Settlement for Internal and Customer Project

Hi Guys,
I am new to SAP PS.
I have a R&D project(Internal Project) and a Customer project. I know internal project is treated as Asset and settled as AUC, but can we settle it in any other way apart from cost center and GL account.
Then what about Customer project. I want to know how can we settle these both project and what are the setting and what are settlement rules used for settling Internal and Customer project?
Please need your help.
Thanks and Regards,
Roshan Malaruthu

For Internal/Investment project, you can settle all actual line items of CJIC/CJI3 to AUC then final settle capitalized items of AUC to FXA i.e. on fixed Asset using final settlement rule.
Note: You can also use GL Account or Cost Center here for settlement receiver.
Before doing this, you need to configure investment & settlement Profile. And assigned them to your Project Profile.
For Customer Project, As Santosh said is correct, you have to use Profitability Segment as settlement receiver. Just select PSG as default Obj type in settlement profile.
Also refer the link below for more details:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a9/ab7770414111d182b10000e829fbfe/content.htm?frameset=/en/6b/566b34b650f777e10000009b38f83b/frameset.htm
Regards
Shishir

Similar Messages

PS module ---Functional steps in Investment and Customer Projects in PS

Hi Experts,
I am new in PS module,Pls tell the steps in----->
1>Investment Project---The steps and transactions in PS according to Flow of PS module in Investment project from start till end of PS.
2>Customer Project--The steps and transactions in PS according to Flow of PS module in Customer Project from start till end of PS.
I    want to know functionally how the above Projects operate differently functionally with transactions and Flow.
Regards,
Rahul

Hi Rahul,
In addition to link provided above , please have a look on functional steps for Typical Investment & Customer project scenarios as follows.
Investment Project
1. Create a suitable WBS using Project builder.
2. Plan basic dates manually for WBS elements using Project planning board
3. Plan costs manually for WBs elements using Easy cost planning
4. Budget WBS elements
5. Enter actual dates during the project execution phase.
6. Assign various documents for WBS elements using Execution Services for updating commitment &
   actual costs.
7. Calculate overhead costs & carry out settlement to assets under construction or completed asset in
   Asset accounting.
Customer Project
1. Create a customer inquiry in SD.
2. Create a project (WBS & Network) using standard structures
3. Plan dates using Scheduling
4. Plan Resources
5. Plan materials by transferring Bills of Material
6. Plan costs using Network costing
7. Create sales pricing data ( Create quotation bases on project cost plan,Plan revenues for project)
8. Create a sales order with a bliing plan in SD
9. Create confirmations ( using CATS)
10. Purchase matetrials & services.
11. Document variance usign claims
12. Post Revenues using Milestone billing
13. Calculate overhead costs,carry out a results analysis & settle results analysis values to profitability
      segment.
Regards
Tushar

Non-Web Server Publishing Rule for Internal and External

Hi there,
I have a problem with my TMG and publishing SSH for Internal and External users to an internal Server.
Network:
Internal Network
SSH Server, 10.10.10.25
Internal DNS record "ssh.domain.com" pointing to 10.10.10.254
TMG Server, 10.10.10.254/192.168.0.254
External Network
External DNS record "ssh.domain.com pointing to 192.168.0.254
I want my users (internal AND external) using their SSH client to connect to ssh.domain.com and TMG to forward the request to the SSH server. Note that internal clients and the SSH server are in the same network.
I have created a custom "SSH Server" protocol with inbound TCP for port 22 and created a Non-Web Server publishing rule.
Traffic Tab: SSH Server Protocol
From Tab: Internal, External
To Tab: 10.10.10.25, original client
Networks Tabs: Internal, External
External users cann connect without a problem, all fine here. Internal users get a timout. The TMG Log says: Denied Connection (Default Rule,
The policy rules do not allow the user request) and doesn´t recognize this is an inbound request. The log gives me dest IP 10.10.10.254 and protocol SSH and not 10.10.10.25 and SSH Server.
I read a lot of networking rules and NAT/Routing, tried a bit but never got a success.
Can you help me fix or working around this and tell me whats going on there and if there a limitations in TMG I don´t know yet?
Regards,
Sascha

Hi,
According to your description, it seems that request was denied by the TMG rules so the request from the internal users
could not be forwarded to the SSH server. I would appreciate it if you can post the logs to us and the results of running ipconfig/all on the TMG server.
In addition, maybe you can change the firewall policy only from
External and add another firewall policy for the internal user to see if the issue persists.
More information:
Creating and using a server protocol
TMG
Back to Basics - Part 1: Server Publishing Rules
Best regards,
Susie

Printing confirmation of balance for vendors and customer-urgent

Hi,
Thanx Vamsi for the reply.
I have got 1 more doubt.we are using CUSTOMISED correspondence types.The annexure we give has only the open items.But the users want a list of cleared items to appear in the list.
Will the confirmation have only open items ???? or can it take even the cleared items along with it.Can the print program be modified to take even the cleared items along with it.
Kindly advise.
Thanks in advance
Regards
Karpagam

Hi,
We are using print program SAPF130K and SAPF130D for vendor and customer respectively.
My query is can we bring even the cleared items alongwith the open items in the same print program???
Now we have line items of open line items only?? As per our exploration into the program... we get only open items..
Also we are using SAP10 and SAP11 as the correspondence type.Kindly advise as to correspondence type should be changed so that it can print both the open and cleared items?
Please reply ASAP as it is very urgent.
Thanks in advance.
Regards
Karpagam

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Can I use one Business Partner repository for Vendor and Customer?

Can I use one Business Partner repository for Vendor and Customer? or do we have to use Vendor and Customer Repository separately. How can we do that? What are the pros and cons? can any one provide some examples:

Hi Deepak
The key purpose of SAP "enabling" the facility of multiple main tables in a repository is to primarily "manage" those master data objects that are related to each other. Typical examples will be a) Customer - Material, b) Supplier - Material, etc.
While, it is pretty easy to add multiple main tables in a repository, it is also important to understand the purpose of doing so based on the business requirements.
Besides, you got to be aware that in case you are "fixing" any issues with one main table (master data object) for which you have to unload the repository, the users will not be able to use the repository that has a main table defined for other master data object. Hence, there are pros and cons of using this capability of multiple main tables.
So, it is really important to understand the "W's" - What, Why, When, Where, Who of Data modeling before actually working on the "H" - How to in the SAP MDM tool.
Hope this helps.
Regards
Neelesh

UWL Integration for Material and Customer Repositories

Hello all,
Has someone done the UWL Integration for Material or Customer repositories? Do we have to write own XML Configuration file for UWL and upload? or is that supplied by SAP somewherer for Material and Customer repositories?
Any pointers in this direction are highly appreciated.
Thanks
Suman

Hi Suman,
You can create your UWL Configuration file through UWL Cofiguration file wizard.
The path is navigate to System Administration System Configuration Universal Worklist Administration.
Under Universal Worklist Content Configuration select Click to configure item types and customize views using a wizard.
Thanks
Namrata

Restrict email attachments if more than 1mb for internal and 250kb for external emails

Hi,
Restrict email attachments if more than 1mb for internal and 250kb for external emails ?
Can any one help me in this issue
Thanks
Deepan.T

Hi Deepan,
You can use transport rule to restrict the attachment size.
I use the following transport rule to reject the attachment size over 2MB with "5.7.1" information returned.
New-TransportRule "block large attach" -AttachmentSizeOver 2MB -RejectMessageEnhancedStatusCode "5.7.1"
For more information, here is an article for your reference.
New-TransportRule
http://technet.microsoft.com/en-us/library/bb125138(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Single URL for internal and external CRM access when using IFD

Hello,
At one of our client site I have setup IFD on CRM 2011. This IFD is behind TMG. My client is a big corporation therefore all CRM components including CRM, ADFS and SQL are on separate servers.
I have configured IFD using single url https://orgname.contoso.com Their IT staff wants to know why can't they use single URL for internal and external access where internal users are nto prompted for authentication
when logging on to the CRM server. I know you can do URL re-write in ADFS but they want to know the reason "why internal users can't use the same IFD URL and don't get prompted for their credentials". Text below is from their IT staff.

There are several approaches to your question. You need to set up both an internal and an external relying party trust. If you use the external URL, it will always direct you to the signin page, if you use the internal URL, it will resolve you single
sign on.
I've configured IFD for CRM multiple times, and this is how it works. CRM looks at the URL. If you use the external URL (org.domain.com), it will prompt for credentials. So what you are asking for, a single URL that works single sign on internally and prompts
externally really isn't possible.
What I recommend is:
1. make the external URL available internally
2. Configure all outlook clients against the external URL, that way you won't have to reconfigure when someone goes internal to external
3. Have users who are primarily internal use the internal URL for the web client, which will resolve single sign on
4. Have users who are primarily external use the external URL for the web client
For #1, since you only need to enter the credentials when you first configure CRM, it is in all effects single sign on.
One thing I haven't tried that may work is using IIS redirect internally to redirect the external URL to the internal URL. There is also a powershell script in the IFD guide that you can use to make the outlook client switch between the internal and external
URL's, but nothing that will give you a single URL that works as the internal relying party trust when internal and the external relying party trust when you are external.

Exchange certificates and services setup for internal and external clients access on separate domains.

I have the following on my local network.
Server DomainA -> Small Business server 2003/Exchange 2003
Server DomainB -> Windows 2008 R2/Exchange 2013
Clients Domain A -> Windows XP/Outlook 2003
Clients Domain B -> Windows 7/Outlook 2007/2010
Problem: I want clients from DomainA to log into Exchange on DomainB on the same local network.
I need to know how to setup the DNS on both domains and the certificates on the DomainB Exchange server
to accept the connection from the PC on domainA. All connections from clients on domainB to server on domainB
work correctly but when adding accounts to Outlook 2003/2007 on domainA clients I am getting certificate errors.
I have purchased certificates for mail.domainb.com and autodiscover.domainb.com but I dont know how to get
the clients on domainA to recognize those external URL's of the exchange server (with the certificates bound to them) from the internal network. Hence I get domain errors.
I am getting issues when a client on DomainA tries to add an Outlook mail profile to connect to the Exchange on DomainB
Any suggestions on how to set this up?
thanks

Domain A & Domain B are two separate AD Forests?
Users in Domain A either need mailbox-enabled user accounts that are in DomainB or a linked mailbox in Domain B to utilise the Exchange Server in DomainB. In either case with the help of the autodiscover service user can use the services in ExchangeB.
If the client machines are member of domainA and you are trying to access ExchangeB you will then need to leverage a custom XML file for autodiscover and force the Outlook client to use this file.
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<Account>
<AccountType>email</AccountType>
<Action>redirectUrl</Action>
<RedirectUrl>https://autodiscover.domain.com/autodiscover/autodiscover.xml</RedirectUrl>
</Account>
</Response>
</Autodiscover>
Then you need to configure the client machine to query that XML file by adding the following registry key:
Refer to XML file
for Outlook 2007:
HKCU\Software\Microsoft\Office\12.0\Outlook\Autodiscover
for Outlook 2010:
HKCU\Software\Microsoft\Office\14.0\Outlook\Autodiscover
STRING_value <your_namespace> = path to XML file
you can find more information in the following link.
Controlling Outlook Autodiscover behavior
http://blogs.technet.com/b/kristinw/archive/2013/04/19/controlling-outlook-autodiscover-behavior.aspx
CK

Error message when doing settlement for Internal order

Hi,
Can someone please help me to resolve the following error:
When trying to run settlement for an internal order, following error message is generated:
Item 001 Order xxxxx budget exceeded
Message no. BP603
Diagnosis
Budget was exceeded by xxxx amount in document item 001 Order xxxxxx.
Also following points may be relevant:
- System status ISBD for Internal Order is active
- There is no PR/PO for the order, direct invoice from FI is created through tcode FB50
- Availability control: Activation Type 1, Overall field ticked in customization
- Tolerance Limits: Availability control action .... Usage 85 % - Warning message, Usage 100 % - Error message
Thanks,
Ankita

Hi Loong,
Thanks for reply.
I have already tried drilling down the report S_ALR_87013019 , however following are the only things available from the report.
1. There is a year independent overall budget for the order of 92500 amt.
2. Actual in 2009 is 7870.41 and in 2010 is 77980.24. So the total actual amt is 85850.65 overall.
3. The available budget is 6649.35. i.e Over budget minus actual utililized amounts.
Since, in the report it shows that the budget is available then I am unable to figure out why does it give error for exceeding budget by amt 50100.65 at the time of settlement.
Regards,
Ankita

Capacity evaluation for internal and external workers in one work center

Hi ,
Normally in all Industries you have internal manpower to execute work. Say I have a work center named "Mechanical" , I will have 5 people working 8 Hrs for 5 days in a week. We usually configure this in capacity tab of work center for capacity category "002-Labour". In scheduling tab we configure sceduling data for a capacity category "002-labour"
In many industries , depending on load, many time, external labours are hired to give assistance to internal workers. Technically it is like adding one more capacity category "PER-Person" and adding number external labours there and in scheduling tab adding required configuration for "PER" capacity category
Total capacity for any given day would be available capacity in capacity category -002 + available capacity in PER capacity category.
However in scheduling Tab , scheduling basis can be either 002/PER.
How can we add more scheduling basis to refer to more than one capacity category ?
Any other alternative to above problem statement?

let us say, you have a work "Pump repair" which is done partly by internal workers say 2 people and 1 external labour. Let us assume the number of people in 002-labour is 2 (internal ) and capacity in capacity category (PER) which is external work center is 3 (Total 5 ).
Now if I I leave scheduling basis as blank, then system will calculate scheduling based on 002 capacity category as it is "Major" . But I want system to consider both 002 and +PER .
You are suggesting two line items "Pump Repair internal" and give 2 numbers and duration as 8 control key PM01 . Create another operation "Pump repair External" use control key PM02 (where in scheduling is enabled) where 1 number - 8 Hrs duration is maintained with another work center.
If I maintain 2 different work centers and two different operations, this will work. But for customer this is just one work and capacity evaluation should be based on capacity category 002 and PER .
How to solve this by maintaining one work center , two capacity categories in same work center and maintaining one control key PM01 in operation?

Materials used for internally and used for sales

Dear friends,
Our client PCCD has got the requirement that the some of raw materials are used in their plant and some times same raw materials sell to his customer.
Example:Pipes are used for internal consumption and as well as for selling the same pipes for Customer.
In this How to define these material as ROH and activate the sales view for ROH?
Or keep the ROH as it is for the raw materials and raw materials which are used for both the purpose can be defined as ZROH with Sales view.?
WIth This ZROH can it be used for internal use as well as for selling .
Suggest me the solution.
Regards,
canand

hi,
i think u can use Semi finished material type.
u have to activate the purchase and sale view.

Drobo for Motion and FCP projects

Does anyone have any experience with the Drobo system? I am thinking about purchasing one for my ever increasing size of projects that eat up so much space on my hard drives. I have 3 separate external drives and thought this would be a good way to combine a couple together. I want to know if this is fast enough to use for editing or is it primarily used for back-ups? Any suggestions or advise would be greatly appreciated. Thank you

Works great for me. If I had a nice Mac Pro I would absolutely use the internal drive bays for my video content, but would also have a Drobo to serve as a RAID.
As for you and me with our iMacs, the Drobo on FW800 is as fast as my internal drive. I don't see any lag time. I have 4 x 1TB Seagate drives in my Drobo. With about 1.8 TB of raw video. Not a ton, but it sure was nice to bust open all my external drives and slide them in the Drobo! I recommend keeping at least one external drive dedicated to Time Machine. And by the way, I can be editing video on my Mac and rip out one of my 1 TB drives in the Drobo with out a single skipped frame... Dude... that's cool.

Fbl1n and fbl5n display at time line item wise name for vendor and customer

Hi
Could you tell me how can I include Customer or Vendor names for each line items in transaction FBL5N and FBL1N, please? Customer Accounts are displayed well, but in several cases we also need the name of the certain Customer or Vendor account names. This would be important for consolidation of customer accounts of the same customers.
It is possible to include in these reports the u201EName1u201D, but they are empty in all cases. Could you tell me how it is possible to correct this problem, please?
ysr

hi YSR,
See if you want to have the Vendor/ Customer name or number to be displayed when you execute it. I mean on the Vendor/Customer Line Item Display.
THEN follow the below steps........
After executing the FBL1N or FBL5N Click CTRL+F8 or Change Layout. From the Pop screen select the Vendor from the Right side of the screen and then drag to the Left side of the screen, then click on Copy as.
Then Save the Layout or CTRL F12, save the layout with the new name that you want.
When you want this Layout as the default each and every time then u have to do 1 more step....
After executing the same layout go the
MENU> Settings>Layout-->Administration...
there you select the layout that u have created and then set that layout as the Default settings Check mark on DS.
So that each and every time when u execute it the same layout will be displayed with the fields that u have selected....
Hope this will solve ur issue......
Kumar........

Settlement for Internal and Customer Project

Similar Messages

Maybe you are looking for