif.
endform. " sub_assign_events
*& Form SUB_LAYOUT
text
--> p1 text
<-- p2 text
form sub_layout.
clear x_layout.
x_layout-f2code = 'QUOTE'.
x_layout-zebra = 'X'.
x_layout-expand_fieldname = 'EXPCOL'. " Field for expand/collapse
*Stat
x_layout-colwidth_optimize = 'X'.
x_layout-no_totalline = 'X'. " 0001+
endform. " SUB_LAYOUT
*& Form SUB_DEFINE_KEY
text
--> p1 text
<-- p2 text
form sub_define_key.
clear x_keyinfo.
x_keyinfo-header01 = 'VBELN'.
x_keyinfo-item01 = 'VBELN'.
endform. " SUB_DEFINE_KEY
form top_of_page.
write :/10 sy-datum, 20 sy-pagno, 30 sy-uname.
endform.
form sub_user_command using f_ucomm like sy-ucomm
f_selfield type slis_selfield.
if f_ucomm = 'QUOTE'.
if f_selfield-fieldname = 'VBELN'.
Set Parameter id 'AUN' field f_selfield-value.
call transaction 'VA03'.
endif.
endif.
endform.
*& Form sub_call_list_display
text
--> p1 text
<-- p2 text
form sub_call_list_display.
call function 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
exporting
i_callback_program = g_repid
i_callback_user_command = 'SUB_USER_COMMAND '
is_layout = x_layout
it_fieldcat = t_fieldcat[]
i_save = 'A'
it_events = t_event[]
i_tabname_header = 'T_HEADER'
i_tabname_item = 'T_ITEM'
is_keyinfo = x_keyinfo
tables
t_outtab_header = t_header[]
t_outtab_item = t_item[]
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " sub_call_list_display -
Read the file on application server and Z table as Link in ALV report.
Hi ,
I need some suggession on following requirement.
I need to develop an ALV report where, I have to display 6 column. Four rows are kind of data which i am getting from some tables. But other two column are link to Excel files. So following are the two cases
Case 1: One of these column has a link, and when you select this link , an Excel file gets open and this Excel file is stored in Application server.
Case 2: The other column, will have a link and after selecting the link, an Excel file gets open but this time the Excel file is coming from a Z table( Stored as File name..file type and File content).
Please give some light on these two cases.
Regards
PGHi PG,
If I understood you have to handle some different links.
Well,
you can try to do this:
1- when you fill the fieldcat structure you have to add --> fieldcat-hotspot = 'X', for each column you want to handle like hotspot.
2- manage the method hotspot_click of class cl_event_receiver where you can handle your different excel files.
Let me know,
bye
Alessandro -
Hi All,
I want a solution for using icon as a link in the column of ALV.
I have tried with the text and it worked well but when i try for the icon it does not
act as a link instead a simple icon.
Could you suggest me some suitable solution for it.
Thx and Regards,
Arti.Hi Arti,
Use this code :
data:
lr_link_to_action1 TYPE REF TO cl_salv_wd_uie_link_to_action,
lr_col type cl_salv_wd_column.
lr_col = lr_column_settings->get_column( 'STATUS' ).
CREATE OBJECT lr_link_to_action1.
lr_link_to_action1->set_image_source_fieldname( 'STATUS' ).
lr_col->set_cell_editor( lr_link_to_action1 ).
In my case i am populating the status filed with the following values:
icon_led_inactive,icon_* etc..
Hope this will help you.
regards,
Madhu -
Alternating option in Display settings ( WEB DYNPRO ALV )
Hi Freinds
in My Webdynpro ALV, in Settings ( Display Settings tab ), In Table design , when i select ALTERNATING options, the alv report is not displaying in zebra format, can u please help me , if i select ALTERNATING option, the output should be display in ZEBRA format
Thanks and regards
Srini KumarSAP Help:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/4b/5eb70da225584ae10000000a42189c/content.htm -
Hyper link in ALV by classes and methods
Hiii,
I developd report using alv report using classes cl_gui_alv_grid,cl_gui_custom_container...
Output display contains field called as org_crmid..
if i click on org_crmid i have to move to another transaction named BP( its saperate screen)
kindly help me in solving this through classes..
thanks in advance..hi,
follow these steps.............
1) while creating field catalog set the propertiey hotspot = 'X' to the field on which we click.
2) in local class define method for handling hotspot_click event.
Hotspot clicking
hotspot_click
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id
es_row_no,
3) in the implementation section provide the logic
METHOD hotspot_click.
PERFORM event_hotspot_click
USING e_row_id
e_column_id.
ENDMETHOD.
*form routine contains logic
FORM event_hotspot_click
USING
p_row TYPE lvc_s_row
p_column TYPE lvc_s_col.
DATA:
lv_docnum TYPE kunnr.
READ TABLE i_alv_data INTO v_alv_data INDEX p_row-index.
IF p_column = 'CUST_ID'.
call a transaction when the cust_id is clicked
SET PARAMETER ID 'AUN' FIELD v_alv_data-cust_id.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM.
for more information follow this link...............
http://www.watto.org/program/abap/download/Z_ALV_TEMPLATE.abap
http://saplab.blogspot.com/2007/10/sample-abap-program-of-alv-grid-control.html
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c8e080d52611d2b468006094192fe3/content.htm
regards,
Ashok -
I am using ALV OOPs. I need to link F4 help to field in Selection Screen, Instead of normal method F4IF_INT_TABLE_VALUE_REQUEST, I need to implement this in ALV OOPs. Can anybody help on this.
Regards,
Naseer.Hi Naseer!
At Selection Screen you don't call method to create the ALV OO yet.
So you can you the FM 'F4IF_INT_TABLE_VALUE_REQUEST' in the event AT SELECTION-SCREEN ON VALUE-REQUEST FOR your_parameter.
I hope its helpful. -
Hi,
One of the table column in my ALV table displays Sales order with line item separated by "-".
For Ex : 70000174 - 10.
The sales order number should be a link in the table. When we click on Sales order number it should display another view.
How can I make only sales order number as a link?
Please note: Line item number should not be a link.
It should appear as below in the table.
70000174 - 10
70000175 - 10
70000176 - 10
70000177 - 10
Thanks in advance,
PrathapHi,
Having concatenatedvalue into once column and showing link to part of cell is not possible. Try to have salesorder and lineitem in 2 columns, and provide the link for salesorder.
Let your cleint know that the above case(original post) is not possible.
One more thing, POPINS are not possible for ALV. Youcan use TABLE UI element for popins.
Regards,
Lekha. -
Show link in ALV with blue background
I have an ALV with three columns. The first shown an input field, the second a dropdown, and the third a link (linkToUrl).
The first to columns are either editble or not, depending on a display/edit mode that the user can set. The third column shall always be not editable.
This all works fine, now my problem:
The column with the links has a white background, but I want it to have the same background than the not-editable columns (light blue).
I tried SET_CELL_DESIGN, but none of the colors there seems to fit. I also tried link->set_editable( false ), which shows the right color, but then, the link is not clickable anymore.
How can I display a link in an ALV column that has the same background than a non-editable, disabled input field?Hi,
Having concatenatedvalue into once column and showing link to part of cell is not possible. Try to have salesorder and lineitem in 2 columns, and provide the link for salesorder.
Let your cleint know that the above case(original post) is not possible.
One more thing, POPINS are not possible for ALV. Youcan use TABLE UI element for popins.
Regards,
Lekha.
Maybe you are looking for
-
Crystal Report Print Engine API calls from Powerbuilder
I am using Crystal Report XI R2 with Powerbuilder 9.0. I am using Crystal Report API calls using crpe32.dll to display my reports. When i run my reports from my development machine where Crystal Reports is installed the reports run properly, but whe
-
Problem about extended IDOC(urgent)
Hi experts, i have idoctype,extended idoc,and one include.. i need modify that according to the requirement.. here i will give the idoctype and extended idoc type and include program .. please help me where exactly i need to do the change and what ar
-
How do I get a "Calendars" file off my desktop. Where is it supposed to go? It has files of recent calendars in it and I'm afraid to delete it.
-
Mac versus PC - which is best value for photoshop?
Hi my background is as a Graphic Designer (accustomed to using macs). However I recently decided to go freelance as an illustrator/graphic artist. I paint in photoshop using texture brushes and also scan in my drawings. The work i do crunches alot of
-
I purchased a guns and roses album from itunes. All songs did nt down load only some. error message said i did not have enough access privledges for the operation whatever that means